Transcription

1 Laboratory and research industries Personal and process protection SHIELD Scientific BV Galvanistraat AE EDE The Netherlands Phone: + 31 (0) Fax: + 31 (0) info@shieldscientific.com

2 The name of our company, SHIELD Scientific, reflects the particular focus we have on the laboratory and high technology sectors. Our aim is to bring to these markets personal protective equipment that for the first time is adapted to the needs of these segments. Indeed up until recently, the products typically sold to the laboratory and high technology sectors originated from the medical or industrial field. Accordingly we have set four priorities for responding to the real needs of users in these sectors. OUR VALUES Customer centric Focus on the needs of the customer. Creative & innovative Be at the forefront of product and solution development. Inspired to win Develop win-win relationships. Integrity & clarity A company with whom it is easy to do business and with a clear focus on meeting expectations. Partnership & trust Build long term partnerships with the emphasis on mutual gain. PROTECTION AGAINST CHEMICAL RISK We have discovered an aspect of the regulations that was not appreciated by some manufacturers, whilst others have chosen to ignore it. Manufacturers that have registered their gloves as PPE Category III (Complex Design) and have had their gloves tested against the 2003 version of the standards have overlooked the minimum liquid proof length requirement specified in EN374-1:2003 and outlined in EN420:2003. The latter would entail gloves being respectively 250mm and 260mm for sizes 9 (Large) and 10 (X-Large). With the exception of long length gloves, at present few disposable glove manufactures adhere to this regulatory requirement with most standard gloves being 240mm. The latter is the minimum length required for medical exam gloves. SHIELD Scientific is the first manufacturer to market gloves with a length of 260mm providing superior wrist protection from chemical splashes. PROTECTION AGAINST MICRO-BIOLOGICAL RISK We were the first manufacturer to offer a glove with an AQL of 0.65, which is the highest level of protection to penetration by micro-organisms according to EN374-2:2003. The norm in the market is an AQL of 1.5. In an effort to enhance the barrier properties of our gloves to microorganisms, we additionally test them for resistance to viral penetration. This combination of benefits makes the SHIELDskin range the natural choice for all those in the laboratory exposed to micro-biological risks. PROTECTION OF THE PROCESS For some researchers, protection of assays is the key priority. For this reason we have adopted a traceability procedure normally associated with cleanroom gloves. Likewise particular care is taken with SHIELDskin ORANGE NITRILE gloves, which undergo additional washing and chlorination to achieve a high level of cleanliness. These gloves are washed no less than nine times in contrast to the usual three washing cycles. THE HIGHEST LEVEL OF COMFORT The comfort and well-being of glove-wearers is an integral part of the development process. In particular we have focused on the risks posed by gloves to the health of users. Thus our natural rubber latex gloves have levels of protein below those typically encountered with other gloves on the market. Whilst numerous manufacturers are engaged in a rationalisation process in particular a reduction in the range of sizes in an effort to cut costs - SHIELD Scientific is committed to maintaining the five sizes in order to offer choice for optimum fit. As part of an unstinting effort to produce gloves that maximize comfort for glove-wearers, we embrace the latest advances in nitrile technology. By offering gloves based on Skin Nitrile, users can experience a level of elasticity not normally associated with nitrile gloves. Naturally these steps have been taken whilst appreciating the economic restraints in the market. «The SHIELD Scientific team welcomes you to a new era in disposable glove technology» Document printed using vegetable-based ink and on paper derived from sustainably managed forests. IMPRIM LOIRE

3 Detachable poster inside Storage, logistics & distribution In Malaysia we have storage space for up to 2000 pallets, whilst logistics management is tightly controlled. Shipments from Malaysia are made only in container to minimize the impact on the environment. Crucially stock is managed by lot in order to ensure perfect traceability. Distribution throughout Europe is provided by a network of Master Distributors. Quality system The manufacturing sites are all certified according to ISO 9001: 2000 and ISO 13485:2003. The production of latex and nitrile gloves is separate in order to avoid any risk of contamination of nitrile gloves by latex. Publications Many specialist publications have entrusted us by publishing numerous articles on subjects such as the regulations, managing glove-associated reactions etc. These magazines include Health & Safety Int., Laboratory News, Cleanroom Technology, GIT Reinraum Technik, GIT Labor, GIT Sterile Technik, Labor Practice, La Gazette du laboratoire, Face au Risque, Education We are developing tools such as posters and other information to help those responsible for safety, hygiene, quality, production and purchasing in their efforts to reduce risks, improve the process and optimize costs. On a daily basis we conduct joint visits and training of the distributor sales teams that are responsible for selling our products. Website Our website is the nerve centre for the dissemination of information. Numerous information is available to the general public covering technical questions and those relating to the activities of SHIELD Scientific. Secure access is provided to customers wishing to obtain directly more specific commercial and technical information such as certificates of analysis. 3

4 A revolution in Glove Technology PPE 1 Cat. I & III EN374-3:2003 J K L EN FOR HANDS THAT NEED EXTRA PROTECTION In response to user demand for a glove offering a higher level of protection in the laboratory but without compromising dexterity and comfort, SHIELD Scientific has developed the SHIELDskin CHEM range of gloves. Specifically SHIELDskin CHEM NEO NITRILE 300 represent a new era in glove technology combining enhanced compliance, comfort and protection. This is achieved by virtue of the multi-polymer design coupled with the elasticity afforded by Skin Nitrile technology. Apart from being registered according to Council Directive 89/686/EEC as Personal Protective Equipment Category III (Complex Design), SHIELDskin CHEM gloves qualify as chemical resistant gloves having achieved a minimum breakthrough time of thirty minutes in at least three of the twelve chemicals listed in EN374-1:2003. LEVEL 3 KEY FEATURES Striking red colour helps to highlight the suitability of this glove for applications where an extra level of protection is sought in the laboratory. Multi-polymer design and thicker gauge provide greater protection to permeation from chemical splashes. AQL of 0,65 (Level 3) according to EN374-2:2003 gives highest level of resistance to penetration from chemicals and micro-biological hazards. Unique Skin Nitrile technology providing double walled barrier resistance Extra-length of 30cm to provide enhanced protection of the wrist from chemical splashes and liquid-borne pathogens. Powder-free to minimise the risk of powder-induced dermatitis (conforms to EN ISO 21171:2006) and contamination of assays. SHIELDskin Chem Neo Nitrile % latex-free, powder-free, extra-long, ambidextrous, non-sterile, 30cm, textured fingertips Sizes XS/6 S/7 M/8 L/9 XL/10 XXL/11 Gloves/Box Boxes/Case Code PPE : personal protective equipment. 4

5 A revolution in Glove Technology PPE 1 Cat. III EN LEVEL 3 EN374-1:2003 SHIELDskin is a range of gloves specifically developed for laboratory use and focuses on meeting the needs of users in terms of comfort, compliance and protection. They are registered according to Council Directive 89/686/EEC as Personal Protective Equipment Category III (Complex Design), offering protection to irreversible risk and have been tested according to the 2003 version of the standards. The manufacture of nitrile gloves in this range is based on a new Skin Nitrile technology, which provides a skin-like sensation more akin to latex gloves. This is achieved through a double dipping process and is evident from the unique twin tone colours. The colour ORANGE, typically associated with higher risk applications, allows for easy colour differentiation. KEY FEATURES Differentiated colour ORANGE. This colour is typically associated with risk and therefore highlights to the user the potentially dangerous nature of their work. 260 mm & 300 mm, increased length in order to comply with the requirement for greater protection against liquids as defined in EN374-1 :2003. AQL of 0,65 to give a higher level of protection to micro-organisms. This has been achieved by virtue of the unique double dipping process. Powder-free, to minimize the potential consequences of powder-borne dermatitis (conforms to EN ISO 21171:2006). Accelerator-free 2 in order to reduce the risks of Allergic Contact Dermatitis (Type IV or Chemical Allergy). Micro-organism & virus resistant in order to reinforce bio-safety procedures. SHIELDskin Orange Nitrile % nitrile, powder free, extra-long, ambidextrous, non-sterile, 26cm, textured fingertips. Size XS / 6 S/ 7 M/ 8 L/ 9 XL / 10 Gloves/Box Boxes/Case Code SHIELDskin Orange Nitrile % nitrile, powder free, extra-long, ambidextrous, non-sterile, 30cm, textured fingertips. Size XS / 6 S/ 7 M/ 8 L/ 9 XL / 10 Gloves/Box Boxes/Case Code SHIELDskin Bright Latex % latex, powder free, extra-long, ambidextrous, non-sterile, 30cm, textured. Size XS / 6 S/ 7 M/ 8 L/ 9 XL / 10 Gloves/Box Boxes/Case Code PPE : personal protective equipment. 2 - SHIELDskin Bright Latex 300 excluded which are free of Thiazoles and Thiurams 5

6 Protect Your Future PPE 1 Cat. I & III For minimal risks only EN LEVEL 3 EN374-1:2003 The ecoshield range is the result of a long study into two unmet needs that today increasingly concern the research community and industry generally. ECONOMY and ECOLOGY. SHIELD Scientific was the first in the European market to offer a technical solution to address these two challenges without however compromising quality. ecoshield is therefore the perfect answer for providing economic and ecological protection in the laboratory. KEY FEATURES White colour which is not only the natural colour of latex, but also symbolises purity. 250 mm - increased length in order to comply with the requirement for greater protection against liquids as defined in EN374-1:2003. AQL of 0,65 2 to provide maximum protection barrier against micro-organisms. Micro-organism & virus resistant in order to reinforce biosafety procedures.* 150 gloves in a box, 3 i.e. 30% less packaging, 50% more volume in the same amount of space and 60% less print on packaging (the de-inking stage is the most polluting part of the recycling process). Gloves are 20% lighter whilst maintaining their sturdiness CASES OF ecoshield SAVING 700kg IN CO² AND ½ A TREE ecoshield Eco Nitrile PF 250 PPE Cat. III, 100% nitrile, powder free, longer, ambidextrous, non-sterile, 25cm, textured fingertips. Sizes XS /6 S/7 M/8 L/9 Gloves/Box Boxes/Case Code ecoshield Eco Latex 250 PPE Cat. III, 100% latex, powder free, longer, ambidextrous, non-sterile, 25cm, smooth finish. Sizes XS /6 S/7 M/8 L/9 Gloves/Box Boxes/Case Code ecoshield Natural Latex 240 PPE Cat. I, 100% latex, powder free, textured surface. Sizes XS /6 S/7 M/8 L/9 Gloves/Box Boxes/Case Code PPE : personal protective equipment. 2 - EcoSHIELD Natural Latex 240 excluded 3 - EcoSHIELD Eco Latex 250 excluded which has 100 gloves per dispenser 6

7 For hands that make a difference Class 1 MD 1 EN455 EN374-2:1994 EN374-3:1994 EN388:1994 The duoshield range of gloves offer an excellent compromise between optimal quality and costs, thereby providing a solution for laboratory personnel seeking protection against limited risks. Likewise these gloves fulfil the growing need for increased patient protection required in the health sector, hence the reference to duo or dual protection. The duoshield PFH Latex 240 and the duoshield PFH Nitrile 240 are especially designed for administering personal patient care in daily basis. The duoshield gloves are registered as Class 1 Medical Devices, according to Council Directive 93/42/EEC and are tested against EN455-1:2000, EN455-2:2009, EN455-3:2006 and EN455-4:2009. KEY FEATURES 240 mm is the minimum length for all duoshield gloves. AQL of 1,5 in accordance with EN455-1:2000 and fulfilling the requirement of EN374-2:1994 for demonstrating resistance to micro-organisms. Powder free, to minimize the risk of powder-induced dermatitis (conforms to EN ISO 21171:2006) and contamination of assays. Natural Rubber Latex Allergy: duoshield latex gloves contain 50µg/g or less of total water extractable protein using the Modified Lowry Method (EN455-3:2000). Allergic Contact Dermatitis : The use of chemical accelerators for vulcanization is limited, while they are undetectable in the finished product in order to minimize the risk of Allergic Contact Dermatitis (Type IV or Chemical Allergy). duoshield PFT Latex % latex, powder free, ambidextrous, non-sterile, 24cm, textured surface. Sizes XS / 6 S/ 7 M/ 8 L/ 9 XL / 10 Gloves/Box Boxes/Case Code duoshield PFS Latex % latex, powder free, ambidextrous, non-sterile, 24cm, smooth surface. Sizes XS / 6 S/ 7 M/ 8 L/ 9 XL / 10 Gloves/Box Boxes/Case Code duoshield PFH Latex % latex, powder free, textured surface. Sizes XS / 6 S / 7 M / 8 L / 9 XL / 10 Gloves/Box Boxes/Case Code M.D. : medical device. 7

8 For hands that make a difference duoshield LPS Latex % latex, lightly powdered, smooth surface. Sizes XS / 6 S/ 7 M/ 8 L/ 9 XL / 10 Gloves/Box Boxes/Case Code duoshield Ice Nitrile % nitrile, powder free, textured fingertips. Sizes XS / 6 S/ 7 M/ 8 L/ 9 XL / 10 Gloves/Box Boxes/Case Code duoshield PFH Nitrile % nitrile, powder free, textured fingertips. Sizes XS / 6 S / 7 M / 8 L / 9 XL / 10 Gloves/Box Boxes/Case Code