Laboratory Central Institute Of Plastics Engineering & Technology (Cipet), Plot No. 630, Phase IV, GIDC, Vatva, Ahmedabad, Gujarat

Transcription

1 Last Amended on - Page 1 of 6 I. PLASTICS AND POLYMERS A. Plastic Pipes and Accessories 1. UPVC Pipe For Potable Water Supplies UPVC Screen And Casing Pipes For Bore/Tube Well, UPVC Pipes For Soil And Waste Discharge System Inside Buildings Including Ventilation And Rain Water System, Injection Moulded PVC Fittings With Solvent Cement Joints For Water Supplies, Pipes For Potable Water Supplied Sewerage & Industrial Effluents Reversion IS (Part 5): 2004 Upto 200 % 2. Pipes For Potable Water Structural Wall Plastics Piping Systems For Non- Pressure Drainage & Sewerage, Supplies Polyethylene Pipes For The Supply Of Gaseous Fuels, Emitters(Dripper) Emitting Pipe, PPR Pipes For Hot And Cold Water, Chlorinated Polyvinyl Chloride(Cpvc) Pipes For Potable Hot & Cold Water Distribution Supplies Dimension IS 4984: 95, IS (Part 1 to 4), IS 14735: 99, IS 14885: 2001, IS 2508: 84, IS 7834 (Part 1, 3,6,8): 87, IS 12701: 96, IS 12786: 89, IS 13488: 2008, IS 13592: 2013, IS (Part 1): 1999, IS 14333: IS 15801: 2008, IS 15351: 2015, IS 15410: 2003, 0.02 mm through 600 mm

2 Last Amended on - Page 2 of 6 For Moulding And Extrusion, Irrigation Equipments Polyethylene Pipes For Irrigation Laterals, Irrigation Equipment Polyethylene Pipes For Irrigation Laterals, Irrigation Equipment Sprinkler Pipes Polyethylene, Irrigation Equipment Sprinkler Pipes-Quick Coupled Polyethylene Visual Appearance /Workmanship/Finish/ Shape/Colour IS 15328: 2003, IS 15609: 2005, IS 15907: 2010, IS 16028: 2015, IS 9755: 2013, IS 7903: IS 11652: 2000, IS 15778: 2007, IS 4985: 2000, IS (Part 1 & 2): 2013 IS 4985: 2000, IS 4984: 1995, IS 14885: IS 2508: 1984, IS 7834 (Part 1,3,6,8): 1987 IS 12701: 1996, IS 12786: 1989, IS 12818: 2010, IS 13487: 1992, IS 13488: 2008, IS 13592: 1992, IS (Part 1): 1999, IS 14333: 1996 IS 15801: 2008, IS 15328: 2003, IS 15778: 2007 IS (Part 1 & 2): 2013 Qualitative Opacity IS 1225 (Part 3): 2004 IS 7834 (Part 1,3,8): % to 100 %

3 Last Amended on - Page 3 of 6 Pipes For Potable Water Structural Wall Plastics Piping Systems For Non- Pressure Drainage & Sewerage, Supplies Polyethylene Pipes For The Supply Of Gaseous Fuels, Emitters(Dripper) Emitting Pipe, PPR Pipes For Hot And Cold Water, Chlorinated Polyvinyl Chloride(Cpvc) Pipes For Potable Hot & Cold Water Distribution Supplies, For Moulding And Extrusion, Irrigation Equipments Polyethylene Pipes For Irrigation Laterals, Irrigation Equipment Polyethylene Pipes For Irrigation Laterals, Irrigation Equipment Sprinkler Pipes Polyethylene, Irrigation Equipment Sprinkler Pipes-Quick Coupled Polyethylene Hydraulic Characteristics (Acceptance & Type) IS (Part 8): 2004 IS 14885: 2001, IS 4984: 1995 IS 7834 (Part 1,3,6,8): 1987 IS 12786: 1989 IS 13488: 2008, IS (Part 1): 1999 IS 14333: 1996 Upto 100 kg/cm² Upto 400 mm dia

4 Last Amended on - Page 4 of 6 II. TEXTILE MATERIALS A. Fabrics (Woven And Non Woven) 1. 50kg/25kg Sugar, High Density Polyethylene (HDPE) Woven Fabric (Tarpaulin) Woven Sacks For Packing Cement-High Density Polyethylene(HDPE) /PP Woven Sacks For Packing Fertilizer Resistance To External Blow at 0 C Density/Specific Gravity Tensile Strength & Elongation IS 4985: to 100 % IS (Part 3/Sec I): 1996 & ASTM D 792: 2008, IS 7328: 1992, IS (Part 1 & 2): 2013 IS 8543 (Part 4): 1984 ASTM D 638: g/cc to 3.0 g/cc 0 MPa & to 400 MPa & 0 % to 1200 % Effect Of Sunlight IS 13592: 2013 Qualitative Water Tightness Of Joint Fusion Compatibility Test Hardness Shore A & D IS 13592: 2013 IS (Part 1): 1999 IS 3400 (Part 2): 2003 & ASTM D 2240: 1997 IS 12818: 2010, IS (Part 2): 2008, IS (Part 5/Sec 11): 1992 Qualitative Qualitative Upto 100 Leakage Test IS (Part 2): 2008 Qualitative Hydraulic Proof Test IS (Part 2): 2008 Qualitative Weldability Test IS (Part 2): 2008 Qualitative Net/Gross Capacity IS 12701: 1996 Upto 1000 l

5 Last Amended on - Page 5 of 6 50kg/25kg Sugar, High Density Polyethylene (HDPE) Woven Fabric (Tarpaulin) Woven Sacks For Packing Cement-High Density Polyethylene(HDPE) /PP Woven Sacks For Packing Fertilizer Resistance To Deformation IS 12701: to 5 % Top Load Deformation IS 12701: 1996 Qualitative Flexural Modulus/Strength Slip/COF IS (Part 5/Sec VII): 1996 & ASTM D 790: 2010 IS 2508: 1984 & ASTM D 1894: MPa to 2000 MPa 0.05 to 5.0 Modulus Of Rupture IS 2380: MPa to 4000 MPa Flow Path In Emitter IS 13487: mm to 8 mm Emitter Pull-Out IS 13487: 1992 Qualitative Uniformity Of IS 13487: 1992 Upto 14 LPH Emission Rate Spacing Of Emitting IS 13488: 2008 Upto 600 mm Unit Pull-Out IS 13488: 2008 Qualitative Compressive Strength Of Rigid Plastics ASTM D 695: MPa to 5000 MPa 2. High Density Polyethylene(HDPE) Woven Fabric (Tarpaulin) Woven Sacks For Packing Cement-High Density Polyethylene(HDPE) Polypropylene(PP), High Density Polyethylene (HDPE) Polypropylene Izod Impact Strength ASTM D 256: 2010 IS (Part 5/Sec IV): 1996 Charpy Impact Strength ASTM D 6110: 2008 IS (Part 5/Sec V): J/m to 2000 J/m 1 kj/m² to 200 kj/m² Tongue Tear IS 14293: N to 1000 N

6 Last Amended on - Page 6 of 6 (PP) Woven Sacks For Packaging Of 10kg, 15kg, 25, kg & 30 Kg Food Grains, High Density Polyethylene (HDPE) Woven Beds For Vermiculture Textile Laminated High Density Polypropylene (HDPE) Fabric For Canal Lining, Packaging & Containers Polyethylene Flexible Pouch For The Packing Natural Mineral Water And Packaged Drinking Water, Container For Packaging Of Natural Mineral Water And Packaged Drinking Water Puncture Test IS 1535: 2015 IS 15907: 2010 IS 7903: 2011 Breaking Strength Before & After UV Exposure IS 1969: X-X-X-X-X-X-X-X-X-X-X-X-X-X- 1 N to 1000 N 1 N to 2000 N