MATERIAL SAFETY DATA SHEET. Sodium Chloride. Section 01 - Chemical And Product And Company Information

Size: px
Start display at page:

Download "MATERIAL SAFETY DATA SHEET. Sodium Chloride. Section 01 - Chemical And Product And Company Information"

Transcription

1 Page 1 of 7 MATERIAL SAFETY DATA SHEET Sodium Chloride Section 01 - Chemical And Product And Company Information Product Identifier... Fine Salt Coarse Road Salt System Saver II Pellets Product Use... Home water conditioner regeneration, de-icing agent, industrial, food Supplier Name... ClearTech Industries Inc Hanselman Avenue Saskatoon, SK. Canada S7L 5Z3 Prepared By ClearTech Industries Inc. Technical Department Phone: (306) Preparation Date April 15, Hour Emergency Phone Section 02 - Composition / Information on Ingredients Hazardous Ingredients Sodium Chloride % CAS Number Sodium Chloride Synonym(s) None Section 03 - Hazard Identification Inhalation Not toxic through inhalation, over-exposure results in slight irritation of nose and sneezing. Skin Contact / Absorption.... Not toxic to skin, Over-exposure results in irritation, inflammation, cracking and small ulcerations. Eye Contact Not toxic to the eye. Over-exposure results in mechanical irritation, watering of eyes and inflammation of conjunctivas.

2 Page 2 of 7 Ingestion..... Non-toxic. Over-exposure may cause high blood pressure, disagreeable taste, nausea and vomiting. Exposure Limits... No specific limits have been established for sodium chloride. As a guideline, limits have been established for inert or nuisance dust: ACGH/TLV-TWA: 10mg/m 3 (total dust) Section 04 - First Aid Measures Inhalation Have victim blow nose to remove dust, but discourage from sniffing. If doubt about condition of victim, consult a physician. Skin Contact / Absorption... Brush away excess material. Flush with water and seek medical attention if irritation persists. Eye Contact Flush immediately with water for at least 20 minutes. Forcibly hold eyelids apart to ensure complete irrigation of eye tissue. Seek medical attention if irritation persists. Ingestion..... Normally non-toxic. Do not induce vomiting if large amounts are ingested. Rinse mouth with water and drink 1-2 glasses of water. Seek medical attention if symptoms appear. Additional Information Symptoms may be delayed. Conditions of Flammability... Non-flammable Section 05 - Fire Fighting Means of Extinction Product does not burn. Use appropriate extinguishing media for surrounding material that is supplying the fuel to the fire. Flash Point Not applicable Auto-ignition Temperature.. Not applicable Upper Flammable Limit... Not applicable Lower Flammable Limit Not applicable

3 Page 3 of 7 Hazardous Combustible Products... When heated to decomposition, it emits toxic fumes of chlorine and sodium oxide. Special Fire Fighting Procedures... Wear NIOSH-approved self-contained breathing apparatus and protective clothing. Explosion Hazards... Not applicable Section 06 - Accidental Release Measures Leak / Spill Refer to hazard data listed. Use broom or vacuum to collect spilled material for disposal. Flush with water to remove any residue and dispose of in accordance with local and regional regulations. Deactivating Materials Not available Section 07 - Handling and Storage Handling Procedures Use proper equipment for lifting and transporting all containers. Use sensible industrial hygiene and housekeeping practices. Wash thoroughly after handling. Avoid all situations that could lead to harmful exposure. Storage Requirements Store in a cool, dry place. Keep container tightly closed, and away from incompatible materials such as oxidizers and acids. Protective Equipment Section 08 - Personal Protection and Exposure Controls Eyes..... Chemical goggles, full-face shield, or a full-face respirator is to be worn at all times when product is handled. Contact lenses should not be worn; they may contribute to severe eye injury. Respiratory... Respiratory protection is not normally required. If use creates dust formations, then a NIOSH-approved respirator with a dust cartridge is recommended. Gloves... Rubber gloves should be worn but not necessary. Wash contaminated clothing and dry thoroughly before reuse. Clothing..... Body suits, aprons, and/or coveralls of chemical resistant material should be worn but not necessary. Wash contaminated clothing and dry thoroughly before reuse. Footwear... No special footwear is required other than what is mandated at place of work.

4 Page 4 of 7 Engineering Controls Ventilation Requirements... Mechanical ventilation (dilution or local exhaust), process or personnel enclosure and control of process conditions should be provided to keep dusts below exposure limits. Supply sufficient replacement air to make up for air removed by exhaust systems. Other... Emergency shower and eyewash should be in close proximity. Section 09 - Physical and Chemical Properties Physical State Solid Odor and Appearance..... White or clear odourless crystals Odor Threshold Not applicable Specific Gravity (Water=1) Vapor Pressure (mm Hg, 20 o C).. 1 at 865 o C Vapor Density (Air=1)..... Not applicable Evaporation Rate Not available Boiling Point C Freeze/Melting Point C ph Water/Oil Distribution Coefficient... Not available Bulk Density Not available % Volatiles by Volume Solubility in Water g/100g water at 20 C Molecular Formula NaCl Molecular Weight

5 Page 5 of 7 Section 10 - Stability and Reactivity Stability Product is stable under normal conditions. Incompatibility Incompatible with bromine trifluoride, lithium, strong acids and strong oxidizers. Hazardous Products of Decomposition... When heated to decomposition, it emits toxic fumes of chlorine and sodium oxide. Polymerization Will not occur Section 11 - Toxicological Information Irritancy Mild irritant to upper repiratory tract and mucous membranes. Sensitization Not available Chronic/Acute Effects Ingestion of large amounts may cause irritation of the stomach. Synergistic Materials Not available Animal Toxicity Data LD50 (rat, oral)= 3000mg/kg LD50 (mouse, oral)= 4000mg/kg Carcinogenicity Not considered to be carcinogenic by NTP, IARC, ACGIH and OSHA. Reproductive Toxicity Not available Teratogenicity Not available Mutagenicity Not available Section 12 - Ecological Information Fish Toxicity May be harmful to freshwater aquatic species that are not saline tolerant. Biodegradability The product itslef and products of degradation are not toxic. Environmental Effects.. May be harmful to plants that are not saline tolerant.

6 Page 6 of 7 Section 13 - Disposal Consideration Waste Disposal Dispose in accordance with all federal, provincial, and/or local regulations including the Canadian Environmental Protection Act. TDG Classification Section 14 - Transportation Information Class Not regulated Group Not regulated PIN Number Not regulated Other... Secure containers (full and/or empty) with suitable hold down devises during shipment. PRODUCT CLASSIFICATION: This product has been classified on the preparation date specified at section 16 of this MSDS / SDS, for transportation in accordance with the requirements of part 2 of the Transportation of Dangerous Goods Regulations. If applicable, testing and/or published test data regarding the classification of this product are listed in the references at section 16 of this MSDS / SDS. Section 15 - Regulatory Information WHMIS Classification......Not a controlled product NOTE: THE PRODUCT LISTED ON THIS MSDS HAS BEEN CLASSIFIED IN ACCORDANCE WITH THE HAZARD CRITERIA OF THE CANADIAN CONTROLLED PRODUCTS REGULATIONS. THIS MSDS CONTAINS ALL INFORMATION REQUIRED BY THOSE REGULATIONS. Section 16 - Other Information Note: The responsibility to provide a safe workplace remains with the user. The user should consider the health hazards and safety information contained herein as a guide and should take those precautions required in an individual operation to instruct employees and develop work practice procedures for a safe work environment. The information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by the use of this material. It is the responsibility of the user to comply with all applicable laws and regulations. Attention: Receiver of the chemical goods / MSDS coordinator As part of our commitment to the Canadian Association of Chemical Distributors (CACD) Responsible Distribution initiative, ClearTech Industries Inc. and its associated companies require, as a condition of sale, that you forward the attached Material Safety Data Sheet(s) to all affected employees, customers, and end-users. ClearTech will send any available supplementary handling, health, and safety information to you at your request.

7 Page 7 of 7 If you have any questions or concerns please call our customer service or technical service department. ClearTech Industries Inc. - Locations Corporate Head Office: 2302 Hanselman Avenue, Saskatoon, SK, S7L 5Z3 Phone: Fax: Location Address Postal Code Phone Number Fax Number Richmond, B.C Horseshoe Way V7A 4X Calgary, AB. 5516E - 40 th St. S.E. T2C 2A Edmonton, AB th Street T5S 1N Saskatoon, SK Hanselman Avenue S7L 5Z Regina, SK. 555 Henderson Drive S42 5X Winnipeg, MB. 340 Saulteaux Crescent R3J 3T Mississauga, ON Bath Road L4T 1L Hour Emergency Number - All Locations