IR4015 Stainless Steel High Pressure Regulator, Internally Threadless Design Regulator

Transcription

1 IR4015 Stainless Steel High Pressure Regulator, Internally Threadless Design Regulator Customer Value Proposition: Parker Hannifin Corporation s Veriflo Division presents the IR4000 Series internally threadless pressure regulator for instrument/analyzer and semiconductor applications. The internal threadless design minimizes purge times, and reduces carrier and calibration gas usage. The IR4000 s seat materials meet the requirements for corrosive and/or higher temperature media requirements. Instrument applications include gas management systems in petrochemical/refineries and process analyzer systems. Semiconductor applications include general purpose gas management (Air, Clean Dry Air (CDA), and Plant Nitrogen). Contact Information: Parker Hannifin Corporation Veriflo Division 250 Canal Blvd. Richmond, California phone fax veriflosales@parker.com Product Features: Unique patented compression member loads the seal to the body without requiring a threaded nozzle or additional seals to atmosphere. Selection of seat materials for media compatibility and temperature applications. Fully swept design. Internally threadless seat design promotes long seat life. Convoluted, Hastelloy C-22 diaphragm provides high corrosion resistance and increases cycle life. Positive upward and downward stops increases cycle life by preventing over stroking of the diaphragm. Low internal volume reduces cycle and purge time. Meets NACE Standard MR0175. O2 Cleaned.

2 IR4015 SERIES REGULATOR DIMENSIONAL DRAWING: 1/4 A-LOK

3 DIMENSIONAL DRAWING: 3/8 A-LOK OFFER OF SALE: The items described in this document are hereby offered for sale by Parker-Hannifi n Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the detailed Offer of Sale elsewhere in this document or available at o! WARNING USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifi n Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the fi nal selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifi cations provided by the user, the user is responsible for determining that such data and specifi cations are suitable and suffi cient for all applications and reasonably foreseeable uses of the components or systems.

4 IR4015 Series Specifications Materials of Construction Wetted Body 316L Stainless Steel Diaphragm Hastelloy C-22 Std Seat Retainer Inconel Poppet Hastelloy C-22 Std Poppet Spring Inconel Carrier 316L Stainless Steel Back up Washer 316L Stainless Steel Seat PCTFE Non-Wetted Nut clamp 316L Stainless Steel Cap Nickel Plated Brass Knob (Black) ABS Plastic Operating Conditions Maximum Inlet 1250 psig (86 barg) Outlet psig (10 barg), Temperature: PCTFE -40 F to 150 F (-40 C to 66 C) Ordering Information IR4015 Basic Series psig outlet range S Materials S = 316L Stainless Steel Threaded 2 Flow Coefficient (Cv) 2 =.15Cv K Seat Material K = PCTFE Functional Performance Design Burst Pressure 3,750 psig (259 barg) Proof Pressure 1,875 psig (129 barg) Flow Capacity Standard C V.15 SEMI Flow Coeffi cient Test #F Design Leak Rate Static seal Bubble Tight Dynamic seat Bubble Tight Supply Pressure Effect.15 Cv 1.5 psig/100psig Standard Configuration 1/4 Parker A-LOK Fittings 3/8 Parker A-LOK Fittings Approx. Weight 2.3 lbs. (1.04 kg) 4PB Porting 4PB = 4 port 4T Port Style 4T = 1/4 A-LOK Fittings 6T = 3/8 A-LOK Fittings Additional Options (Designated by 4 digit code. ) Examples: 8374 = 0.06 Vent Hole, 1/4 port style, with psig gauge 8375 = 0.06 Vent Hole, 3/8 port style, with psig gauge 2007 Parker Hannifin Corporation Hastelloy C-22 is a registered trademark of Haynes International, Inc. Inconel is a registered trademark of Inco Alloys International A-LOK is a registered trademark of Parker Hannifi n Corporation Date of Issue 05/2008

5 QR4015 High Pressure Non-Tied Diaphragm Regulator Customer Value Proposition: Parker Hannifin Corporation s Veriflo Division pressents the QR4015 pressure regulator. The QR4015 is a high purity, high pressure, non-tied diaphragm regulator. It uses a metal-to-metal diaphragm seal which provides enhanced leak integrity. Contact Information: Parker Hannifin Corporation Veriflo Division 250 Canal Blvd. Richmond, California phone fax veriflosales@parker.com Product Features: VeriClean, Veriflo s customs low sulfur, high purity 316L stainless steel that enhances electropolishing, welding and corrosion resistance. Unique patented compression member loads the seal to the body without requiring a threaded nozzle or additional seals to atmosphere. Internally threadless nozzle assembly. Metal to metal diaphragm to body seal assures high leak integrity and life-time bonding. Minimal particle generation and entrapment. High cycle life. 100% Helium leak tested.

6 QR4015 SERIES REGULATOR DIMENSIONAL DRAWING: 1/4 Face Seal

7 DIMENSIONAL DRAWING: 1/2 Face Seal OFFER OF SALE: The items described in this document are hereby offered for sale by Parker-Hannifi n Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the detailed Offer of Sale elsewhere in this document or available at o! WARNING USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifi n Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the fi nal selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifi cations provided by the user, the user is responsible for determining that such data and specifi cations are suitable and suffi cient for all applications and reasonably foreseeable uses of the components or systems.

8 QR4015 Series Specifications Materials of Construction Wetted Body 316L Stainless Steel Diaphragm Hastelloy C-22 Std Seat Retainer Inconel Poppet Hastelloy C-22 Std Poppet Spring Inconel Carrier 316L Stainless Steel Back up Washer 316L Stainless Steel Seat PCTFE Non-Wetted Nut clamp 316L Stainless Steel Cap Nickel Plated Brass Knob (Black) ABS Plastic Operating Conditions Maximum Inlet 1250 psig (86 barg) Outlet psig (10 barg), Temperature: PCTFE -40 F to 150 F (-40 C to 66 C) Ordering Information QR4015 Basic Series psig outlet range S Materials S = 316L Stainless Steel Welded 2 Flow Coefficient 2 =.15Cv K Seat Material K = PCTFE 2P Porting 2P = 2 port Functional Performance Design Burst Pressure 3,750 psig (259 barg) Proof Pressure 1,875 psig (129 barg) Flow Capacity Standard C V.15 SEMI Flow Coeffi cient Test #F Design Leak Rate Static seal 2 x scc/sec He Dynamic seat 4 x 10-8 scc/sec He (Inboard test method) Supply Pressure Effect.15 Cv 1.5 psig/100 psig Standard Configuration 1/4 Parker Face Seal Fittings 1/2 Parker Face Seal Fittings Approx. Weight 2.3 lbs. (1.04 kg) Surface Finish FS Port Style FS = 1/4 Face Seal FS8 = 1/2 Face Seal Standard Ra 10 micro inches FF Port Configuration F = Female Additional Options (Designated by 4 digit code.) Examples: 8377 = 0.06 Vent Hole, 1/4 port style 8378 = 0.06 Vent Hole, 1/2 port style 2007 Parker Hannifin Corporation Hastelloy C-22 is a registered trademark of Haynes International, Inc. Inconel is a registered trademark of Inco Alloys International Date of Issue 05/2008

9 HF 1215 Series High Flow Threaded Regulator Customer Value Proposition: The HF1215 regulator offers high flow capability with an inlet pressure up to 1,250 psig. The large convoluted Hastelloy C22 diaphragm provides stable pressure control over the operational range of the regulator. The combined high flow and high inlet pressure increases the application range of the regulator thus reducing regulator inventories. Contact Information: Parker Hannifin Corporation Veriflo Division 250 Canal Blvd. Richmond, California phone fax Product Features: High 1.2 C v to meet a variety of applications. Hastelloy C-22 diaphragm for high corrosion resistance Large convoluted diaphragm provides stable pressure control. Seat material selection for media compatibility 59% larger effective area of the diaphragm than other manufacturers.

10 HF1215 SERIES REGULATOR FLOW CURVE 90 psig HF1215 Regulator with 1/2 Connections Inlet Pressure: 100 psig, N2 Outlet Pressure: 90 psig FLOW CURVE 115 psig HF1215 Regulator with 1/2 Connections Inlet Pressure: 125 psig, N2 Outlet Pressure: 115 psig

11 FLOW CURVE 150 psig HF1215 Regulator with 1/2 Connections Inlet Pressure: 300 psig, N2 Outlet Pressure: 150 psig DIMENSIONAL DRAWING OFFER OF SALE: The items described in this document are hereby offered for sale by Parker-Hannifi n Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the detailed Offer of Sale elsewhere in this document or available at o! WARNING USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifi n Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the fi nal selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifi cations provided by the user, the user is responsible for determining that such data and specifi cations are suitable and suffi cient for all applications and reasonably foreseeable uses of the components or systems.

12 HF 1215 Series Specifications Materials of Construction Wetted Body 316L Stainless Steel, Diaphragm Hastelloy C-22 Std Poppet 316L Stainless Steel Poppet Spring 316 Stainless Steel Seat PCTFE Non-Wetted Nut 17-4 Ph Cap Nickel Plated Brass Knob (Black) ABS Plastic Operating Conditions Maximum Inlet 1,250 psig (86 barg) Outlet psig (10.3 barg) Temperature: PCTFE -40 F to 150 F (-40 C to 66 C) Functional Performance Design Burst Pressure 3750 psig (259 barg) Proof Pressure 1,875 psig (129 barg) Flow Capacity Standard C V 1.2 SEMI Flow Coeffi cient Test #F L Stainless Steel Design Leak Rate Static seal 1 x 10-9 scc/sec He (Inboard test method) Dynamic seal Bubble Tight Supply Pressure Effect 1.2 C V 5.4 psig/100 psig Standard Configuration 1/2 Parker A-LOK Fittings Approx. Weight 4.2 lbs. (1.9 kg) Ordering Information HF1215 S K 4PB VY 8T Basic Series 1.2 Cv w/ psig outlet range Porting 4PB = 4 port Seat Material K = PCTFE Gauges VY = psig = No Gauge Materials S = Threaded 316L Stainless Steel Port Style 8T = 1/2 A-LOK Fitting 2007 Parker Hannifin Corporation Hastelloy C-22 is a registered trademark of Haynes International, Inc. A-LOK is a registered trademark of Parker Hannifi n Corporation Date of Issue 05/2008

13 HF 1215 Series High Flow Welded Regulator Customer Value Proposition: The HF1215 regulator offers high flow capability with an inlet pressure up to 1,250 psig. The large convoluted Hastelloy C22 diaphragm provides stable pressure control over the operational range of the regulator. The combined high flow and high inlet pressure increases the application range of the regulator thus reducing regulator inventories. Contact Information: Parker Hannifin Corporation Veriflo Division 250 Canal Blvd. Richmond, California phone fax Product Features: High 1.2 C v to meet a variety of applications. Hastelloy C-22 diaphragm for high corrosion resistance Large convoluted diaphragm provides stable pressure control. Seat material selection for media compatibility 59% larger effective area of the diaphragm than other manufacturers.

14 HF1215 SERIES REGULATOR FLOW CURVE 90 psig HF1215 Regulator with 1/2 Face Seal Connections Inlet Pressure: 100 psig, N2 Outlet Pressure: 90 psig FLOW CURVE 115 psig HF1215 Regulator with 1/2 Face Seal Connections Inlet Pressure: 125 psig, N2 Outlet Pressure: 115 psig

15 FLOW CURVE 150 psig HF1215 Regulator with 1/2 Face Seal Connections Inlet Pressure: 300 psig, N2 Outlet Pressure: 150 psig DIMENSIONAL DRAWING OFFER OF SALE: The items described in this document are hereby offered for sale by Parker-Hannifi n Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the detailed Offer of Sale elsewhere in this document or available at o! WARNING USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifi n Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the fi nal selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifi cations provided by the user, the user is responsible for determining that such data and specifi cations are suitable and suffi cient for all applications and reasonably foreseeable uses of the components or systems.

16 HF 1215 Series Specifications Materials of Construction Wetted Body 316L Stainless Steel, Diaphragm Hastelloy C-22 Std Poppet 316L Stainless Steel Poppet Spring 316 Stainless Steel Seat PCTFE Non-Wetted Nut 17-4 Ph Cap Nickel Plated Brass Knob (Black) ABS Plastic Operating Conditions Maximum Inlet 1,250 psig (86 barg) Outlet psig (10.3 barg) Temperature: PCTFE -40 F to 150 F (-40 C to 66 C) Functional Performance Design Burst Pressure 3,750 psig (259 barg) Proof Pressure 1,875 psig (129 barg) Flow Capacity Standard C V 1.2 SEMI Flow Coeffi cient Test #F L Stainless Steel Design Leak Rate Static seal 1 x 10-9 scc/sec He (Inboard test method) Dynamic seal Bubble Tight Supply Pressure Effect 1.2 C V 5.4 psig/100 psig Standard Configuration 1/2 Parker Face Seal Fittings Approx. Weight 4.2 lbs. (1.9 kg) Surface Finish Standard Ra 10 micro inches Ordering Information HF1215 W K 2P FS8 MM Basic Series 1.2 Cv w/ psig outlet range Seat Material K = PCTFE Porting 2P = 2 port Gauges = No Gauge Port Configuration M = Male F = Female Materials W = Welded 316L Stainless Steel Port Style FS8 = 1/2 Face Seal 2007 Parker Hannifin Corporation Hastelloy C-22 is a registered trademark of Haynes International, Inc. Date of Issue 05/2008