The Collection. Accelerate the motion.

Transcription

1 The Collection. Accelerate the motion.

2 Linear belt conveyors. Model L Max 30 m T-12 T Max 30 m Model L T = Belt Anodized aluminium frame 80x30 (mm) Anodized aluminium side walls 60 (mm) Aluminium idle rolls Ø 60 and/or Ø100(mm) and drive Metal bed 1.5(mm) thick PU belt, vulcanized belt lacing, resistant to a min. temperature of 10( C) and max. temperature of +90( C) Chain drive under the frame Max 25 m T-4 T+90 T-12 T Model LD T = Belt Anodized aluminium frame 80x30(mm) Anodized aluminium side walls 60(mm) Aluminium idle rolls Ø 60 and/or Ø 100(mm) and drive Bed 1.5(mm) thick PU belt, vulcanized belt lacing, resistant to a min. temperature of 10( C) and max. temperature of +90( C) Direct side drive Model LD T = Belt Model PL Model PL Anodized aluminium frame 120x20(mm) Anodized aluminium side walls 70(mm) Running on Nylon guides Modular PP belt, to FDA standards, side skirt board for small pieces, resistant to a min. temperature of 1( C) and max. temperature of +125 ( C) Direct side drive with torque limiter Warranty 3 YEARS

3 Accelerate the motion. Model LDL Max 120 m Max 6 m T-15 T Model LDL T = Belt T-40 T+110 Anodized aluminium frame 80x30 ( mm) with built-in side walls 65(mm) high Aluminium idle rolls and drive Metal bed 1.5(mm) thick PU belt, vulcanized belt lacing, resistant to a min. temperature of 10( C) and max. temperature of +90( C) Adjustable height Direct side drive Model LH T = Belt Anodized aluminium frame 165x45(mm) Anodized aluminium side walls 60(mm) Idle rolls Ø and/or Ø200 (mm) and drive of aluminium or steel construction Metal bed 1.5(mm) thick PU belt, vulcanized belt lacing, resistant to a min. temperature of 10( C) and max. temperature of +90( C) Chain drive under the frame Alternatively model LHD with direct side drive Model LH

4 Linear & Inclinable belt conveyors. Model LI 0-45 Model LDIL Max 3 m T-40 T Model LI Anodized aluminium frame 80x30(mm) Anodized aluminium side walls 60(mm) Aluminium idle rolls Ø60 and/or Ø100(mm) and drive Metal bed 1.5(mm) thick PU belt, resistant to a min. temperature of 10( C) and max. temperature of +90( C) provided with conveyor profiles and vulcanized belt lacing Adjustable height and inclination Drive wheels Chain drive under the frame Alternatively model LID with direct side drive Model LDIL Anodized aluminium frame 80x30 (mm) with built-in side walls 65(mm) high Aluminium idle rolls and drive Metal bed 1.5(mm) thick PU belt, vulcanized belt lacing, resistant to a min. temperature of 10( C) and max. temperature of +90( C) Adjustable height and inclination Direct side drive Model LR Model LR Belt conveyor for Robot Anodized aluminium frame 80x30(mm) Anodized aluminium side walls 60(mm) Aluminium idle rolls Ø 60 and/or Ø100(mm) and drive Metal bed 1.5(mm) thick High grip PVC belt, resistant to min. temperature of 10( C) and max. temperature of +60( ) Adjustable height and inclination Drive wheels Chain drive under the frame Alternatively model LRD with direct side drive

5 800 Accelerate the motion. Model LC 0-45 Model LC Anodized aluminium frame 80x30(mm) Anodized aluminium side walls 60(mm) Aluminium idle rolls Ø60 and/or Ø100(mm) and drive Metal bed 1.5(mm) thick PU belt, resistant to a min. temperature of 10( C) and max. temperature of +90( C) provided with conveyor profiles and vulcanized belt lacing Adjustable height and inclination Drive wheels Steel loading hopper Chain drive under the frame Alternatively model LCD with direct side drive Model LCDT Inclined belt conveyor with hopper and chute.

6 A Special conveyors. Model LSE Model LSE Anodized aluminium frame 80x30(mm) Anodized aluminium side walls 60(mm) Aluminium idle rolls dia. 60(mm) and drive Metal bed 1.5(mm) thick High grip PVC belt, resistant to min. temperature of 10( C) and max. temperature of 60( ) Adjustable height and inclination Drive wheels Chain drive under the frame Alternatively model LSED with direct side drive Model LC LG L UT L PA HA Model PLSE Anodized aluminium frame 120x20(mm) Anodized aluminium side walls 70(mm) Running on Nylon guides Modular PP belt, to FDA standards, side skirt board for small pieces, resistant to a min. temperature of 1( C) and max. temperature of +125 ( C) Direct side drive with torque limiter Adjustable height and inclination. Warranty 3 YEARS USA patent 6,827,204 - European Patent EP A1 - Brazil Patented P

7 Accelerate the motion. Model / Dimensions LSE/1003 LSE/1004 LSE/1503 LSE/1504 LSE/2003 LSE/2004 Total lenght 1150 mm 1150 mm 1150 mm 1150 mm 2000 mm 2000 mm Total width 370 mm 470 mm 370 mm 470 mm 370 mm 470 mm Belt width 300 mm 400 mm 300 mm 400 mm 300 mm 400 mm Usable belt width 288 mm 388 mm 288 mm 388 mm 288 mm 388 mm Inclination max. 45 max. 45 max. 45 max. 45 max. 45 max. 45 Sides PTEG 5 MM AISI 304 Ø LH Model PA LU UT L LG HA A PLSE /30/ PLSE /30/ PLSE /30/ PLSE /30/ PLSE /30/ PLSE /30/ PLSE /30/ PLSE /30/ PLSE /30/ PLSE /30/ PLSE /30/ PLSE /30/

8 Special conveyors. Model LD Overlying belt conveyors for bumpers Model PXL Belt conveyor with Robot protection Model LD Belt conveyor with FDA belt Model LIH Inclinable belt conveyor with tunnel metal detector Model PLR Belt conveyor with two inclination

9 Accelerate the motion. Model LSE Belt conveyor with cooling fans Model LV Double V belt conveyor Model CURVA Belt conveyors at 90 and 180

10 Belt conveyors with two inclination. Model LT Model LT Anodized aluminium frame 117x255(mm) Anodized aluminium side walls 3(mm) thick, interchangeable on the horizontal part Rolls Ø60 with centering slot Metal bed 1.5(mm) thick PU belt provided with conveyor profiles, centering guide and vulcanized belt lacing, resistant to a min. temperature of 10( C) and max. temperature of 90( C) Chain drive inside frame Belt tension adjustment with springs Adjustable height and inclination H min - H max J BB FH R L min -L max P B

11 Accelerate the motion. Model LT H min - H max J BB FH R L min -L max P B DESCRIPTION SIZE DIMENSIONS Model P J BB B L min. L max. R H min. H max. FH min. a min. a max. LTCM/O LTCM/ LTCM/ LTCM/ LTCM/ LTCM/ LTC/O LTC/ LTC/ LTC/ LTC/ LT/O LT/ LT/ LT/ LT/

12 Belt conveyors with two inclination. Model PQ Model PQ Anodized aluminium frame 117x25(mm) Anodized aluminium side walls with interchangeable quick connections on the horizontal part Die cast aluminium guard Belt running on Nylon Modular PP belt with soft PU conveyor profiles and side edge 26(mm) high. Resistant to a min. temperature 1( C) and max. temperature of +125( C) Direct side drive with torque limiter Fixed inclination (30/45/60 ) Adjustable height Warranty 3 YEARS PI HA PA HS UT HC HT HP PC PO L USA patent 6,827,204 - European Patent EP A1 - Brazil Patented P

13 Accelerate the motion. Model PA PO PI L UT HS HS HS HC HT HP HA PC PQ2 PT2 PS / / / / / /540 20/30/ PQ25 PT25 PS / / / / / /540 20/30/ PQ3 PT3 PS / / / / / /540 20/30/ PQ35 PT35 PS / / / / / /540 20/30/ PQ4 PT4 PS / / / / / /540 20/30/ PQ45 PT45 PS / / / / / /540 20/30/ PQ5 PT5 PS / / / / / /540 20/30/ PQ55 PT55 PS / / / / / /540 20/30/ PQ6 PT6 PS / / / / / /540 20/30/ PQ65 PT65 PS / / / / / /540 20/30/ PQ7 PT7 PS / / / / / /540 20/30/ PQ75 PT75 PS / / / / / /540 20/30/ PQ8 PT8 PS / / / / / /540 20/30/ PQ2 PT2 PS / / / / / /540 20/30/ PQ25 PT25 PS / / / / / /540 20/30/ PQ3 PT3 PS / / / / / /540 20/30/ PQ35 PT35 PS / / / / / /540 20/30/ PQ4 PT4 PS / / / / / /540 20/30/ PQ45 PT45 PS / / / / / /540 20/30/ PQ5 PT5 PS / / / / / /540 20/30/ PQ55 PT55 PS / / / / / /540 20/30/ PQ6 PT6 PS / / / / / /540 20/30/ PQ65 PT65 PS / / / / / /540 20/30/ PQ7 PT7 PS / / / / / /540 20/30/ PQ75 PT75 PS / / / / / /540 20/30/ PQ8 PT8 PS / / / / / /540 20/30/ PQ2 PT2 PS / / / / / /540 20/30/ PQ25 PT25 PS / / / / / /540 20/30/ PQ3 PT3 PS / / / / / /540 20/30/ PQ35 PT35 PS / / / / / /540 20/30/ PQ4 PT4 PS / / / / / /540 20/30/ PQ45 PT45 PS / / / / / /540 20/30/ PQ5 PT5 PS / / / / / /540 20/30/ PQ55 PT55 PS / / / / / /540 20/30/ PQ6 PT6 PS / / / / / /540 20/30/ PQ65 PT65 PS / / / / / /540 20/30/ PQ7 PT7 PS / / / / / /540 20/30/ PQ75 PT75 PS / / / / / /540 20/30/ PQ8 PT8 PS / / / / / /540 20/30/50 155

14 Belt conveyors with three inclination. Model PQZ Model PSZ

15 Accelerate the motion. Model LV Model LSE Model LTLZ Chute 90

16 Special conveyors. Model LTZ-LD Combination of linear belt conveyor with hopper and two inclinations Belt conveyor with air conditioner Left: Hopper chute

17 Accelerate the motion. Chute Belt conveyor with ionizer Hopper Belt conveyor with partitions Model PT/12 Belt conveyor with modular PP belt, 1200 mm wide

18 Special conveyors.

19 Accelerate the motion. Conveyor manufactured in AISI 304 stailess steel complete with water cooling tank with supply and discharge. Programmable stop/start advanced. Removable anti-sprikling sides Removable anti-sprikling sides V trensport profile Lateral sides

20 Rotary table. Model CC Components storage rotating station suitable to all kind of containers, complete with automatic counting-parts device. Model PNC Station with a reduced overall dimension, ideal for injection or blowmoulding production units Model PNS Model to transport bags

21 Accelerate the motion. Model CS Components storage rotating station with bags support, complete with automatic counting-parts device. Model with bags support with a reduced overall dimension Model CC-D Two levels containers storage station

22 Rotary chute. Model RM Designed and built to fill several containers positioned on the floor around the conveyor belt. Characteristics Radius of movement: 270 Number of programmable pieces: 9999 Piece counter functions by counting impulses or by contact clean of the machine Unloading is positioned electronically by keyboard

23 Accelerate the motion. Model PQZ RM-N

24 Stocking system. Model LA Linear storage station to transport containers Model Stock-box Multi-levels vertical storage station Containers lifting tower

25 Accelerate the motion. Model STP Universal balancing hopper weighing unit Model STPC Balancing hopper weighing unit integral with the conveyor

26 Drum separator. Model ATS German patent no P Model ATS - A German patent no P

27 Accelerate the motion. Model STN German patent no

28 Roller separator. Model STN-LK Model SB

29 Accelerate the motion. Model S5 German patent no. P Model S5 - A German patent no. P Model S5-2

30 Roller separator. Model SC1S Model S1-1 Model S1-1 Model SC1 Model S1

31 Accelerate the motion. trio-technik Maschinenbau GmbH. The system supplier for materials handling Ahead of our time In 1981, two experts in the field of plastics machines established trio-technik GmbH. Initially, the main focus was on trading in highquality conveyor belts. Parallel to this, in order to meet customers requirements, they started to develop their own products so that they could better satisfy the complex demands of materials-handling engineering in the injection moulding machine sector. They quickly developed the trading company into a modern system supplier, which sets new standards on the market with individual and tailor-made solutions for customers for the transportation and buffering of plastic parts from the injection moulding machine. Everything is pointing towards growth Today, trio-technik GmbH is a modern supplier of quality goods that has understood the signs of the times. With a new production facility and a new administrative building in our central location in Meinerzhagen, we are ready to face up to the challenges of the present and the future. Our advisory and project planning service is increasingly becoming the second string to our bow. We are developing optimised customer solutions particularly in the field of manless production. The main focus here is on cutting labour costs by increasing the running times of machines. Thanks to automatic buffering, we make it possible for you to produce continuously 24 hours a day. With our product-accompanying services, we can achieve significantly better value added for your company. Experience and know-how are our resources Today it is not merely a question of carrying out individual steps, but primarily of optimising complete production processes. We develop successful engineering and automation solutions with the help of CAD (AutoCAD 2000) and the very latest database technology. We use a matrix for all current types of machine to match the conveyor belts exactly to the machines - for all three types of waste disposal. We should be pleased to submit an individual quotation, including system layout, for you at very short notice. trio-technik GmbH complies with the special requirements of the medical industry, and in addition offers solutions in the field of clean-room technology. The specialist in product buffering Product buffering solutions are among the product highlights of trio-technik GmbH. One example is the modular type PPNW. This belt-type buffering system with several levels can cope with any task, regardless of whether the parts are delivered via a belt as bulk material or are laid down by a product removal device. A hoist lift provides an empty container, and after this has been filled passes it on to the relevant buffer belt. It is even possible to lay down two different parts with the help of the hoist lift. A Siemens PLC controller ensures an exact sequence of operations. Solutions for the metal processing sector trio-technik GmbH is aiming at increased cooperation with the metal processing sector. We can offer tailor-made system solutions for the automobile industry as well as for the electrical and electronic engineering sectors. The specifications and images shown here are merely approximate.we reserve the right to make changes to upgrade our machines. Special dimensions and accessories on request. Alternative voltages available on request.

32 In 1981, two experts in the field of plastics machines established trio-technik GmbH. Initially, the main focus was on trading in high-quality conveyor belts. Parallel to this, in order to meet customers requirements, they started to develop their own products so that they could better satisfy the complex demands of materials-handling engineering in the injection moulding machine sector. They quickly developed the trading company into a modern system supplier, which sets new standards on the market with individual and tailor-made solutions for customers for the transportation and buffering of plastic parts from the injection moulding machine. Today, trio-technik GmbH is a modern supplier of quality goods that has understood the signs of the times. With a new production facility and a new administrative building in our central location in Meinerzhagen, we are ready to face up to the challenges of the present and the future. Our advisory and project planning service is increasingly becoming the second string to our bow. We are developing optimised customer solutions particularly in the field of manless production. The main focus here is on cutting labour costs by increasing the running times of machines. Thanks to automatic buffering, we make it possible for you to produce continuously 24 hours a day. With our productaccompanying services, we can achieve significantly better value added for your company. All rights reserved and errors excepted by trio-technik - Vers Accelerate the motion. trio-technik Maschinenbau GmbH Am Rottland Meinerzhagen Germany info@trio-technik.de