DOWSIL and XIAMETER brand Silicone Release Agents

Size: px
Start display at page:

Download "DOWSIL and XIAMETER brand Silicone Release Agents"

Transcription

1 Chemical and Industrial Manufacturing Consumer Solutions DOWSIL and XIAMETER brand Silicone Release Agents Product Performance Features Product Paintability High Temperature (>150 C) Dilution Stability Aqueous Products XIAMETER MEM-0039 Emulsion XIAMETER MEM-0036 Emulsion XIAMETER MEM-0349 Emulsion XIAMETER MEM-0346 Emulsion XIAMETER MEM-0347G Emulsion XIAMETER MEM-0008 Emulsion XIAMETER MEM-0037 Emulsion XIAMETER MEM-1716 Emulsion XIAMETER MEM-1101 Emulsion XIAMETER MEM-5009 Emulsion XIAMETER MEM-0062 Emulsion PS XIAMETER MEM-1450 Emulsion XIAMETER MEM-3422 Emulsion Non-Aqueous Products XIAMETER PMX-200 Silicone Fluid N/A DOWSIL Fluid N/A DOWSIL RSN-9118 Resin N/A XIAMETER OFX-0203 Fluid N/A XIAMETER OFX-0204 Fluid N/A XIAMETER OFX-0230 Fluid N/A Product Availability Global America, Asia Asia Only Europe Only = Primary Recommendation = Alternative Recommendation N/A = Not Applicable Use this guide to help you select the best DOWSIL or XIAMETER brand release agent for your application. Regulatory clearances and product availability are as of the date of publication of this technical bulletin. They are subject to change. Consult with Dow for the latest information.

2 Product Applications Product Aqueous Products Plastics* Shell Core Rubber Yarn/Thread Lubrication Fiberglass Asphalt Metals Spray Starch Adhesives Concrete Glass Wood XIAMETER MEM-0039 Emulsion XIAMETER MEM-0036 Emulsion XIAMETER MEM-0349 Emulsion XIAMETER MEM-0346 Emulsion XIAMETER MEM-0347G Emulsion XIAMETER MEM-0008 Emulsion XIAMETER MEM-0037 Emulsion XIAMETER MEM-1716 Emulsion XIAMETER MEM-1101 Emulsion XIAMETER MEM-5009 Emulsion XIAMETER MEM-0062 Emulsion PS XIAMETER MEM-1450 Emulsion XIAMETER MEM-3422 Emulsion Non-Aqueous Products XIAMETER PMX-200 Silicone Fluid DOWSIL Fluid DOWSIL RSN-9118 Resin XIAMETER OFX-0203 Fluid XIAMETER OFX-0204 Fluid XIAMETER OFX-0230 Fluid *Examples can include: epoxies, melamines, acrylics, methacrylates, phenolics, polyester, polyurethane, PVC, polypropylene, polystyrene. Web Release Product Availability Global America, Asia Asia Only Europe Only = Primary Recommendation = Alternative Recommendation

3 Product Properties* Product % Active Emulsifier Type Active Ingredient Suitable Diluent Aqueous Products XIAMETER MEM-0039 Emulsion 35 Non-ionic PDMS, Medium Viscosity Water XIAMETER MEM-0036 Emulsion 35 Non-ionic PDMS, Medium Viscosity Water XIAMETER MEM-0349 Emulsion 60 Non-ionic PDMS, Medium Viscosity Water XIAMETER MEM-0346 Emulsion 60 Non-ionic PDMS, Medium Viscosity Water XIAMETER MEM-0347G Emulsion 60 Non-ionic Silanol Functional PDMS Water XIAMETER MEM-0008 Emulsion 35 Non-ionic PDMS, Medium Viscosity Water XIAMETER MEM-0037 Emulsion 35 Anionic PDMS, High Viscosity Water XIAMETER MEM-1716 Emulsion 30 Cationic PDMS, High Viscosity Water XIAMETER MEM-1101 Emulsion 54 Anionic Silanol-PDMS, High Viscosity Water XIAMETER MEM-5009 Emulsion 49 Non-ionic Alkylarylpolysiloxane Water XIAMETER MEM-0062 Emulsion PS 55 Non-ionic PDMS, Medium Viscosity Water XIAMETER MEM-1450 Emulsion 50 Non-ionic Alkylarylpolysiloxane Water XIAMETER MEM-3422 Emulsion 50 Non-ionic Resin, Silicone Fluid Water Non-Aqueous Products XIAMETER PMX-200 Silicone Fluid 100 N/A PDMS Solvents, PDMS, VMS DOWSIL Fluid 100 N/A Resin, Silicone Fluid Solvents, PDMS, VMS DOWSIL RSN-9118 Resin 100 N/A Resin, Silicone Fluid Solvents, VMS XIAMETER OFX-0203 Fluid 100 N/A Alkylarylpolysiloxane Solvents XIAMETER OFX-0204 Fluid 100 N/A Alkylarylpolysiloxane Solvents XIAMETER OFX-0230 Fluid 100 N/A Alkylarylpolysiloxane Solvents *These values are not intended for use in preparing specifications. Product Availability Global America, Asia Asia Only Europe Only PDMS = Polydimethylsiloxane VMS = Volatile Methylsiloxane Medium Viscosity = cst High Viscosity = >10,000 cst N/A = Not Applicable

4 Product Decision Guide Is your system water-based? Will your end product be post-finished? Will your end product be post-finished? Do you need a product offering multiple releases? XIAMETER MEM-1450 Emulsion XIAMETER MEM-5009 Emulsion XIAMETER OFX-0203 Fluid XIAMETER OFX-0204 Fluid XIAMETER OFX-0230 Fluid Do you need a product offering multiple releases? Is this a hightemperature application? Is high dilution stability necessary? XIAMETER PMX-200 Silicone Fluid DOWSIL Fluid DOWSIL RSN-9118 Resin XIAMETER MEM-1101 Emulsion XIAMETER MEM-0036 Emulsion XIAMETER MEM-0039 Emulsion XIAMETER MEM-0349 Emulsion XIAMETER MEM-0346 Emulsion XIAMETER MEM-0347G Emulsion XIAMETER MEM-0008 Emulsion XIAMETER MEM-0037 Emulsion XIAMETER MEM-1716 Emulsion XIAMETER MEM-3422 Emulsion XIAMETER MEM-1101 Emulsion XIAMETER MEM-1450 Emulsion XIAMETER MEM-5009 Emulsion Two Brands to Serve You Whether you seek industry-leading innovation or greater cost efficiency, Dow can help. Dow solutions deliver specialty materials, collaborative problem-solving and innovation support tailored to your needs. See details at consumer.dow.com. For more high-quality, standard silicone materials at marketbased prices, look to our XIAMETER brand. It is online to serve you day or night. Learn more at Contact Information Visit consumer.dow.com for additional information. LIMITED WARRANTY INFORMATION PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer s tests to ensure that our products are safe, effective and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow s sole warranty is that our products will meet the sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, DOW SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Trademark of The Dow Chemical Company ( Dow ) or an affiliated company of Dow 2018 The Dow Chemical Company. All rights reserved Form No A

5 Product Information Release Coating Dow Corning 347G Emulsion FEATURES Concentrated emulsion of hydroxylendblocked PDMS fluid Highly surface active to provide good release, lubricity, water repellency and gloss Reactive chemical sites on PDMS can be reacted with various substrates Crosslinking agents and catalysts can be used to achieve a more resinous coating Contains rust inhibitor to resist rusting in the concentrated form Alkyl phenol ethoxylate (APEO) free Aqueous emulsion of polydimethylsiloxane APPLICATIONS Mould release agent in a wide variety of industrial and specialty chemical applications, applied in low concentration by spraying, dipping, brushing or wiping mould surfaces As an ingredient in automotive appearance formulations TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. CTM Test Unit Value 0176 Appearance Milky white 0862 Active material content %w/w Specific Gravity at 25 C /15.6 C g/ml ph Emulsifier type Non-ionic Diluent Water HOW TO USE Diluted with water and applied by spraying or dipping, Dow Corning 347G emulsion leaves a thin but highly effective silicone release film on mould surfaces. In most cases, this heat-stable film does not carbonize at temperatures which quickly destroy organic mould release agents: does not cause build-up on the moulds nor does it discolor rubber or plastic parts. HANDLING PRECAUTIONS Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.

6 PACKAGING This product is available in 500 ml samples, 20kg pails, 200kg drums and 1000kg containers. USABLE LIFE AND STORAGE Dow Corning 347G Emulsion will freeze, but can be reconstituted by thawing. To prevent freezing, store above 5 C. When stored between 5 35 deg C in the original unopened containers, this product has a usable life of 18 months from the date of production LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses. HEALTH AND ENVIRONMENTAL INFORMATION To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, or consult your local Dow Corning representative. LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. We help you invent the future is a trademark of Dow Corning Corporation. Dow Corning 347G Emulsion December 27, 2005 Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No DIC Dow Corning Corporation. All rights reserved.

7 Chemical Equivalency Notice As part of Dow Corning's integration into Dow Chemical, Dow Corning is rebranding some of its products names. This certificate is provided to assure the purchaser of the following product's quality and equivalency to the legacy brand product listed below for the purpose of use at the purchaser's location. XIAMETER MEM-0347G Emulsion is equivalent to: DOW CORNING 347G EMULSION XIAMETER MEM-0347G Emulsion With regard to Dow Corning's rebranding activities, there are no changes to the manufacturing facilities, processes, test methods, or equipment used for the Dow Corning products at this time. In the event of any changes to the foregoing, Dow Corning will follow its standard change management and notification process. Please refer to the product details pages on consumer.dow.com for a general description of product characteristics and sales specifications. We remind you that customers must determine the suitability of our products for the use in their applications and formulations. This information should not be used in substitution for customer tests to ensure that the products are safe, effective and fully satisfactory for the intended end-use. If you have any questions, please contact us. Mukund Parthasarathy Vice President, Global Application Engineering Technical Service XIAMETER is a Registered Trademark of The Dow Chemical Company. SILASTIC is a Registered Trademark of The Dow Chemical Company. DOW CORNING is a Registered Trademark of The Dow Chemical Company.