The channel s length, depth and outlet position are just a few of the parameters which can be specified.

Transcription

1 Introduction Introduction CO Modular Channel product range The CO Modular Channel portfolio includes channels for all common applications and all common floor types (concrete, tile or resin). Selecting a channel from the range is easy. The unique variability of the whole product range makes it easy to choose the right channel according to a specific customer s needs. The channel s length, depth and outlet position are just a few of the parameters which can be specified. CO Modular Channel ordering CO Slot Drain The dimensions of the CO Modular Channel can be easily specified in respect of project requirements. CO Modular Channel customization In addition, all CO Modular Channels can be designed to a special length. To request a custom CO Modular Channel, please contact our Sales/ Technical department. 92

2 Introduction CO Modular Channel system overview CO Modular 125 CO Modular 200 CO Slot Drain ll CO Modular Channel systems can be used in conjunction with CO Floor Drain bodies and accessories 93

3 Introduction CO Modular system overview Outlet unit (pg 98) 5 Grate (pg 101) 2 Neutral invert and sloping sections (pg 95, 96) 6 Floor Drain body (pg 15) 3 Corner unit (pg 96) 7 Silt basket (pg 104) 4 ranch unit (pg 97) 94

4 PunchM. chapter 2 : // PunchM. section 2 : PunchM. chapter 3 : // PunchM. section 3 : PunchM. chapter 4 : // PunchM. section 4 : CO Modular Channel CO Modular standard products CO Modular standard products Product information The modular concept allows for the specification of standard channel units to suit a variety of custom layouts. The Vee-bottomed (V) profiled channel offers enhanced flow efficiency at low flow rates and improved self cleaning performance. Fully tested and classified to EN 1433 vailable in ISI 304 (304) or ISI 316 (316) grades of stainless steel Fully pickle passivated finish Easy and secure adjustable connection with floor drain Cut on demand products available to minimize work on site Wide range of grates available certified to EN standard grates up to C 250; custom grates up to E 600 Special duty grates available on request [13] 6.02 [153] 4.92 [125] 3.82 [97] 0.82 [21] 0.06 [1.5] Neutral invert channel 4.92 [125] Dimensions Part number ISI 304 ISI [50] [65] [80] [95] [110] [125] [50] [65] [1000] 3.15 [80] [95] [110] [125] [50] [65] [2000] 3.15 [80] [95] [110] [125] [50] [65] [3000] 3.15 [80] [95] [110] [125] Note: Items are equipped with seal and connecting hardware on one end. Grates for CO Modular 125 Page

5 CO Modular standard products Sloping invert channels [125] [1000] [2000] [3000] Dimensions Note: Items are equipped with seal and connecting hardware on deeper end. Part number 1 2 ISI 304 ISI [50] 2.56 [65] [65] 3.15 [80] [50] 2.56 [65] [65] 3.15 [80] [80] 3.74 [95] [95] 4.33 [110] [50] 2.56 [65] [65] 3.15 [80] [80] 3.74 [95] [95] 4.33 [110] [110] 4.92 [125] [50] 2.56 [65] [65] 3.15 [80] [80] 3.74 [95] [95] 4.33 [110] [110] 4.92 [125] Corner unit 4.92 [125] 4.92 [125] [515] Dimensions Note: Items are equipped with seal and connecting hardware on one end. ISI 304 Part number ISI [50] [65] [80] [95] [110] [125] Grates for CO Modular 125 Page 101

6 CO Modular standard products ranch unit [125] [125] 1 Dimensions [515] Note: Items are equipped with seal and connecting hardware on one end. ISI 304 Part number ISI [50] [65] [80] [95] [110] [125] Grates for CO Modular 125 Page

7 CO Modular standard products End outlet 4.92 [125] ØD Dimensions Floor drain Outlet diameter Part number 1.97 [50] ØD ISI 304 ISI [65] [80] CO 8 ygienic [125] 3.74 [95] Floor Drain [110] [125] [50] [65] [80] CO 10 ygienic [142] 3.74 [95] Floor Drain [110] [125] [80] Note: Items are without seal and connecting hardware [95] Sch [110] [125] Grates for CO Modular 125 Page 101 ccessories for CO Modular 125 Page 104

8 CO Modular standard products Center outlet 4.92 [125] ØD Dimensions Floor drain Outlet diameter Part number 1.97 [50] ØD ISI 304 ISI [65] [80] CO 8 ygienic [125] 3.74 [95] Floor Drain [110] [125] [50] [65] [80] CO 10 ygienic [142] 3.74 [95] Floor Drain [110] [125] [80] Note: Items are without seal and connecting hardware [95] Sch [110] [125] Grates for CO Modular 125 Page 101 ccessories for CO Modular 125 Page

9 CO Modular standard products End plate Note: Items are equipped with seal and connecting hardware. Dimensions ISI 304 Part number ISI [50] [65] [80] [95] [110] [125] End plate with 2 [50 mm] outlet Ø1.97 [50] Dimensions Part number ISI 304 ISI [95] [110] [125] Note: Items are equipped with seal and connecting hardware. Rubber gasket Dimensions Material Part number 1.97 [50] Note: Items include seal and connecting hardware [65] NR 3.15 [80] acrylonitrile 3.74 [95] butadiene rubber 4.33 [110] [125]

10 PunchM. chapter 2 : // PunchM. section 2 : PunchM. chapter 3 : // PunchM. section 3 : PunchM. chapter 4 : // PunchM. section 4 : CO Modular Channel Grates for CO Modular 125 Grates for CO Modular 125 Product information Fully tested and classified to EN 1433 vailable in ISI 304 or ISI 316 grades of stainless steel Special length of [375 mm] for branches and corner units oad classes 15, 125 and C 250 Custom grate options available up to load class E 600 CO Mesh Grate 4.84 [123] ength [375] oad class Slip resistant Slot size Material Part number ISI ISI [23] 0.08 [2] ISI ISI [1000] [375] [1000] C 250 Yes 0.91 [23] 0.12 [3] 0.87 [22] 0.12 [3] ISI ISI ISI ISI ISI ISI ISI ISI CO eelsafe Grate 4.84 [123] ength [375] [1000] oad class Slip resistant Slot size 125 No 1.85 [47] 0.12 [3] Material Part number ISI ISI ISI ISI ISI ISI

11 Grates for CO Modular 125 CO Multi-slot 5 Grate 4.84 [123] ength [375] CO Quadrato Grate oad class Slip resistant Slot size [1000] Yes 0.20 [5] [6.5] 0.26 [6.5] [1000] 0.20 [5] 0.24 [6] Material Part number ISI ISI ISI ISI ISI ISI ISI ISI ISI ISI [123] ength [375] [1000] oad class Slip resistant Slot size 15 No 0.24 [6] Material Part number ISI ISI ISI ISI ISI ISI

12 Grates for CO Modular 125 CO Plastic Grate ength oad class Slip resistant Slot size Material Part number No 0.31 [8] [1000] CO ygienic adder Grate ength 4.84 [123] oad class Slip resistant Slot size Material Part number [375] ISI ISI C 250 Yes 0.79 [20] 0.2 [5] ISI ISI [1000] ISI ISI

13 ccessories for CO Modular 125 ccessories for CO Modular 125 Description Used with Material Part number 1.97 [50] Ø5.35 [136] CO Modular 125 with 125mm outlet ISI ISI Silt basket Stainless steel 1.97 [50] Ø6.06 [154] CO Modular 125 with 142mm outlet ISI ISI

14 CO Modular 200 CO Modular standard products Product information The modular concept allows for the specification of standard channel units to suit a variety of custom layouts. The Vee-bottomed (V) profiled channel offers enhanced flow efficiency at low flow rates and improved self cleaning performance. Fully tested and classified to EN 1433 vailable in ISI 304 or ISI 316 grades of stainless steel Fully pickle passivated finish Easy and secure adjustable connection with floor drain Cut on demand products available to minimize work on site Wide range of grates for load class up to C 250 (EN 1433) Custom grate options available up to load class E [21.5] 6.77 [172] 9.06 [230] 7.87 [200] 1.22 [31] 0.06 [1.5] Neutral invert channel 7.87 [200] [1000] [2000] [3000] Dimensions ISI 304 Part number ISI [60] [70] [80] [100] [60] [70] [80] [100] [60] [70] [80] [100] [60] [70] [80] [100] Note: Items are equipped with seal and connecting hardware for one end. Grates for CO Modular 200 Page

15 CO Modular standard products Sloping invert channels [200] Dimensions 1 2 ISI 304 Part number ISI [55] 2.36 [60] [1000] [2000] [3000] Note: Items are equipped with seal and connecting hardware on deeper end [60] 2.76 [70] [70] 3.15 [80] [80] 3.54 [90] [90] 3.94 [100] [100] 4.33 [110] [60] 2.76 [70] [70] 3.15 [80] [80] 3.54 [90] [90] 3.94 [100] [100] 4.33 [110] [110] 4.72 [120] [60] 3.15 [80] [80] 3.94 [100] [100] 4.72 [120] [120] 5.51 [140] Grates for CO Modular 200 Page 112

16 CO Modular standard products Corner unit 7.87 [200] [515] Dimensions Note: Items are equipped with seal and connecting hardware on one end. ranch unit 1 Part number ISI 304 ISI [60] [80] [100] [200] [200] 1 Dimensions [515] Part number ISI 304 ISI [60] [80] [100] Note: Items are equipped with seal and connecting hardware on one end. Grates for CO Modular 200 Page

17 CO Modular standard products End outlet ØD 7.87 [200] Dimensions Floor drain Outlet diameter Part number 2.36 [60] ØD ISI 304 ISI [70] [80] [90] CO 10 ygienic [142] 3.94 [100] Floor Drain [110] [120] [140] [80] Note: Items are without seal and connecting hardware [90] [100] CO 12 ygienic Sch [110] Floor Drain [120] [140] End outlet ØD 7.87 [200] [300] [785] Dimensions Floor drain Outlet diameter Part number 2.36 [60] Note: Items are without seal and connecting hardware. ØD ISI 304 ISI [70] [80] [90] CO 12 ygienic [200] 3.94 [100] Floor Drain [110] [120] [140] Grates for CO Modular 200 Page 112

18 CO Modular standard products Center outlet ØD 7.87 [200] Dimensions Floor drain Outlet diameter Part number ØD ISI 304 ISI [60] [70] [80] [90] CO 10 ygienic [142] 3.94 [100] Floor Drain [110] [120] [140] [80] Note: Items are without seal and connecting hardware [90] [100] CO 12 ygienic Sch [110] Floor Drain [120] [140] Grates for CO Modular 200 Page 112 ccessories for CO Modular 200 Page

19 CO Modular standard products Center outlet ØD 7.87 [200] [300] 50 [1270] Dimensions Floor Drain Outlet diameter Part number ØD ISI 304 ISI [60] Note: Items are without seal and connecting hardware. End plate [70] [80] [90] CO 12 ygienic [200] 3.94 [100] Floor Drain [110] [120] [140] Note: Items are equipped with seal and connecting hardware. Dimensions ISI 304 Part number ISI [55] [60] [70] [80] [90] [100] [110] [120] [140] Grates for CO Modular 200 Page 112 ccessories for CO Modular 200 Page 114

20 CO Modular standard products End plate with 2 [50 mm] outlet Ø1.97 [50] Dimensions Part number ISI 304 ISI [100] [110] [120] [140] Note: Items are equipped with seal and connecting hardware. Rubber gasket Dimensions Material Part number 2.36 [60] Note: Items include seal and connecting hardware [70] [80] NR [90] acrylonitrile butadiene [100] rubber [110] [120] [140]

21 PunchM. chapter 2 : // PunchM. section 2 : PunchM. chapter 3 : // PunchM. section 3 : PunchM. chapter 4 : // PunchM. section 4 : CO Modular Channel Grates for CO Modular 200 Grates for CO Modular 200 Product information Fully tested and classified to EN 1433 vailable in ISI 304 or ISI 316 grades of stainless steel Special length [300 mm] for branches and corner units Slip resistant grates available for added user safety oad class 15, 125 and C 250 options available Full pickle passivated CO Mesh Grate 7.79 [198] ength [300] oad class Slip resistant Slot size 15 Yes 0.91 [23] 0.08 [2] Material Part number ISI ISI ISI ISI [1000] ISI ISI CO Multi-slot 5 Grate 7.79 [198] ength [300] oad class Slip resistant Slot size 15 No 0.37 [9.5] 0.30 [7.5] 0.26 [6.5] [1000] 0.20 [5] 0.24 [6] 0.26 [6.5] 125 Yes [1000] 0.20 [5] Material Part number ISI ISI ISI ISI ISI ISI ISI ISI ISI ISI

22 Grates for CO Modular 200 CO ygienic adder Grate 7.79 [198] ength oad class Slip resistant Slot size Material Part number [300] [1000] C 250 Yes 0.79 [20] 0.78 [19.7] 0.20 [5] ISI ISI ISI ISI ISI ISI

23 ccessories for CO Modular 200 ccessories for CO Modular 200 Description Used with Material Part number ISI [26] Ø6.14 [156] CO Modular 200 with 5.59 [142] outlet ISI [50] Ø6.06 [154] Silt basket Stainless steel CO Modular 200 with 5.59 [142] outlet (deeper basket) ISI ISI [50] Ø8.54 [217] CO Modular 200 with 7.87 [200] outlet ISI ISI

24 Semi-standard products CO Modular Channel - Semi-standard products Product information Semi-standard products provide an easy and fast way to get a slot or trench drain of a special length to complete a linear drainage project from standard products. Simply specify the length you need. ow to specify semi-standard products: Specify the part number from which the semi-standard product will be produced. ow it works: The semi-standard product is produced from a standard product (neutral invert and sloping invert channels only) which is shortened according to the customer s need. The shortened product is then equipped with flange and sealing materials to fit the channel in the drainage project. grate of the same length is also produced. Required length of the channel Standard neutral invert or sloping invert channel Specify the required length of the product (start at the deeper end of channel if a channel with slope is used). Standard length of the channel Required length of the channel 115