: Alizarin Red S, 1% Aqueous

Transcription

1 Date of issue: 11/01/2013 Revision date: 09/27/2016 Supersedes: 11/01/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Alizarin Red S, 1% Aqueous : LC Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture 1.3. Details of the supplier of the safety data sheet : For laboratory and manufacturing use only LabChem Inc Jackson's Pointe Commerce Park Building 1000, 1010 Jackson's Pointe Court Zelienople, PA USA T F info@labchem.com Emergency telephone number Emergency number : CHEMTREC: or SECTION 2: Hazard(s) identification 2.1. Classification of the substance or mixture GHS-US classification Not classified 2.2. Label elements Not classified as a hazardous chemical Other hazards Other hazards not contributing to the classification 2.4. Unknown acute toxicity (GHS US) SECTION 3: Composition/Information on ingredients 3.1. Substance 3.2. Mixture Name Product identifier % GHS-US classification Water (CAS No) Not classified Alizarin Red S (CAS No) Skin Irrit. 2, H315 Eye Irrit. 2A, H319 STOT SE 3, H335 Full text of hazard classes and H-statements : see section 16 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). : Allow victim to breathe fresh air. Allow the victim to rest. : Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. : Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persist. : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention Most important symptoms and effects, both acute and delayed Symptoms/injuries : Not expected to present a significant hazard under anticipated conditions of normal use. Symptoms/injuries after skin contact : May stain the skin. 09/27/2016 EN (English US) Page 1

2 4.3. Indication of any immediate medical attention and special treatment needed SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media Unsuitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand. : Do not use a heavy water stream Special hazards arising from the substance or mixture 5.3. Advice for firefighters Firefighting instructions Protection during firefighting : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. : Do not enter fire area without proper protective equipment, including respiratory protection. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures For non-emergency personnel Protective equipment Emergency procedures For emergency responders Protective equipment Emergency procedures : Safety glasses. Gloves. : Evacuate unnecessary personnel. : Equip cleanup crew with proper protection. : Ventilate area Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters Methods and material for containment and cleaning up Methods for cleaning up 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapor Conditions for safe storage, including any incompatibilities Storage conditions : Keep container closed when not in use. Incompatible products : Strong bases. Strong acids. Incompatible materials : Sources of ignition. Direct sunlight. SECTION 8: Exposure controls/personal protection 8.1. Control parameters 09/27/2016 EN (English US) 2/6

3 8.2. Exposure controls Personal protective equipment : Safety glasses. Gloves. Hand protection Eye protection Respiratory protection Other information : Wear protective gloves. : Chemical goggles or safety glasses. : Wear appropriate mask. : Do not eat, drink or smoke during use. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Color : red Odor Odor threshold ph Melting point Freezing point Boiling point Flash point Relative evaporation rate (butyl acetate=1) Flammability (solid, gas) : Non flammable. Vapor pressure Relative vapor density at 20 C Relative density Specific gravity / density : 1 g/ml Solubility : Soluble in water. Log Pow Auto-ignition temperature Decomposition temperature Viscosity, kinematic Viscosity, dynamic Explosion limits Explosive properties :. Oxidizing properties 9.2. Other information SECTION 10: Stability and reactivity Reactivity Chemical stability Stable under normal conditions Possibility of hazardous reactions Conditions to avoid Direct sunlight. Extremely high or low temperatures Incompatible materials Strong acids. Strong bases. 09/27/2016 EN (English US) 3/6

4 10.6. Hazardous decomposition products Carbon monoxide. Carbon dioxide. Nitrogen oxides. SECTION 11: Toxicological information Information on toxicological effects Likely routes of exposure Acute toxicity LD50 oral rat ATE US (oral) Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity (single exposure) Specific target organ toxicity (repeated exposure) Aspiration hazard Potential Adverse human health effects and symptoms Symptoms/injuries after skin contact : Skin and eye contact mg/kg mg/kg body weight : Based on available data, the classification criteria are not met. : May stain the skin. SECTION 12: Ecological information Toxicity LC50 fish mg/l 48h Persistence and degradability Alizarin Red S, 1% Aqueous Persistence and degradability Persistence and degradability Persistence and degradability Bioaccumulative potential Alizarin Red S, 1% Aqueous Bioaccumulative potential Bioaccumulative potential Bioaccumulative potential Mobility in soil Other adverse effects Effect on the global warming : No known effects from this product. 09/27/2016 EN (English US) 4/6

5 GWPmix comment Other information : No known effects from this product. : Avoid release to the environment. SECTION 13: Disposal considerations Waste treatment methods Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Ecology - waste materials : Avoid release to the environment. SECTION 14: Transport information Department of Transportation (DOT) In accordance with DOT Not regulated SECTION 15: Regulatory information US Federal regulations Listed on the United States TSCA (Toxic Substances Control Act) inventory SARA Section 311/312 Hazard Classes Immediate (acute) health hazard Listed on the United States TSCA (Toxic Substances Control Act) inventory International regulations CANADA Alizarin Red S, 1% Aqueous WHMIS Classification Uncontrolled product according to WHMIS classification criteria Listed on the Canadian DSL (Domestic Substances List) WHMIS Classification Class D Division 2 Subdivision B - Toxic material causing other toxic effects WHMIS Classification Uncontrolled product according to WHMIS classification criteria EU-Regulations National regulations Not listed on the Canadian IDL (Ingredient Disclosure List) US State regulations SECTION 16: Other information Revision date : 09/27/2016 Other information Full text of H-phrases: see section 16: H315 Causes skin irritation H319 Causes serious eye irritation H335 May cause respiratory irritation 09/27/2016 EN (English US) 5/6

6 NFPA health hazard NFPA fire hazard NFPA reactivity : 0 - Exposure under fire conditions would offer no hazard beyond that of ordinary combustible materials. : 0 - Materials that will not burn. : 0 - Normally stable, even under fire exposure conditions, and are not reactive with water. HMIS III Rating Health Flammability Physical Personal protection : 0 Minimal Hazard - No significant risk to health : 0 Minimal Hazard - Materials that will not burn : 0 Minimal Hazard - Materials that are normally stable, even under fire conditions, and will NOT react with water, polymerize, decompose, condense, or self-react. Non-Explosives. : B B - Safety glasses, Gloves SDS US LabChem Information in this SDS is from available published sources and is believed to be accurate. No warranty, express or implied, is made and LabChem Inc assumes no liability resulting from the use of this SDS. The user must determine suitability of this information for his application. 09/27/2016 EN (English US) 6/6