MATERIAL SAFETY DATA SHEET

Size: px
Start display at page:

Download "MATERIAL SAFETY DATA SHEET"

Transcription

1 MATERIAL SAFETY DATA SHEET 1. PRODUCT AND COMPANY IDENTIFICATION Product Name Concrobium Mold Stain Remover (Part 2) Material Number Chemical nature Solvent. Formula Not applicable. Synonyms Not applicable. Recommended Use Commercial and Industrial Company/undertaking identification: Siamons International Inc. 48 Galaxy Blvd., Unit 413 Toronto, Ontario M9W 6C8 Address Telephone: (866) HAZARDS IDENTIFICATION Potential Health Effects: No significant hazard. Environmental Hazard See Section 12 for additional Ecological Information. 3. COMPOSITION/INFORMATION ON INGREDIENTS Description Solvent Chemical Name CAS-No % OSHA ACGIH Propylene Glycol Diacetate >99% Not Listed Not Listed 4. FIRST AID MEASURES Eye Contact Skin Contact Inhalation Ingestion Flush eyes with water at least 10 minutes. Get medical attention if eye irritation develops or persists. Wash affected areas with soap and large amounts of water. If irritation develops and persists, get medical attention. May be slight irritation. Drowsiness may occur. Remove person to fresh air. If signs/symptoms continue, get medical attention. Rinse mouth with water. DO NOT induce vomiting. Get medical attention immediately if symptoms occur. Issuing Date January 5, 2012 ANSI US Format Page 1 / 5

2 5. FIRE-FIGHTING MEASURES Flammable Properties Suitable Extinguishing Media Protective Equipment and Precautions for Firefighters Not flammable. Standard procedure for chemical fires. Foam. Water. As in any fire, wear self-contained breathing apparatus and full protective gear. 6. ACCIDENTAL RELEASE MEASURES Personal Precautions Methods for Containment Methods for Cleaning Up Use only with adequate ventilation/personal protection. Avoid breathing spray mist. Avoid formation of aerosols. For personal protection see section 8. Prevent further leakage or spillage if safe to do so. Contain and remove spilled product by mechanical means or with a vacuum cleaner equipped with a high efficiency filter. Avoid formation of aerosol. 7. HANDLING AND STORAGE Handling Storage Avoid breathing spray mist. Use appropriate personal protection (see Section 8). Avoid contact with the product. Avoid the formation of aerosols. Ventilate areas. Keep in a dry, cool and well-ventilated place. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure Guidelines Contains no substances with occupational exposure limit values. Occupational Exposure Controls Engineering Measures Hygiene Measures Ventilation systems. Handle in accordance with good industrial hygiene and safety practice. Personal Protective Equipment Eye/Face Protection Skin and Body Protection Respiratory Protection Safety glasses with side-shields. Impervious gloves. OV/AG/P100 respirator recommended Page 2 / 5

3 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Colorless liquid. Odor Pleasant Physical State Liquid. ph No information available Flash Point Approx. 87 C. Method Not applicable. Autoignition Temperature 431 C. Decomposition Temperature Not determined Boiling Point/Range 190 C. Melting Point/Range Not determined Freezing Point Not determined Flammability Limits in Air Not applicable. Explosion Limits Not determined Specific Gravity Not determined Water solubility Soluble Evaporation Rate Not determined Vapor Pressure Not determined Vapor Density Not determined Density g/cm3 Molecular Weight Not determined 10. STABILITY AND REACTIVITY Stability Incompatible Products Conditions to Avoid Stable under recommended storage conditions. None known. None known. Hazardous Decomposition Products When mixed with Part 1 generates peracetic acid. Hazardous Polymerization Hazardous polymerization does not occur. Page 3 / 5

4 11. TOXICOLOGICAL INFORMATION Product Information Acute Toxicity Oral Dermal Inhalation Irritation Eye irritation Skin irritation Respiratory irritation Systemic toxicity Mutagenic effects Reproductive effects Carcinogenicity Oral Rat LD50 3.0g/kg. No data available. No data available. May cause slight irritation. May cause slight irritation on prolonged contact. No data available There is no data available for this product There is no data available for this product This product does not contain any known or suspected reproductive hazards. The list below indicates any ingredient listed as a carcinogen: 12. ECOLOGICAL INFORMATION Ecotoxicity effects Mobility Persistence and Degradability Bioaccumulation/Accumulation Contains no substances known to be hazardous to the environment or that are not degradable in wastewater treatment plants. Soluble. Biodegradable. Bioaccumulation is unlikely. 13. DISPOSAL CONSIDERATIONS Waste Disposal Methods Packaging In accordance with local and national regulations. If empty container retains product residues, all label precautions must be observed. Store away from ignition sources. Transport with all closures in place. Return for reuse or dispose according to national or local regulations. 14. TRANSPORT INFORMATION Not classified as hazardous for transport purposes Page 4 / 5

5 15. REGULATORY INFORMATION HAZARD RATING SYSTEMS: HMIS (SCALE 0-4, WHERE 4=SEVERE HAZARD): Health: 2 Flammability: 2 Reactivity: 2 U.S. Federal Regulations Chemical Name SARA Threshold Values % CERCLA/SARA - Section 302 Extremely Haz Propylene Glycol Diacetate Not listed Not listed U.S. State Regulations California Proposition 65 This product does not contain any Proposition 65 chemicals. 16. OTHER INFORMATION Prepared By Siamons International Inc. Issuing Date March 21, 2012 Revision Date March 21, 2012 Changes since last date of revision: Disclaimer The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. END OF SDS Page 5 / 5