RENEWABLE ENERGY, WATER & GAS

Transcription

1 Call: Visit: RENEWABLE ENERGY, WATER & GAS Including Sustainability Training Prospectus Version 17

2 Renewable Energy and Water Training Courses Introduction to PPL Training Renewable Energy Solar PV 6 Installation of Solar PV Panels 7 Solar PV Sales and Surveying 8 Part L Energy Efficiency 9 Heat Pumps Blended Learning 10 Solar Thermal Hot Water Blended Learning 11 Mechanical Ventilation and Heat Recovery (Domestic) Installer (MVHR) 12 MCS Training and Quality Management Software 13 Water Maintenance and Plumbing WaterSafe Pathway Qualification 16 Unvented Hot Water Systems 17 Water Regulations / Scottish Byelaws 18 Rainwater Harvesting and Grey Water Recycling 19 Insulation and PAS 2030 Loft and Room in Roof Insulation 22 ACOPS Gas Awareness 23 Electric Storage Heaters Installation 24 PAS 2030 Training and Quality Management Software 25 Guide to Deemed Scores 26 Cavity Wall Surveyor 27 Energy Assessing Domestic Energy Assessor (DEA) 30 Green Deal Advisor 31 Non Domestic Energy Assessor (NDEA) Level 3 32 Non Domestic Energy Assessor (NDEA) Level 4 33 We are a leading UK and International Training Provider, focusing on the delivery of Mechanical and Electrical (M&E) Installation and Safe Systems of Work (SSOW) training, with an extensive portfolio of over 150 accredited training courses. Operating from two large training facilities in York and Slough. Our courses range from new entrant skills training to the up-skilling of existing qualifications in the areas of Energy Efficiency, Electrical, Mechanical, Water Hygiene (Legionella), and Health and Safety. We also offer specialist training courses for Authorised and Competent Persons in Mechanical, Electrical, and Aeronautical Ground Lighting disciplines. We deliver high quality Renewable Energy and Water courses through our highly experienced trainers. Our courses are designed to effectively meet the requirements of a wide range of industries and sectors; including commercial and public sector organisations. All our courses deliver great value for money, but are in no way compromised. We strive to set very high standards which are outlined by the accreditation bodies such as City & Guilds and BPEC. We can arrange local accommodation for the duration of all courses, including the night before, should you wish. Rates start from 98+VAT per night, this includes bed, breakfast, an evening meal, and comes with free internet access. Booking details: Order Line: info@ppltraining.co.uk Information Training Course Index info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 3

3 Renewable Energy Training Courses Training Courses Solar PV Installer Installation of Solar PV Panels Solar PV Sales and Surveying Part L Energy Efficiency E-Learning Heat Pumps Blended Learning Solar Hot Water Blended Learning Mechanical Ventilation & Heat Recovery MCS Training and QMS Code SPV SPVP SPVSS PLEE HPS STHW MVHR MCS Days 3 Days 6 Hrs + 2 Days 6 Hrs + 2 Days Price VAT VAT VAT VAT VAT VAT VAT VAT Renewable Energy Training Courses Training Available Nationwide Training Courses - Pages info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 5

4 Code: SPV Solar PV Installer BPEC Accredited Installlation of Solar PV Panels City and Guilds Accredited Code: SPVP This course is designed to provide you with the necessary skills and knowledge required to carry out relevant calculations and installations of Solar PV Systems, in accordance with the Electricity at Work Regulations This course will cover an introduction to PV components along with health and safety awareness. It also covers different types of roof mounting equipment, shading awareness and electrical connections. This course is aimed at those who have passed the 17th Edition Wiring Regulations training course. To attend this course, you will need to be Part P registered or already have the ability to work to the standard required to join a competent person s scheme, or can provide evidence of Inspection and Testing. This course is aimed at those involved with the installation of on-roof Solar PV panels including qualified roofers and labourers. Photovoltaic panels in context of renewable technologies How a Photovoltaic systems works - principles and components Design of a PV system Installation of a Solar Photovoltaic system Comissioning and client hand-over Maintenance and fault finding 3 day training course, available in York, Slough and Onsite Introduction to PV installation systems health and safety consideratons Roof access On-roof panels and roof mounting systems Basic shading Theory and practical sessions 1 day training course, available in York, Slough and Onsite 270+VAT per delegate. Accommodation from 98+VAT per night (including DBB) 620+VAT per delegate. Accommodation from 98+VAT per night (including DBB) 1 day Solar PV Installer Update course (assessment only) and Solar PV Maintenance courses also available. See website for latest course dates. 6 info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 7

5 Code: PLEE Code: SPVSS Solar PV Sales and Surveyor City and Guilds Accredited Part L Energy Efficiency BPEC Accredited This course will provide you with the required knowledge of PV in order to successfully survey and sell installations to prospective customers. As well as giving the expertise of selling and surveying PV systems, this course will also familiarise you with PV Technologies, the Feed in Tariff (FiT), understanding the Micro-generation Certification Scheme (MCS) and will also cover Building Regulations and Planning Permission. This course will enable you to advise customers on the requirements of Part L of the Building Regulations. On successful completion of this course, delegates will be able to advise customers on the efficiency of their controls, to confirm whether or not their controls meet current standards; and advise them on any upgrades needed. Learners will also be taught to correctly size boilers and give advice to customers on the best ways to conserve household energy. This course is aimed at those companies and individuals who are about to or have just been approved for MCS PV installer certification, counter staff, customer facing installers, contract negotiators and sales staff who are either direct or telesales. Background and the need to have PV systems Basic Photovoltaic Operation MCS requirements and Feed in Tariffs Understanding the basic steps to Solar PV installation Roof orientation, roof pitch, roof covering and basic roof construction Basic wiring installations (ac and dc) Shading - how shading effects yield of the PV system SAP calculations Calculating payback periods Completing a survey and risk assessment form Practical assessment of domestic dwelling This course is recommended for plumbers, heating engineers, surveyors and renewable installers. Requirements and sources of guidance for energy efficiency standards for gas-fired and oil-fired heating appliances connected to wet heating circuits Be able to determine if a non-condensing boiler installation would be acceptable Space heating primary circuits type, design for gas-fired and oil-fired wet heating systems Appreciate the compliance standards requirement for hot water storage vessels Understand the requirements relating to the preparation and water treatment of hot water systems and wet central heating systems Commissioning of hot water systems and wet central heating systems Minimum standards for the control of gas-fired and oil-fired wet central heating systems Control of insulation of pipework for gas-fired and oil-fired wet central heating and hot water storage systems Requirements relating to standalone, glandless heating system circulators 1 day training course, available in York, Slough and Onsite 6 Hours E-Learning + 1 day Assessment, available in York and Slough 270+VAT per delegate. Accommodation from 98+VAT per night (including DBB) 175+VAT per delegate. Accommodation from 98+VAT per night (including DBB) 8 info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 9

6 Code: HPS Heat Pumps Installer Blended Learning BPEC Accredited Solar Thermal Hot Water Installer Blended Learning BPEC Accredited Code: STHW This course has been approved by the Ground Source Heat Pumps Association for operative within the plumbing, heating and renewable industries. It is designed to provide you with the skills to design, install and commission ground source, and air source heat pumps. This course will provide you with the knowledge and practical skills to install domestic Solar Thermal Hot Water systems. This course is aimed at qualified plumbers and heating engineers with a formal NVQ (or equivalent) or a number or years experience in the industry, together with qualifications Part L Energy Efficiency and Water Regulations. This course is aimed at qualified plumbers and heating engineers with a formal NVQ (or equivalent) or a number or years experience in the industry, together with qualifications Unvented Hot Water Storage, Part L Energy Efficiency and Water Regulations. Environmental backgrounds to the use of Ground Source and Air Source Heat Pumps Main types of Ground Source and Air Source Heat Pumps systems Site location Design of Ground Source and Air Source Heat Pumps systems Heat loss calculations for Ground Source and Air Source Heat Pumps Installation methods for Ground Source and Air Source Heat Pumps Commission systems for Ground Source and Air Source Heat Pumps Servicing requirements for Ground Source and Air Source Heat Pump systems Installation and maintenance Solar Thermal Collectors Solar Thermal Hot Water Storage Solar System Components System Specification System Commissioning and Handover 6 hrs (E-Learning) + 1 day (Practical Assessment), available in York, Slough and Onsite 6 hrs (E-Learning) + 2 days (Practical Assessment), available in York, Slough and Onsite 595+VAT per delegate. Accommodation from 98+VAT per night (including DBB) for practical and assessment days. 450+VAT per delegate. Accommodation from 98+VAT per night (including DBB) for practical and assessment days. Solar Thermal Hot Water Maintenance course also available, see website for latest dates. Heat Pumps Maintenance course also available, see website for latest dates info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 11

7 Code: MVHR Mechanical Ventilation and Heat Recovery (Domestic) BPEC Accredited MCS Training and Quality Management Software Trade Engine Code: MCS This course will enable you to install and/or inspect the four common ventilation systems defined in Part F of the building regulations. This is to commission and handover the system. It will also provide an understanding of the legal issues surrounding the installation of these systems and the guidance on completion and submission of all the appropriate notifications to the building control department. The Microgeneration Certification Scheme (MCS) offers Installers access to grants for installing a variety of renewable energy technologies including Solar Thermal Hot Water, Solar Photovoltaic, Heat Pumps, and Biomass. This course is aimed at delegates who have 5 years or more experience in the plumbing, heating or electrical engineering sectors or those who hold a formal qualication at NVQ Level 3 in these areas. Background and Building Regulations Domestic ventilation in context Airflow requirements and calculations Health and safety Install the common types of Domestic Ventilation System in the UK safely and efficiently Inspect and test any of the common types of Domestic Ventilation Systems in the UK Commission and provide information for any of the common types of Domestic Ventilation Systems in the UK This course is designed for installers who want to become MCS accredited in their chosen technology. Overview of the MCS Scheme Financial Incentives including Renewable Heat Incentive and Feed in Tariffs Requirements including the MCS Assessment Specification and requirements for MCS QMS How to operate your business to MCS and RECC requirements Assessment and Competency requirements 1 day training course, available nationwide 2 day training course, available nationwide 495+VAT per delegate. 45+VAT for any additonal delegates (from the same company). Accommodation from 98+VAT per night (including DBB) 470+VAT per delegate. Accommodation from 98+VAT per night (including DBB) 12 info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 13

8 Water Maintenance & Plumbing Training Courses Training Courses WaterSafe Qualification Pathway Unvented Hot Water Systems Water Regulations / Scottish Byelaws Rainwater and Greywater Harvesting Code WSQP UHWS WARE RGH Days 5 Days 3 Days Price 1,495 + VAT VAT VAT VAT Energy Assessing Training Courses Training Available Nationwide Training Courses - Pages info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 15

9 Code: WSQP WaterSafe Qualification Pathway Unvented Hot Water Systems BPEC Accredited Code: UHWS WaterSafe is the national plumbing assurance scheme jointly developed by the water industry and the plumbing sector. It has been developed as a nationally recognisable brand, bringing together seven existing Approved Contractor Schemes in the plumbing sector, as well as water companies and the key plumbing industry bodies. It is a legal requirement of the building regulations that all domestic unvented hot water systems over 15 litres capacity are maintained by a qualified person. On completion of this course you will be certified for 5 years to install, service and commission domestic hot water systems in the UK. Who is This Course for: Who is This Course For: This course will enable experienced workers who do not hold plumbing qualifications to achieve the recognition they deserve. This qualification will allow an individual to register with WaterSafe after they have joined one of the seven Accredited Contractor Schemes. This course requires an initial pre-assessment which can be booked at anytime up to a week before the course commences. On completion of this course, an onsite assessment of your work will be carried out. Key Learning Areas Covered in This Course: Installation, commissioning WC s and urinals, apply safe health and safety and working practices Safe customer care and site preparation Safe cold water systems Safe installation of sanitation systems Water supply Water Fittings Regulations and Water Byelaws in the UK The installation, commissioning and safety aspects of hot water systems for domestic use 5 day training course, available in York and Slough This course is aimed at plumbers and heating engineers who wish to gain the relevant certification to enable them to install, service and commission domestic hot water systems in the UK. To be eligible you must hold, or be working towards, a recognised trade qualification, such as NVQ/SNVQ Level 3 in Plumbing & Heating or Domestic Heating, or have evidence of a number of years experience in the plumbing or heating industry. Key Learning Areas Covered in This Course: Unvented Hot Water Systems and their operating principles Design and installation of Unvented Hot Water Storage Systems Maintenance of Unvented Hot Water Storage Systems Requirements of the Building Regulations Part L1 - conservation of fuel and power Sealed central heating systems Practical fault finding 1 day training course, available in York and Slough 250+VAT per delegate. Accommodation from 98+VAT per night (including DBB) 1,495+VAT per delegate. Accommodation from 98+VAT per night (including DBB) 16 info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 17

10 Code: WARE Water Regulations/Scottish Byelaws BPEC Accredited Rainwater and Greywater Harvesting BPEC Accredited Code: RGH On successful completion of this course you can apply to be an approved contractor for water regulation purposes. This means that you can self-certify your plumbing work and also work for housing associations and other various non-government bodies. Providing you hold other relevant certificates, you will also be able to join the WIAPS Approved Plumbers Scheme. Who is This Course For: This course is aimed at practising plumbers working to water regulation requirements. It covers the knowledge required to be assessed on the BPEC Water Regulation certificate. Key Learning Areas Covered in This Course: Introduction, background and legislation to UK Water Regulations Materials and substances in contact with water Requirements for water fittings Water system design Installation commissioning Cross connections Back flow prevention Hot and cold water services WC s and urinals Sanitary appliances and water for outside use 1 day training course, available nationwide 250+VAT per delegate. Accommodation from 98+VAT per night (including DBB) This course will enable you to gain all the underpinning skills and knowledge required to install Rainwater Harvesting and Greywater Recycling (Water Reuse) systems, including domestic and commercial applications; and how you can reduce water consumption through the use of these two technologies. Who is This Course For: The course is aimed at existing plumbers, builders and ground works engineers who require a better understanding of the design, installation and maintenance of these systems. Key Learning Areas Covered in This Course: Rainwater and greywater harvesting overview Legislation surrounding these technologies Health and safety, installation and commissioning Rainwater harvesting calculations and sizing Systems and components Water quality standards and their categories Installation, commissioning procedures, maintenance and fault finding. Resources, external bodies and the code for sustainable homes Direct and indirect rainwater and greywater harvesting systems Specification of appropriate rainwater and greywater harvesting systems 3 day training course, available in Slough 670+VAT per delegate. Accommodation from 98+VAT per night (including DBB) 18 info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 19

11 Insulation and PAS 2030 Training Courses Training Courses Loft and Room in Roof Insulation ACOPS Gas Awareness Electric Storage Heaters Installation PAS 2030 Training and QMS Guide to Deemed Scores Cavity Wall Surveyor Code LRIR ACOPS ESHI PAS GDSE CWS Days Price VAT VAT VAT VAT VAT VAT Insulation and PAS 2030 Training Training Available Nationwide Training Courses - Pages info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 21

12 Code: LRRI Loft and Room in Roof Insulation City and Guilds Accredited ACOPS Gas Awareness City and Guilds Accredited Code: ACOPS A quarter of heat is lost through the roof. Insulating a loft, attic or flat roof is an effective way to reduce heat loss and reduce heating bills. This course will provide you with both practical and background theory for installing Loft Insulation (including room in roof). On successful completion of this course you will receive a City & Guilds Accredited certification, as a proof of competence for Domestic Loft Insulation under PAS2030. This City & Guilds accredited course will enable you to gain full practical and technical awareness of gas safety, covering appliance identification, unsafe situations and risk assessments. This course is aimed at those wishing to gain theory and practical training in the installation of domestic loft and room in roof insulation. Energy efficiency considerations Different types of loft insulation Building regulations Thermal and sound insulation Health and Safety Energy Saving Site Survey Temporary lighting Board walking Setting out Installation This course is designed to educate insulation installers about the potential dangers of fitting internal, external and cavity wall insulation in buildings where combustible fuel appliances are located. The course will provide candidates with an awareness of the implications of blocked flues, ventilation requirements on gas and other appliances, flue types, general appliance types and unsafe situations. Combustion Ventilation Understanding the Gas Safety Regulations 1998 Appliance identification Unsafe situations Risk assessments Application and ventilation identification Spillage testing 1 day training course, available in nationwide 1 day training course, available nationwide 195+VAT per delegate. Accommodation from 98+VAT per night (including DBB) 295+VAT per delegate. Accommodation from 98+VAT per night (including DBB) 22 info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 23

13 Code: ESHI Electric Storage Heaters (for Compliance Inspectors) CPD Certified PAS 2030 Training and Quality Management Software Trade Engine Code: PAS This course provide you with the necessary information, knowledge and skills to carry out visual inspections of installed electric storage heaters. Furthermore the course will contribute an understanding of the various systems available and the methods of control. From attending this course you will be deemed competent to inspect installed electric storage heaters. This course is designed to allow you to carry out visual inspections of installed electric storage heaters for compliance audits. In order to install measures under schemes such as ECO and/or Green Deal Finance, Installers are required to operate a PAS2030 compatible Quality Management System (QMS). This course provides a complete bespoke online QMS designed around the unique operations of your company, the PAS 2030 standard and the Green Deal Code of Practice. This course has been designed for those wishing to gain a thorough understanding of PAS 2030 as well as how to get involved in schemes such as ECO and Green Deal. The online QMS software, includes all required documentation including, Procedures, Records and Forms to ensure compliance with the PAS2030 scheme. During the course you will be given an overview of how to access and operate the QMS software. How a storage heater works Various types of electric storage heaters Introduction to the correct installation Various controls of an electric storage heater Economy 7 and identifying installations Inspection checklist 1 day training course, available nationwide 240+VAT per delegate. Accommodation from 98+VAT per night (including DBB) Understanding ECO Overview of the various funding providers and how to get involved Understanding of the PAS2030 specification Knowledge of the processes involved when implementing a PAS2030 quality management system How to access and operate the online Quality Management System in order to meet scheme requirements and remain compliant Overview of the PAS2030 accreditation bodies and how to become certified How to access support during and beyond accreditation 1 day training course, available nationwide 495+VAT per delegate. Accommodation from 98+VAT per night (including DBB) 24 info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 25

14 Code: GDSE Guide to Deemed Scores Cavity Wall Surveyor City and Guilds Accredited Code: CWS This course has been designed to ensure compliance to the 2017 Eco scheme requirements (ECO2t). This course is suitable for companies involved in installing measures under ECO. Key Areas of ECO2t Deemed Score Matrix Percentage of Measure Installed (POMI) and Percentage of Property Treated (POPT) New rules introduced under ECO2t for insulation measures New rules introduced under ECO2t for heating measures ECO2t standardised templates access and completion 1 day training course, available in York, Slough and Onsite 270+VAT per delegate. Accommodation from 98+VAT per night (including DBB) This course will enable you to undertake cavity wall surveys in line with the new PAS2030:2017 requirements. The latest update covers the specification for the installation of energy efficiency measures (EEM) in existing buildings. This course is designed for those who wish to carry out cavity wall surveys in line with the new PAS2030:2017 requirements. The latest update covers the specification for the installation of energy efficiency measures (EEM) in existing buildings. Adherence to all statutory requirements applicable to the building to be insulated, for example the Building Regulations Carrying out risk assessments Identification of essential ventilation openings that require sleeping or safeguarding before installation, including any additional combustion ventilation required The position of all flues, whether or not they are in service, and measures that must be taken to safeguard their proper functioning Confirmation that all internal rooms and external elevations have been checked and that no areas of existing damp are present An understanding of installation techniques Repair and maintenance - finishing work Correct use of borescopes and undertake a borescope investigation Carry out a site survey, completing all relevant forms 1 day training course, available in York, Slough and Onsite 270+VAT per delegate. Accommodation from 98+VAT per night (including DBB) 26 info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 27

15 Energy Assessing Training Courses Training Courses Domestic Energy Assessor (DEA) Non Domestic Energy Assessor (NDEA) L3 Non Domestic Energy Assessor (NDEA) L4 Green Deal Advisor (GDA) Code DEA NDEA NDEA4 GDA Days 5 Days 6 Days 2 Days 2 Days Price 1,150 + VAT 1,350 + VAT VAT VAT Energy Assessing Training Courses Training Available Nationwide Training Courses - Pages info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 29

16 Code: DEA Domestic Energy Assessor (DEA) City and Guilds (Level 3) Green Deal Advisor (GDA) City and Guilds 6066 (Level 3) Accredited Code: GDA This course will provide you with the required knowledge to qualify and register as a Domestic Energy Assessor (DEA). During the course you will collect data on the dimensions, construction, heating and hot water provision of the property. This information will be entered into an approved software programme called RdSAP. The 5 domestic property types required to complete the assessments will also be included as well as completion of your City & Guilds portfolio. This course is aimed at individuals seeking employment as a Domestic Energy Assessor in order to produce Energy Performance Certificates for domestic properties. This may include Solar PV and MCS accredited companies. Each delegate receives both comprehensive theory and practical training Health and Safety (maintain safe working practices) Building construction Renewable Energy sources, heating and lighting insulation Written assessment and completion of City & Guilds Portfolio 5 properties provided which meet the C&G Matrix 5 day training course, available nationwide 900+VAT per delegate. 250+VAT for certification. Accommodation from 98+VAT per night (including DBB) This course will provide you with the required knowledge to qualify and register as a Green Deal Domestic Advisor (GDDA). GDDA s are required to assess the suitability of a domestic property for Green Deal Energy Efficiency Measures (EEM), in order to create a Green Deal Plan. The Green Deal Plan will suggest energy efficiency improvements to the property and explain the Green Deal finance options. This course is aimed at existing qualified Domestic Energy Assessors who are looking to produce Domestic Green Deal assessments and create a Domestic Green Deal plan. How to provide information to customers on the principles, financing and operation of the Green Deal Undertake property assessments and offer advice Prepare and issue Green Deal Domestic Advice reports Explaining the Green Deal Advice report to the domestic customer Includes portfolio completion, all witness statements and EPC s All 3 required properties are arranged and assessed during the course 2 day training course, available nationwide 675+VAT per delegate. Accommodation from 98+VAT per night (including DBB) 3 day course also available from 775+VAT. See website for latest course dates info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 31

17 Code: NDEA Non Domestic Energy Assessor (NDEA) City and Guilds (Level 3) Non Domestic Energy Assessor (NDEA) City and Guilds (Level 4) Code: NDEA This course will provide you with the required knowledge to qualify and register as a Non Domestic Energy Assessor (NDEA). During the course you will collect data on the dimensions, construction, heating and hot water provision of the property. This information will be entered into an approved software programme called Design Builder (SBEM). This course includes 3 commercial property types required to complete the assessments and completion of your City & Guilds portfolio. This course will enable successful delegates to assess complex and new build non domestic properties, this course will also help you to calculate precise U-Values for these types of buildings. This course is aimed at existing Non Domestic Energy Assessors wishing to qualify to assess Level 4 non-domestic buildings, including new-build non domestic properties. This course is aimed at existing qualified Domestic Energy Assessors who are looking to produce Energy Performance Certificates for commercial properties. All individuals are required to register with one of the accreditation bodies such as Elmhurst or Northgate. Each delegate receives both comprehensive theory and practical training Health and Safety (maintain safe working practices) Building construction Renewable Energy sources, heating and lighting Written assessment and completion of City & Guilds Portfolio 3 commercial properties provided to produce EPC s using specialist software 6 day training course, available nationwide Training in the industry leading Design Builder software. In-depth familiarisation with Part L of the Building Regulations, as this affects assessment of non-domestic properties. Full portfolio build, enabling candidates to achieve the required level of competence and complete their qualification during the course. 2 day training course, available nationwide 699+VAT per delegate. Accommodation from 98+VAT per night (including DBB) 1,350+VAT per delegate. Accommodation from 98+VAT per night (including DBB) 32 info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 33

18 Renewable Energy and Water Training Course Index Course Name Code Days Price Course Name Code Days Price Solar PV Installer SPV 3 Days VAT Rainwater and Greywater Harvesting RGH 3 Days VAT Installation of Solar PV Panels SPVP VAT MCS Training and QMS MCS VAT Solar PV Sales and Surveying SPVSS VAT Loft and Room in Roof LRIR VAT Part L Energy Efficiency PLEE VAT ACOPS Gas Awareness ACOPS VAT Heat Pumps Installer Blended Learning HPS 6 Hrs + 2 Days VAT Electric Storage Heaters Installation ESHI VAT Solar Thermal Hot Water Installer Blended Learning Mechanical Ventilation and Heat Recovery WaterSafe Qualification Pathway Unvented Hot Water Systems Water Regulations Scottish Byelaws STHW MVHR WSQP UHWS WARE SCBY 6 Hrs + 2 Days 5 Days VAT VAT 1,495 + VAT VAT VAT VAT PAS 2030 Training and QMS Guide to Deemed Scores Cavity Wall Surveyor Domestic Energy Assessor (DEA) Green Deal Advisor (GDA) Non Domestic Energy Assessor (NDEA) L3 Non Domestic Energy Assessor (NDEA) L4 PAS GDSE CWS GDA Days 5 Days 6 Days 2 Days VAT VAT VAT VAT 1,150 + VAT 1,350 + VAT VAT 34 info@ppltraining.co.uk All Enquiries Call: Please Visit our Website for our Latest Renewable Energy and Water Training Course Dates 35

19 RENEWABLE ENERGY, WATER & GAS Training Courses Available Nationwide York Training Centre PPL House, Opus Avenue, York Business Park, Nether Poppleton, York, YO26 6BL Slough Training Centre 468 Malton Avenue, Slough Trading Estate, Slough, SL1 4QU Falkirk Training Venue Camelon Road, Falkirk, Stirlingshire, FK1 5RY Bespoke On-site Training We have the capability to deliver select courses on your premises for your convenience. Please contact us for details. International Training We are experienced in delivering a wide variety of courses across the world. Please contact us for details. Delivering Excellence as Standard We have received Gold Trusted Service Status based on 250+ verified independent reviews. View our feedback online. Contact Us Enquiries, please call: or info@ppltraining.co.uk. Scan the Qr Code to visit our website. PPL Training Ltd, Opus Avenue, York Business Park, York, YO26 6BL. E&OE - Printed Spring 2018