Sump. Sewage. Effluent. Premium SSE Pumps. An Advantage You Can Count On

Transcription

1 Sump Sewage Effluent Premium SSE Pumps An Advantage You Can Count On

2 Many Solutions. One Source. sc7 Series Sewage Pumps sc Series Sewage Pumps SG11 HP Grinder Series ST.E.P. Plus D Series DB Battery Back-Up

3 TABLE OF CONTENTS SUMP PUMPS P1/PC1 D1/D133/D1 DC33/DC 3 D17 3 DRAINER PRE-PLUMBED SYSTEM DP33 BATTERY BACK-UP DB1 DB EFFLUENT PUMPS EC EC3 EC 7 EC/EC7/EH7 8 EC9 9 SPECIALTY PUMPS HT3/HTX3 7 HT7 9 SEWAGE PUMPS SC 1 SC 1 SC 13 SC7/SCC7 1 SC9/SCC9 1 SEWAGE PRE-PLUMBED SYSTEMS SP 1 SP 1 GRINDER PUMPS SG11 17 COMPOSITE CURVES Effluent/Specialty Pumps 18 Sewage Pumps 19 Grinder Pumps GENERAL INFORMATION Product Nomenclature 1 HIGH HEAD EFFLUENT PUMPS ST.E.P. Plus 1 ST.E.P. Plus D Series 11 Please refer to the SSE price list for complete ordering information. 1

4 SUMP PUMPS P1/PC1 D1/D133/D1 P1 PC1 Tethered Vertical S3SSE S11SES n 1/3 HP n P1: Thermoplastic base and support column PC1: lass 3 cast iron base, stainless steel column n P1: 1-1/ (3mm) NPT discharge PC1: 1-1/ (38mm) NPT discharge n Vertical-style switch provides easy adjustment for on/off setting to specific application needs n Air-cooled motor with automatic reset overload provides Applications: Basement Sumps, Dewatering Capacities: To GPM (189 LPM) Heads: To FT (.9 M) Cont. Liquid Temp: 77 F ( C) 1/3 HP (17 RPM) PSC with thermal overload, air cooled 11 Volt, 3.FLA, 1Ph, Hz Vertical Min. Basin Diameter: 1" (3mm) tethered; 1" (mm) vertical Thermoplastic, open vane type Solids Handling: 3/8" (9.mm) Power Cord: '(1.8M) P1331V PC1331V P133/PC133 1/3 HP n 1/, 1/3, or 1/ HP n High-impact corrosion-resistant engineered resin construction n 1-1/" (3mm) FNPT or 1-1/" (38mm) MNPT discharge n Piggy-back style float for automatic or manual operation n Oil-filled motor for continuous lubrication n Easily replaceable 8 (. M) power cord with optional lengths available n Automatic reset overload provides Applications: Basement Sumps, Dewatering Capacities: To GPM ( LPM) Heads: To FT (7.3 M) Cont. Liquid Temp: 77 F ( C) 1/ HP = 8.FLA; 1/3 HP = 9.FLA; 1/ HP = 13.FLA (all 3 RPM); Shaded pole with thermal overload protection 11 Volt, 1Ph, Hz Tethered models, on/off: 1 / (3mm/1mm); or Vertical models, on/off: 8 /3 1 / (3mm/89mm) Min. Basin Diameter: 1" (3mm) tethered; 1 (mm) vertical Thermoplastic, open vane type Solids Handling: 1/8" (3.mm) Power Cord: 8 (. M) type SJTW-A/SJT D118T D118T D118V D13318V D118V D133 1/3 HP D1 1/ HP D1 1/ HP

5 SUMP PUMPS DC33/DC D17 Vertical Tethered S99SES SSES n 1/3 or 1/ HP n Rugged cast iron pump body and motor cover, exterior hardware stainless steel construction n 1-1/" (38mm) NPT discharge n Carbon/Ceramic mechanical seal n Piggy-back style float for automatic operation n Ball bearing construction for long life n Easily replaceable power cord with optional lengths available Applications: Basement Sumps, Dewatering, Light Effluent, Water Transfer Capacities: To GPM (3 LPM) Heads: To 3 FT (9.7 M) Cont. Liquid Temp: 13 F ( C) 1/3 HP = 9.8FLA; 1/HP = 1.FLA (both 1 RPM); Shaded pole with thermal overload protection 11 Volt, 1Ph, Hz Tethered models, on/off: 11/"/31/" (318mm/89mm); Vertical models, on/off: 1/"/" (1mm/1mm) Min. Basin Diameter: 1" (3mm) tethered; 1" (mm) vertical Thermoplastic, vortex type Solids Handling: 1/" (1.7mm) Power Cord: 1 (3 M) or ' ( M) 1-3, SJTW-A/SJTW DC3311T DC331T DC3313T DC3311V DC331V DC331M DC11T DC1T DC11V DC1V DC11M DC 1/ HP DC33 1/3 HP n 3/ HP n Energy efficient PSC motor n Includes check valve and universal adapter for 1-1/ (3mm) or 1-1/" (38mm) pipe n High-impact resin and stainless steel construction n Piggy-back style float for automatic or manual operation n Ball bearing construction for long life n Easily replaceable power cord with optional lengths available Applications: Basement Sumps, Dewatering, Utility Capacities: To 1 GPM (378 LPM) Heads: To FT (7. M) Cont. Liquid Temp: 77 F ( C) 3/ HP (3 RPM); PSC with thermal overload 11 Volt, 7.FLA, 1Ph, Hz Tethered models, on/off: 1 1 / /3 1 / (318mm/89mm); or Manual models Min. Basin Diameter: 1" (3mm) tethered; 1" (mm) manual Thermoplastic, closed vane type Solids Handling: 1/8" (3.mm) Power Cord: 1' (3 M) or ( M) 1-3, SJTW-A/SJTW D1711T D171T D171M D17 3/ HP

6 drainer pre-plumbed system DP33 SSES n 1/3 HP n Fully assembled, just plumb and plug n High impact engineered resin, exterior hardware stainless steel construction n 1-1/" (38mm) NPT discharge n Carbon/Ceramic mechanical seal n Piggy-back style float for automatic or manual operation n Cylindrical, -gallon (19 L) capacity n Easily replaceable power cord with optional lengths available Applications: Laundry Trays, Wet Bars, Beautician or Utility Sinks, Dehumidifier/Air-conditioning Units Capacities: To 8 GPM (18 LPM) Heads: To FT (7.3 M) Cont. Liquid Temp: 13 F ( C) 1/3 HP 11 Volt, 9.8FLA, 1Ph, Hz Vertical model, on/off: 8"/31/" (3mm/89mm) Thermoplastic, semi-vortex type Solids Handling: 1/" (.8mm) Power Cord: 1 (3 M) grounded SJTW-A/SJTW DP3311V DP33 1/3 HP

7 Battery Back-Up DB1 DB S77SES S77SES n 3 GPM (11 LPM), A -stage charging system n Thermoplastic pump and charger enclosure n 1-1/" (3mm) NPT threaded discharge; adapts to 1-1/" (3mm) and 1-1/ (38mm) piping n Ideal for standard sump pits n A multi-stage charging system (UL/CUL approved) provides most efficient charge for the battery n Plug-in style connectors for quick and easy installation n Audio and visual alarms keep you informed of status at all times n Check valve and battery case included n Can be used with more than one battery n LED Area light Applications: Emergency Dewatering Standard Volume Capacities: To 3 GPM (11 LPM) Heads: To 1 FT (.87 M) Cont. Liquid Temp: 77 F ( C) 1Vdc Charger, 9A Draw at 1' (3 M) Lift Input: 11Vac, 1Ph, Hz; Output: 1Vdc, A ( Stages) Fully automatic; computerized monitoring, control, and alarm system Min. Basin Diameter: 18" (.9mm) Thermoplastic, vane type Solids Handling: Clear water Power Cord: 8 (. M) pump and charger DB118T 7 1 n 7 GPM (178 LPM), 8.A -stage charging system n Thermoplastic pump with steel case charger enclosure n 1-1/" (3mm) NPT threaded discharge; adapts to 1-1/" (3mm) and 1-1/" (38mm) NPT n High volume ideal for active sump pits n 8.A multi-stage charging system (UL/CUL approved) with steel enclosure provides the strongest battery charge n Plug-in style connectors for quick and easy installation n Audio and visual alarms keep you informed of status at all times n Check valve and battery case included n Fits most new and existing sump pits Applications: Emergency Dewatering High Volume Capacities: To 7 GPM (178 LPM) Heads: To 18 FT (.9 M) Cont. Liquid Temp: 77 F ( C) 1Vdc Charger, 18A Draw at 1' (3 M) Lift Input: 11Vac, 1Ph, Hz; Output: 1Vdc, 8.A ( Stages) Fully automatic; computerized monitoring, control, and alarm system Min. Basin Diameter: 18" (.9mm) Thermoplastic, vane type Solids Handling: Clear water Power Cord: 8 (. M) pump and charger DB18T NOTE: Performance shown is at 1.7 Vdc with deep cycle battery. 1 1 DB NOTE: Performance shown is at 1.7 Vdc with deep cycle battery (FP1V7DCC) and acid solution (FP7QTDCC). 1 1 DB

8 EFFLUENT PUMPS EC EC3 S1SES S398SES n /1 HP n Class 3 cast iron construction n 1-1/" (38mm) NPT discharge n Carbon/Ceramic mechanical seal n Piggy-back style float for automatic or manual operation n Ball bearing construction for long life n Easily replaceable power cord with optional lengths available Applications: Effluent and Wastewater Removal, Sump Drainage, Water Transfer, Flood Control Capacities: To GPM (3 LPM) Heads: To 3 FT (9.7 M) Cont. Liquid Temp: 13 F ( C) /1 HP (1 RPM); Shaded pole with thermal overload 11 Volt, 1.FLA, 1Ph, Hz Tethered models or Manual models Min. Basin Diameter: Simplex = 18 (7mm) Duplex = 3 (7mm) Thermoplastic, non-clog, vortex type Solids Handling: 1/ (1.7mm) Power Cord: 1 (3 M) or ( M) 1-3, SJTW-A/SJTW n 1/3 HP n Complete Class 3 cast iron construction n 1-1/" (38mm) NPT discharge n Carbon/Ceramic mechanical seal n Piggy-back style float for automatic or manual operation n Ball bearing construction for long life n Easily replaceable power cord with optional lengths available Applications: Effluent and Wastewater Removal, Sump Drainage, Water Transfer, Flood Control Capacities: To GPM (8 LPM) Heads: To 1 FT (. M) Cont. Liquid Temp: 13 F ( C) 1/3 HP (1 RPM); Shaded pole with thermal overload 11 Volt, 1.FLA, 1Ph, Hz Tethered models or Manual models Min. Basin Diameter: Simplex = 18" (7mm), Duplex = 3" (7mm) Thermoplastic, non-clog, vortex type Solids Handling: 3/" (19mm) Power Cord: ' ( M) 1-3, SJTW-A/SJTW EC11T EC11M EC1T EC1M EC /1 HP C3331T EC3331M EC3 1/3 HP 8 1 3

9 SPECIALTY/EFFLUENT PUMPS HT3/HTX3 EC SSES S91SES n 1/3 HP n Class 3 cast iron construction n 1-1/" (38mm) NPT discharge n Carbon/Ceramic mechanical seal n Piggy-back style float (HT3 only) for automatic or manual operation n Ball bearing construction for long life n Easily field serviceable Applications: Boiler Blow-down Pits, Condensate Pits, Hot Water Sumps Capacities: GPM (17 LPM) Heads: To 1 FT (. M) Cont. Liquid Temp: HT = 19 F (9 C); HTX = F (93 C) 1/3 HP (1 RPM); Shaded pole with thermal overload 11 Volt, 1.FLA, 1Ph, Hz Tethered models or Manual models available Min. Basin Diameter: 18 (7mm) Cast iron, non-clog, vortex type Solids Handling: 3/ (19mm) Power Cord: ( M) 1-3, SJOOW-A/SJOW n /1 HP n Class 3 cast iron construction n " (.8mm) NPT discharge n Carbon/Ceramic mechanical seal n Piggy-back style float for automatic or manual operation n Ball bearing construction for long life n Easily replaceable power cord with optional lengths available Applications: Effluent and Wastewater Removal, Sump Drainage, Water Transfer, Flood Control Capacities: To GPM (7 LPM) Heads: To FT (1 M) Cont. Liquid Temp: 13 F ( C) /1 HP (3 RPM); PSC with thermal overload 11 Volt, 1.FLA, 1Ph, Hz Tethered models or Manual models available Min. Basin Diameter: 18" (7mm) Thermoplastic, non-clog, vortex type Solids Handling: 3/" (19mm) Power Cord: ' ( M) 1-3, SJTW-A/SJTW EC1T EC1M ECT 1 1 EC1T EC1M ϒF WATER TEMPERATURE 7ϒF WATER TEMPERATURE 3 1 EC /1 HP

10 EFFLUENT PUMPS EC/EC7/EH7 S393SES n 1/ HP and 1 HP n Class 3 cast iron construction n " (.8mm) NPT discharge n Dual Silicon Carbide mechanical seals n Piggy-back style float for automatic or manual operation n Ball bearing construction for long life n Easily replaceable power cord with optional lengths available Applications: Effluent and Wastewater Removal, Sump Drainage, Water Transfer, Flood Control Capacities: To 11 GPM (3 LPM) Heads: To 9 FT (7. M) Max. Liquid Temp: 13 F ( C) PSC with thermal overload; See chart in next column See chart in next column Tethered models or Manual models available Min. Basin Diameter: 18" (7mm) Cast iron, non-clog, open vane type Solids Handling: 3/" (19mm) Power Cord: 1' (3 M) or ' ( M) 1-3, SJTW-A/SJTW MOTOR/ELECTRICAL Model Number HP FLA Volts Phase Cycles EC1T 1/ EC1M 1/ EC71T 1/ EC71M 1/ EC7M 1/. 3 1 EC7M 1/ EC71T EC7M EC71M HIGHHEAD MODLES EH71T 1/ EH71M 1/ EH71T EH71M EH71 1 HP EC71 1 HP EH7 1/ HP EC7 1/ HP EC 1/ HP

11 SPECIALTY/EFFLUENT PUMPS HT7 EC9 S81SES Shown with PW17-8 control panel (sold separately) S33SES n 1/ HP n Class 3 cast iron construction n " (.8mm) NPT discharge n Dual Silicon Carbide mechanical seals n Ball bearing construction for long life n V jacketed lead for added durability n Easily replaceable power cord with optional lengths available Applications: High-capacity Sump, Effluent, Boiler Blow-down Capacities: To 1 GPM (378 LPM) Heads: To FT (1. M) Max. Liquid Temp: F (93 C) 1/ HP (3 RPM); PSC with thermal overload 11 Volt, 1.FLA, 1Ph, Hz Tethered model Min. Basin Diameter: 18" (7mm) Cast iron, non-clog, vortex type Solids Handling: 3/" (19mm) Power Cord: ' ( M) 1-, SOOW-A/SOOW n HP n Class 3 cast iron construction n " (.8mm) NPT discharge n Dual Silicon Carbide mechanical seals n Standard controls available for automatic operation n Ball bearing construction for long life n Easily replaceable power cord with optional lengths available Applications: Sewage, High-capacity Sump, Effluent Capacities: To 1 GPM ( LPM) Heads: To 8 FT (.9 M) Max. Liquid Temp: 13 F ( C) HP (3 RPM); PSC with thermal overload 3 Volt, 11.FLA, 1Ph, Hzz Manual model Min. Basin Diameter: 18" (7mm) Cast iron, non-clog, open vane type Solids Handling: 3/" (19mm) Power Cord: Single Phase: '( M) 1-3, SJTW-A/SJTW HT71T 1 3 C9M HT7 WATER TEMPERATURE HT7 WATER TEMPERATURE EC9 HP

12 HIGH-HEAD FILTERED EFFLUENT PUMPS ST.E.P. Plus NOW AVAILABLE n Higher HP n Higher GPM n Longer Cords STEP1 STEP STEP3-1 STEP3-11 STEP3-11 STEP3-11 STEP-11 STEP STEP 1 1/ HP STEP 1/ HP S9SES n 1/, 1 or 1-1/ HP, 11 or 3 Volt, single-phase, -wire n Superior performance n Stainless steel and composite construction n Exclusive industry dry-run capability n Enclosed and self-lubricated Nylatron shaft-bearing resists wear from sand n Heavy 3/8" (9.mm) or 7/1 (11.1mm) positive drive 3 Series stainless steel hexagonal shaft n Serviceable fiberglass reinforced thermoplastic intake screen n The 1,, 3 and GPM are industry standard 3-3/" in diameter Applications: Filtered Effluent Capacities: 1 GPM GPM (37.9 LPM LPM) Heads: 7 FT FT (8. M 77.7 M) Water-filled, hermetically sealed, thermal overload protected, NEMA standard 11 or 3 Volt, 1Ph, Hz Operations: Manual model (controls required) Minimum Diameter: " (1mm) Staging: () - 1 GPM (37.9 LPM); () - GPM (7.7 LPM); (3) - 1/ HP, 3 GPM (113. LPM); () - 1 HP, 3 GPM (113. LPM); () - 1-1/ HP, 3 GPM (113. LPM); (3) - 1 HP, GPM (189.3 LPM); () - 1-1/ HP, GPM ( LPM) Solids: 1/8" (3.mm) Power Cord: 3 Volt SOOW jacketed 1 FT leads (-wire with ground); optional, 3, and 1 FT lengths available Materials of Construction: 3 grade stainless steel and engineered composites STEP 3 1 HP STEP 3 1/ HP STEP 3 1-1/ HP STEP 1-1/ HP STEP 1 HP

13 HIGH-HEAD FILTERED EFFLUENT PUMPS ST.E.P. Plus D Applications: Effluent, Cistern, Aeration, and Irrigation Capacities: gpm 3 gpm (7. LPM 13. LPM) Heads: 7 FT FT (.9 M 8. M) Dry-wound, double ball-bearing, double-seal, thermal overload protected 11 Volt, 1Ph, Hz, -wire Operations: Manual model (controls required) Minimum Diameter: (1mm) Staging: () - 1 gpm (37.9 LPM); () - GPM (7.7 LPM); (3) - 3 gpm (113. LPM) Solids:.8 (.mm) Power Cord: 1 FT (3M), Volt, SJOW jacketed, -wire with ground Materials of Construction: 3 grade stainless steel and engineered composites S83SES 1DOM11 DOM11 3DOM n 1/ HP, 11 Volt, single-phase, -wire n Superior draw-down capability to -1/ (11mm) vs. 13-1/ (33mm) on a standard NEMA n % Reduced AMP-draw 9. amps vs. 1.7 amps on a standard NEMA n Cooler and quieter operation eliminates expensive flowinducer sleeves n UL, CSA Listed n Stainless steel and composite construction n Proven SignaSeal staging n Exclusive STA-RITE dry-run capability n Enclosed and self-lubricated Nylatron shaft-bearing resists wear from abrasives n Heavy 7/1 (1mm) positive drive 3 Series stainless steel hexagonal shaft n Stainless steel intake screen allows for.8 solids n Powered by STA-RITE motors GPM GPM 3 GPM

14 SEWAGE PUMPS SC SC S91SES S39SES n /1 HP n Class 3 cast iron construction n (.8mm) NPT discharge n Carbon/Ceramic mechanical seal n Piggy-back style float for automatic or manual operation n Ball bearing construction for long life n Easily replaceable power cord with optional lengths available Applications: Sewage, High-capacity Sump, Effluent Capacities: To 11 GPM (1 LPM) Heads: To 18 FT (. M) Cont. Liquid Temp: 13 F ( C) /1 HP (1 RPM); Shaded pole with thermal overload 11 Volt, 1.FLA, 1Ph, Hz Tethered models Min. Basin Diameter: Simplex = 18" (7mm) Duplex = 3" (7mm) Thermoplastic, vortex type Solids Handling: " (.8mm) Power Cord: 1' (3 M) or ( M) 1-3, SJTW-A/SJTW n 1/ HP n Class 3 cast iron construction n (.8mm) NPT discharge n Carbon/Ceramic mechanical seal n Piggy-back style float for automatic or manual operation n Ball bearing construction for long life n Easily replaceable power cord with optional lengths available Applications: Sewage, High-capacity Sump, Effluent Capacities: To 13 GPM (9 LPM) Heads: To 18 FT (. M) Cont. Liquid Temp: 13 F ( C) 1/ HP (1 RPM); Shaded pole with thermal overload 11 Volt, 13.FLA, 1Ph, Hz Tethered models or Manual models available Min. Basin Diameter: Simplex = 18" (7mm) Duplex = 3" (7mm) Thermoplastic, vortex type Solids Handling: " (.8mm) Power Cord: 1' (3 M) or ( M) 1-3, SJTW-A/SJTW SC11T SC1T SC11M SC11T SC1T SC1M 1 1 SC /1 HP 1 1 SC 1/ HP

15 SEWAGE PUMPS SC S3SES CONTINUOUS DUTY n 1/ HP n Class 3 cast iron construction n " (.8mm) NPT discharge n Dual Silicon Carbide mechanical seals n Piggy-back style float for automatic or manual operation n Ball bearing construction for long life n Easily replaceable power cord with optional lengths available Applications: Sewage, High-capacity Sump, Effluent Capacities: To 1 GPM ( LPM) Heads: To FT (7. M) Max. Liquid Temp: 13 F ( C) 1/ HP (17 RPM); PSC with thermal overload 11 Volt, 9.FLA, 1Ph, Hz Tethered models or Manual models Min. Basin Diameter: Simplex = 18 (7mm); Duplex = 3 (7mm) Cast iron, vane type Solids Handling: (.8mm) Power Cord: 1 (3 M) or ( M) 1-3, SJTW-A/SJTW SC11T SC1T SC1M SC 1/ HP

16 SEWAGE PUMPS SC7/SCC7 S3983SES CONTINUOUS DUTY n 1/ HP and 3/ HP n Class 3 cast iron construction n SC7: " (.8mm) NPT discharge n Dual Silicon Carbide mechanical seals n Piggy-back style float for automatic or manual operation n Ball bearing construction for long life n Easily replaceable power cord with optional lengths available Applications: Sewage, High-capacity Sump, Effluent Capacities: To 13 GPM (1 LPM) Heads: To 9 FT (8.8 M) Max. Liquid Temp: 13 F ( C) PSC with thermal overload; see chart in next column See chart in next column Tethered models or Manual models Min. Basin Diameter: Simplex = 18" (7mm) Duplex = 3" (7mm) Cast iron, vortex type Solids Handling: " (.8mm) Power Cord: Single Phase: ( M) 1-3, SJTW-A/SJTW; Three Phase: ( M) 1-, STW-A/STW MOTOR/ELECTRIC Model Number HP FLA Volts Phase Cycles SC& " DISHCHARGE SC71T 1/ SC71M 1/ SC7M 1/. 3 1 SC771T 3/ SC771M 3/ SC77M 3/ SCC71T 1/ SCC771T 3/ SCC77T 3/ SC7 3/ HP SC7 1/ HP

17 SEWAGE PUMPS SC9/SCC9 S39SES CONTINUOUS DUTY n 3/ through HP n Class 3 cast iron construction n SC9: " (.8mm) NPT discharge SCC9: 3" (7.mm) NPT discharge n Dual Silicon Carbide mechanical seals with a secondary self-lubricating lip seal n Piggy-back style float for automatic or manual operation n Ball bearing construction for long life n Easily replaceable power cord with optional lengths available Applications: Sewage, High-capacity Sump, Effluent Capacities: To 3 GPM (889 LPM) Heads: To FT (1. M) Max. Liquid Temp: 13 F ( C) PSC with thermal overload; see chart in next column See chart in next column Tethered models or Manual models Min. Basin Diameter: Simplex = 18" (7mm); Duplex = 3" (7mm) Cast iron, non-clog, open vane type Solids Handling: " (.8mm) Power Cord: Single Phase: ' ( M) 1-3, SJTW-A/SJTW; Three Phase: ' ( M) 1-, STW-A/STW MOTOR/ELECTRIC Model Number HP FLA Volts Phase Cycles SC9 " DISHCHARGE SC91T SC SC91M 1 1/ SC9M SC9M. 3 SC91M 1 1/. 3 SCC9 3" DISHCHARGE SCC91T SCC91M SCC91M SCC91M 1 1/ SCC91M 1 1/ SCC9M SCC93M SCC9M SC9/SCC9 HP SC9/SCC9 1-1/ HP SC9/SCC9 1 HP

18 SEWAGE PRE-PLUMBED SYSTEMS SP SP SSES SSES n /1 HP n Fully assembled, check valve included n Structural foam basin, 1-piece gas-tight cover n Cast iron pump with composite volute n " (.8mm) NPT discharge and vent connections n Carbon/Ceramic mechanical seal n Proprietary flush mount design for easy shipping and storage n Includes " (11.mm) hub adaptor with stainless steel clamp Applications: Sewage, High-capacity Sump, Effluent Capacities: To 11 GPM (1 LPM) Heads: To 18 FT (. M) Cont. Liquid Temp: 13 F ( C) /1 HP (1 RPM); Shaded pole with thermal overload 11 Volt, 1.FLA, 1Ph, Hz Automatic tethered Basin Size: 18" x 3" (7mm x 7mm); 3-gallon (11 L) capacity Thermoplastic, vortex type Solids Handling: ".8mm) Power Cord: ' ( M) 1-3, SJTW-A/SJTW SP1T n 1/ HP n Fully assembled, check valve included n Structural foam basin n -piece gas-tight cover for easy serviceability n Complete Class 3 cast iron pump construction n " (.8mm) NPT discharge and vent flanges n Carbon/Ceramic mechanical seal n Piggy-back style float for automatic or manual operation n Proprietary flush mount design for easy shipping and storage n Includes " (11.mm) hub adaptor with stainless steel clamp Applications: Sewage, High-capacity Sump, Effluent Capacities: To 13 GPM (9 LPM) Heads: To 18 FT (. M) Cont. Liquid Temp: 13 F ( C) 1/ HP (1 RPM); Shaded pole with thermal overload 11 Volt, 13.FLA, 1Ph, Hz Automatic tethered Basin Size: 18" x 3" (7mm x 7mm); 3-gallon (11 L) capacity Thermoplastic, vortex type Solids Handling: " (.8mm) Power Cord: ' ( M) 1-3, SJTW-A/SJTW SP1T 1 1 SP /1 HP 1 1 SP 1/ HP

19 GRINDER PUMPS SG11 MOTOR/ELECTRIC Model Number HP FLA Volts Phase* SG11M SG113M 8./.1 3/ 3 *3-phase models are pre-wired for 3 volt. S819SES n HP; single phase, 3 Volt; 3 phase, 3/ Volt n Superior grinding capabilities n High-torque, capacitor start/capacitor run motor n Dry-wound motor, better efficiency and serviceable, thermal overload protected n Continuous-duty rated at 1 F (1 C) n Dual mechanical seals silicon carbide/silicon carbide and carbon/ceramic n Dual cutter design stainless steel n Cast iron 1-vane impeller n Upper and lower shielded ball-bearings n Retrofit-table with ALL major competitors n Double-cord strain relief n Replaceable FT ( M), jacketed SOW power cord 9 3 SG11 - HP Applications: Sewage grinding, effluent and wastewater removal Capacities: GPM GPM ( LPM) Heads: FT 1 FT (7. M 3 M) Dry-wound, Cap. Start / Cap. Run, thermal overload protected 3 Volt, 1Ph, Hz, 13.FLA; 3/B, 3Ph, Hz, 8./.1FLA Operations: Manual Motor Housing: Cast iron Pump Casing: Cast iron Seal Housing: Cast iron Shaft: Stainless steel Cutters: Stainless steel, C hardened to - Rockwell C, dual cutters Cast iron, 1-vane Discharge: 1-1/" NPT (31.7mm) Power Cord: ' FT ( M), 1ga. SOW (3-phase), 1ga. SOW (1-phase) Materials of Construction: 3 grade stainless steel and engineered composites 17

20 COMPOSITE CURVES effluent/specialty PUMPS PERFORMANCE CURVES EH71 1 HP 8 7 EC9 HP EC71 1 HP 18 EC7 1/ HP EH7 1/ HP EC 1/ HP EC /1 HP HT7 1/ HP EC /1 HP 8 EC3 1/3 HP HT3/HTX3 1/3 HP NOTE: Please see page 11 for S.T.E.P Plus Series performance curves.

21 COMPOSITE CURVES SEWAGE PUMPS PERFORMANCE CURVES SC9/SCC9 1-1/ HP 3 3 SC9/SCC9 HP SC/SP /1 HP SC7 3/ HP SC7 1/ HP SC/SP 1/ HP SC9/SCC9 1 HP 1 SC 1/ HP

22 COMPOSITE CURVES GRINDER PUMPS PERFORMANCE CURVES XXXXX SG11 - HP

23 PRODUCT NOMENCLATURE Type Series HP V Cord Operation D = Drainer 1 = 1 = Not 1 = 11V = FT T = Automatic DC = Drainer Cast Iron = Applicable = 8-3V/1 = FT Tethered DB = Drainer Backup 3 = 3 8 = 1/1 3 = 8-3V/3 8 = 8 FT Switch DP = Drainer Package = 17 = 1/ = V/3 1 = 1 FT V = Automatic P = Pedestal = = 1/ = 7V/3 1 = 1 FT Vertical PC = Pedestal Cast Iron = 3 = 3/1 DC = Direct = FT Switch E = Effluent 7 = 7 33 = 1/3 Current = FT M = Manual EC = Effluent Cast Iron 8 = 8 = /1 EH = Effluent High Head 9 = 9 = 1/ S = Sewage 1 = 1 7 = 3/ SC = Sewage Cast Iron 1 = 1 1 = 1 SCC = Sewage Cast Iron 13 = 13 1 = 1-1/ Commercial = = SG = Sewage Grinder 1 = 1 SP = Sewage Package HT = High Temperature HTX = Extra High Temperature U = Utility US = Utility Submersible SAMPLE S EH 7 1 T Effluent Pump (High Head), 7 Series, 1/HP, 11V, ft. Cord, Tethered Float DC V Drainer Pump (Cast Iron), Series, 1/3HP, 11 Volt, 1 ft. Cord, Vertical Float SC 9 1 M Sewage Pump (Cast Iron), 9 Series, 1HP, 3 Volt/1PH, ft. Cord, Manual Operation 1

24 COMPOSITE CURVES NOTES

25 NOTES 3

26 COMPOSITE CURVES NOTES

27 Limited Warranty Sta-Rite warrants, to the original consumer of the products listed below, that they will be free from defects in material and workmanship for the Warranty Period from the date of original installation or manufacture as noted. Product Sump/Effluent/Sewage Products Warranty Period Whichever occurs first: 1 months from date of original installation, or 18 months from date of manufacture Our warranty will not apply to any product that has been subject to negligence, misapplication, improper installation or maintenance. In the event a three-phase submersible motor is operated with single-phase power through a phase converter, or if three-leg ambient compensated, extra-quick trip overload relays of recommended size are not used, our warranty is void. Buyer s only remedy and STA-RITE s only duty is to repair or replace defective products (at STA-RITE s choice). Buyer agrees to pay all labor and shipping charges associated with this warranty and to request warranty service through the installing dealer as soon as a problem is discovered. If warranty service is requested more than 3 days after the Warranty Period has ended, it will not be honored. STA-RITE SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL OR CONTINGENT DAMAGES WHATSOEVER. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL NOT EXTEND BEYOND THE WARRANTY PERIOD PROVIDED HEREIN. Certain states do not permit the exclusion of limitation of incidental or consequential damages or the placing of limitations on the duration of an implied warranty, therefore the limitations or exclusions herein may not apply. This warranty sets forth specific legal rights and obligations, however, additional rights may exist, which may vary from state to state. Supersedes all previous publications.

28 93 Wright Street Delavan, WI 311 Tel: Orders Fax: 8--9 CANADA: P.O. Box Trillium Drive Kitchener, Ontario NG W Phone: Orders Fax: , PENTAIR S37SSE 8//1