THE NEXLENE TM ADVANCED TECHNOLOGY PLATFORM

Transcription

1 THE NEXLENE TM ADVANCED TECHNOLOGY PLATFORM International Polyolefins Conferences 2017

2 Contents 1) Market opportunity for mpe, including POP and POE 2) Introduction to SABIC SK Nexlene Company 3) Introduction to Nexlene technology and products 4) Nexlene Future

3 Contents 1) Market opportunity for mpe, including POP and POE 2) Introduction to SABIC SK Nexlene Company 3) Introduction to Nexlene technology and products 4) Nexlene Future

4 Global mpe Market Polyolefin market analysis* Market attractiveness factors Demand Demand growth Number of suppliers Price Opportunity index factors Performance benefits Intra-material competition Opportunity in specialty markets Note: Chart represents relative position of products. Bubble size represents relative market size of each product in Source: Chemical Market Resources, Inc. Houston, TX PE Type Density (g/cc)* Melt Index (MI, g/10 min) mlldpe mpoe mpop mmdpe *SSNC definition

5 POE (Polyolefin Elastomer) Characteristics of POE POE market by application Easy processing with high flow Others 4.4% Polymer Modification 74.1% Products are lighter than other TPE products Compatible to PP for TPO products Medical 1.0% Footwear 9.5% Industrial & Construction 1.1% Wire & Foam Cable 3.6% 6.3% Demand for POE in 2016 = 623 KT SSNC expects 6-8% annual POE market growth over the next 5 years Source: Chemical Market Resources, Inc. Houston, TX

6 POP (Polyolefin Plastomer) Characteristics of POP POP market by application Excellent sealability (Low seal initiation temperature, high hot tack) Enhanced toughness Clarity Extrusion Coating 2.7% Others 1.5% Rotomolding 1.8% Pipe 0.3% Wire & Cable 0.8% Blow M olding 0.8% Injection Molding 2.0% Film 90.3% Hygienic property Demand for POP in 2016 = 596 KT Source: Chemical Market Resources, Inc. Houston, TX

7 Global POP market in Packaging Global flexible packaging market is forecast to grow at 3-4%, closely matching economic growth over the next few years While mpop will grow at a much faster rate Flexible packaging market (MMTA) Polyolefin Plastomers: density Extrusion coating and in multilayer packaging film applications Differentiated based on SIT, seal strength, cling, and clarity. Global POP market is estimated to grow from about $4B USD currently to almost $6B USD in little over five years. SSNC expects 6-8% annual POP growth

8 Contents 1) Market opportunity for mpe, including POP and POE 2) Introduction to SABIC SK Nexlene Company 3) Introduction to Nexlene technology and products 4) Nexlene Future

9 SABIC SK Nexlene Company (JV) Founded in 1976 and 40 years of growth 3 rd largest global chemical company 247 th largest company in Fortune Global 500 in 2016 HQ: Riyadh, KSA 87.5 billion USD total assets, 39.5 billion USD annual revenue in ,000 employees in 50 countries 3 rd largest polyethylene supplier in the world

10 SABIC SK Nexlene Company (JV) Founded in 1962 and 54 years of growth Affiliate of SK Holdings, 294 th largest business group in Fortune Global 500 in 2016 HQ: Seoul, Korea 1 st naphtha cracking centre in Korea, 860 KTA Biggest aromatics supplier in east Asian region, 3 million MT) 9.6 billion USD annual revenue in 2015 Polyolefin (PE, PP, EPDM) supplier

11 SABIC SK Nexlene Company (JV) Korea SSNC R&D Center 1 st Plant in Ulsan Singapore SSNC head office

12 SABIC SK Nexlene Company (JV) SKI Value for Nexlene technology Tech. Transfer SKGC 50% SSNC 50% (Singapore) SABIC KNC (1 st plant operation company) (2 nd plant operation company) (3 rd plant operation company) * Global expansion with multiple production sites

13 SSNC R&D Center Established Jul Vision: economically competitive, reliable, Nexlene process for the production of benchmark and new, high value, differentiated polyethylene plastics, plastomers and elastomers. SSNC CTO R&D center - Catalyst group - Process group - Product group SSNC KNC Production Role: Improvement and expansion of Nexlene technology, technical support to production and development of new grades Collaboration and cooporation with various research institutes

14 History of SSNC Technology development Developed catalyst and process - Pilot plant in 2006 Commercialization 230 KTA capacity. Ulsan Korea, from 2014 High premium polyolefin products with Nexlene technology Leading global supplier (SSNC) New expansion programs under consideration

15 Contents 1) Market opportunity for mpe, including POP and POE 2) Introduction to SABIC SK Nexlene Company 3) Introduction to Nexlene technology and products 4) Nexlene Future

16 What is Nexlene? Nexlene Next Generation Polyethylene High performance polyethylene produced by single-site catalyst(s) with octene-1 comonomer in bimodal solution process Ethylene, Comonomer, Solvent, Catalyst Ethylene, Comonomer, Solvent, Catalyst Log Mw 45

17 Nexlene Process Solution process Gas process Slurry process High value lower density product Long residence time Long residence time Bimodal reactor system Limited to higher density Limited to higher density Higher performance product with octene-1 comonomer Possible higher MW product Possible higher MW product Tie Molecule Probability at Optimum Density, % Solution process and higher alpha olefin co monomer delivers higher levels of tie chains Solution Gas / Slurry 20 C 8 C 7 C 6 C 5 C 4 Comonomer Type

18 Accelerating Nexlene catalyst evolution? High throughput screening Structure-property relationship SSNC R&D Scale-up and Commercialization - Continuous polymerization unit - Demo plant in Ulsan - Commercial plant in Ulsan SSNC Plant Third party collaboration Universities High throughput synthesis Synthesis and Optimization - - Synthesis of more than 100 kinds of metallocenes Know-how in Organic and Inorganic synthesis

19 Nexlene Products Product Range MI : 0.5 ~ 30 Density : ~ MI (g/10min) POE POP LLDPE MDPE Density (g/cc) mmd~mlld POE POP Pipe Food / non-food Packaging Outdoor Food Packaging Medical

20 Characteristics of Nexlene Film Grades Excellent impact resistance Lower shrinkage Thinner & lightweight Performance Excellent Performance Nexlene Processibility Compatible with most polyolefins Recyclable for environment Easy handling Nexlene Delivers Nexlene POE Low Migration Low Odor Hygiene Enhanced Toughness Low Heat-seal Temp. Downgauging Low Extractables Excellent bubble stability

21 Characteristics of Nexlene POP products Heat-seal Property Ref.A NX021 Seal pressure : 2kg Seal time : 1.0s NX021 Supreme 021 POP 8102 NX021S Supreme 021S POP 8102L NX081 Supreme 081 POP 8108

22 Characteristics of Nexlene mlld products Superior Low Seal Initiation Temp., Processability and Transparency Excellent Impact Resistance Rheological Property Heat-seal Property Seal pressure : 2kg Seal time : 1.0s 1 Low Shear Rate Neck-in Phenomena NX151 Smart 151 mlldpe 8115 NX154 Smart 154 mlldpe 8415

23 Characteristics of Nexlene POE products Excellent impact strength, flexural modulus, toughness and low temperature ductility Better physical properties than C4 POE NX871 Solumer 871 POE C1070 NX875 Solumer 875 POE C5070 NX8613 Solumer 8613 POE C13060

24 Nexlene mmdpe Nexlene process has high potential in various MDPE applications (~0.945 density) Impact/stiffness balance Creep property ESCR Processability Pipe PE-RT (underfloor heating) Pressurized pipe Film Heavy duty Shrink Roto molding Chemical tank Sports & Leisure

25 Contents 1) Market opportunity for mpe, including POP and POE 2) Introduction to SABIC SK Nexlene Company 3) Introduction to Nexlene technology and products 4) Nexlene Future

26 Megatrends Bio-Based PE Recycling Light weighting Smaller pack sizes Convenience Lifestyle

27 Capability of Nexlene Technology Expansion with Production capability Expansion of Metallocene Production capability

28 Expansion with production capability SSNC is planning to launch new differentiated polyolefin products to the marketplace by focusing on novel catalyst and process technology and delivering value to our customers globally. Advanced POE with bimodality Advanced POP with molecular design Elastomer with high flowability Better impact strength / modulus balance for automotive application Better heat-seal and hot tack performance for food packaging POE for hot melt adhesives Well balanced elasticity / heat resistance as an elastomer

29 Expansion of Metallocene Technology Platform SSNC is planning to launch new olefin based polymer (beyond PE) introducing new monomer/comonomer and molecular architecture control. Room temperature Tg plastomer Elastomer with enhanced UV stability Elastomer with improved heat resistance Replacement of f- PVC, healthcare, and soft touch applications Elastic material for outdoor applications New olefin based elastomer with better heat resistance and durability

30 Thank you for your attention! Q&A