Hepacide Quat II. virucidal disinfectant

Transcription

1 Hepacide Quat II virucidal disinfectant Hepacide quat II is a ready-to-use, quaternary-based virucidal disinfectant spray. It is non-viscous and clear in color, and fragrance-free. Users will appreciate the following product features, advantages and beneits: effective against hepatitis, saves time and labor, user friendly and surface safe. Providing Quality Maintenance and Chemical Specialty Solutions with Unparalleled Customer Service

2 Spartan Chemical Company, Inc Spartan Drive Maumee, OH EFFECTIVE IN THE MEDICAL FIELD: HCV (Hepatitis C Virus) and HBV (Hepatitis B virus) are serious concerns in the health care environment due to its highly infectious nature and the fact that chronic infection can lead to cirrhosis and cancer of the liver. Hard water performance is not a concern since Hepacide Quat II is ready-to-use and formulated with soft water. NO WASTE/SAVES TIME AND LABOR: Hepacide Quat II does not require mixing. Since it has been registered by the EPA in its ready-to-use form, it is not necessary to make up fresh solutions each week. Unlike some concentrated disinfectants that lose their potency once mixed and must be replaced on a regular, sometimes weekly basis, Hepacide Quat II is a stable formula for up to 12 months. KILLS GERMS: Effective against the following Bacteria: Staphylococcus aureus Pseudomonas aeruginosa Salmonella enterica Effective against the following Antibiotic-Resistant Bacteeria: Vancomycin resistant Enterococcus faecalis (VRE) Methicillin resistant Staphylococcus aureus (MRSA) Effective against the following Viruses: HIV-1 (AIDS Virus) Hepatitis C Virus (HCV) Hepatitis B Virus (HBV) Herpes simplex Type 2 Inluenza A2/Hong Kong viruses Pandemic 2009 H1N1 inluenza A virus AREAS FOR USE: Hospitals Laboratories Nursing Homes Urgent Care Facilities Doctor Ofices Dentist Ofices Veterinary Clinics Dialysis Centers Blood Banks Hotels/Motels Locker Rooms Health Spas Gyms Schools Day Care Centers Public Transportation Ambulance Services Law Enforcement (Cars and Facilities) Airplanes Highway Service Areas Gas Stations Restaurants Delicatessens Cafeterias Fast Food Chains Industry All Public Places APPLICATIONS: It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Disinfection and Cleaning: Remove gross ilth before disinfection. Apply Hepacide Quat II with a cloth, mop, sponge or coarse sprayer. Treated surfaces must remain wet for 10 minutes. Wipe off with a damp cloth or rinse with water. This product will not leave grit or soap scum. **KILLS HCV, HBV AND HIV ON PRE- CLEANED ENVIRONMENTAL SURFACES/ OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDS in health care settings or other settings in which there is an expected likelihood of soiling of inanimate surfaces/ objects with blood or body luids, and in which the surfaces/objects likely to be soiled with blood or body luids can be associated with the potential for transmission of Hepatitis C Virus (HCV), Hepatitis B Virus (HBV) and human immunodeiciency virus Type 1 (HIV-1) (associated with AIDS). Special Instructions for Cleaning and Decontamination Against HCV, HBV and HIV- 1 on Surfaces or Objects Soiled with Blood or Body Fluids: Personal Protection: Exposure to blood or body luids should be avoided by use of barrier protection such as latex or other impervious gloves. Face shields and impervious gowns should also be worn if splashing of blood or body luids may occur. Cleaning Procedure: Blood and other body luids must be thoroughly cleaned from surfaces and objects before application of the disinfectant. Contact Time: Leave surfaces wet for 10 minutes. Disposal of Infectious Material: Contaminated cleaning materials, blood and other body luids should be autoclaved and/or disposed of according to local regulations for infectious waste disposal. Be sure to read all Directions, Precautionary and First Aid Statements on product labels before use of this or any Spartan product. If questions remain, consult your employer or a physician. Material Safety Data Sheets for all Spartan products are available from your authorized Spartan distributor or by visiting SPECIFICATIONS: ph (Concentrate) Color Clear Scent Fragrance Free Stability: a. 24 C/75 F One year minimum b. Freeze/Thaw Three cycles Phosphate Free EPA Reg Distributed by: PACKAGING gallon tote gallon drum gallon drum 15-gallon drum 5-gallon pail 1-quart (12 per case) GUARANTEE: Spartan s modern manufacturing and laboratory control insure uniform quality. If dissatisied with performance of product, any unused portion may be returned for credit within one year of the date of manufacture. Use product as directed and read all precautionary statements. For institutional and industrial use only. SCC 2/13 L1251

3 Safety Data Sheet Spartan Chemical Company, Inc. Revision Date: 30-Jul PRODUCT AND COMPANY IDENTIFICATION Product Identifier Product Name: HEPACIDE QUAT II Product Number: 3251, 1251 Recommended Use: Disinfectant Uses Advised Against: For Industrial and Institutional Use Only Manufacturer/Supplier: Spartan Chemical Company, Inc Spartan Drive Maumee, Ohio USA (Business hours) 24 Hour Emergency Phone Numbers: Medical Emergency/Information: Transportation/Spill/Leak: CHEMTREC HAZARDS IDENTIFICATION GHS Classification t Classified t dangerous according to the Globally Harmonized System (GHS) GHS Label Elements Signal Word: Symbols: Hazard Statements: Precautionary Statements: Prevention: Response: -Specific Treatment: Storage: Disposal: Hazards t Otherwise Classified: Other Information: signal word hazard statements t Applicable See Safety Data Sheet Section 4: "FIRST AID MEASURES" for additional information. t Applicable t Applicable t Applicable May be harmful if swallowed. May cause eye irritation. May cause skin irritation. Inhalation of vapors or mist may cause respiratory irritation. Keep out of reach of children % of the mixture consists of ingredient(s) of unknown toxicity. 3. COMPOSITION/INFORMATION ON INGREDIENTS Chemical Name CAS Weight-% water dialkyl dimethyl ammonium chloride alkyl dimethyl benzyl ammonium chloride Page 1 / 5

4 Specific chemical identity and/or exact percentage of composition has been withheld as a trade secret. 4. FIRST AID MEASURES -Eye Contact: -Skin Contact: -Inhalation: -Ingestion: te to Physicians: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention. Wash with soap and water. If skin irritation occurs: Get medical attention. Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a poison control center or physician if you feel unwell. Rinse mouth. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention if you feel unwell. Treat symptomatically. 5. FIRE-FIGHTING MEASURES Suitable Extinguishing Media: Specific Hazards Arising from the Chemical: Hazardous Combustion Products: Protective Equipment and Precautions for Firefighters: Product does not support combustion, Use extinguishing agent suitable for type of surrounding fire Dried product is capable of burning. Combustion products are toxic. May include Carbon monoxide Carbon dioxide and other toxic gases or vapors. Wear MSHA/NIOSH approved self-contained breathing apparatus (SCBA) and full protective gear. Cool fire-exposed containers with water spray. 6. ACCIDENTAL RELEASE MEASURES Personal Precautions: Environmental Precautions: Methods for Clean-Up: Avoid contact with skin, eyes or clothing. Use personal protective equipment as required. Do not rinse spill onto the ground, into storm sewers or bodies of water. Prevent further leakage or spillage if safe to do so. Contain and collect spillage with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see Section 13). 7. HANDLING AND STORAGE Advice on Safe Handling: Storage Conditions: Handle in accordance with good industrial hygiene and safety practice. Wash thoroughly after handling. Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach of children. Keep from freezing. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Occupational Exposure Limits: Engineering Controls: Personal Protective Equipment Eye/Face Protection: Skin and Body Protection: Respiratory Protection: General Hygiene Considerations: ne established. Provide good general ventilation. If work practices generate dust, fumes, gas, vapors or mists which expose workers to chemicals above the occupational exposure limits, local exhaust ventilation or other engineering controls should be considered. Wear splash goggles. Wear rubber or other chemical-resistant gloves. t required with expected use. If occupational exposure limits are exceeded or respiratory irritation occurs, use of a NIOSH/MSHA approved respirator suitable for the use-conditions and chemicals in Section 3 should be considered. Wash hands and any exposed skin thoroughly after handling. See 29 CFR for further guidance. Page 2 / 5

5 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance/Physical State: Liquid Color: Clear Odor: Mild ph: Melting Point / Freezing Point: Boiling Point / Boiling Range: 100 C / 212 F Flash Point: > 100 C / > 212 F ASTM D56 Evaporation Rate: < 1 (BuAc = 1) Flammability (solid, gas) Upper Flammability Limit: Lower Flammability Limit: Vapor Pressure: Vapor Density: Specific Gravity: Solubility(ies): Soluble in water Partition Coefficient: Autoignition Temperature: Decomposition Temperature: Viscosity: 10. STABILITY AND REACTIVITY Reactivity: This material is considered to be non-reactive under normal conditions of use. Chemical Stability: Stable under normal conditions. Possibility of Hazardous Reactions: t expected to occur with normal handling and storage. Conditions to Avoid: Extremes of temperature and direct sunlight. Incompatible Materials: Strong oxidizing agents. Strong acids. Hazardous Decomposition May include carbon monoxide, carbon dioxide (CO2) and other toxic gases or vapors. Products: 11. TOXICOLOGICAL INFORMATION Likely Routes of Exposure: Eyes, Skin, Ingestion, Inhalation. Symptoms of Exposure: -Eye Contact: Pain and redness. -Skin Contact: Drying of the skin. -Inhalation: Nasal discomfort and coughing. -Ingestion: Pain, nausea, vomiting and diarrhea. Immediate, Delayed, Chronic Effects Product Information: Data not available or insufficient for classification. Numerical Measures of Toxicity The following acute toxicity estimates (ATE) are calculated based on the GHS document.. ATEmix (oral): mg/kg ATEmix (dermal): mg/kg ATEmix (inhalation-dust/mist): mg/l Component Acute Toxicity Information Chemical Name Oral LD50 Dermal LD50 Inhalation LC50 water > 90 ml/kg ( Rat ) t Available t Available alkyl dimethyl benzyl ammonium chloride = 426 mg/kg ( Rat ) t Available t Available Carcinogenicity: components present at 0.1% or greater are listed as to being carcinogens by ACGIH, IARC, NTP or OSHA. Page 3 / 5

6 Ecotoxicity 12. ECOLOGICAL INFORMATION Persistence and Degradability: Bioaccumulation: Other Adverse Effects: 13. DISPOSAL CONSIDERATIONS Disposal of Wastes: Contaminated Packaging: Dispose of in accordance with federal, state and local regulations. Dispose of in accordance with federal, state and local regulations. 14. TRANSPORT INFORMATION DOT: Proper Shipping Name: Special Provisions: IMDG: Proper Shipping Name: t Regulated n Hazardous Product Shipping descriptions may vary based on mode of transport, quantities, package size, and/or origin and destination. Check with a trained hazardous materials transportation expert for information specific to your situation. t Regulated n Hazardous Product 15. REGULATORY INFORMATION TSCA Status: (Toxic Substance Control Act Section 8(b) Inventory) All chemical substances in this product are included on or exempted from listing on the TSCA Inventory of Chemical Substances. SARA 313 This product does not contain listed substances above the "de minimus" level SARA 311/312 Hazard Categories Acute Health Hazard: Chronic Health Hazard: Fire Hazard: Sudden release of pressure hazard: Reactive Hazard: Yes California Proposition 65 This product is not subject to warning requirements under California Proposition 65. EPA Pesticide Registration Number: EPA Statement: This chemical is a pesticide product registered by the Environmental Protection Agency and is subject to certain labeling requirements under federal pesticide law. These requirements differ from the classification criteria and hazard information required for safety data sheets, and for workplace labels of non-pesticide chemicals. Following is the hazard information as required on the pesticide label: EPA Pesticide Label: CAUTION. Causes moderate eye irritation. Harmful if absorbed through the skin. Avoid contact with eyes, skin or clothing. Wash thoroughly with soap and water after handling. 16. OTHER INFORMATION NFPA Health Hazards: 1 Flammability: 0 Instability: 0 Special: N/A HMIS Health Hazards: 1 Flammability: 0 Physical Hazards: 0 Revision Date: 30-Jul-2015 Reasons for Revision: Section 14 and 15 Page 4 / 5

7 Disclaimer: The information provided in this Material Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. End of Safety Data Sheet Page 5 / 5