Manufacturing Power House Waterco s R&D division has led to the development of innovative products, meeting the challenges of change in the market

Size: px
Start display at page:

Download "Manufacturing Power House Waterco s R&D division has led to the development of innovative products, meeting the challenges of change in the market"

Transcription

1

2 Manufacturing Power House Waterco s R&D division has led to the development of innovative products, meeting the challenges of change in the market place. The key to Waterco s success has been its pioneering fibreglass and plastic moulding techniques, as well as its efficient manufacturing processes. 2

3 Waterco exports to over 40 countries via branches operating in Australia, New Zealand, Malaysia, China, the United Kingdom, France, United States of America, Canada and Indonesia as well as through international distributors. Waterco France 3 Rue Paul Rieupeyroux, SAINT PRIEST, France. Phone:+33 (0) Fax:+33 (0) info.watercofrance@waterco.com Waterco Europe Limited Radfield, London Road, Teynham, Sittingbourne, Kent ME9 9PS, United Kingdom. Tel: 44 (0) Fax: 44 (0) info@waterco.eu Effective 1st January

4 Transport weights & dimensions MICRON COMMERCIAL: Please find below a list of approximate shipping weights and dimensions for some of our commercial filters. SMD filters palletized: SMD x 100 x 220cm 180kgs SMD x 120 x 220cm 190kgs SMD x 130 x 220cm 220kgs SMD x 150 x 220cm 240kgs SMD x 170 x 220cm 260kgs SMD x 190 x 220cm 460kgs SPDD filters palletized: SPDD x 120 x 240cm 200kgs SPDD x 130 x 240cm 220kgs SPDD x 150 x 240cm 300kgs SPDD x 170 x 240cm 370kgs SPDD x 210 x 240cm 680kgs SPDD x 210 x 240cm 940kgs SPDD x 240 x 240cm 1250kgs SMDD filters palletized: SMDD x 100 x 240cm 80kgs SMDD x 100 x 240cm 182kgs SMDD x 120 x 240cm 200kgs SMDD x 130 x 240cm 240kgs SMDD x 150 x 240cm 300kgs SMDD x 170 x 240cm 380kgs SMDD x 190 x 240cm 450kgs SMDD x 210 x 240cm 630kgs SMDD x 240 x 240cm 940kgs LACRON COMMERCIAL: Lacron HZC filter palletized: HZC x 112 x 132cm 170kgs Lacron finaflow DBF filter palletized: DBF x 80 x 200cm 46kgs DBF x 80 x 200cm 65kgs DBF x 100 x 200cm 75kgs DBF x 100 x 200cm 180kgs Lacron LSC filter palletized: LSC x 100 x 110cm 83kgs LSC x 115 x 120cm 140kgs LSC x 120 x 130cm 150kgs IMPORTANT NOTE: weights and dimensions shown are approximate and shown as a guideline only. Details may vary slightly at time of shipping. 4

5 Hydrostorm ECO pump Hydrostorm ECO pump saves electricity because it can be operated at different speeds and is equipped with an energy efficient permanent magnet motor. Each speed is designed for different functions low speed for filtering, medium for water features and high for spa jets. Save time, water and energy Waterco s Enviropro range of pool equipment not only maximises your time in the pool, but also delivers significant water and energy savings BriteStream Multicoloured LED lights Britestream Multicoloured LED lights can produce a multitude of different colours without the need for a coloured lens. Its energy efficient super bright LEDs operate on only 15% of the electrical power of a halogen light. Domestic and Commercial Solutions Hydroxypure Chlorine Free Pool Sanitation A chlorine free swimming pool that is free from odours and taste, soft and gentle on the skin. Great news for swimmers with allergies and asthema. Save Time, Water and Energy MultiCyclone pre-filters MultiCyclone is a patented prefiltration device that can help you save water and reduce filter maintenance. Based on the principals of centrifugal water filtration, MultiCyclone collects up to 80% of the dirt before it reaches the pool filter and it only requires 15 litres of water to flush. Opal XL cartridge filters Opal XL cartridge filters house an over sized filter cartridge, maximising its dirt holding capacity and minimising filter maintenance, leading to significant water savings. Combined with a Multicyclone, Opal XL cartridge filters may only require a seasonal clean. Micron ECO S602 media filter Micron S602 media filter features an innovative, internal distribution system, which provides effective coverage of the filter bed and enables improved hydraulic efficiency and backwashing, leading to significant water savings of up to 30% compared to conventional media filters. MultiCyclone 12&16 Centrifugal MultiCyclone FiltrationPlus filter MultiCyclone Plus combines centrifugal and cartridge filtration into one streamline housing, creating an ultra compact filtration system that can be vertically installed on a pool pump. Multicyclone Plus not only saves water but also minimises the foot print of your pool s filtration system. Save time, water and energy Zane Solar Gulfpanels Zane Solar Gulfpanels effectively absorb the sun s heat and transfer it to your swimming pool. Gulfpanels offer MultiCyclone Plus / Ultra 12&16 outstanding heat transfer properties with Centrifugal Filtration exceptional durability. Zane Solar pays for itself in just a few years. After the initial setup cost, the heat is provided free from the sun. 5 Electroheat heat pumps The latest advancement in swimming pool heating, Electroheat heat pump extracts latent heat from the surrounding air, intensifies it and transfers it to your swimming pool. Electroheat heat MultiCyclone pumps are an XL70 Commercial energy efficient Centrifugal way Filtration to heat your pool and extend your swimming season. Contact: Tel: +44 (0) info@waterco.eu

6 Index Product Catalogue 8 Terms & Conditions of Sale 9 Conversion Tables Waterco Valves Flow Check Non Return Valves Flow vis valve FPI Valves Actuator Valves MPV table and MPVs General Pool Equipment - Filters MultiCyclone filters Trimline Cartridge Filter Opal Cartridge Filter Fulflo Tri-Cartridge Filter Fulflo D.E. Filter Exotuf thermoplastic filters Micron Side Mount Filter Micron Top Mount Filter Micron Top Mount Deep Bed Filter Sureflow TMV Top Mount Filter Lacron Bobbin Wound Filter Sureflow LSR Side Mount Filter Lacron Plus Filter Monobloc Systems Moulded Skid Base Leaf trapper Commercial Pool Equipment Filters Micron SMD Sand Filters Micron SMDD Sand Filters Micron SPDD Nozzle Plate Filters Micron Horizontal Filter Hydron Split tank filter Sureflow HZC Filter Lacron sureflow LSC Finaflow MBF Medium Bed Filter Finaflow DBF Deep Bed Filter Finaflow HPF High Pressure Deep Bed Filter Hi Flow LCX Filter Hi Flow LCP Filter Valve Battery sets Strainers, Pipe & fittings Filter Media Waterco EcoPure Glass Media Zeoplus Media Waterco Glass Pearls General Pool Equipment Pumps Aquamite Pump Lacronite Pump Lacronite Eco VS pumps Supatuf Pumps Supatuf Eco VS pumps Supastream Pump Turboflo Pump Hydrostorm Eco pump Hydrostorm Pump Hydrostorm Plus Pump Hydrotuf Pump Commercial Pool Equipment Pumps Hydrostar Pump Hydrostar Plus Pump Cast Iron Pump General Pool Equipment - Pool Water recirculation Skimmers Main Drains Water Leveller Flush Deck Grating Lights Britestream Underwater Niche LED Lights Britestream Underwater LED Lights Litestream Underwater Lights Sanitization Salt Chlorinators Hydroxypure Chlorine free system Pool Heating Heat Pumps Solar Heating Electric Heating 108 Spa Equipment & Accessories Top Load Niche Filter Aquaculture Products Bead Filter systems MultiCyclone Pumps Filtron Vortex Chambers Blowers Electric Heaters Purification Systems Warranty Terms and Conditions 6

7 Index Spare Parts Catalogue 2-19 Pumps Aquamite Supastream Supatuf Hydrotuf Lacronite Hydrostorm Hydrostorm Plus Turboflo Hydrostar 350 Hydrostar Commercial MK2 Hydrostar Commercial MK3 Cast Iron Pump Filters Top Mount Filter Side Mount Filter SMDD Side Mount Deep Bed Filter Hydron Commercial Filter Trimline Cartridge Filter Fulflo Cartridge Filter Top Load Cartridge Filter Opal XL filter Astra Fulflo D.E. Filter General Equipment M.P.V. Table 6 Way MPV 1½ / 50mm 6 Way MPV 2 / 63mm 4 Way MPV 1½ / 50mm MPV 2½ / 75mm SM AND TM MPV 3 / 90mm SM and TM Lacron Filters MultiCyclone Multicyclone Plus / Ultra 12 Multicyclone Plus / Ultra 16 TMV - 18 TMV - 20 TMV - 24 LSR - 16 LSR - 18 LSR - 20 LSR - 24 LSR - 30 Lacron Plus Top Mount 20 Lacron Plus Top Mount 24 Lacron Plus 20 Lacron Plus 24 Lacron Plus 30 LSC LSC LSC - 42 LSC - 48 DBF - 18 DBF 24 DBF - 30 DBF - 36 DBF 42 DBK 24 DBK 30 DBK 42 DBK 48 HPF 18 HPF 24 HPF 30 HPF 42 HZC 36 HZC 42 LC/LCX/LCP 1200 LC/LCX/LCP 1400 LC/LCX/LCP 1600 LC/LCX/LCP 1850 LCX/LCP LCX/LCP Hydron Split Tank General Equipment Electrochlor 25A, 30A Hydrochlor Waterking Inline Feeder Waterco S75 Skimmer Box Waterco Supaskimmer/fulflo Waterco SP5000 Skimmer Box Waterco Main Drain Auto Poolwater Leveller Whisper Air / Airflo Blowers Litestream Underwater Pool Light Britestream Pool Lights Heat Pumps Electroheat Heat Pump Electroheat Plus Heat Pump General Equipment Commandomatic Trimline Filter W & WD Series Deep Bed Filter 7

8 Terms and Conditions of Sale 1. PURCHASES We request that orders be made in writing using product code numbers and descriptions as published in our price list. This will minimise the possibilities of errors. 2. DELIVERY Delivery time will be 14 days from receipt of orders in the case of material available ex-stock. Where items are out of stock, we will specify supply date immediately upon receipt of order. Supply date is the date material leaves our warehouse as we cannot be held responsible for changes in shipping schedules or shipping delays. 3. PAYMENT Irrevocable Letter of Credit, with partial shipment allowed or payment in advance by telegraphic transfer unless credit arrangements have been approved. Orders below 3, (ex-sydney, Australia or ex-kuala Lumpur, Malaysia) will be accepted only on a prepayment basis unless credit arrangements have been approved. 4. MINIMUM ORDER There is a minimum order of 3, for sales from either Waterco Limited (ex-sydney, Australia) or sales from Waterco (Far East) Sdn. Bhd. (ex-kuala Lumpur, Malaysia). Handling charge of applies for orders below 3, however, this minimum order amount will not apply to sample orders, or depending on agreement, for a distributor start-up situation. Minimum order value for Waterco Europe is (excluding taxes and freight) or a surcharge of will apply. 5. PRICES Prices are inclusive of standard packing ex-warehouse and in. Waterco Europe Ltd reserves the right to change the price without prior notice. 6. WARRANTY All Waterco Europe Ltd products are manufactured using the finest quality materials available and are subjected to the most stringent quality and performance tests. Our products are warranted from date of purchase, as follows:- (for residential pools) Labour Pumps Domestic Filters Micron (Tank Only) Components Thermoplastic Filter (Tank Only) Components Trimline Cartridge Filter (Tank Only) DE Filters Components Accessories Commercial Filament Wound Filters Lacron Sand Filters Heat Pumps 1 year warranty on all products 3 years pump housing. 2 years motor and pump components and 1 year mechanical seal. For sea water/aquarium applications, 6 months if the pump is fitted with a silicone carbide mechanical salt water seal. 10 years 1 year 10 years (5 years full + 5 years pro rata warranty) 1 year 10 years (5 years full + 5 years pro rata warranty) 5 years (3 years full + 2 years pro rata warranty) 1 year 1 year, excluding light bulbs 10 years (5 years full, 5 years pro rata warranty) 10 years (5 year full + 5 years pro rata warranty) tank warranty, other components 2 years. 10 years Heat Exchanger, 3 years compressor, 2 year all other parts This warranty does not cover any failure in service caused by improper installation, or improper operation as a result of noncompliance with the maintenance and installation manual. Nor is any failure as a result of fire, wreckage, freezing, willful abuse, improper repackaging or damage incurred in transportation. Warranty will also not cover consequential damage resulting from any failure in service. Faulty parts will be replaced free of charge, after inspection by our Quality Control Department. 7. ORDERS The customer shall, within fourteen (14) days upon receipt of a completed order, report to Waterco Europe Ltd in writing, all incorrect deliveries. Deliveries shall be assumed to be correct and no adjustment shall be made unless such notice is provided to Waterco Europe Ltd within fourteen (14) days of the date of receipt of the goods. No stock returns will be accepted without prior written agreement from Waterco Europe Limited. A 25% re-stocking fee is payable on any non-warranty returns; such items will not be accepted any later than 3 months after original dispatch date. 8. OWNERSHIP OF GOODS Ownership of the goods in all cases shall be retained by Waterco Europe Ltd until payment is made for such goods and for all goods supplied by Waterco Europe Ltd to the customer and such payment is received in full. In the event that the customer fails to make payment within the due time stipulated by Waterco Europe Ltd, Waterco Europe Ltd shall have the right to enter upon the premises of the customer and to regain possession of the said goods. In the event that such goods are sold by the customer prior to payment thereof, or if they shall become constituents of other goods, then the proceeds of sale thereof shall be the property of Waterco Europe Ltd. 9. DISPUTES Any dispute must be received in writing by Waterco Europe Ltd within 14 days of receipt of goods. 8

9 Kilowatts x 3412 = B.T.U. Kg x = Pounds H.P. x = Kilowatts Inches x = Centimetres Feet x = Metres Sq. Ft. x = Sq. Metres some useful conversions Conversion Tables Ft 2 x = m 3 Ft 3 x = Gallons (imperial) m 3 x 220 = Gallons (imperial) imp Gallons x = Litres Ft 3 x = Litres m 3 x 1000 = Litres Imperial Gallon = US Gallons = m 3 = litres US Gallons = Imperial Gallons = m 3 = litres 1m 3 = 220 Imperial Gallons = US Gallons = 1,000 litres 1 Litre = Imperial Gallons = US Gallons = m 3 pipe size UPVC & abs imperial pipe - dimensions and flow rates pipe class outside diameter internal diameter 1ft Head = metres head = psi = bar = inch/hg vacuum = kgf/cm 2 cross section area head and pressure suction flowrate max flow at 1.2m/ sec velocity return flowrate max flow at 2.0m/ sec velocity inches inches inches square inches gal/hour m 3 /hour gal/hour m 3 /hour 0.5 E E E E C C E E metre Head = 3.281ft ft Head = psi = bar = inch/hg vacuum = kgf/cm 2 EquivALENT METRIC IMPERIAL Outside Dia. Outside Dia. Nominal Outside Dia. (Imperial) Bore (Imperial) 20mm / None 1/ mm / mm mm / mm / mm mm / mm mm mm 4.92 none 140mm mm IMPORTANT NOTE: When refering to pipe sizes, metric pipe is quoted by its actual outside diameter. Imperial pipe is quoted by its nominal bore or inside diameter. 9

10 Contents VALVES FILTERS COMMERCIAL FILTERS MEDIA Pumps Pool Water Recirculation Lights sanitization Cleaning accessories Heating Spa Equipment AquaCULTURE Water Treatment & Terms and Conditions 10 Table Of Contents

11 Valves 11 Waterco Valves

12 Waterco Valves FLOW CHECK NON RETURN VALVE Flow Check Valve /75mm Flow Check Valve /2½ Flow Check Valve 90 63/75mm Flow Check Valve 90 2 /2½ W22876 Bevel plate assembly Flow Check Valve 180º The Flow Check Valve has been designed to be simple to install, inspect and service. With a stainless steel spring designed for minimal hydraulic losses and a stronger positive seal, it is ideal for both inlet and return lines. Stainless steel fasteners (316 grade) Stainless steel spring designed for minimal hydraulic losses and a strong positive seal Clear polycarbonate lid for simple inspection UV stabilised PVC body EPDM flapper gasket Flow Check Valve 90º The Check Valve s pressure rating of 4 BAR (58 psi) and its 316 stainless steel fasteners make it suitable for domestic and commercial applications. Eliminate the loss of prime on the suction side of a pump. Prevent the drain down of water towards pumps and filters. Prevent water flow in an unwanted direction. Pressure Drop (kpa) ½" Flow Check Valve Pressure Drop 90º 2-way 180º 2-way Flow (m³/hr) FLOW VIS - FLOW METER VALVE FLOW VIS - FLOW METER MODEL FV-C-L 2 / With the combined functionality of a flow meter and a check valve, new for 2015 the Flow Vis flow meter is a precision flow meter designed specifically for pools/spas and water features. A versatile tool which can be installed horizontally, vertically or upside down and still offering and average accuracy of 2.01% between GPM. No calibration is required and the Flow Vis has a clear easy-read scale in lpm and is suitable up to 3.5 Bar. It can be used either as a permanent or temporary installation, and it s the ideal valve to install in conjunction with variable/multi-speed pumps and heating equipment. This will enable accurate pump operating speed adjustments to ensure sufficient water flow to the pool s filtration, sanitising and heating equipment. 12

13 Waterco Valves FPI VALVES - with teflon seals Way Valve slip fit - Teflon impregnated seals 1½ / Way Valve slip fit - Teflon impregnated seals 1½ / Way Valve slip fit - Teflon impregnated seals 50mm Way Valve slip fit - Teflon impregnated seals 50mm Way Valve slip fit - Teflon impregnated seals 2 /2½ Way Valve 360 slip fit - Teflon impregnated seals 2 /2½ Way Valve slip fit - Teflon impregnated seals 63/75mm Way Valve 360 slip fit Metric- Teflon impregnated seals 63/75mm Teflon impregnated seal Strong PVC body for maximum durability Large Easy Turn handle Stainless Steel Hardware 4 Bar Rated Teflon seals Teflon seals offer minimal friction and smooth operation. Quick installation The FPI valve body is made from UPVC. Its compatibility with PVC pipes will ensure quick setting and a stronger bond. Engineered strength Both the FPI Valve lid and handle are constructed from premium ABS plastic. The valve s steel components are constructed from high quality 316 grade stainless steel. High pressure rating The advanced design and construction of the FPI valves enable them to withstand a working pressure of 4 BAR (58 psi). FPI VALVES ACTUATOR Part No. Product Description Price VAC FPI Valve Actuator Designed to operate 2-way and 3-way FPI valves Adjustable cam rotates diverter valves to multiple degree settings Provides automatic control of valves for water features, pool/spa combinations, solar collectors and pool cleaners Retro-fits into all pool/spa control systems offered in the market Specifications Voltage 24 VAC Amps 0.65 Torque 250 inch pounds (288 kilograms force centimeter) Material Housing - Noryl: Gears - steel Grease MoS2 Lubricant Cord length 15 (457.2 cm) Rated Outdoor use 182mm 161mm 122mm 94mm 115mm 67mm Actuator FPI Valves Part No. Product Description Price Way Valve Slip fit-teflon impregnated seal 2 /2½ Way Valve Slip fit-teflon impregnated seal 2 /2½ The actuator FPI valve is specifically designed to be used in conjunction with the FPI valve actuator ( above). By simply unscrewing the thumb screw the valve handle can be removed and the valve actuator fitted. 13

14 Waterco Valves MULTIPORT VALVE TABLE Part Number Product Description: MPV TYPE SUITS FILTER MODEL TOP MOUNT MPVs All valves come complete with quick connect unions, pressure gauge and air-relief valve EUM 50mm c/w unions S ; TMV 20 & 24 ; Lacron Plus TM 20 & ½ 50mm Metric 6 Clamp w B/U T400; T450; T EURO 2 /63mm male threaded port (W) S702-S800 ; SD EURO 2½ /75mm MPV slip fit SD EUM 1½ Collar Type S700, S600 Premium EUM 1½ /50mm clamp Type Valve S600 ; T600 (old style) EUM 1½ /50mm clamp Type Valve E600 Exotuf ; E600 Exotuf Plus 1.5 ; E500 Exotuf ; E500 Exotuf Plus EUM 2 /63mm Clamp type valve E600 Exotuff Plus 2 ; E702 Exotuf ; E702 Exotuf Plus SIDE MOUNT MPVs ½ /50mm MPV (Suits sweep elbow ) LSR ; LSR plus ; LFW ; E600 Exotuf SM (1.5 ); E500 Exotuf SM ; SM MPV -White (30 only suits sweep elbow ) LSC /90mm Side Mount MPV only LSC LSC EURO 2 /63mm MPV only SM700 - SM900 ; LFW 30 ; E600 Exotuf SM (2 ) ; E702 Exotuf SM ; Lacron LSR Plus /90mm MPV only (Waterco) SMD ; SMDD ; SPDD /90mm MPV c/w p/kit (Waterco) SMD ; ½ Slip Fit c/w p/kits SM SM w/o p/kits SMD ; SMDD ; SPDD c/w p/kit SMD1600-SMD Bar Rated Metric or imperial quick connect unions. Heavy duty ABS construction. High grade stainless steel components. 6 way multiport valve positions. Durable lever action handle. Pressure gauge. Wear resistant rotor. Clear sight glass for backwash inspection. Clear filled thermoplastic for maximum strength. Waterco Multiport Valves Constructed from heavy duty ABS and GFPP, Waterco Multiport valves are designed for maximum performance and working pressures. Waterco s entire range of Multiport valves are engineered to withstand a working pressure of up to 4 bar (58 psi) with a test pressure of 6 bar (87 psi). 14

15 Waterco Valves WATERCO DOMESTIC MULTIPORT VALVES All valves are complete with quick connect unions, pressure gauge & air relief valve Top Mount MPV EUM Top Mount 6 way valve 1½ /50mm EUM Top Mount 6 way valve 1½ /50mm EUM Top Mount 6 way Collar Type (old style Thermoplastic) 1½ /50mm EUM Top Mount 6 way Clamp Style (T600) 1½ /50mm EUM Top Mount 6 way Clamp Style (Exotuf E600) 1½ /50mm Top Mount 6 way Clamp Type Valve (T400,T450, T500) 1½ /50mm EURO Top Mount 6 way valve c/w quick connect unions 2 /63mm Side Mount MPV only SM MPV only (suits sweep elbow) 1½ /50mm c/w 1.½ imperial & 50mm metric quick connect unions EURO SM MPV only (suits sweep elbow) 2 /63mm c/w 2 imperial & 63mm metric quick connect unions 4104 Lacron SM valve - white 2 Sweep Elbow Kits - Waterco Filters ½ Waterco Sweep Elbow Kits with o-ring 1½ Waterco Sweep Elbow Kits with o-ring WATERCO COMMERCIAL 4 Bar 6 WAY MULTIPORT VALVES All valves come complete with quick connect unions, pressure gauge & air relief valve. Side Mount ½ /75mm Side Mount MPV only 2½ /75mm ½ /75mm Side Mount MPV c/w plumbing kit 2½ /75mm /90mm Side Mount MPV only 3 /90mm /90mm Side Mount MPV c/w plumbing kit 3 /90mm /110mm Side Mount MPV only 4 /110mm /110mm Side Mount MPV c/w plumbing kit 4 /110mm , Top Mount ½ /75mm Top Mount MPV only 2½ /75mm /90mm Top Mount MPV only 3 /90mm FILTER TANK TO MPV PLUMBING KITS - Lacron Filters Part No. Product Description Price Old Style Lacron LSR Filters (pre 2004) tank - 1½ Plumbing kit Sweep Elbow with gasket /24 tank - 1½ Plumbing kit Sweep Elbow with gasket New Style - Lacron LSR WFE Filters (post 2004) /18/20/24 tanks Plumbing kit with o-ring tank Plumbing kit with gasket PLEASE NOTE: 1½ Lacron filters manufactured pre 2004 will have union adaptors (Barrel Unions) with flat gaskets. 1½ Lacron filters manufactured post 2004 will have union adaptors (Barrel Unions) with O rings 15

16 Waterco Filters

17 Filters Waterco Filters

18 General Filters CENTRIFUGAL WATER FILTRATION WATERCO MULTICYCLONE FILTER MultiCyclone Ultra MC16 (75) c/w 75sqft. Cartridge 2 / 63mm MultiCyclone Ultra MC12 (75) c/w 75sqft. Cartridge 1 1 /2 / 50mm MultiCyclone Ultra replacement cartridge 75sqft. / 6.5m² For base stands please see page 23 Imperial / Metric quick fit unions Pressure gauge MC12 (75) Hydraulically efficient design Glass filled thermoplastic MC16 (75) Save time, water and energy. 944mm / 37.2" Specifications MultiCyclone 12 Ultra 271mm / 10.7" 337mm / 13.3" 977mm / 38.5" Model Hydrocyclones Connection Ports MultiCyclone 16 Ultra 271mm / 10.7" Minimum Flow 337mm / 13.3" Maximum Flow 75ft 2 pleated filter cartridge 12 / 16 hydrocyclones Clear poly carbonate sediment chamber 1 / 32mm purge valve The Multicyclone Ultra has all the benefits of the ever popular Multicyclone with the addition of a 75ft 2 cartridge filter located in the upper housing. Incoming water enters the hydrocylones tangentially, generating a strong centrifugal effect. The sediment particles are then spun out to the hydrocyclone s wall, and spiral down into the sediment chamber. The filtered water then migrates towards the centre of the hydro cyclone where the water reverses and spirals upwards and through a 75ft 2 cartridge element before exiting the Multicyclone Plus. The addition of the cartridge element provides the highest standard of filtration possible with very little need for cleaning. The majority of the sediment is removed by the hydrocyclones. The sediment level can be visually monitored through the Multicyclones clear sediment bowl. The pressure gauge located at the top of the unit indicates when the cartridge requires cleaning. The cartridge can easily be removed by undoing the locking ring. Filter Area Maximum Pool Size Maximum Pressure MultiCyclone12 Ultra 12 1½ / 50mm 2.4m 3 /h 13.5m 3 /h 75ft 2 / 6.5 m² 81m BAR 350 kpa (50psi) MultiCyclone16 Ultra 16 2 / 63mm 3m 3 /h 16.8m 3 /h 75ft 2 / 6.5 m² 100m BAR 350 kpa (50psi) 18

19 General Filters CENTRIFUGAL WATER FILTRATION PLUS WATERCO MULTICYCLONE FILTER MultiCyclone Plus MC16 c/w 40sqft. Cartridge 2 / 63mm MultiCyclone Plus MC12 c/w 40sqft. Cartridge 1 1 /2 / 50mm MultiCyclone Plus replacement cartridge 40sqft. / 3.7m² For base stands please see page 23 Imperial / Metric quick fit unions MC12 (40) Pressure gauge 40ft 2 pleated filter cartridge MC16 (40) Save time, water and energy. 769mm / 30.3" Specifications MultiCyclone 12 Plus 271mm / 10.7" 337mm / 13.3" 803mm / 31.6" Model Hydrocyclones Connection Ports MultiCyclone 16 Plus 271mm / 10.7" Minimum Flow 337mm / 13.3" Maximum Flow Glass filled thermoplastic Hydraulically efficient design 12 / 16 hydrocyclones Clear poly carbonate sediment chamber 1 / 32mm purge valve The Multicyclone Plus has all the benefits of the ever popular Multicyclone with the addition of a 40ft 2 cartridge filter located in the upper housing. Incoming water enters the hydrocylones tangentially, generating a strong centrifugal effect. The sediment particles are then spun out to the hydrocyclone s wall, and spiral down into the sediment chamber. The filtered water then migrates towards the centre of the hydrocyclone where the water reverses and spirals upwards and through a 40ft 2 cartridge element before exiting the Multicyclone Plus. The addition of the cartridge element provides the highest standard of filtration possible with very little need for cleaning. The majority of the sediment is removed by the hydrocyclones. The sediment level can be visually monitored through the Multicyclones clear sediment bowl. The pressure gauge located at the top of the unit indicates when the cartridge requires cleaning. The cartridge can easily be removed by undoing the locking ring. Filter Area Maximum Pool Size Maximum Pressure MultiCyclone12 Plus 12 1½ / 50mm 2.4m 3 /h 9m 3 /h 40ft 2 / 3.7m 2 55m BAR 350 kpa (50psi) MultiCyclone16 Plus 16 2 / 63mm 3m 3 /h 13.5m 3 /h 40ft 2 / 3.7m 2 80m BAR 350 kpa (50psi) 19

20 General Filters CENTRIFUGAL WATER FILTRATION WATERCO MULTICYCLONE FILTER MultiCyclone MC16 2 / 63mm MultiCyclone MC /2 / 50mm For base stands please see page 23 Quick fit unions MC16 UV and corrosion proof Hydraulically efficient design Multiple hydro cyclones Glass filled reinforced thermoplastic Lock ring Clear poly carbonate sediment bowl 32mm / 1 sediment purge valve Incoming water enters hydro-cyclones tangentially, generating a strong centrifugal effect. The sediment is spun out to the hydro-cyclone s wall, and then spirals down to the sediment chamber. The filtered water migrates towards the centre of the hydro cyclone where the flow reverses and spirals upwards through the outlet. Accumulation of sediment can be visibly monitored through the MultiCyclone s clear sediment chamber. The MultiCyclone is easily cleaned by opening the valve. Only 15 litres of water is discharged to cleanse the MultiCyclone. MultiCyclone is easy to install and fits to most existing filtration systems. There are no moving parts to wear out and replace and it s backed by Waterco s 2 year warranty. MC12 Save time, water and energy. Specifications Model Hydrocyclones Connection Ports Minimum Flow Maximum Flow Maximum Pool Size Maximum Pressure MultiCyclone ½ / 50mm 2.4m 3 /hr 18m 3 /hr 55m kpa (50psi) 3.5 Bar MultiCyclone / 63mm 3m 3 /hr 30m 3 /hr 80m kpa (50psi) 3.5 Bar 20

21 General Filters INDUSTRIAL CENTRIFUGAL WATER FILTRATION WATERCO MULTICYCLONE FILTER MultiCyclone Pro 7 Bar pre-filter 2 / 63mm The MultiCyclone Pro has all the benefits of the standard MultiCyclone model with the added benefit of being able to withstand higher pressure. Rated to 7 bar the MultiCyclone Pro is specifically designed for the more demanding industrial market. 600mm / 23.6" Save time, water and energy. 7 BAR Manufactured using UV and corrosion resistant glass-filled reinforced thermoplastic the MultiCyclone Pro offers all water saving benefits of our MultiCyclone technology together with the strength and durability necessary for a industrial installation. 294mm / 11.6" 270mm / 10.6" Specifications Model Hydrocyclones Connection Ports Minimum Flow Maximum Flow MultiCyclone16 Pro 16 2 / 63mm 3m 3 /hr 30m 3 /hr Maximum Pressure 690 kpa (100psi) 7 Bar WATERCO MULTICYCLONE BASE STANDS Part No. Product Description Price MultiCyclone Base MKII version MultiCyclone Base - over pump version MultiCyclone Base MKII version Dimensions: 360mm (H) x 360mm (W) x 329mm (D). MultiCyclone base stands stands are suitable for: MultiCyclone 12 & 16 MultiCyclone Plus 12 & 16 MultiCyclone Ultra12 & 16 Over pump stand Dimensions: 795mm (H) x 440mm (W) x 350mm (D) 21

22 General Filters 70 XL COMMERCIAL COMMERCIAL CENTRIFUGAL WATER FILTRATION WATERCO MULTICYCLONE FILTER MultiCyclone 70 XL Commercial 4 /110mm 1, The MultiCyclone Commercial 70XL is a new addition to the MultiCyclone range. Although very different in appearance to the previously released models, this unit still has all the water and energy saving benefits of the standard MultiCyclone model. Specifically designed for commercial installations, the MultiCyclone Commercial has 4 / 110mm ports and uses 70 cyclones allowing it to function with a flow rate of 90m³/hr. The debris can be seen through the clear sight glass and flushed out of the purge valve. A B Specifications Model MultiCyclone 70 XL Commercial Connection Ports Minimum Flow Maximum Flow Maximum Pressure 4 /110mm 36m³/hr 90m³/hr 3.5Bar/50psi/350kPa Dimensions (mm) I C Model A B C D E F G H I MultiCyclone Commercial Pre-Filter 710 mm mm mm mm 400 mm mm mm mm mm H D F G E 16 MultiCyclone 70XL Head Loss Curve Head Loss (m) Flow (m3/hr) Save time, water and energy. 22

23 General Filters WATERCO TRIMLINE CARTRIDGE FILTERS Bar pressure rating Filter supplied with both 1½ Imperial and 50mm quick connect unions EU Trimline CC50 incl. cartridge 50 sq.ft 21475EU Trimline CC75 incl. cartridge 75 sq.ft EU Trimline CC100 incl. cartridge 100 sq.ft Model Maximum Area Dom. flow Working Pressure Max. Pool Size Overall Weight m 2 m 3 /hr Bar psi m 3 kg CC / CC / CC / Trimline cartridge filters are compact, economical filters designed to effectively filter out suspended solids from your pool. Trimline cartridge filters utilise a specially treated synthetic fabric which is pleated into a cartridge. Cartridge filters are ideal for applications where backwashing may not be practical. Air relief valve Easy to read pressure gauge Hand operated lid lock ring, allowing simple cartridge removal and replacement Inbuilt airbleed - eliminates air build up in tank High impact polypropylene body Pleated filter cartridge 1½ / 50mm half unions 250mm 7.8mm 197.7mm Trimline Pleated Filter Cartridge The Trimline pleated filter cartridges are fabricated from pleated reusable polyester fabric. The media has been pleated to provide 4.6 to 9.3 square metres of surface area in order to maximise the cartridge dirt holding capacity and extend the time between cleaning. Model CC50 605mm CC75 720mm CC mm Material : Polyester Fabric material, Vinyl Plastisol end caps and a Polypropylene core Operating Temperature : 4 C to 50 C Maximum Pressure Drop : 0.2 Bar / (3psi) Simple Maintenance The filter cartridge is easily cleaned by hosing the pleats with a standard garden hose mm 384.2mm Save time, water and energy. Warranty Waterco is proud to show its absolute confidence in its range of Trimline cartridge filters by offering a 10 (5+5) tank warranty and 1 year warranty on all other components, excluding cartridge. Commercial applications attract a 1 year tank warranty. 23

24 General Filters OPAL CARTRIDGE FILTER (10 year conditional warranty) 3.5 Bar pressure rating Opal Cartridge Filter sq.ft Opal Cartridge Filter sq.ft Air relief valve. Easy to read pressure gauge. Hand operated lid lock ring, allowing simple cartridge removal and replacement. Solid one piece moulded polymer tank. Low profile for easy cartridge removal and inconspicuous enclosure. Tough heavy duty polyester filter fabric with wide and deep pleats for better filter efficiency, easy cleaning and longer cartridge life. Constructed from high impact polypropylene and designed for easy maintenance, Opal cartridge filters house a large filter cartridge to maximise its dirt holding capacity and minimise filter maintenance, leading to significant water savings. Screw down lid, requires no clamps or tools for simple cartridge removal and replacement 2 / 63mm inlet and outlet ports for maximum flow and minimum back pressure Heavy duty extra large pleated filter cartridge Specifications Model Filter Area Max Flow Rate Working Pressure Max Pool Size (m 2 ) (ft 2 ) m 3 /hr Bar psi m 3 Opal Opal Pleated Filter Cartridge The Opal Filter s Cartridges are fabricated from pleated reusable polyester fabric. The media has been pleated to provide 12.5m 2 to 16.7m 2 of surface area in order to maximise the cartridge dirt holding capacity and extend the time between cleaning. Material : Polyester Fabric material, Vinyl Plastisol end caps and a Polypropylene core Operating Temperature : 4ºC to 50ºC Maximum Pressure Drop : 0.2 Bar / (3 psi) 2 /63mm quick connect barrel unions for UPVC pipe. Simple Maintenance The filter cartridge is easily cleaned by hosing the pleats with a standard garden hose. 393mm / mm / 19 Save time, water and energy. 60mm / mm /

25 General Filters OPAL XL CARTRIDGE FILTER (10 year conditional warranty) 3.5 Bar pressure rating Opal XL Cartridge Filter sq.ft Opal XL Cartridge Filter sq.ft Specifications Model Filter Area Max Flow Rate Working Pressure Max Pool Size (m 2 ) (ft 2 ) m³/h Bar psi m³ Opal Opal Constructed from high impact polypropylene and designed for easy maintenance, Opal XL cartridge filters house an extra large filter cartridge to maximise its dirt holding capacity and minimise filter maintenance, leading to significant water savings. Screw down lid, requires no clamps or tools for simple cartridge removal and replacement 2 / 63mm inlet and outlet ports for maximum flow and minimum back pressure Heavy duty extra large pleated filter cartridge Extra Large Filter Cartridge Opal XL filter cartridges are fabricated from pleated reusable polyester fabric. The XL larger size cartridge has been pleated to provide 225ft 2 (20.9m 2 ) to 270ft 2 (25.1m 2 ) of surface area maximising its dirt holding capacity and minimising filter maintenance. Material Operating Temperature Maximum Pressure Drop Simple Maintenance The filter cartridge is easily cleaned by hosing the pleats with a standard garden hose. Dimensions (mm) 480 : Polyester Fabric material, Plastisol end caps and a Polypropylene core : 4 C to 50 C : 0.2 Bar (3 psi) Opal 270 Opal * 1170 * Save time, water and energy. * Minimum Clearance Height to Remove Cartridge (mm) 25

26 General Filters WATERCO TRI CARTRIDGE FILTERS EU Fulflo Tri-Cartridge Filter C sq ft EU Fulflo Tri-Cartridge Filter C sq ft EU Fulflo Tri-Cartridge Filter C sq ft , Hand release clamp for easy maintenance Air relief valve Pressure gauge Three pleated filter cartridges Non-corrosive, durable, polypropylene tank Split tank design for easy maintenance Fulflo Tri-cartridge filter houses three individual pleated filter cartridges, to maximise its dirt holding capacity and minimise filter maintenance, leading to significant water savings. Built to endure the rigours and pressures of the outdoor environment, Fulflo Tri Cartridge Filters are made from specially engineered polymers that have been tested for durability and strength. Maintenance The Tri Cartridge Filter s split tank design incorporates an easy to use clamp that requires no additional tools for simple cartridge removal and replacement, allowing for quick access to the filter cartridge without disturbing the piping and connections. 50mm quick connect unions Sturdy support base Filter Cartridge At the heart of the Fulflo Tri Cartridge Filters are three individual filter cartridges, constructed from heavy duty, easy-to-clean polyester fabric. The cartridge pleats create a large surface area providing a high dirt holding capacity, thus decreasing its cleaning frequency. Filter Rating : 30 Microns (nominal) Material : Polyester Fabric material, Vinyl Plastisol end caps and a Polypropylene core Operating Temperature : 4 C to 50 C Maximum Pressure Drop : 0.2 Bar (3 psi) Specifications Model No. Filter Area Filter Area Design Max. Pool FlowRate Size Max. Working (sq.ft.) (m 2 ) (m³/h) (m³) (Bar) (psi ) Save time, water and energy

27 General Filters WATERCO FULFLO D.E. FILTERS EURO Fulflo P2027 c/w 1½ MPV 27 sq.ft EURO Fulflo P2036 c/w 2 MPV 36 sq.ft EURO Fulflo P2048 c/w 2 MPV 48 sq.ft , Pressure gauge Air bleed valve High pressure capacity tank Complete filter septum Built to endure the rigours and pressures of the outdoor environment, Fulflo DE filter housings are made from specially engineered polymers that have been tested for durability and strength. The heart of the Fulflo DE filter is the septum, comprising 10 polypropylene covered grids. These grids are spaced far enough apart to prevent the DE clogging while still allowing backwashing to be 100% effective. Maintenance The Fulflo DE Filter s split tank design incorporates an easy to use clamp that requires no additional tools for simple cartridge removal and replacement, allowing for quick access to the filter cartridge without disturbing the piping and connections. Hand-release clamp for easy maintenance Long-lasting smooth poly-propylene fabric ensuring lower startup pressures and longer filter cycles Specifications Sturdy support base Control valve Sight glass Non-binding polypropylene grids Model Number P2027 P2036 P2048 Filter Area (sq m) Average Flow Rate (m³/h) Max. Pool Size (m³) Filter Media (kg) Dimensions (mm) Height - incl. pressure gauge to centre outlet to centre inlet Width Depth (including MPV) D Dimensions (mm) Model A B C D P mm 395 mm 95 mm 500 mm P mm 395 mm 95 mm 500 mm P mm 615 mm 95 mm 500 mm INLET B A OUTLET C 27

28 General Filters xotuf Exotuf, tough under pressure Manufactured from the highest grade of non corrosive materials and applying precision plastic injection moulding techniques, Thermoplastic filters are built for long lasting performance. WATERCO EXOTUF THERMOPLASTIC TOP MOUNT SAND FILTERS Bar pressure rating Part No. Product Description Price With 1½ Clamp Style Multiport Valve & Barrel Unions (10 yr cond. tank warranty). MPV supplied with both 50mm metric and 1½ imperial quick connect unions DP E500 c/w 6 way MPV DP E600 c/w 6 way MPV B D Technical Specification Model No. Valve Size ( /mm) Inner Dia. (mm) Filter Area (sq. m 2 ) Bed Depth (mm) Max. Flow* (m³/h) Max. Pool Size (m 3 ) Min. Backwash (m 3 /h) Media Volume (litres) Sand 16/30 (kg) Zeoplus Glass (kg) E500 1½ /50mm F A E600 1½ /50mm H C K E G Dimension (mm) Model Valve Size A B C D E F G H V K E500 1½ / 50mm E600 1½ / 50mm WATERCO THERMOPLASTIC TOP MOUNT SAND FILTERS Bar pressure rating Part No. Product Description Price With 1½ Clamp Style Multiport Valve & Barrel Unions (10 yr cond. tank warranty). MPV supplied with both 50mm metric and 1½ imperial quick connect unions DP T400 c/w 1½ MPV DP T450 c/w 1½ MPV B D Model Valve Inner Dia. (mm) Filter Area (sq. m 2 ) Backwash flowrate (m 3 /h) Sand Zeoplus Glass (kg) Bed Depth (mm) Dom. flow Max. Pool Size (m 3 ) (mm/inch) (kg) (m 3 /hr) T / 1 ½ T / 1 ½ E V G F A Dimension (mm) Model A B C D E F G H V K T T H K C 28

29 A P R W WATERCO EXOTUF THERMOPLASTIC SIDE MOUNT SAND FILTERS Bar pressure rating Part No. Product Description Price With 1½ or 2 side mount Multiport valve & barrel unions (10 yr cond. tank warranty). MPV supplied with both 50mm / 63mm metric and 1½ / 2 imperial quick connect unions E500 side mount filter c/w 1.5 (50mm) valve E600 side mount filter c/w 1.5 (50mm) valve E600 side mount filter c/w 2 (63mm) valve E702 side mount filter c/w 2 (63mm) valve Technical Specification Model xotuf Valve Inner Dia. (mm) Filter Area (sq. m 2 ) Backwash flowrate (m 3 /h) General Filters SIDE MOUNT Sand Zeoplus Glass (kg) Bed Depth (mm) Dom. flow Max. Pool Size (m 3 ) (mm/inch) (kg) (m 3 /hr) E / 1½ E / 1½ E600 63/ E702 63/ C X Z S T K V J H L E F Y Dimension (mm) Model A B C W R P E F K V H L X Y Z J S T E500 1½ E600 1½ E E B xotuf PLUS DEEP BED WATERCO EXOTUF PLUS DEEP BED SAND FILTERS Bar pressure rating Part No. Product Description Price With 1½ or 2 clamp style Multiport valve & barrel unions (10 yr cond. tank warranty). MPV supplied with both 50mm / 63mm metric and 1½ / 2 imperial quick connect unions DP E500 top mount deep bed c/w 1.5 (50mm) valve DP E600 top mount deep bed c/w 1.5 (50mm) valve DP E600 top mount deep bed c/w 2 (63mm) valve DP E702 top mount deep bed c/w 2 (63mm) valve Technical Specification B D Model Valve Inner Dia. (mm) Filter Area (sq. m 2 ) Backwash flowrate (m 3 /h) Sand Zeoplus Glass (kg) Bed Depth (mm) Dom. flow Max. Pool Size (m 3 ) (mm/inch) (kg) (m 3 /hr) E500 50/ E600 50/ E600 63/ E702 63/ E V K G F A Dimension (mm) Model A B C D E F G H V K E E600 1½ E E H C 29

30 General Filters In a conventional lateral system Dead legs exist between the laterals and water flow is not optimised through the filter bed. Waterco s Fish Tail lateral configuration eliminates any dead legs by improving water flow distribution through the filter bed. The fishtail lateral design significantly improves filtration and reduces backwash times ultimately saving water. This system is now standard on the Micron range. Waterco Micron Top and Sidemount Fibreglass Filters Waterco Side Mount Fibreglass Filter Filament Wound Filters Micron fibreglass filters embody the latest in fibreglass winding technology. Micron fibreglass vessels consist of an inner shell of fiberglass reinforced polyester resin wound over with fibreglass filament. Waterco s digitally controlled filament winding machine faultlessly winds continuous strands of high quality fibreglass filament under controlled tension filament to create a seamless one-piece vessel with refined consistency and superior quality. There are no welds or seams or special tank linings which can corrode or electrolyse. Inflow diffuser for even distribution of water flow across the filter bed. Pressure gauge. Six position Multiport valve with sight glass and quick connect half unions. Fibreglass wound tank, UV and Corrosion Resistant. Hydraulically balanced laterals to maximise water flow and filtration. Manual Drain Large filter base for stable floor mounting. Micron Top Mount Fibreglass Filter WATERCO MICRON SIDE MOUNT BOBBIN WOUND SAND FILTERS Bar pressure rating Filters with 8 neck lock ring c/w Multiport Valve & Barrel Unions (10 year full tank warranty) MPV supplied with both metric and imperial quick connect unions EU SM500 c/w 1½ MPV EU SM600 c/w 1½ MPV EU SM700 c/w 2 MPV EU SM750 c/w 2 MPV EU SM900 c/w 2 MPV 36 WATERCO MICRON SIDE MOUNT BOBBIN WOUND SAND FILTERS -4.0 Bar pressure rating EU SM500 c/w 1½ MPV EU SM600 c/w 1½ MPV EU SM750 c/w 2 MPV EU SM900 c/w 2 MPV 36 See commercial section for larger size Side Mount Filters up to 2.5m (98 ) , , , Model No. Inner Dia. (mm) Bed Depth (mm) Filter Area (m 2 ) Valve Size (mm/ ) Sand 16/30 (Kg) Zeoplus Glass (Kg) Dom. flow Max. Pool Size (m 3 ) Com. flow Min. Pool Size (m 3 ) (m 3 /hr) (m 3 /hr) SM /1½ SM /1½ SM / SM / SM / Model A B C W R P E F K V H L X Y Z J S T SM SM SM SM SM

31 General Filters WATERCO MICRON TOP MOUNT BOBBIN WOUND SAND FILTERS Bar pressure rating With Multiport Valve & Barrel Unions (10 year full tank warranty). MPV supplied with both metric and imperial quick connect unions DP S500 c/w 1½ MPV DP S600 c/w 1½ MPV DP S702 c/w 2 MPV DP S750 c/w 2 MPV DP S800 c/w 2 MPV B D Model No. Inner Dia. (mm) Bed Depth (mm) Filter Area (m 2 ) Valve Size (mm/ ) Sand Zeoplus Glass (kg) Dom. flow Max. Pool Size (m 3 ) Com. flow Min. Pool Size (m 3 ) (kg) (m 3 /hr) (m 3 /hr) S /1½ S /1½ S /1½ S / S / S / E H V K C G F A Model A B C D E F G H V K S S S S S S WATERCO MICRON TOP MOUNT BOBBIN WOUND DEEP BED FILTERS Bar pressure rating Part No. Product Description Nom.Size Price With Multiport Valve & Barrel Unions (10 year full tank warranty). MPV supplied with both metric and imperial quick connect unions SD400 c/w 1½ MPV SD500 c/w 1½ MPV SD600 c/w 1½ MPV SD750 c/w 2 MPV SD900 c/w 2 MPV , B D Filter model Inner Bed Diameter Depth (mm) (mm) Filter Area (m 2 ) Valve Size (mm/ ) Sand 16/30 (kg) Zeoplus Glass (kg) Dom. flow Max. Pool size (m 3 ) Com. flow Min. Pool size (m 3 ) (m 3 /hr) (m 3 /hr) SD /1½ SD /1½ SD /1½ SD / SD / E H V K C G F A Filter Model SD400 SD500 SD600 SD750 SD900 A B C D E F G H V K

32 General Filters LACRON SUREFLOW TMV - TOP MOUNT SAND FILTER 2.5 BAR Pressure rating MPV supplied with both metric and imperial quick connect unions, pressure gauge and air relief valve TMV-18 c/w MPV 1½ (50mm) TMV-20 c/w MPV 1½ (50mm) TMV-24 c/w MPV 1½ (50mm) B D Filter model Tank Diameter (mm) Bed Depth (mm) Filter Area (m 2 ) Valve Size (mm/inch) Pea Gravel (kg) Sand Zeoplus Glass (kg) Max. flow (m 3 /hr) Max. Pool size (m 3 ) (kg) TMV / 1½ NR TMV / 1½ NR TMV / 1½ NR E V G F A Model A B C D E F G H V K TMV TMV TMV H K C LACRON BOBBIN WOUND - LFW - SIDE MOUNT FILTER 2.5 BAR Pressure rating MPV supplied with both metric and imperial quick connect unions, pressure gauge and air relief valve LFW-20 c/w MPV 50mm/ 1 1 / LFW-24 c/w MPV 50mm/ 1 1 / LFW-28 c/w MPV 50mm/ 1 1 / LFW-30 c/w MPV 63mm/ Filter model Tank Diameter (mm) Bed Depth (mm) Filter Area (m 2 ) Valve Size (mm/inch) Pea Gravel (kg) Sand Zeoplus Glass (kg) Max. flow (m 3 /hr) Max. Pool size (m 3 ) (kg) LFW / 1½ NR LFW / 1½ NR LFW / 1½ NR LFW / 2 NR Model A B C D E F G H I J K L X LFW LFW LFW LFW

33 General Filters LACRON SUREFLOW LSR - SIDE MOUNT SAND FILTER Bar pressure rating With Connecting Pipes & Pressure Gauge LSR ½ Connections (50mm) LSR ½ Connections (50mm) LSR ½ Connections (50mm) LSR ½ Connections (50mm) LSR Connections (63mm) Filter model Tank Diameter (mm) Bed Depth (mm) Filter Area (m 2 ) Pea Gravel (kg) Sand Zeoplus Glass (kg) Max. flow (m 3 /hr) Max. Pool size (m 3 ) (kg) LSR NR LSR NR LSR NR LSR NR LSR Model B C D F G H I J K X LSR LSR LSR LSR LSR LACRON SUREFLOW LSR - SIDE MOUNT SAND FILTER Bar pressure rating With Multiport Valve - Unions & Pressure Gauge ACW LSR - 16 c/w 1½ MPV (50mm) ACW LSR - 18 c/w 1½ MPV (50mm) ACW LSR - 20 c/w 1½ MPV (50mm) ACW LSR - 24 c/w 1½ MPV (50mm) ACW LSR - 30 c/w 2 MPV (63mm) , Filter model Tank Diameter (mm) Bed Depth (mm) Filter Area (m 2 ) Valve Size (mm/inch) Pea Gravel (kg) Sand Zeoplus Glass (kg) Max. flow Max. Pool size (m 3 ) (kg) (m 3 /hr) LSR / 1½ NR LSR / 1½ NR LSR / 1½ NR LSR / 1½ NR LSR / Model A B C D E F G H I J K L X LSR LSR LSR LSR LSR

34 General Filters LACRON PLUS - TOP MOUNT DEEP BED FILTER Bar pressure rating With Multiport Valve Unions and Pressure Gauge Lacron Plus TM 20 c/w 1½ MPV Lacron Plus TM 24 c/w 1½ MPV , B A F E Filter Model Tank Diameter Bed Depth Filter Area Valve Size Pea Gravel Sand Zeoplus Glass Max. Flow (mm) (mm) (m 2 ) (inch,mm) (kg) (kg) (kg) (m 3 /hr, Std) TM /2 / 50 NR TM /2 / 50 NR Max. Pool Size (m 3 ) G C D Model A B C D E F G TM TM LACRON PLUS - SIDE MOUNT DEEP BED FILTER Bar pressure rating With Multiport Valve Union and Pressure Gauge Lacron Plus SM 20 c/w 1½ MPV Lacron Plus SM 24 c/w 1½ MPV Lacron Plus SM 30 c/w 2 MPV 30 1, , , Filter Model Tank Diameter Bed Depth Filter Area Valve Size Pea Gravel Sand Zeoplus Glass Max. Flow Max. Pool Size (m 3 ) (mm) (mm) (m 2 ) (inch,mm) (kg) (kg) (kg) (m 3 /hr, Std) SM /2 / 50 NR SM /2 / 50 NR SM / 63 NR A F C E G B D A F E G B D Model A B C D E F G SM SM SM Save time, water and energy. The Lacron Plus deep bed sand filter improves the filtration efficiency over standard filters by providing enhanced in-depth filtration and increased dirt capacity. The filter s bed depth retains finer dirt particles and colloidal particles to a far greater level than a filter with a standard bed depth. 34

35 General Filters WATERCO MONOBLOC SYSTEMS WATERCO SAND FILTRATION MONOBLOC SYSTEMS SKID Thermoplastic 400, MPV & Aquamite 033 pump SKID Thermoplastic 450, MPV & Aquamite 050 pump SKID Thermoplastic 500, MPV & Aquamite 075 pump SKID Thermoplastic 600, MPV & Aquamite 100 pump Model Valve Inner Dia. (mm) Filter Area (sq. m 2 ) Backwash flowrate (m 3 /h) Sand Zeoplus Bed Depth (mm) Dom. flow Max. Pool Size (m 3 ) (mm/inch) (kg) (kg) (m 3 /hr) T / 1 ½ T / 1 ½ T / 1 ½ T / 1 ½ Model HP Pmax Amps Phase Total Motor Flow Rate kw Length Frame Qmax Aquamite m 3 /hr Aquamite m 3 /hr Aquamite m 3 /hr Aquamite m 3 /hr Aquamite m 3 /hr Leaf trapper TRIMLINE BAG FLTR C50 LEAF TRAPPER 2 /63mm Waterco has developed a Leaf Trapper that incorporates a high quality and durable bag filter that enables high volume leaf & debris capture. The lid is clear for quick visual inspection of the Leaf Trapper s filter bag. The C50 Leaf Trapper is ideal for installation in areas of high leaf & debris collection prior to a pool s finer filtration system. The C50 Leaf Trapper is compact & economical, perfect for negative edge pools and infloor cleaning systems. MOULDED SKID BASES - (both sizes suit all Cartridge Filters) Part No. Product Description Price Moulded Skid Base suit T400, T Moulded Skid Base suit T500, T Ø300 Ø Ø278.4 Ø437 Ø Ø240 Ø

36 36 Waterco Commercial Filters

37 Commercial Filters 37 Waterco Commercial Filters

38 Commercial Filters Micron fibreglass filters Micron fibreglass filters embody the latest in fibreglass winding technology. Waterco s digitally controlled filament winding machine faultlessly winds continuous strands of high quality fibreglass filament under controlled tension to create a seamless one-piece vessel with refined consistency and superior quality. There are no welds or seams or special tank linings which can corrode or electrolyse. Waterco s quality control procedures ensure that the structural requisites of the product are achieved at every stage of production. This results in a 100% compliance of the end product with the specifications. The design and the manufacturing process of the whole vessel, utilising the latest filament winding machines, incorporation of non metallic fittings plus reinforced manhole openings with proprietary methods, is unique to Waterco. Why fibreglass instead of steel? Using non metallic components fibreglass pressure tanks are rapidly replacing steel tanks in numerous applications. Fibreglass vessels offer several advantages in comparison with steel vessels. Fibreglass vessels have a mechanical and chemical resistance superior to steel. Fibreglass tanks do not rust or corrode and are able to withstand damage from many types of water treatment chemicals. Fibreglass vessels weigh only 1 /3 the weight of steel vessels while maintaining the same level of strength. Their weight makes them easier to ship to the job site and easier to install. Once installed there are virtually no maintenance or repairs required. Steel vessels require the anti-corrosive coating to be maintained periodically and certified welders to make repairs to the lining with expensive epoxy coating. 38

39 Commercial Filters Micron Fish Tail laterals Conventional laterals are not suitable for larger sized commercial filters. Dead legs exist between the laterals and water flow is not optimised through the filter bed. Waterco s Fish Tail lateral configuration eliminates any dead legs by improving water flow distribution through the filter bed. Conventional lateral configuration Commercial vertical filters with 3 / 90mm ports Commercial vertical filters with 2 ½ / 75mm ports Commercial vertical filters with 4 /110mm, 6 /160mm, 8 /215mm ports Easy Reach Air Release System Waterco are the first to introduce the benefits of the easy reach air bleed system for commercial filters. Located directly under the sight glass, a valve may be fitted to the tank, which is connected directly to an internal air bleed system allowing any air to be simply bled from the filter without the need to manually bleed the air from filter lid or to use additional plumbing. 39

40 Commercial Filters MICRON SIDE MOUNT BOBBIN WOUND SAND FILTER - SMD Model Large double yoke lid with lifting eye Pressure gauge Quick connect unions (Up to and including SMD2000) Water purge and sand dump port Large stable base Fish Tail lateral configuration for maximum hydraulic performance 1m bed depth Ultra smooth bobbin finish Available in 2.5 bar, 4 bar, 6 bar and 8 bar pressure ratings Vinylester resin coating available Quick connect unions Nozzle plate available upon request Side hatch / Lateral manhole cover WATERCO MICRON SMD OPTIONAL EXTRAS W22115LAB Sight Glass Fitted 90mm W22115 Sight Glass 90mm SSHR200 Side Service Hatch - Round 200mm SSHR320 Side Service Hatch - Round 320mm SSHO320 Side Service Hatch - Oval 320 x 200mm SSHO420 Side Service Hatch - Oval 420 x 320mm *Lead times applicable for the above optional extras , MICRON SIDE MOUNT DEEP BED SAND FILTER - SMDD Model Pressure gauge Large double yoke lid and lifting eye Large clear sight glass Flanged connections Service hatch Large stable base Fish Tail lateral configuration for maximum hydraulic performance 1.2 m bed depth Ultra smooth bobbin finish Available in 2.5 bar, 4 bar, 6 bar and 8 bar pressure ratings Vinylester resin coating available Flanged connections Nozzle plate version (SPDD) 40

41 Commercial Filters WATERCO MICRON SIDE MOUNT BOBBIN WOUND SAND FILTERS - SMD 2.5 Bar - Excludes MPV (2.5 Bar) SMD1050 (3 /90mm port size) SMD1200 (3 /90mm port size) SMD1400 (3 /90mm port size) SMD1600 (3 /90mm port size) SMD1600 (4 /110mm port size) SMD1800 (4 /110mm port size) SMD2000 (4 /110mm port size) 79 2, , , , , , , WATERCO MICRON SIDE MOUNT BOBBIN WOUND SAND FILTERS - SMD 4.0 Bar - Excludes MPV (4.0 Bar) SMD1050 (3 /90mm port size) SMD1200 (3 /90mm port size) SMD1400 (3 /90mm port size) SMD1600 (3 /90mm port size) SMD1600 (4 /110mm port size) SMD1800 (4 /110mm port size) SMD2000 (4 /110mm port size) 79 3, , , , , , , PLEASE NOTE: Also available in 6.0 Bar and 8.0 Bar versions, price and lead times available upon request. Lateral under drain system WATERCO MICRON SIDE MOUNT BOBBIN WOUND SAND FILTER SMD 2.5 Bar with Lock Ring lid SMD1050 LOCKRING VERSION ( 3 / 90mm port size ) SMD1200 LOCKRING VERSION ( 3 / 90mm port size ) SMD1400 LOCKRING VERSION ( 3 / 90mm port size ) 56 Filter Model Connection Size Filter Area Bed Depth Maximum Flow Rating 30m 3 /hr/m 2 Maximum Flow Rating 40m 3 /hr/m 2 Sand ZeoPlus Glass Discharge Volume after 5 minute Backwash Rinse cycle mm m 2 mm m 3 /hr m 3 /hr kg kg m 3 SMD SMD SMD SMD SMD SMD SMD Model Connection Size A B C W R P E F K V H L X Y Z J S T SMD SMD SMD SMD SMD1600* SMD1800* SMD2000* *Please note, these measurements are for a valve orientation different to that shown in adjoining diagram 41

42 Commercial Filters WATERCO MICRON SIDE MOUNT DEEP BED SAND FILTERS - SMDD 2.5 Bar - Excludes MPV (2.5 Bar) L SMDD750 (2 /63mm connections, 200mm service hatch) L SMDD900 (3 /90mm connections, 200mm service hatch) L SMDD1050 (3 /90mm connections, 200mm service hatch) L SMDD1200 (3 /90mm connections, 420 x 320mm service hatch) L SMDD1400 (4 /110mm connections 420 x 320mm service hatch) L SMDD1600 (4 /110mm connections 420 x 320mm service hatch) L SMDD1800 (6 /160mm connections 420 x 320mm service hatch) L SMDD2000 (6 /160mm connections 420 x 320mm service hatch) L SMDD2350 (6 /160mm connections 420 x 320mm service hatch) 96 WATERCO MICRON SIDE MOUNT DEEP BED SAND FILTERS - SMDD 4.0 Bar - Excludes MPV (4.0 Bar) L SMDD750 (2 /63mm connections, 200mm service hatch) L SMDD900 (3 /90mm connections, 200mm service hatch) L SMDD1050 (3 /90mm connections, 200mm service hatch) L SMDD1200 (3 /90mm connections 420 x 320mm service hatch) L SMDD1400 (4 /110mm connections 420 x 320mm service hatch) L SMDD1600 (4 /110mm connections 420 x 320mm service hatch) L SMDD1800 (6 /160mm connections 420 x 320mm service hatch) L SMDD2000 (6 /160mm connections 420 x 320mm service hatch) L SMDD2350 (6 /160mm connections 420 x 320mm service hatch) 96 1, , , , , , , , P.O.A. 2, , , , , , , P.O.A. P.O.A. PLEASE NOTE: Also available in 6.0 Bar and 8.0 Bar versions, price and lead times available upon request. Lateral under drain system Filter Model Flange Size Flange Size Filter Area Bed Depth Maximum Flow Rating 30m 3 /hr/m 2 Maximum Flow Rating 40m 3 /hr/m 2 Sand ZeoPlus Glass Discharge Volume after 5 minute Backwash Rinse cycle m 3 mm m 2 mm m 3 /hr m 3 /hr kg kg SMDD SMDD SMDD SMDD SMDD SMDD SMDD SMDD SMDD SMDD Model Flange Size A B C K V H L X Z J S T SMDD mm SMDD mm SMDD mm SMDD mm SMDD mm SMDD mm SMDD mm 6.0 n/a SMDD mm 6.0 n/a SMDD mm 6.0 n/a SMDD mm 6.0 n/a

43 Commercial Filters Waterco Micron Nozzle Plate Sand Filters - SPDD 2.5 Bar SPDD (3 /90mm connections,200mm service hatch) SPDD (3 /90mm connections, 420 x 320mm service hatch) SPDD (4 /110mm connections 420 x 320mm service hatch) SPDD (4 /110mm connections 420 x 320mm service hatch) SPDD (6 /160mm connections 420 x 320mm service hatch) SPDD (6 /160mm connections 420 x 320mm service hatch) SPDD (6 /160mm connections 420 x 320mm service hatch) 96 5, , , , , , P.O.A. Micron SPDD filters are fitted with a plate and nozzle system, which ensures uniform flow for both filtering and backwashing, ensuring maximum performance through the media bed. The nozzle plate system also allows the introduction of pressurised air directly into the bottom of the filter media. Uniform introduction of air and water through the nozzle plate provides vigorous agitation and filter media bed expansion required for an effective air/water backwash leading to reduced backwashing times and reduced volumes of water. Save up to 25% of backwash water. PLEASE NOTE: Also available in 4.0 Bar, 6.0 Bar and 8.0 Bar versions, price and lead times available upon request. Conventional lateral configuration Nozzle plate configuration Nozzle Plate under drain system Internal Nozzle Plate Service Hatch Filter Model Flange Size mm Flange Size Filter Area m 2 Bed Depth mm Maximum Flow Rating 30m 3 /hr/m 2 m 3 /hr Maximum Flow Rating 40m 3 /hr/m 2 m 3 /hr Sand Kg Zeoplus Glass kg Discharge Volume after 5 minute Backwash Rinse Cycle m 3 SPDD SPDD SPDD SPDD SPDD SPDD SPDD Model Flange Size B C K V H L X Z J S T SPDD SPDD SPDD SPDD SPDD SPDD SPDD

44 Commercial Filters Micron Horizontal Filters The Micron Horizontal Filter is a space saving high performer; its compact horizontal design allows installation with minimum waste of space. The shape of the Micron Horizontal Filter is both attractive and functional. The spherical ends are designed to give uniform flow from both inlet and outlet collection assemblies. Micron Horizontal Filters are available with a 500mm (M) filter media bed and a 1200mm (MD) filter media bed. Sturdy service manhole. Inlet & Outlet ports located for ease of plumbing. Automatic air release. Looped distribution and lateral system. Fibreglass wound tank, UV and Corrosion Resistant. Large stable support skirt. Looped distribution and lateral system Waterco has introduced a looped lateral configuration for its entire range of commercial horizontal fibreglass filters. Conventional horizontal filter lateral systems consist of straight piping fitted with laterals along the length of the horizontal filter. A conventional lateral system results in uneven fluidisation of the filter media bed. The beginning of the lateral system experiences a strong flow of water, which gradually decreases along the length of the lateral piping. Backwash flow also decreases towards the end of each lateral, resulting in non-uniform lifting of the filter media bed. Conventional horizontal filter lateral configuration Waterco has vastly improved the hydraulic efficiency of its horizontal filter lateral system by looping its distributors and laterals. The new lateral configuration provides a more natural flow of water through the filter, ensures optimum water filtration and balanced fluidisation of the filter bed during backwashing. Its individual laterals are shortened while maintaining filter media bed coverage, reducing the friction head loss of each lateral, further improving the filter s hydraulic efficiency. Waterco s looped lateral system reduces backwash run times, saves water and produces a flatter more uniform filter media bed after backwashing. Looped lateral system - Top view Looped lateral system - Inside view 44

45 Commercial Filters WATERCO MICRON COMMERCIAL HORIZONTAL SAND FILTERS (2.5 Bar) M2500 (4 /110mm port connections) 2.50m² M3750 (4 /110mm port connections) 3.75m² M3750 (6 /160mm port connections) 3.75m² M5000 (6 /160mm port connections) 5.00m² 8, , , , Filter Model Overall Length mm Overall Height mm Overall Width mm Valve Size (mm/ ) Bed Depth (mm) Filter Area (m 2 ) Zeoplus Glass (kg) Sand 16/30 (kg) Max. flow 30m 3 /hr/m 2 (m 3 /hr) Max. flow 40m 3 /hr/m 2 (m 3 /hr) M / M / M / M / Model A C W R L E F G H M M M M WATERCO MICRON HORIZONTAL DEEP BED Bobbin wound FILTERS 1.2m bed depth (2.5 Bar) MD5500 (8 /200mm port connections) MD6500 (8 /200mm port connections) MD8000 (8 /200mm port connections) MD10000 (10 /260mm port connections) 16, , , , Filter Model Overall Length mm Overall Height mm Overall Width mm Flange Size (mm/ ) Bed Depth (mm) Filter Area (m 2 ) Zeoplus Glass (kg) Sand 16/30 (kg) Max. flow 30m 3 /hr/m 2 (m 3 /hr) Max. flow 40m 3 /hr/m 2 (m 3 /hr) MD / MD / MD / MD / * Flow rate is limited by the port size, max flow for 8 / 200mm is & 10 / 260mm is 654m 3 /hr. Model A C W R L E F G H M MD MD MD MD

46 Commercial Filters hydron split-tank filters HYDRON SPLIT FILTER Filter Only HYDRON SPLIT FILTER 1200h 3 FL LCN HYDRON SPLIT FILTER 1400h 4 FL LCN HYDRON SPLIT FILTER 1600h 4 FL LCN HYDRON SPLIT FILTER 1800h 6 FL LCN 70 8, , , , Designed for water treatment and commercial swimming pool facilities, built using the lasts in gel coated fibreglass technology. Durable Easy to maintain Flanged tank port connections Perfect for retrofit Easy transport Flexible configurations available Sight glass available Ideal for retrofitting Hydron Split tank can be delivered in two parts and assembled on site in the plant room. The two halves seal perfectly using a double o ring and are held together by a flange using bolts and nuts. The filter is specifically designed to fit through existing standard size plant room doors. Model No: Valve Bed Depth Inner Diameter Filter Area Filtration Flow Rates Backwash Flow Rates Sand Glass Size 30m 3 /hr/m 2 36m 3 /hr/m 2 40m 3 /hr/m 2 50m 3 /hr/m 2 Media in mm in mm in m 2 feet 2 m³/hr m³/hr kg kg SMDT SMDT SMDT SMDT Model A B C D E F G H SMDT SMDT SMDT SMDT

47 Commercial Filters LACRON SUREFLOW HZC - SAND FILTER 2.5 Bar pressure rating Filter Only HZC (110mm) Connections mm 6, complete with 2 fitted sight glasses Filter model Tank Diameter (mm) Bed Depth (mm) Filter Area (m 2 ) Valve Size (inch/mm) Pea Gravel (kg) Sand (kg) Zeoplus Glass (kg) Max. Flow (m 3 /hr) HZC / Model A B C D E F G H I J K L M N X HZC LACRON SUREFLOW LSC - SIDE MOUNT SAND FILTER Bar pressure rating Filter Tank with Connecting Unions Only LSC (63mm) Connections mm LSC (90mm) Connections mm LSC (90mm) Connections mm LSC (90mm) Connections mm 1, , , , Filter model Tank Diameter Bed Depth Filter Area Valve Size Pea Gravel Sand Zeoplus Glass (kg) Max. Flow (mm) (mm) (m 2 ) (mm/inch) (kg) (kg) (m 3 /hr) LSC / LSC / LSC / LSC / Model A B C D E F G H I J K L M N X LSC n/a n/a 500 LSC n/a n/a 550 LSC

48 Commercial Filters LACRON FINAFLOW MBF - MEDIUM BED SAND FILTER Bar pressure rating With Side Hatch, Sight Glass & Connecting Unions MBF ½ (50mm) Connections mm MBF (63mm) Connections mm 1, , Filter model Tank Diameter Bed Depth Filter Area Valve Size Pea Gravel Sand Zeoplus Glass (kg) Max. Flow (mm) (mm) (m 2 ) (mm / inch) (kg) (kg) (m 3 /hr) MBF / 1½ MBF / Model A B C D E F G H I J K L MBF MBF LACRON FINAFLOW DBF - DEEP BED SAND FILTER Bar pressure rating With Side Hatch, Sight Glass & Connecting Unions DBF ½ (50mm) Connections * mm DBF (63mm) Connections mm DBF (63mm) Connections mm DBF (90mm) Connections mm DBF (90mm) Connections mm TBA DBF (90mm) Connections mm * Side Hatch and Sight Glass not available on DBF-18 1, , , , , , Filter model Tank Diameter Bed Depth Filter Area Valve Size Pea Gravel Model A B C D E F G H I J X DBF DBF DBF DBF DBF DBF Sand Zeoplus Glass (kg) Max. Flow (mm) (mm) (m 2 ) (mm / inch) (kg) (kg) (m 3 /hr) DBF / 1½ DBF / DBF / DBF / DBF / DBF / LACRON FINAFLOW HPF - (HIGH PRESSURE) DEEP BED SAND FILTER 4.0 Bar Pressure rating With Connecting Unions HPF ½ (50mm) Connections mm HPF (63mm) Connections mm HPF (63mm) Connections mm HPF (90mm) Connections mm 1, , , , Filter model Tank Diameter Bed Depth Filter Area Valve Size Pea Gravel Model A B C D E F G H I J X HPF HPF HPF HPF Sand Zeoplus Glass (kg) Max. Flow (mm) (mm) (m 2 ) (mm / inch) (kg) (kg) (m 3 /hr) HPF / 1½ HPF / HPF / HPF /

49 Commercial Filters LACRON HI FLOW LCX - COMMERCIAL SAND FILTER 2.5 Bar pressure rating With Side Hatch, Sight Glass & PVC Laterals LCX (90mm) Connections mm LCX (110mm) Connections mm LCX (110mm) Connections mm LCX (160mm) Connections mm LCX (160mm) Connections mm LCX (160mm) Connections mm 5, , , , , P.O.A. Filter model Tank Diameter (mm) Bed Depth (mm) Filter Area (m 2 ) Valve Size (mm/inch) Pea Gravel (kg) Sand (kg) Max. flow (m 3 /hr) LCX / LCX / LCX / LCX / LCX / LCX / Model A B C D E F G H I J K X LCX LCX LCX LCX LCX LCX LACRON HI FLOW LCP - COMMERCIAL SAND FILTER 2.5 Bar pressure rating With Side Hatch, Sight Glass & Nozzle Plate LCP (90mm) Connections mm LCP (110mm) Connections mm LCP (110mm) Connections mm LCP (160mm) Connections mm LCP (160mm) Connections mm LCP (160mm) Connections mm 6, , , , , P.O.A Filter model Tank Diameter Bed Depth Filter Area Valve Size Pea Gravel Model A B C D E F G H I J K X LCP LCP LCP LCP LCP LCP Sand Zeoplus Glass (kg) Max. Flow (mm) (mm) (m 2 ) (mm/inch) (kg) (kg) (m 3 /hr) LCP / LCP / LCP / LCP / LCP / LCP /

50 Commercial Filters SINGLE FILTER 5 VALVE BATTERY SETS Valve Pipework Set - Self Assembly Valve Pipework Set - Self Assembly Valve Pipework Set - Self Assembly Valve Pipework Set - Self Assembly 90mm Valve Pipework Set - Self Assembly 110mm Valve Pipework Set - Self Assembly 160mm 1, , , , , , All 5 valve batteries come complete with butterfly valves, tees, elbows pipework and 2 pipe supports Note: Supplied loose in kit form. DOUBLE FILTER 5 VALVE BATTERY SETS 72859DF 5 Valve Pipework Set - Self Assembly DF 5 Valve Pipework Set - Self Assembly DF 5 Valve Pipework Set - Self Assembly DF 5 Valve Pipework Set - Self Assembly 90mm 72863DF 5 Valve Pipework Set - Self Assembly 110mm 72861DF 5 Valve Pipework Set - Self Assembly 160mm 2, , , , , , All double filter 5 valve Battery sets come complete with butterfly valves, tees, elbows, pipework and 3 pipe supports. Note: Supplied loose in kit form. 5 Valve Battery Double Filter 5 Valve Battery Single Filter 5 Valve Battery Mounted sight glass SPXSG300 Mounted sight glass 3 SPXSG400 Mounted sight glass 4 SPXSG600 Mounted sight glass 6 SPXSG90 Mounted sight glass 90mm SPXSG110 Mounted sight glass 110mm SPXSG160 Mounted sight glass 160mm

51 Commercial Filters Hydro Commercial Strainer Part No. Product Description Inlet / Outlet Price Hydro Commercial Strainer - Flanged 6 / Hydro Commercial Strainer - Flanged 4 / Hydro Commercial Strainer - Quick Connect/Flange 4 (110mm) / Clear polycarbonate strainer lid enables an instant view of the strainer basket. 603mm New lock ring with easy grip handles - no tools required for simple removal & replacement of the lid. Flanged / union connections 521.7mm Moulded 16L polypropylene basket. 520mm Hydro COMMERCIAL STRAINER FLANGE ASSEMBLY KITS Part No. Product Description Nominal Size Price ZZGP600FK 6 Flange Assembly Kit 6 ZZGP400FK 4 Flange Assembly Kit 4 ZZGP160FK 160mm Flange Assembly Kit 160mm ZZGP110FK 110mm Flange Assembly Kit 110mm Note: Flange Assembly Kits Include: 1 x Backing Ring, 1 x Stub Flange, 1 x Stub Gasket, 8 x bolts, 8 x Nuts and 16 x Washers PRESSURE GAUGE PANELS Part No. Product Description Price W22345 Dual Pressure Gauge WATERCO COMMERCIAL 4 Bar 6 WAY MULTIPORT VALVES All valves come complete with quick connect unions, pressure gauge & air relief valve. Side Mount ½ /75mm Side Mount MPV only 2½ /75mm ½ /75mm Side Mount MPV c/w plumbing kit 2½ /75mm /90mm Side Mount MPV only 3 /90mm /90mm Side Mount MPV c/w plumbing kit 3 /90mm /110mm Side Mount MPV only 4 /110mm

52 Commercial Filters Tee fitting PVC-U GP300ET 90 Tee - imperial 3 SPX090ET 90 Tee - metric 90mm GP400ET 90 Tee - imperial 4 SPX110ET 90 Tee - metric 110mm GP600ET 90 Tee - imperial 6 SPX160ET 90 Tee - metric 160mm Elbow fitting PVC-U GP Elbow - imperial 3 SPX Elbow - metric 90mm GP Elbow - imperial 4 SPX Elbow - metric 110mm GP Elbow - imperial 6 SPX Elbow - metric 160mm Elbow fitting PVC-U GP Elbow - imperial 3 SPX Elbow - metric 90mm GP Elbow - imperial 4 SPX Elbow - metric 110mm GP Elbow - imperial 6 SPX Elbow - metric 160mm Socket fitting PVC-U GP300PS Socket - imperial 3 SPX090SP Socket - metric 90mm GP400PS Socket - imperial 4 SPX110SP Socket - metric 110mm GP400PS Socket - imperial 6 SPX160SP Socket - metric 160mm Adaptor Socket fitting PVC-U GP300SA Adaptor Socket 3 x 90mm GP400SA Adaptor Socket 4 x 110mm GP600SA Adaptor Socket 6 x 160mm Cap fitting PVC-U GP300PC Cap - imperial 3 SPX090PC Cap - metric 90mm GP400PC Cap - imperial 4 SPX110PC Cap - metric 110mm GP600PC Cap - imperial 6 SPX160PC Cap - metric 160mm Plain socket x BSP Female thread fitting PVC-U GP300FA Socket - imperial 3 SPX090300FA Socket - metric 90mm X 3 GP400FA Socket - imperial 4 SPX110400FA Socket - metric 110mm X

53 Commercial Filters Union fitting PVC-U GP300SU Union - imperial 3 SPX090SU Union - metric 90mm GP400SU Union - imperial 4 SPX090SU Union - metric 110mm Stub Flange fitting PVC-U GP300SFO Stub Flange - imperial 3 SPX090SF Stub Flange - metric 90mm GP400SFO Stub Flange - imperial 4 SPX110SF Stub Flange - metric 110mm GP600SFO Stub Flange - imperial 6 SPX160SF Stub Flange - metric 160mm Reducing Bush fitting PVC-U GP300112RB Reducing Bush - imperial 3 X 1.5 GP300200RB Reducing Bush - imperial 3 x 2 GP300212RB Reducing Bush - imperial 3 x 2.5 SPX090075RB Reducing Bush - metric 90mm x 75mm GP400200RB Reducing Bush - imperial 4 x 2 GP400300RB Reducing Bush - imperial 4 x 3 SPX110090RB Reducing Bush - metric 110mm x 90mm GP600400RB Reducing Bush - imperial 6 X 4 SPX160140RB Reducing Bush - metric 160mm x 140mm Stub Gasket fitting PVC-U GP300SG Stub Gasket - imperial 3 SPX090SG Stub Gasket - metric 90mm GP400SG Stub Gasket - imperial 4 SPX110SG Stub Gasket - metric 110mm GP600SG Stub Gasket - imperial 6 SPX160SG Stub Gasket - metric 160mm Double union ball valve GP300BV Double Union Ball Valve - imperial 3 SPX090DBV Double Union Ball Valve - metric 90mm Fully Flanged Butterfly Valve Standard (with ratcheted handle) GP300FV Fully Flanged Butterfly Valve - imperial 3 SPX090BV Fully Flanged Butterfly Valve - metric 90mm GP400FV Fully Flanged Butterfly Valve - imperial 4 SPX110BV Fully Flanged Butterfly Valve - metric 110mm GP600FV Fully Flanged Butterfly Valve - imperial 6 SPX160BV Fully Flanged Butterfly Valve - metric 160mm PRESSURE PIPE GP300CP6 6m length pipe 3 SPX090PP5 5m length pipe 90mm GP400CP6 6m length pipe 4 SPX110PP5 5m length pipe 110mm GP600CP6 6m length pipe 6 SPX160PP5 5m length pipe 160mm

54 54 Waterco Media

55 Media 55 Waterco Media

56 Media Grade 1 equivalent to 16/30 Grade sand Waterco Glass Media 2264 Grade 1 (0.5mm -1mm) 25kg bag 2265 Grade 2 (1mm - 3mm) 25kg bag 2266 Grade 3 (3mm - 6mm) 25kg bag 2272 Grade 4 (1.0mm-2.0mm) 25kg bag 2270 Grade 5 (0.7mm-1.5mm) 25kg bag 2271 Grade 6 (0.2mm-0.5mm) 25kg bag 2273 Grade 7 ( mm) 25kg bag Grade 3 equivalent to 6mm gravel Waterco Glass media has the green credentials, and with its superior performance is also cost effective in comparison to sand. Save time, water and energy. Grade 1 0.5mm-1mm Grade 2 1mm-3mm Waterco Glass media has many benefits over sand: Waterco Glass media is more efficient It removes 30% more material and pollutants than sand, so saving on backwashing and the resultant water, energy and chemical treatment costs Waterco Glass media keeps cleaner It is less susceptible to bio-fouling. As the product is heat treated surfaces are smooth, so requiring less remedial action and again less chemical treatment to kill pollutants Waterco Glass media requires less material It is less dense than sand, requiring 20% less media to fill the equivalent filter Waterco Glass media doesn t degrade It therefore has a longer life span Waterco Glass media Is suitable for both commercial and domestic applications Other sizes available: mm, mm, mm, mm, mm, mm, mm Grade 3 3mm-6mm ZEOCLERE 2261C Zeoclere media 20kg Bag Zeoclere filter media produces a water clarity 60% better than that of conventional sand. It s ideally suited for private, commercial and hydrotherapy pools & spas and helps reduce filter maintenance and water consumption. Save time, water and energy. Reduce Ammonia Soften Water Reduce Iron Elevate the ph of Mildly Acidic Water - Reduces the odour of chloramines commonly associated with chlorinated water. - Reduces formation of scale on hot water system. - Reduces staining of sanitary wares and clothing. - Reduces the formation of rust in iron pipes. 56

57 Glass pearls Media Waterco Glass PEARLS Media Grade 1 Glass Pearls Media 0.6mm - 0.8mm 20Kg Manufactured from 100% virgin glass, Waterco glass pearls are a new generation of filter media, capable of providing water of superior clarity and requiring less water for backwashing. Save time, water and energy. Superior Clarity Grade 1 Glass Pearls have a small effective size of only 0.6mm to 0.8mm. Its narrow particle size range allows in-depth filtration and extends operating cycles between backwashing. Glass Pearls have been laboratory tested to be able to effectively filter down to below 3 microns. Safe and Smooth Glass Pearls are spherical and do not have any sharp edges. They are safe to handle and safe to service. If there is ever a failure of the filter s laterals and glass beads flow into the swimming pool, they pose no risk of injury to swimmers. High Purity Waterco Glass Pearls are manufactured from 100% virgin glass and chemically inert. Waterco Glass Pearls have been independently lab tested for leeching contaminants and found to be well within Australian Drinking Water Guidelines. Save Water Glass Pearl s spherical smooth shape, results in a low co efficient of friction, reducing its backwash water requirements. Glass Pearls backwashes with up to 20% less water than sand, saving time and water. Time Saving Glass Pearls are easy to install and enables a rapid start up of the media filter. Its high purity means very little backwashing is required to cleanse the filter media, prior to commissioning the filter. Technical Specifications Filtration Media Glass Pearl Backwash rate 16m³/m/m² Effective Size (mm) 0.61 Uniformity Coefficient 1.21 Bulk Density 1.61 Mohs Hardness 7.0 Chemical Compositions Silicon dioxide (SiO2) % Sodium oxice (Na2O) % Calcium oxide (CaO) % Magnesium oxide (MgO) approx % Aluminium (AL2O3) approx % Potassium oxide (K2O) approx- 1.50% 57

58 58 Waterco Pumps

59 Pumps Waterco Pumps

60 Pumps SECONDARY SEAL PUMPS Secondary Protection Seal Situated between the pump wet end and the pump motor, a mechanical seal forms a seal around the motor shaft to prevent water from running out along the shaft of the motor. The mechanical seal is the wearing part of any pool pump, if the pump is ever run dry or simply worn out. If a leaking mechanical seal is not replaced promptly, water will travel up the shaft of the motor and ruin the motor in a very short period of time. Waterco s patented Secondary Seal technology protects the pump motor s end shield from any water contact, by capturing any leaks through a worn out mechanical seal and draining it out of the pump. 60

61 Pumps WATERCO AQUAMITE PUMPS - Single Phase 220v - 240v, S/S shaft, CE approved Part No. Product Description Q. Max P. Max Price 1½ port supplied with 1½ imperial & 50mm metric quick connect unions. Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal AEUM Aquamite m³/hr 0.53kW AEUM Aquamite m³/hr 0.58kW AEUM Aquamite m³/hr 0.65kW AEUM Aquamite m³/hr 0.76kW AEUM Aquamite m³/hr 0.88kW Price and availability for TUV approved models available on request Silicon carbide seal required for salt water installations, pricing available on request Flow Curve 66 Noise Curve Aquamite Sound Levels Head (m) Noise(dBA) Aquamite 100 Aquamite Aquamite 50 Aquamite 75 Aquamite Flow (m3/hr) Flow Rate (m 3/hr) Specifications Model HP Pmax Amps Phase Total Motor Flow Rate kw Length Frame Qmax m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr Phase Volts Cycle RPM The Aquamite is a compact pump ideal for domestic swimming pools and small recirculation systems including ponds and water features. Secondary Protection Seal 61

62 Pumps WATERCO LACRONITE PUMPS Single phase 220v 240v, S/S shaft, CE approved Part No. Product Description Q. Max P. Max Price 1½ port supplied with 1½ imperial & 50mm metric quick connect unions and internal threaded connections. Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal Lacronite 0.5HP 0.61kW Lacronite 0.75HP 0.78kW Lacronite 1HP 0.96kW Lacronite 1.25HP 1.10kW Lacronite 1.5HP 1.50kW Price and availability for TUV approved models available on request Silicon Carbide seal required for salt water applications, pricing available on request The Lacronite pump is ideal for large domestic swimming pools with ancillary systems such as heating, in-floor cleaning, fountains, vacuum cleaning and swim jets. Flow Curve Noise Curve Total Head (m) Noise Level db Flow (m 3 /hr) Flow (m 3 /hr) Direct replacement for the STARITE 5P2R and the Hayward Super Pump NO alteration of plumbing required Model Flow rate m³/hr 8m 10m Nominal Power (hp) Motor input (kw) Amps Total Length (mm) Total Width (mm) Total High Lacronite Lacronite Lacronite Lacronite Lacronite (mm) Phase Volts Cycle RPM " BSPT INTERNAL THREADS AVAILABLE (BOTH PORTS) 228 * Total Length 62

63 Pumps ECO-Vs WATERCO LACRONITE ECO V PUMPS Single phase 220v 240v, S/S shaft, CE approved Part No. Product Description Q. Max P. Max Price 1½ port supplied with 1½ imperial & 50mm metric quick connect unions and internal threaded connections. Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal Lacronite ECO VS 1HP 0.96kW Lacronite ECO VS 1.5HP 0.96kW Price and availability for TUV approved models available on request Silicon Carbide seal required for salt water applications, pricing available on request. 1, , The Lacronite ECO V pump is ideal for large domestic swimming pools with ancillary systems such as heating, in-floor cleaning, fountains, vacuum cleaning and swim jets. Flow Curve Noise Curve High Total He ead (m) Sound Pressure Level (dba) Low Medium 2 0 MED HIGH ECO V ECO Flow (m 3 /hr) Flow (m 3 /hr) Direct replacement for the STARITE 5P2R and the Hayward Super Pump NO alteration of plumbing required Model Flow rate m³/hr 8m 10m Nominal Power Phase Volts Cycle RPM (Low) 2410 (Medium) 2850 (High) (hp) Motor input (kw) Amps Total Length (mm) Total Width (mm) Total High Lacronite 100ECO Lacronite 150ECO (mm) 689 Save time, water and energy

64 Pumps The Supatuf is ideal for large domestic swimming pools with ancillary systems. WATERCO SUPATUF PUMPS - Single Phase 220v - 240v, S/S shaft, TÜV approved Part No. Product Description Q. Max P. Max Price 2 port supplied with 2 imperial & 63mm metric quick connect unions Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal EUM Supatuf m³/hr 0.54kW EUM Supatuf m³/hr 0.63kW EUM Supatuf m³/hr 0.84kW EUM Supatuf m³/hr 0.96kW EUM Supatuf m³/hr 1.15kW EUM Supatuf m³/hr 1.50kW EUM Supatuf m³/hr 1.81kW EUM Supatuf m³/hr 2.06kW WATERCO SUPATUF PUMPS - Three Phase 380v - 415v, S/S shaft, TÜV approved Part No. Product Description Q. Max P. Max Price 2 port supplied with 2 imperial & 63mm metric quick connect unions Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal EUM Supatuf m³/hr 0.49kW EUM Supatuf m³/hr 0.60kW EUM Supatuf m³/hr 0.86kW EUM Supatuf m³/hr 1.01kW EUM Supatuf m³/hr 1.09kW EUM Supatuf m³/hr 1.43kW EUM Supatuf m³/hr 1.73kW EUM Supatuf m³/hr 1.99kW Flow Curve Noise Curve Total Head (m) Sound Pressure Level (dba) Flow (m3/hr) Flow (m 3 /hr) Secondary Protection Seal Model HP Pmax kw Amps Phase Total Length Motor Frame Flow Rate Qmax m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr Phase Volts Cycle RPM

65 Pumps WATERCO SUPATUF ECO VS PUMPS - Single Phase 220v - 240v, S/S shaft, TÜV approved Part No. Product Description Q. Max P. Max Price 2 port supplied with 2 imperial & 63mm metric quick connect unions Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal EUM Supatuf Eco VS m³/hr 0.84kW EUM Supatuf Eco VS m³/hr 1.03kW 1, , Supatuf ECO s 3 speed options cater for most pool functions. High speed - Vacuuming and backwash, 1% of the time. Medium speed - Automatic pool cleaners. Low speed Filtration, 99% of the time As a pool s filtration cycle occupies 99% of the run time of a pool pump, you can operate the Supatuf ECO on its low speed setting for a majority of its running time, leading to significant energy savings. Equipped with an energy saving variable speed motor, Supatuf ECO VS is capable of lowering its energy usage, reducing its energy usage and reducing its operating noise levels. Innovative permanent magnet brushless DC motor Ultra quiet operation 2 / 63mm quick connect unions Flow Curve Noise Curve Total Head (m) H 2 100M Flow (m 3 /hr) Total Head (m) H M Flow (m 3 /hr) Model HP Pmax kw Amps Total Length imput EUM EUM Phase Volts Cycle RPM (Low) 2410 (Medium) 2850 (High) Secondary Save time, water and energy. Protection Seal 65

66 Pumps Supastream pumps are general purpose units designed for use in swimming pools and low pressure water recirculation applications. WATERCO SUPASTREAM PUMPS - Single Phase 220v - 240v, S/S shaft, CE approved Part No. Product Description Q. Max P. Max Price 1½ port supplied with 1½ imperial & 50mm metric quick connect unions. Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal EUM Supastream m³/hr 0.57kW EUM Supastream m³/hr 0.61kW EUM Supastream m³/hr 0.82kW EUM Supastream m³/hr 0.88kW EUM Supastream m³/hr 1.09kW Price and availability for TUV approved models available on request All models also available with 2 /63mm ports - pricing and availability on request. WATERCO SUPASTREAM PUMPS - Three Phase 380v - 415v, S/S shaft, CE approved Part No. Product Description Q. Max P. Max Price 1½ port supplied with 1½ imperial & 50mm metric quick connect unions. Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal EUM Supastream m³/hr 0.59kW EUM Supastream m³/hr 0.59kW EUM Supastream m³/hr 0.82kW EUM Supastream m³/hr 0.83kW EUM Supastream m³/hr 1.09kW Price and availability for TUV approved models available on request All models also available with 2 /63mm ports - pricing and availability on request Flow Curve Noise Curve Head (m) 8 Noise( dba) Supastream 100 Supastream 125 Supastream Supastream 75 Supastream Flow Rate (m3/hr) Flow Rate (m 3 /hr) TOTAL LENGTH Model HP Pmax Amps Phase Total Motor Flow Rate kw Length Frame Qmax m 3 /hr m 3 /hr m 3 /hr m 3 /hr & m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr Phase Volts Cycle RPM Secondary Protection Seal 66

67 Pumps WATERCO TURBOFLO PUMPS - Single Phase 220v - 240v, Three phase 380v - 415v, S/S shaft, CE approved Part No. Product Description Q. Max P. Max Price 2 port supplied with 2 and 63mm quick connect unions. Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal EUM TurboFlo m³/hr 0.94kW EUM TurboFlo m³/hr 1.05kW EUM TurboFlo m³/hr 1.40kW EUM TurboFlo m³/hr 1.50kW EUM TurboFlo m³/hr 1.70kW EUM TurboFlo m³/hr 2.11kW EUM TurboFlo 400 (three phase) 45.36m³/hr 3.10kW TurboFlo is a hydraulically efficient, high performance pump designed for pools and spas with high power requirements. It has an adjustable wet end which can be configured to suit up to 5 different plumbing conditions. Flow Curves Adjustable wet end The outlet port of the TurboFlo can be configured to suit different plumbing conditions. Multiple port configurations (5 different positions available) Head (m) Noise Curve Flow (m³/hr) Specifications Model Nominal Motor Total Length Motor Frame Amps Power (hp) Input (kw) (mm) (mm) Inlet/Outlet TurboFlo /63mm TurboFlo /63mm TurboFlo /63mm TurboFlo /63mm TurboFlo /63mm TurboFlo /63mm TurboFlo /63mm Dimensions Phase Volts Cycle RPM TOTAL LENGTH FRAME 309 Noise (db) Flow Rate (m 3/hr) ÿ

68 Pumps WATERCO Hydrostorm ECO PUMPS - Single Phase 220v - 240v, S/S shaft, TÜV approved Part No. Product Description Price 2 port supplied with 2 imperial & 63mm metric quick connect unions Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal EUM Hydrostorm ECO speed 1, Price and availability for (2 1 / 2 / 75mm ports) TÜV approved models available on request Saving Energy Conventional pool pumps are limited to one set speed. A pool pump is usually sized to cater for the pool s maximum water flow requirements, which may either be the sand filter s backwash water flow or to provide sufficient water flow to operate a suction cleaner. As the speed of a conventional pump cannot be changed, the same maximum water flow is applied across the pool s various requirements. Equipped with the very latest 3 speed permanent magnet brushless DC motor, Hydrostorm ECO is capable of lowering its motor speed, reducing water flow and lowering its energy consumption. Low speed (1900rpm) Medium speed (2410rpm) High speed (2850rpm) Head (m) Flow Curve Flow (m 3 /h) Noise Level (dba) Noise Level Flow (m 3 /h) Save time, water and energy. 3 Speed Options Hydrostorm ECO s 3 speed options cater for most pool functions. High speed - Vacuuming and backwash 1% of the time Medium speed - Automatic pool cleaners Low speed - Filtration 99% of the time Pool filtration does not require to be operated at a pump s maximum water flow rate. In fact, your pool s filtration efficiency improves at lower flow rates. As a pool s filtration cycle occupies 99% of the run time of a pool pump, you can operate the Hydrostorm ECO on its low speed setting for a majority of its running time, leading to significant energy savings. Hydrostorm ECO can slash its energy use by up to 67% by operating it at low speed Specifications Length (mm) Height (mm) Width (mm) Packaged Weight (kg) Medium speed (2410rpm) Pump Total Head (m) Flow Rate (m 3 /h) Motor Input (kw) Amps Noise Level (dba) Low speed (1900rpm) Pump Total Head (m) Flow Rate (m 3 /h) Motor Input (kw) Amps Noise Level (dba) High speed (2850rpm) Pump Total Head (m) Flow Rate (m 3 /h) Motor Input (kw) Amps Noise Level (dba)

69 Pumps The Hydrostorm is designed to have all the extra power you need to cope with modern day swimming pool designs. WATERCO HYDROSTORM PUMPS HIGH HEAD - Single Phase 220v - 240v, S/S shaft, TÜV approved Part No. Product Description Q. Max P. Max Price 2 port supplied with 2 imperial & 63mm metric quick connect unions. Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal EUM Hydrostorm m³/hr 0.88kW EUM Hydrostorm m³/hr 0.97kW EUM Hydrostorm m³/hr 1.28kW EUM Hydrostorm m³/hr 1.41kW EUM Hydrostorm m³/hr 1.90kW EUM Hydrostorm m³/hr 2.24kW WATERCO HYDROSTORM PUMPS HIGH HEAD - Three Phase 380v - 415v, S/S shaft, TÜV approved Part No. Product Description Q. Max P. Max Price 2 port supplied with 2 imperial & 63mm metric quick connect unions. Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal EUM Hydrostorm m³/hr 0.91kW EUM Hydrostorm m³/hr 1.08kW EUM Hydrostorm m³/hr 1.33kW EUM Hydrostorm m³/hr 1.45kW EUM Hydrostorm m³/hr 1.90kW EUM Hydrostorm m³/hr 2.24kW Price and availability for TÜV approved models available on request Flow Curve Noise Level Total Head (m) / 3 phase / 3 phase 250 / 3 phase Flow (m 3 /hr) Sound Pressure Level (dba) Flow (m 3 /hr) / triphasé 250 / triphasé 350 / triphasé Model HP Pmax KW Amps Phase Total Motor Flow Rate Length Frame Qmax EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr Phase Volts Cycle RPM

70 Pumps WATERCO HYDROSTORM PLUS PUMPS HIGH HEAD - Single Phase, S/S shaft, TÜV approved Part No. Product Description Q. Max P. Max Price 2 port supplied with 2 imperial & 63mm metric quick connect unions. Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal EUM Hydrostorm Plus m³/hr 0.98kW EUM Hydrostorm Plus m³/hr 1.40kW EUM Hydrostorm Plus m³/hr 1.51kW EUM Hydrostorm Plus m³/hr 1.85kW EUM Hydrostorm Plus 300 (2½ connections) 34.32m³/hr 1.87kW The Hyrdostorm Plus has all the proven features of the Hydrostorm with the added benefit of an innovative lid and lock ring for easier maintenance and a larger capacity strainer basket for increased capacity. WATERCO HYDROSTORM PLUS PUMPS HIGH HEAD -Three Phase, S/S shaft, TÜV approved Part No. Product Description Q. Max P. Max Price 2½ port supplied with tail piece to suit 63mm or 75mm pipe connections EUM Hydrostorm Plus m³/hr 1.39kW EUM Hydrostorm Plus m³/hr 1.46kW EUM Hydrostorm Plus m³/hr 1.87kW EUM Hydrostorm Plus m³/hr 2.08kW EUM Hydrostorm Plus m³/hr 2.66kW Flow Curve Noise Level Total Head (m) / 3 phase Flow (m 3 /hr) Sound Pressure Level (dba) / 3 phase Flow (m 3 /hr) Model HP Pmax kw Amps/ Phase Phase Total Length Motor Frame Flow Rate Qmax EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr EUM m³/hr Phase Volts Cycle RPM

71 Pumps The Hydrotuf is ideal for large domestic pools with ancillary systems such as heating, infloor cleaning, vacuum cleaning, fountains and swim jets. WATERCO HydroTuf PUMPS - Single Phase 220v - 240v, S/S shaft, TÜV approved Part No. Product Description Price 2 port supplied with 2 imperial & 63mm metric quick connect unions Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal EUM Hydrotuf EUM Hydrotuf EUM Hydrotuf EUM Hydrotuf EUM Hydrotuf EUM Hydrotuf EUM Hydrotuf 300 Price and availability for (2 1 / 2 / 75mm ports) TÜV approved models available on request WATERCO HydroTuf PUMPS - Three Phase 380v - 415v, S/S shaft, TÜV approved Part No. Product Description Price 2 port supplied with 2 imperial & 63mm metric quick connect unions Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal EUM Hydrotuf EUM Hydrotuf EUM Hydrotuf EUM Hydrotuf EUM Hydrotuf 300 Price and availability for TÜV (2 1 / 2 ports) approved models available on request Flow Curve Noise Level Total Head (m) Flow (m 3 /hr) Sound Pressure Level (dba) Flow (m 3 /hr) TOTAL_LENGTH Model HP Pmax kw Amps Phase Total Length Motor Frame Flow Rate Qmax EUM m 3 /hr EUM m 3 /hr EUM m 3 /hr EUM m 3 /hr EUM m 3 /hr EUM m 3 /hr EUM m 3 /hr EUM m 3 /hr EUM m 3 /hr EUM m 3 /hr EUM m 3 /hr EUM m 3 /hr EUM m 3 /hr EUM m 3 /hr Phase Volts Cycle RPM

72 Commercial Pumps WATERCO HYDROSTAR MK3 PUMPS - HIGH HEAD Part No. Product Description Q. Max P. Max Price 3 port supplied with 3 imperial & 90mm Metric quick connect unions EUM Hydrostar 300 single phase 36.3m³/hr 2.33kW EUM Hydrostar 300 MKIII 36.3m³/hr 2.25kW EUM Hydrostar 400 MKIII 61.0m³/hr 2.92kW EUM Hydrostar 500 MKIII 68.0m³/hr 3.16kW EUM Hydrostar 600 MKIII 76.0m³/hr 4.36kW EUM Hydrostar 700 MKIII 77.0m³/hr 5.18kW , , , Flow Curve Noise Level Head (m) Hydrostar 300 Hydrostar 700 MK3 new basket Noise (db) Hydrostar 400 MK3 new basket Hydrostar 500 MK3 new basket Hydrostar 600 MK3 new basket Flow (m3/hr) Flow (m³/h) The Hydrostar MKIII has been redesigned to provide a substantially quieter operation with even higher flow rates and higher head than the previous Hydrostar models. Waterco has improved the hydraulic efficiency of the pump with the introduction of an internal volute. The volute s hydraulic design provides a natural balanced water flow and reduces hydraulic turbulence. Model Nom. HP kw Hmax Pmax Qmax Amps/ Phase Phase Total Length Motor Frame (m) (kw) (m 3 /hr) EUM Phase Volts Cycle RPM ø

73 Commercial Pumps WATERCO HYDROSTAR PLUS - Three Phase 380v - 445v Part No. Product Description Q. Max P. Max Price Hydrostar Plus 5.5kW / 7.5HP m3/hr 6.2kW Hydrostar Plus 7.5kW / 10HP m3/hr 8.5kW 1, , Flow Curve Purposed built for aquatic facilities, water parks and large commercial swimming pools. Hydrostar Plus pumps are high performance corrosion resistant thermoplastic pumps. Head (m) QH Hydrostar Plus HP 10HP Flow (lpm) 10HP 7.5HP Model Nom. HP kw Pmax Qmax Amps/ Phase Total Length Motor Frame (kw) (m 3 /hr) 7.5kW kW Phase Volts Cycle RPM

74 Commercial Pumps WATERCO BH5000 CAST IRON PUMPS - BRONZE IMPELLOR - Three Phase 380v - 415v Part No. Product Description Q. Max P. Max Price C.I. 4.0kW 6 suction port and 4 discharge 79.0m³/hr 4.4kW C.I. 5.5kW 6 suction port and 4 discharge 100.0m³/hr 6.0kW C.I. 7.5kW 6 suction port and 4 discharge 124.0m³/hr 8.3kW C.I. 9.5kW 6 suction port and 4 discharge 136.0m³/hr 10.0kW C.I. 11.0kW 6 suction port and 4 discharge 142.0m³/hr 11.3kW 1, , , , , Flow Curve 85 Noise Level kw The BH5000 features a hydraulically efficient bronze impeller which allows for quiet operation and excellent flow. Constructed with a composite wet end and clear lid which allows easy inspection of the 18 litre capacity polypropylene strainer Head (m) kw kw 5.5 kw 7.5 kw 4 kw Flow Rate (m3/hr) Noise (db) kw 5.5 kw 7.5 kw Flow (m³/h) C.I. Pump Model Hmax (m) Pmax (kw) Qmax (m 3 /hr) Phases Current (A/phase) 4kW kW kW kW kW Phase Volts Cycle RPM Code No. Kw / HP A (EMG) / / / / / WATERCO BH5000 FLANGE ASSEMBLY KITS Part No. Product Description Nominal Size Price ZZGP600FK 6 Flange Assembly Kit 6 ZZGP400FKAS 4 Flange Assembly Kit ANSI 4 ZZGP160FK 160mm Flange Assembly Kit 160mm ZZGP110FKAS 110mm Flange Assembly Kit ANSI 110mm Note: Flange Assembly Kits Include: 1 x Backing Ring, 1 x Stub Flange, 1 x Stub Gasket, 8 x bolts, 8 x Nuts and 16 x Washers 74

75 Pumps Pool Water Recirculation Waterco Pool Water Recirculation

76 Pool Water Recirculation SUPASKIMMERS Part No. Product Description Price Supaskimmer (Concrete) Supaskimmer (F/glasswith screw lugs) Supaskimmer Widemouth (Concrete) Commercial Supaskimmer (Glass reinforced lid) Supaskimmer Widemouth Specifications Model Max. Surface Area Suction Pipe (inch) Opening (mm) Basket Capacity (litres) Total Height (mm) Total Depth (mm) Unit Weight (kg) Supaskimmer 75 m 2 2 x 2 247x Supaskimmer Widemouth 75 m 2 2 x 2 551x Supaskimmer Widemouth ø Supaskimmer ø315 Supaskimmer The Supaskimmer is a large capacity skimmer box which is ideal for use in large domestic, semi commercial and commercial swimming pools. Because of its large capacity 5.9 litre debris collection it is also ideal for any swimming pool that is constructed in leafy environments. Lock down leaf basket and vacuum plate - holds the leaf basket and vacuum plate firm. Large capacity basket 5.9 litres, over double the size of conventional skimmers. 2 x 2 bottom suction ports less water flow restrictions. 2 x 1 1 /2 side ports ideal for wall mount cleaners. New child resistant safety lid prevents child accidents. Deeper body style less chance of running pumping equipment dry. Built in overflow drain port to assist the prevention of flooding, during heavy rain Supaskimmer

77 Pool Water Recirculation S75 SKIMMERS Part No. Product Description Price Skimmer Box S75C MK2 (Concrete) Skimmer Box S75F MK2 (F/glass) Specifications S75 Skimmer Box The S75 skimmer is a general purpose skimmer which can be used in concrete, fibreglass and above ground pool installations. It has a built in overflow drain port to assist the prevention of flooding, during periods of heavy rain. A horizontal 2 suction take-off reduces the suction lift demands on the pump, saving energy. Model Max. Surface Area Suction Pipe (inch) Opening (mm) Basket Capacity (litres) Total Height (mm) Total Depth (mm) Unit Weight (kg) S75 75 m x Dimension Lock down leaf basket and vacuum plate - holds the leaf basket and vacuum plate firm Child safety lid lock down system prevents child accidents Square and round deck lid configuration SP5000 SKIMMERS Part No. Product Description Price ASM002 Paramount SP5000 (Concrete) ASM004 Paramount SP5000 (F/glass) Specifications Model Max. Surface Area Suction Pipe (inch) Opening (mm) Basket Capacity (litres) Total Height (mm) Total Depth (mm) Unit Weight (kg) SP m x Dimension SP5000 Skimmer The SP5000 skimmer is a general purpose skimmer which can be used in concrete, fibreglass and above ground pool installations. The SP5000 is sized to minimise excavation and reduce concrete and steel requirements, whilst maintaining an optimum skimming action. A horizontal 2 suction take-off reduces the suction lift demands on the pump, saving energy Ø271 77

78 Pool Water Recirculation SKIMMER LINTEL Part No. Product Description Price Skimmer Lintel Waterco s Skimmer Lintels are manufactured in ABS plastics and are designed to become an integral part of Waterco s Skimmer Box in a concrete installation. The lintel will structurally support the installation of all types of pool pavers across the skimmer box opening. SKIMMER BOX EXTENSION RING Part No. Product Description Price Skimmer Extension Ring S Supaskimmer Dress Ring SQ T/Lock S/S - in sandstone colour S Supaskimmer Dress Ring - round - sandstone Skimmer Supaskimmer Face Plate SK101 - in white colour Skimmer Supaslimmer Escutcheon Clip - in white colour Supaskimmer wide mouth escutcheon kit If the skimmer is to be installed so that the deck lid will not be secured to the skimmer body, Waterco recommends using a skimmer Extension Ring (624105) for trouble free installation. The Extension Ring sits snugly in between the skimmer body and the Deck Ring and is strong enough to hold its shape during concreting. Using the Extension Ring will prevent misalignment of the Deck Ring and the skimmer body. Eliminate problems caused by concrete intruding into the skimmer box cavity. Ensure there are no obstructions to removing and replacing vacuum plates. Extension rings can be piggybacked to provide extensions in multiples of 60mm 78

79 Pool Water Recirculation AUTOMATIC WATER LEVELLER Part No. Product Description Price Auto Water Leveller MK Waterco s Automatic Water Leveller adds to the leisure time of the pool owner by eliminating the need to keep an eye on the water level. Fully automatic operation Overflow connection Child resistant lock down lid assembly. Simple servicing and connection By maintaining the correct water level, the Automatic Water Leveller eliminates the risk of an expensive pump failure brought about by starvation of water through evaporation or leakage. Dress ring and lid 298mm POOL WATER LEVEL 70mm INSIDE 176mm -100mm 246mm 265mm POOL WALL 1½/50mm UPVC UPVC pipe from overflow to drain The Automatic Water Leveller is placed in the ground at a convenient location near the pool and plumbed to a separate pool inlet and also to the fresh water supply. The leveller remains inactive until the pool water level drops below or rises above the correct point at which time it will restore the right level by adding or draining water as the situation requires. 79

80 Pool Water Recirculation WATERCO FLUSH DECK GRATING Part No. Product Description Price Flush Deck Grating (301mm wide) (41 per metre per metre) Flush Deck Grating (250mm wide) (41 per metre per metre) Floor Inlet - Adjustable (40mm x 50mm) WATERCO MAIN DRAINS Part No. Product Description Price Waterco Main Drain - white c/w valve and stem Waterco Main Drain - beige c/w valve and stem comprises:- Body Hydrostatic Valve Main Drain Stem Cover & Dress Ring (white) OR Cover & Dress Ring (beige) Grease Plate Hydrovalve Ø Main Drain Body Ø Ø WATERCO HYDROSTATIC VALVE Part No. Product Description Price Main Drain Hydrostatic Valve

81 Pool Water Recirculation Lights Waterco Lights

82 Underwater Lights WATERCO BRITESTREAM LED NICHE LIGHT BriteStream LED Niche Light - white 12m BriteStream Blue LED Niche Light 12m BriteStream Multicoloured LED Niche Light 12m BriteStream LED Niche Light - white 20m BriteStream Blue LED Niche Light 20m BriteStream Multicoloured LED Niche Light 20m BriteStream LED Niche replacement kit - white 1m BriteStream Blue LED Niche replacement kit 1m BriteStream Multicoloured LED Niche replacement kit 1m Stainless Steel Dress Ring (for niche mounted light only) Wet niche assembly - black Britestream LED Niche Light is a flush mounted light which protrudes only 11mm from the pool/spa wall. Its energy efficient super bright LEDs are capable of delivering 352 lumens of light* and operate on only 15 watts of energy. Projects ONLY 9mm into the pool or spa Super bright LED s capable of delivering 352 lumens (White LED) Polycarbonate construction Life span of over hours 180 illumination Uniform diffusion of light Operates on only 15% of the electrical power of a halogen light Specifications Light Output Zonal Distribution Power Usage Input Voltage LED Life 352 lumens 0 to 180 degrees 15Watt 12V AC 70,000 hours Energy saving operates on 15% of the energy of a halogen pool light Long life LED life span of over 70,000 hours Multicoloured LED light capable of producing a multitude of different colours without the need for coloured lenses. Optional Stainless Steel Rim * Britestream White LEDs deliver 352 lumens of light. Easy Coiling Extra space for easy coiling and storage of the light s power cord Energy Saving BriteStream LEDs operate on only 15 watts of energy, which is approximately 15% of the electrical power usage of a halogen light. Triple seal connection Three O -rings are in place to provide a triple seal eliminating the possibility of any leakages travelling up the power cord. Extra Slim Protrusion Precision Built BriteStream comprises of a precision built printed circuit board totally enclosed in a waterproof housing. Super Bright Super bright energy saving LEDs capable of delivering 352 lumens of light. [White LED light] Long Life BriteStream LED has a life span of over hours, which is equivalent to over 30 years of illumination. (Based on 6 hours usage per day). Built-in Heat Management The LED heat output is automatically managed by its electronic circuitry. Specifications Zonal Distribution Power Usage Input Voltage LED Life 0 to 180 degrees 15 Watt 12V AC 70,000 hours SWITCH SEQ NO COLOURS & MODES SELECTION Dimensions (mm) 1 WHITE SLOW CHANGING COLOURS 2-20 SECOND RAMPING FAST CHANGING COLOURS 3-5 SECOND RAMPING 4 BLUE 5 MAGENTA 6 RED Optional Stainless Steel Rim Warranty BriteStream LED lights are covered by a comprehensive 12 month warranty YELLOW - GREEN (GOLD) 8 GREEN 222 Ø166.4 Save time, water and energy. 9 AQUA 82

83 Underwater Lights WATERCO BRITESTREAM LED NICHE CONVERSION KITS Niche Mounting Ring Certikin Replacement 165mm Niche Mounting Ring Hayward Replacement 165mm Niche Adaptor Ring Pentair Replacement 165mm Certikin Hayward Pentair Waterco conversion kits allow the Britestream LED Niche Mounted light to be installed in either a Certikin, Hayward or Pentair Niche that is already installed in the pool wall. Waterco Niche mounted LED replacement kits to be used in conjunction with Certikin, Hayward or Pentair Conversion Kits The Britestream Multicoloured LED light is cleverly designed with a built in colour memory, which means the light s multicoloured LEDs always defaults to its last colour selection. Nine different colour programs are available: SWITCH SEQ NO COLOURS & MODES SELECTION 1 WHITE 2 3 SLOW CHANGING COLOURS - 20 SECOND RAMPING FAST CHANGING COLOURS - 5 SECOND RAMPING 4 BLUE 5 MAGENTA 6 RED 7 YELLOW - GREEN (GOLD) 8 GREEN 9 AQUA 83

84 Underwater Lights Britestream LED Light utillises energy efficient super bright LEDs that are capable of delivering 352 lumens of light* and operate on only 15 watts of energy. Energy saving - operates on 15% of the electrical power of a halogen light Long life span of over 70,000 hours Multicoloured LED light capable of producing a multitude of different colours without the need for coloured lens. Universal light adaptor and easy to use retrofit connector **Britestream White LEDs deliver 352 lumens of light. Dimensions (mm) WATERCO BRITESTREAM LED LIGHT - SURFACE MOUNTED Britestream LED Light white 2m Britestream Blue LED Light 2m Britestream Multicoloured LED Light 2m Britestream LED Light white 12m Britestream Blue LED Light 12m Britestream Multicoloured LED Light 12m Britestream LED Light white 20m Britestream Blue LED Light 20m Britestream Multicoloured LED Light 20m Britestream LED replacement kit white 1m Britestream Blue LED replacement kit 1m Britestream Multicoloured LED replacement kit 1m Super Bright Super bright energy saving LEDs capable of delivering 352 lumens of light. (White LED light) Long Life BriteStream LED has a life span of over 70,000 hours, which is equivalent to over 30 years of illumination. (Based on 6 hours usage per day). Built-in Heat Management The LED heat output is automatically managed by its electronic circuitry. Superior Construction BriteStream LEDs are totally enclosed in a waterproof Polycarbonate housing. Pool Cleaner Shield Improves the aesthetics of the installation and prevents the pool cleaner skirt from being trapped behind the light. Specifications Zonal Distribution Power Usage Input Voltage LED Life 0 to 180 degrees 15 Watt 12V AC 70,000 hours mm / 8.6 Innovative Lens Its innovative polycarbonate lens cools the LEDs and provides a uniform diffusion of light. 66mm / 2.6 Slotted Rims Assists heat dissipation, as well as permitting water circulation. Energy Saving BriteStream LEDs operate on only 15 watts of energy, which is approximately 15% of the electrical power usage of a halogen light. Save time, water and energy. 84

85 Underwater Lights LITESTREAM UNDERWATER LIGHTS (12 Volts, 100w Halogen) - SURFACE MOUNTED Litestream 100w light 20M 20m Litestream 100w light 12M 12m Litestream 100w light 4M 4m Litestream 100w light 2M 2m WATERCO UNDERWATER LIGHT COLORED LENSES - suitable for Halogen light only Part No. Product Description Price Screw - on Coloured lenses - Blue Screw-on coloured lens - Red Screw-on coloured lens - Green Coloured Lenses The Litestream Underwater Lights come with an additional blue screw-on lens. Red and green lenses are also available for separate purchase. Electrical Specifications Input Voltage 12 VAC Input Power 100W RETROFIT CONNECTOR (IP68) Part No. Product Description Price Retrofit Connector Assembly Retrofit Connector (IP68) Simply crimp both connections with the splice connectors, slide the cable sleeve over the connection and hand tighten the gland nuts. Cable sleeve Pool light cable Splice Connectors Gland nut with O - ring 85

86 Underwater Lights WATERCO UNDERWATER LIGHT CONVERSION KITS - SUITABLE FOR SURFACE MOUNTED LIGHTS Part No. Product Description Price Fibreglass Conversion Kit Wooden Pool conversion kit including dress ring Fibreglass Conversion Kit a) Drill a 28mm hole in the pool wall at 550mm below top of coping. This is where the cable will pass through the wall. b) Cover the back of the Gland Plate with Silicone Sealant and insert the boss of the Gland Plate into the drilled hole. c) Drill 4 holes with a 1/8 drill using the gland plate holes as a drilling guide. Apply a small amount of Sillicone Sealant on the screws and drive into predrilled holes. d) Screw wall bracket to the wall and seal screws. e) Wind cord loosely around back of light catching it in clips. f) Insert gland nut, rubber washer and then plastic seal ring onto the power cord and feed the power cord through the gland plate. g) Tighten gland nut onto gland plate. h) Fit light to Wall Bracket by sliding the light downwards until the clip and hook engage. Fix with screw at top Vinyl liner / wooden pool conversion kit a) Drill a 32mm hole in the pool wall at 550mm below top of coping. This is where the cable will pass through the wall. b) Mark fixing holes for Gland Plate and Wall Brackets. Drill holes to suit screws supplied. c) After fitting liner, slit liner at 32mm hole position. Fit Gland Plate and Wall Bracket. d) Wind cord loosely around back of light catching it in clips. e) Insert gland nut, rubber washer and then plastic seal ring onto the power cord and feed the power cord through the gland plate. f) Tighten gland nut onto gland plate. g) Fit light to Wall Bracket by sliding the light downwards until the clip and hook engage. Fix with screw at top. 86

87 Sanitization 87 Waterco Sanitization

88 88 Waterco Sanitization

89 Sanitization HYDROCHLOR Ezy Timer Precision Chlorine Production Super Chlorination Function WATERCO HYDROCHLOR SALT CHLORINATORS Part No. Product Description Nom. Size Ctn Qty Price Hydrochlor 20A SC LCD 20 Amps Hydrochlor 25A SC LCD 25 Amps Hydrochlor 30A SC LCD 30 Amps Hydrochlor Salt Water Chlorinator The Hydrochlor will automatically maintain the chlorine level of your pool and eliminate problems associated with periods of very high or low chlorine levels. Fewer fluctuations in chlorine levels mean fewer fluctuations in ph levels. This adds up to more stable, balanced water. Consistently maintained sanitizer levels in the pool water will prevent the growth of all common algae. A salt-water chlorinated pool requires much less attention than a chlorine pool A salt water pool provides a more comfortable swimming environment. Salt water feels better and is less irritating to the body than standard chlorinated water. The amount of salt required varies from 3500ppm to 6000ppm. In comparison, a teardrop is about 7,200 ppm and ocean water is about 35,000 ppm. Self Cleaning, Electrolytic Cell Battery Back Up Energy Saving Winter Mode Suitable for pool covers , , Hydrochlor Power Pack The Power Pack monitors and controls chlorine production by regulating the amount of electrical energy supplied to the salt cell. Maintenance Hydrochlor Self Clean Model has the added ability to reverse the polarity of the voltage to clean calcium buildup off its electrodes HydroChlor Power Pack Dimensions 2 1. Large aluminium heat sink for heat dissipation. 2. Space saving vertical design. 3. UV and weather proof housing. 4. Chlorinator Override switch. 5. Ezy timer. 6. Chlorine production can be adjusted to reflect different seasonal requirements. 7. Chlorine production indicator LEDs. 8. No Flow LED. Please note: Correct earth bonding is essential when using this product. Refer to the installation manual for correct fitting instruction. 70mm (2.8in) A Brass pin quick connectors. Hydraulically efficient design. Large lock ring for easy access. Unobtrusive cradle design to minimise calcium build up. Input Watt Output Chlorine Max Pool Capacity Model (W) current DC Production (L) Climate max (A) max (g/hr) Temperate Tropical Hydrochlor 20A ,000 48,000 Hydrochlor 25A ,000 60,000 Hydrochlor 30A ,000 72,000 All units are equipped with a 3 amp self-resetting fuse. Pool capacity is based on a stabilised swimming pool with a minimum salt level of 5,000 ppm Durable UV stabilised engineering plastic cell housing with a maximum working pressure of 4 bars. Titanium Electrolytic Cell the cell s large surface area enables it to operate under low salt conditions. 2 / 50mm connections for quick connection to pipe work. 200mm (7.9in) FRONT VIEW 368mm (14.5in) 141mm (5.6in) SIDE VIEW B C D 20A 25A 30A Primary Input (Volts) / Frequency (Hz) / / / Input Power (W) Maximum Total Current (A) Pump Outlet Maximum (A) Cell Voltage (V) Degree of Protection IP23 IP23 IP23 Model A (mm) B (mm) C (mm) D (mm) 20SC /25SC /30SC SALT LEVELS Minimum = 4000ppm Optimum = 6000ppm Maximum = 6500ppm 89

90 Sanitization chlorine free system How does it work? Hydroxypure sanitisation is based on the Peroxone Treatment Process (PTP), which combines Perox (a specially blended form of Hydrogen Peroxide) (H ² 0 ² ) and hybrid ozone (0 ³ ) to turbocharge the sanitisation process. H ² 0 ² + 0 ³ = Peroxone The Advance Oxidation Process has the superior ability to remove bacterial threats more effectively than any other oxidisation process currently available on the market. The use of two disinfectants (ozone and Perox) work in harmony to increase active oxygen in the water. The synergy of the two disinfectants will ensure your water environment is safe without creating harmful chemical byproducts. The process of mixing ozone and Perox together is to produce hydroxyl radicals. The addition of Perox accelerates the dissolution of ozone, causing the hydroxyl radical concentration to be enhanced. With a greater concentration of hydroxyl, increased levels of sanitation are achieved. The benefits are endless Chlorine & salt free Refreshing swim in fresh water environment No need to shower after swimming No allergic reactions Outstanding water clarity Water saving Extends the life of the pool surface and pool equipment Fully automated sanitisation and ph control Minimal maintenance ASTHMA FOUNDATION (NZ) NATIONAL ASTHMA COUNCIL AUSTRALIA SENSITIVE CHOICE SUPPORTING ASTHMA CARE 90

91 Sanitization Pool water so pure it s like taking a swim in a natural spring. Automated sanitisation for peace of mind Hydroxypure system tests the pool water and automatically maintains adequate levels of Perox within the swimming pool for continual sanitisation. Additionally, Hydroxypure system will respond to the different demands by automatically adjusting dosing requirements for high bathing loads, hot weather, rain and pool water top ups. The pool water s ph is also automatically adjusted, protecting the swimming pool swimmers. The Hydroxypure process Pool water is pumped (1) through a venturi (2), which injects ozone (3) into the water. The ozone reacts with the residual Perox in the water to create Peroxone. Hydroxypure s dual probe (4) measures the amount of Perox detected in the pool water as well as measuring its ph level. Hydroxypure installation Hydroxypure is an affordable solution that can be easily installed on new pool installations or retrofitted to salt chlorinated pools. Acid Injection Lines Perox Injection Lines Ozone Injection Line 3 The Peroxone reaction is enhanced with the MultiCyclone s many centrifugal hydrocyclones. (5) 5 80% of incoming sediment is also spun out of the water into MultiCyclone s chember. 8 Water is filtered through the pool s filter. (6) The filtered pool water is then dosed with Perox (7) and its ph level (8) is automatically adjusted via the addition of a small amount of acid. 1 Hydroxypure Part No. Product Description Nom. Size Ctn Qty Price Hydroxypure Deluxe 100 c/w wifi 100m³ - 6, (1) Comprising of twin dosing pumps and hybrid ozonator, complete with constant monitoring of poolwater and ph levels. (2) Equipped with data logging capability and access via internet web server. (3) Remote monitoring of water balances, dosing rates, chemical consomption and more. (4) Setting changes can be completed from anywhere you have internet access Hydroxypure 100 w/o wifi 100m³ - 5, Comprising of twin dosing pump and, hybrid ozonator, complete with constant monitoring of poolwater ph levels Hydroxypure Deluxe 150 c/w wifi 150m³ - 7, (1) Comprising of twin dosing pumps and hybrid ozonator, complete with constant monitoring of poolwater and ph levels. (2) Equipped with data logging capability and access via internet web server. (3) Remote monitoring of water balances, dosing rates, chemical consumption and more. (4) Setting changes can be completed from anywhere you have internet access Hydroxypure 150 w/o wifi 150m³ - 6, Comprising of twin dosing pump and, hybrid ozonator, complete with constant monitoring of poolwater ph levels. PP Perox 35% 25L HCL15/25 Perox Acid 25L Perox Perfect -maintenance chemical used as a flocculent and clarifier. 5L Perox Balance - will help you lock in the chemical settings and reduce Perox acid consumption. 5L Please note: The prices above do not includea MultiCyclone as standard, this is an optional extra which should be ordered separately. 91

92 92 Waterco Heaters

93 HEATING 93 Waterco Heaters

94 94 Waterco Heaters

95 Pool Heating - Heat Pumps The latest advancement in swimming pool heating, ElectroHeat Heat Pumps are an energy efficient way to heat your swimming pool or spa. ElectroHeat produces up to 5 times more heat energy than the electrical energy it consumes. Extra Large Evaporator Area (ElectroHeat Plus) ElectroHeat Plus has an extra large evaporator allowing it to collect more heat from the outside air. Weather proof ABS Cabinet The ElectroHeat s cabinet is constructed from UV treated, corrosion proof ABS, enabling the ElectroHeat to withstand most weather conditions. Automated Controls Simply program your desired pool water temperature and let the ElectroHeat do the rest. Protection devices have been built into the heater for ease of operation and to increase the durability of the product. Auto defrost control to eliminate frost on the evaporator in cold temperature conditions. Auto Flow switch to switch off the system when there is no water flow. High /low pressure auto reset to shut the system and compressor in the event of low or high pressure. Compressor protection via time delay A time delay is incorporated into the system, allowing the refrigerant pressures to equalise before the compressor starts/restarts. Environmentally friendly refrigerant ElectroHeat products use the R410A refrigerant, a high thermodynamic performance coolant that is environmentally friendly and totally harmless to the ozone layer. This coolant is in accordance with the Montreal protocol and will not harm the ozone layer. Scroll compressor Scroll compressors are the most powerful, energy efficient compressors on the market and most importantly they are also the quietest. Save time, water and energy. The plumbing connections are 50mm / 1 1 /2 UPVC half unions for easy plumbing. Titan double coil heat exchanger: With much greater surface area and longer contact time, this Waterco innovation allows higher heat transfer, thus delivering some of the highest efficiencies in its class. A Titanium Heat Exchanger offers total protection against erosion and corrosion. Titanium metal s corrosion resistance is due to a stable, protective, strongly adherent oxide film. This film forms instantly when a fresh surface is exposed to air or moisture. Titanium is resistant to: chlorinated water, ozone, iodine, Baquacil, bromine and salt water. Greater Temperature Differential = Greater Heat Power = Faster Results! Powerful Heat Transfer The exclusive design of the ElectroHeat s heat exchanger creates an unmatched and powerful heat transfer source. This is the result of the increased surface area contact the exchanger has with the water that circulates around the condenser tubes. Because of the improved design, the heat exchanger generates a higher temperature differential between the water entering and the water exiting the heat exchanger. Quick and easy installation. Simply connect the pool return line to and from the heat pump and connect the power source. 95

96 Pool Heating - Heat Pumps WATERCO HEAT PUMPS - All ElectroHeat Plus MKIII and ElectroHeat MKIII heat pumps come complete with a commercial grade Titanium heat exchanger and digital display as standard. All 3 phase heat pumps are supplied with a 3 phase indicator and protector. ELECTROHEAT PLUS EPX016T251-G ElectroHeat Plus MKIII 16kW Single Phase - Digital 16kW EPX016T353-G ElectroHeat Plus MKIII 16kW Three Phase - Digital 16kW EPX021T251-G ElectroHeat Plus MKIII 21kW Single Phase - Digital 21kW EPX021T353-G ElectroHeat Plus MKIII 21kW Three Phase - Digital 21kW EPX025T251-G ElectroHeat Plus MKIII 25kW Single Phase - Digital 25kW EPX025T353-G ElectroHeat Plus MKIII 25kW Three Phase - Digital 25kW EPX031T353-G ElectroHeat Plus MKIII 31kW Three Phase - Digital 31kW EPX037T353-G ElectroHeat Plus MKIII 37kW Three Phase - Digital 37kW EPX044T353-G ElectroHeat Plus MKIII 44kW Three Phase - Digital 44kW 4, , , , , , , , , Double Coil Titanium Heat Exchanger With much greater surface area and longer contact time, this Waterco innovation allows higher heat transfer, thus delivering some of the highest efficiencies in its class. A Titanium Heat Exchanger offers total protection against erosion and corrosion. Titanium metal s corrosion resistance is due to a stable, protective, strongly adherent oxide film. This film forms instantly when a fresh surface is exposed to air or moisture. Titanium is resistant to: chlorinated water, ozone, iodine, Baquacil, bromine and salt water. Specifications Model Nominal Heating Capacity (BTU/h)* 55,000 70,000 85, , , ,000 Power Output (kw) Power Supply (Volt) Supply Voltage Phase 1 Phase 3 Phase 1 Phase 3 Phase 1 Phase 3 Phase 1 Phase 3 Phase 3 Phase 3 Phase Power Consumption (kw/h) Unit Running Amperage (Amp) Fan Full Load Amperage (FLA) Min-Max Breaker or Fuse Noise 3m in db Min-Max Air Temperature (C) Weight (kg) * The heating capacity depends on water and ambient temperature, as well as humidity level. * Waterco Heat Pump performance metrics were obtained during laboratory testing conducted in Canada to the requirements of ASHRAE Standard , and ANSI/AHRI Standard 1160: (I-P)-2009 in conditions of 26 Air/63% RH/ 26 Water. Water Flow & Plumbing Characteristics Water Bypass Type Ext. Field Install Min./Max. Water Flow Rate m³/h Min./Max. Water Inlet Temperature 18º - 40º Plumbing Connection Size 1 ½ / 50mm - PVC Dimensions Model A B C ElectroHeat Plus MK III 55,70, mm 890 mm 870 mm ElectroHeat Plus MK III 105,125, mm 880 mm 1120 mm C Clearance Clearance 60 to 90 cm No obstruction above Clearance 60 to 90 cm A B Clearance 60 to 90 cm Clearance 60 to 90 cm Save time, water and energy. 96

97 Pool Heating - Heat Pumps The latest advancement in swimming pool heating. Electroheat Ultra heat pumps extracts latent heat from the surrounding air, intensifies it and transfers it to your swimming pool. Electroheat Ultra heat pumps will heat your pool even when the ambient air temperature is near freezing point (0 C). Energy efficient heating Temperature management & self-diagnosis Automatic hot gas de-icing for cold climates High density titanium heat exchanger Weather proof cabine Double Coil Titanium Heat Exchanger With much greater surface area and longer contact time, this Waterco innovation allows higher heat transfer, thus delivering some of the highest efficiencies in its class. A Titanium Heat Exchanger offers total protection against erosion and corrosion. Titanium metal s corrosion resistance is due to a stable, protective, strongly adherent oxide film. This film forms instantly when a fresh surface is exposed to air or moisture. Titanium is resistant to: chlorinated water, ozone, iodine, Baquacil, bromine and salt water. ELECTROHEAT ULTRA ESZ016T251-G ElectroHeat 16kW Single Phase - Ultra digital 16kW ESZ022T251-G ElectroHeat 22kW Single Phase - Ultra digital 22kW ESZ022T353-G ElectroHeat 22kW Three Phase - Ultra digital 22kW ESZ029T353-G ElectroHeat 29kW Three Phase - Ultra digital 29kW ESZ035T353-G ElectroHeat 35kW Three Phase - Ultra digital 35kW Specifications ElectroHeat Ultra heating ElectroHeat Ultra features an automatic hot gas deicing function. If any ice forms on the evaporator, the ElectroHeat Ultra s pipe configuration is temporarily reconfigured via a reversing valve to allow hot gas to melt the ice, the ElectroHeat Ultra then reverts back to heating your pool. Models Electroheat Ultra16kW Electroheat Ultra 22kW Electroheat Ultra29kW Electroheat Ultra 35kW Nominal Heating Capacity btu/h * 55,000 75, , ,000 Power Output (kw) Supply Voltage (VAC) Supply Voltage Phase 1 phase 1 phase 3 Phases 3 Phases 3 Phases Power consumption (kw/h) Unit Running Amperage Fan Full Load Amp (FLA) Min / Max Breaker or Fuse (AMP) Noise 3m in db Min./Max. Air Inlet Temperature (C) Weight (kg) * The heating capacity depends on water and ambient temperature, as well as humidity level * Waterco Heat Pump performance metrics were obtained during laboratory testing conducted in Canada to the requirements of ASHRAE Standard , and ANSI/AHRI Standard 1160: (I-P)-2009 in conditions of 26 Air/63% RH/ 26 Water. Water Flow & Plumbing Characteristics Water Bypass Type Ext. Field Install Min./Max. Water Flow Rate m³/h Min./Max. Water Inlet Temperature 10º - 40º Plumbing Connection Size 1 ½ / 50mm - PVC Dimension Ultra 16 Ultra 22 Ultra 29 Ultra 35 Width 780mm 890mm 890mm 890mm Length 890mm 880mm 880mm 880mm Height 870mm 1120mm 1120mm 1120mm Weight Ultra 16 Ultra 22 Ultra 29 Ultra 35 77kg 88kg 90kg 90kg 5, , , , , Save time, water and energy. 97

98 Pool Heating - Heat Pumps ELECTROHEAT PLUS HEAT AND COOL EHC031T353-6D ElectroHeat Plus Heat + Cool 31kW 31kW EHC037T353-6D ElectroHeat Plus Heat + Cool 37kW 37kW 7, , Double Coil Titanium Heat Exchanger With much greater surface area and longer contact time, this Waterco innovation allows higher heat transfer, thus delivering some of the highest efficiencies in its class. A Titanium Heat Exchanger offers total protection against erosion and corrosion. Titanium metal s corrosion resistance is due to a stable, protective, strongly adherent oxide film. This film forms instantly when a fresh surface is exposed to air or moisture. Titanium is resistant to: chlorinated water, ozone, iodine, Baquacil, bromine and salt water. Specifications Models Electroheat Plus Heat & Cool 31kW Electroheat Plus Heat & Cool 37kW Nominal Heating Capacity btu/h * 105, ,000 Nominal Cooling Capacity btu/h * 52,000 79,000 Power Output (kw) Supply Voltage (VAC) Supply Voltage Phase 3 Phases 3 Phases Power consumption (kw/h) Unit Running Amperage Fan Full Load Amp (FLA) Min / Max Breaker or Fuse (AMP) Noise 3m in db Min./Max. Air Inlet Temperature (C) Weight (kg) * The heating capacity depends on water and ambient temperature, as well as humidity level * Waterco Heat Pump performance metrics were obtained during laboratory testing conducted in Canada to the requirements of ASHRAE Standard , and ANSI/AHRI Standard 1160: (I-P)-2009 in conditions of 26 Air/63% RH/ 26 Water. Water Flow & Plumbing Characteristics Water Bypass Type Ext. Field Install Min./Max. Water Flow Rate m³/h Min./Max. Water Inlet Temperature 6-40 Plumbing Connection Size 1 ½ / 50mm - PVC Dimension Model Width Length Height Electroheat Heat & Cool 31 & mm 876mm 1130mm Heat-Cool units have a reversing valve which enables the heat pump to not only heat up the water, but also to cool down the water during the hot summer months. Normally, a heat pump will gather heat energy from the air with its evaporator coil. Using refrigerant and several other components, the heat is transferred over to the pool water. By reversing this process the heat pump can actually take heat out of the water, transfer it to the refrigerant, and run it through the evaporator coil. The coil dissipates the heat into the air. Save time, water and energy. 98

99 Pool Heating - Heat Pumps ELECTROHEAT XL EU ElectroHeat XL 12kW Single Phase 12kW EU ElectroHeat XL 15kW Single Phase 15kW EU ElectroHeat XLR 19kW Single Phase (Quick defrost cycle) 19kW EU ElectroHeat XLR 23kW Single Phase (Quick defrost cycle) 23kW 2, , , , Save time, water and energy. Specifications Models EU - XL EU - XL EU - XLR EU - XLR Nominal Heating Capacity btu/h * BTU s BTU s BTU s BTU s Power Output (kw) Supply Voltage (VAC) Supply Voltage Phase 1 phase 1 phase 1 phase 1 phase Power consumption (kw) Unit Running Amperage Water Connections 1½ in /50mm 1½ in /50mm 1½ in /50mm 1½ in /50mm Min / Max Breaker or Fuse (AMP) Quick Defrost Cycle Active Active Dimension 46 x 27 x 12.5 in 46 x 27 x 12.5 in 46 x 27 x 12.5 in 46 x 27 x 12.5 in 117 x 68.5 x 32 cm 117 x 68.5 x 32 cm 117 x 68.5 x 32 cm 117 x 68.5 x 32 cm Weight (kg) * The heating capacity depends on water and ambient temperature, as well as humidity level. * Information for reference only, results may vary depending on the region, temperature and the use of a solar blanket * Waterco Heat Pump performance metrics were obtained during laboratory testing conducted in Canada to the requirements of ASHRAE Standard , and ANSI/AHRI Standard 1160: (I-P)-2009 in conditions of 26 Air/63% RH/ 26 Water. Main Features Noise Reduction Components New digital control which instantly displays any diagnosis in the unit and enables a fast and efficient service. Extra large evaporator surface collects more heat from the ambient air, which allows better performance of the unit and ensures a greater heat transfer to the pool. Profile fan blades increase air flow and therefore performance while reducing noise. Titanium double coil heat exchanger: With much greater surface area and longer contact time, this Waterco innovation allows higher heat transfer, thus delivering some of the highest efficiencies in its class. Quick defrost cycle by the inversion of the cooling circuit, which allows a complete and quick defrost cycle (2 mins). This option allows the pool to be hea5ted at a lower ambient temperature Water circulation guide within the TITANIUM heat exchanger increases water turbulence and velocity, thus providing maximum thermal transfer. Scroll type compressor producing 10 db less noise than other brands available on the market. GEY040R and GEY050R Rotary Compressors 99

100 Pool Heating - Heat Pumps ELECTROHEAT PRO WSC330T353N Electroheat Pro 96kW 96kW 20, Electroheat Pro Commercial heat pump The largest of the Electroheat range our 96kW commercial unit has been designed to offer maximum output and reliability in a commercial setting. The heat pump cabinet is constructed using high gauge powder coated metal sheet ensuring a high quality finish and sturdy con-struction. The ultra rigid metal base incorporates forklift access thus reducing the risk of damage during transport and allowing for ease of installation once on site. Double Coil Titanium Heat Exchanger With much greater surface area and longer contact time, this Waterco innovation allows higher heat transfer, thus delivering some of the highest efficiencies in its class. A Titanium Heat Exchanger offers total protection against erosion and corrosion. Titanium metal s corrosion resistance is due to a stable, protective, strongly adherent oxide film. This film forms instantly when a fresh surface is exposed to air or moisture. Titanium is resistant to: chlorinated water, ozone, iodine, Baquacil, bromine and salt water. Save time, water and energy. 100

101 Pool Heating - Heat Pumps Two ½HP fan motors power the two 4-blade 26 fans that provide high volume air flow to the twin evaporators. The Electroheat Pro boasts innovative design solutions, such as the dual 11HP Sanyo Scroll compressors ( V/50Hz/3ph), and the control panel which monitors the functioning of both compressors individually, as well as monitoring the 3 phases. Specifications Electroheat Pro 96 Nominal Heating Capacity btu/h * 330,000 Power Output (kw) 96 Supply Voltage (VAC) Supply Voltage Phase 3 Phases Power consumption (kw/h) Unit Running Amperage 30 Amp Fan Full Load Amp (FLA) 2.4 Amp Min / Max Breaker or Fuse (AMP) 50/60 Noise 3m in db 59 Min./Max. Air Inlet Temperature (C) 6-40 Weight (kg) 453 * Waterco Heat Pump performance metrics were obtained during laboratory testing conducted in Canada to the requirements of ASHRAE Standard , and ANSI/AHRI Standard 1160: (I-P)-2009 in conditions of 26 Air/63% RH/ 26 Water. Dimensions Model A B C Electroheat Pro 1730 mm 1090 mm 1120 mm Clearance Clearance 60 to 90cm Clearance 60 to 90cm C Clearance 60 to 90cm Clearance 60 to 90cm A B 101

102 Pool Heating - ZANE Solar Heating Zane Solar effectively captures the sun s energy to heat your pool Made in Australia ZX3000 The ZX3000 controller has revolutionised solar pool heating systems. This state-of-the-art computerised solar controller can control both the filter and the solar systems for your pool or spa. The ZX3000 also has the ability to control extra heating equipment to work in conjunction with the solar system e.g. gas heater, heat pumps. PC5 The PC5 computerised solar controller has an auto-off and manual switch with a top out temperature control, winter mode and digital temperature readout. Flocheck valve The Zane Flocheck valve is integrated with the solar controller and will stop the solar pump if the pool filtration pump is not working. Solar Booster pumps Zane Solar systems require efficient circulation to function at its peak performance. For this reason, we use a specially designed range of Aquastream Solar Booster pumps incorporating the essential features required to make them compatible with Zane Solar systems. 102

103 Pool Heating - Zane Solar Heating Gulfpanel GULFPANEL KITS Part No. Product Description Panel length Ctn Qty Price Gulfpanel - 600mm wide 3.9 m Gulfpanel - 600mm wide 3.4 m Gulfpanel - 600mm wide 2.9 m Gulfpanel - 600mm wide 1.4 m Zane Solar Gulfpanel Extensive research, development and testing have gone into the refinement of Zane Solar Gulfpanel. Gulfpanels are precision injection moulded from a high grade formulated polymer, selected for its outstanding heat transfer properties and its exceptional durability. Gulfpanels are UV stabilised and designed to withstand extreme weather conditions. Save time, water and energy. Gulfpanel s modular design allows the creation of a solar system, which is easily adaptable to a variety of roof configurations. Each Gulfpanel consists of a multitude of miniature solar absorber tubes to maximise its surface area exposed to the sun. The solar absorber s thick circular wall structure is impervious to attacks from birds and vermin. Gulfpanel s seamless one piece construction eliminates any welds or seams, ensuring long lasting performance. The modular panels are connected together via reinforced water tight unions without the need for gluing or the use of clamps, guaranteeing a robust leak free connection. Gulfpanels are securely fastened to the roof via a series of custom built roof clamps designed to allow for expansion and contraction of the Gulfpanels 103

104 Pool Heating - Zane Solar Heating Gulfpanel Manifold Coupling Threaded GULFPANEL EQUIPMENT Part No. Product Description Price Manifold Coupling Threaded Half Union Nut Threaded End Plug Black End Cap Half Union Assembly Black Tail Threaded End Manifold Clamp Set Tube Support Tube Support Joiner Half Union Nut Threaded End Plug Black End Cap Half Union Assembly Black Tail Threaded End Tube Support Joiner Tube Support Joiner Manifold Clamp Set 104

105 Pool Heating - Zane Solar Heating Controllers ZX3000 Controller Each 85190EU PC5 Controller Each Weatherhood - ZX3000 Each Extension Harness - 15m Each ZX3000 Gas Heater Kit Each Timer - Solar pump interrupt Each Spare Parts Power Pack - ZX3000 Each Harness - ZX3000 Each PC Board - ZX3000 Each PC Board - ZX3000 c/w battery connection Each Pool Probe Replacement kit Each Probe Cable - ZX3000 & PC2/3/4 Metre Control Board - ZX3000 c/w base & lead - PC3 Each Control Board - ZX3000 c/w base & lead - PC4 Each Valve Stem - ZX3000 & PC2/3/4 Each Flocheck Flapper Assembly 1½ Each Flocheck Flapper Assembly 2 Each Flexilock Fittings Plugs Pk Joiners Pk Sleeves - Domestic Pk Sleeves - Commercial Pk

106 Pool Heating - Electric DIGIHEAT ELECTRIC HEATERS Part No. Product Description Price Digiheat kw Digiheat kw Digiheat kw Digiheat kw Digiheat kw Digiheat kw , , Digiheat inline electric heaters are versatile, easy to use and built to last. Program your desired water temperature and let Digiheat do the rest. Digital temperature management & self diagnosis Corrosion resistant heating element Streamline weather proof housing Available in sizes 2.4, 3.6, 4.8, 6.0,18 & 24 kw Single Phase Specifications DigiHeat Code Model Volts Complies with EN and AS3136/NZS6232 Current Draw Minimum Circuit Size Connection Size kw 240 Volts (single phase) 10 A 15 A 1½ / 50mm kw 240 Volts (single phase) 15 A 20 A 1½ / 50mm kw 240 Volts (single phase) 20 A 25 A 1½ / 50mm kw 240 Volts (single phase) 25 A 30 A 1½ / 50mm kw 415 Volts (three phase) 25 A / phase 30 A/phase 2 / 63mm kw 415 Volts (three phase) 35 A / phase 40 A/phase 2 / 63mm Model kw Time required to heat 1000 litres by 1 deg C in minutes: Time required to heat 1000 litres by 5 deg C in minutes: 2.4kW kW kW kW kW kW 5 22 *The above is a only a guide and is dependent upon other factors such as heat loss and ambient conditions at the time of operation. Dimensions Single phase model Available in sizes 2.4, 3.6, 4.8 & 6.0 kw for single phase 240Volts Three Phase Three phase model Available in sizes 18 & 24 kw for 3 phase 415Volts

107 Spa Equipment & Accessories Waterco Spa Equipment

108 Spa Equipment & Accessories TOP LOAD NICHE FILTER Top Load Filter 50 sq ft 1½ connectors Top Load Filter 50 sq ft 2 connectors Top Load Filter 75 sq ft 1½ connectors AF1060 Top Load Niche and Lid - White AF1066 Top Load Niche Lid only - Grey AF1063 Top Load Niche and Lid - Black AFI062 Top Load Filter Base C A Model Filter Area (sq. m) Maximum Flow (m 3 /hr) Working Pressure Maximum Temperature C BAR / 51 PSI 40 o C C BAR / 51 PSI 40 o C B Model A B C C50 75mm 385mm 205mm C75 75mm 640mm 205mm WATERCO SPA LIGHT ASP077 Spa Light - 12volt c/w transformer - rear access ASP078 Spa Light - 12volt c/w transformer - front access Ø87mm 64mm 91mm 46mm Transformer Input Output Fuse Globe Type Globe Output 12V ac, Ozram Decostar 35 watt/ V, Cycle 50 Hz 4 amp delay 42 va ALU bi pin globe watt SPA BLOWERS Airflo Blower - CE 900W Whisperair Blower - CE 900W Whisperair S Blower c/w airswitch - CE 900W Size Power Voltage Weight Suction 225 x 280 x watt 240AC 3.7kg 2 hpvc Safety flow n loops required in installation. Whisper quiet operation Hi-flow air movement Compact design Variable mounts Compact Design The compact design of the Waterco spa blower enables installation in smaller areas and tight corners. The convenient position of the mounting base and air inlet/outlets reduces installation time and cost. Thermal Cutout Waterco spa blowers feature an important safety feature, an integral thermal cutout. This cutout stops the electric motor if it becomes excessively warm. This cutout does not require manual resetting and will automatically restart the motor when it is sufficiently cooled. 108

109 Spa Equipment & Accessories Aquaculture Waterco Aquaculture

110 Aquaculture Lacron Pond Master System AQUABIOME BEAD FILTER PACKS - Combined Mechanical and Biological Filtration Pond Master Bead Filters Part No. Product Description Price Lacron 16 Bead Pond Filter Pack 1½ MPV Lacron 20 Bead Pond Filter Pack 1½ MPV c/w Eze Flo system Lacron 24 Bead Pond Filter Pack 1½ MPV c/w Eze Flo system Lacron 30 Bead Pond Filter Pack 2 MPV c/w Eze Flo system PFP Lacron 36 Bead Pond Filter Pack 2 MPV c/w Eze Flo system 1, , , , , Waterco 20kg Bio Mec Bead Media (20kg) Waterco Premium Bio Mec filter media is available in 20kg bags and ideally suited for use with any of the Waterco bead filtration systems. Manufactured from high quality, virgin plastic ensuring a filter bead of the highest standards to provide an excellent standard of filtration. Bio Mec Bead Media Choosing the correct size Bio-Mec for your pond The following is the list of specifications for the size range: Filter Diameter Size Filter Surface Area m Media Volume in kg Min - Maximum Flow Rate m 3 /hr Pond Size m Pond size gallons The Aquabiome range of Pond Filter Packs have been specifically engineered for pond & water gardens. Aquabiome provides mechanical filtration, biochemical oxygen demand (BOD) reduction in a single housing that includes a specifically engineered lateral and slotted collector system. All systems are supplied complete with Filter, 6 way MPV, pipework, valve, blower and base. Waterco Eze Flo system - new for 2013 For 2013 Waterco are pleased to release the Eze Flo plumbing system as a standard feature on the 20, 24, 30 and 36 Aquabiome Pond Master Bead filter systems. The Eze Flo feature enables a lower wattage pump to be used and by reducing the head loss of the system which in turn saves money by reducing electricity bills. The Eze Flo system can save up to 30% pressure loss and running costs by simply eliminating the need for the Multiport Valve on the standard filtration cycle. 110

111 Aquaculture Pond Professional Bead Filter - Combined Mechanical and biological Filtration E500 Exotuf Pond Professional Bead filter 20 (500mm) E600 Exotuf Pond Profesional Bead Filter 24 (600mm) Filter Diameter size Filter Surface area Media volume Minimum- Maximum flow rate mm m² kgs m³ gallons 20 / 500mm / 600mm The Exotuf Pond Professional Bead Filter is specially engineered for the Koi enthusiast with ponds up to 7920 gallons in size. A pre-plumbed unit which is compact in design, making the Exotuf Pond Professional an ideal choice for the Koi hobbiest. Pond size Pond size Bio-Mechanical Filtration Aquabiome Flow check valve Mechanical filtration Mechanical filtration physically removes solids from the pond by trapping solids between the crevices of the filter media. To Waste Air assisted backwash From Pond Flow To Pond Up Flow Backwash sight glass Six position Multiport valve Pressure gauge 8 clear polycarbonate lid Slotted collector Bio filter media UV and corrosion resistant fibreglass filter vessel Drain port Hydraulically efficient slotted (1.5mm) laterals Air blower Sturdy filter skid base 0.4mm 0.5mm Biofilter media Waste products Biological filtration Biological filtration is the most effective method of removing toxins (ammonia) and breaking it down into nitrites and then into nitrates which provide food to your aquatic plants (referred to as the Nitrogen Cycle). This is accomplished by using naturally occurring bacteria and giving it a place to live in the Biofilter media where it is exposed to large quantities of food and oxygen. Nitrogen Cycle The cycle begins when fish eat and then excrete ammonia. Bacteria in the biological filter eats the ammonia and excretes nitrite. Nitrite is also toxic to fish and needs to be removed. Another type of bacteria in the filter eats nitrite and excretes nitrate. Nitrate is non-toxic to fish in small quantities and is used by plants as fertilizer. The entire cycle then repeats itself upon completion. Food Uneaten food Decomposition by fungi and bacteria Plant fragments, dead animals, etc Incorporated into plant protein 1. Water is pumped to the Multiport valve and diverted to the lower filter. 2. The inflowing water is then evenly dispersed through slotted laterals within the lower section of the filter. 3. As the water flows upwards through the Biofilter media, the contaminated water is subjected to mechanical and biological filtration. AMMONIA (NH3/NH4*) Oxidation by Nitrosomonas bacteria Aerobic conditions Oxidation by Nitrobacter bacteria NITRITES (NO2 ) NITRATES (NO3 ) FREE NITROGEN (N2) Anaerobic conditions Reduction by anaerobic denitrifying bacteria 111

112 Aquaculture CENTRIFUGAL WATER FILTRATION WATERCO MULTICYCLONE FILTER MultiCyclone MC16 2 / 63mm MultiCyclone MC /2 / 50mm MultiCyclone Base MKII (optional) MultiCyclone over-pump stand (optional) NB: For pricing please see: filters page 20 Quick fit unions Save time, water and energy. Incoming water enters hydrocyclones tangentially, generating a strong centrifugal effect. The sediment is spun out to the hydrocyclone s wall, and then spirals down to the sediment chamber. The filtered water migrates towards the centre of the hydrocyclone where the flow reverses and spirals upwards through the outlet. Accumulation of sediment can be visibly monitored through the MultiCyclone s clear sediment chamber. The MultiCyclone is easily cleaned by opening the valve. Only 15 litres of water is discharged to cleanse the MultiCyclone. MultiCyclone is easy to install and fits to most existing pond filtration systems. There are no moving parts to wear out and replace and it s backed by Waterco s 2 year warranty. UV and corrosion proof Multiple hydrocyclones Clear poly carbonate sediment bowl Hydraulically efficient design Glass filled reinforced thermoplastic Lock ring 32mm / 1 sediment purge valve Note: The MultiCyclone is designed to filter sediment that is heavier than water. Floating debris cannot be filtered out by centrifugal filtration. 112

113 Aquaculture FIBREGLASS FILTRON VORTEX CHAMBERS Part No. Product Description Price VOR2500MER Vortex Chamber Gallon Pond VOR4000 Vortex Chamber - 4,000 Gallon Pond VOR4002 Vortex Chamber - 8,000 Gallon Pond These units are the most popular vortex chambers largely due to the high quality construction and design features. Manufactured from fibreglass with a gel coated internal finish, along with the addition of woven fibreglass matting, ensuring a chamber of the highest quality and strength. The large base ensures that the unit remains stable and the 2 x 4 pipe work means that the incoming pond water is sent swirling in the chamber and the large particle matter settles at the bottom where it can be discharged through a waste valve. The vortex chambers are available in 3 sizes to suit 2,500, 4,000 and 8,000 gallon ponds. A Model gallon/hr VOR VOR VOR C D B Dimensions (mm) Model A B C D VOR mm 735 mm 600 mm 440 mm VOR mm 980 mm 850 mm 520 mm VOR mm 1180 mm 1035 mm 580 mm WATERCO AQUAMITE PUMPS - Single Phase 220v - 240v, S/S shaft, CE approved Part No. Product Description Q. Max P. Max Price 1½ port supplied with 1½ imperial & 50mm metric quick connect unions Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal AUM Aquamite m³/hr 0.53kW AUM Aquamite m³/hr 0.58kW AUM Aquamite m³/hr 0.65kW AUM Aquamite m³/hr 0.76kW AUM Aquamite m³/hr 0.88kW Price and availability for TUV approved models available on request NB: For pricing please see: Pumps page 61 BLOWERS Part No. Product Description Price Airflo Blower 900W - CE Whisperair Blower 900W - CE Whisperair S Blower c/w airswitch 900W - CE NB: For pricing please see: Spa Equipment & Accessories page 108 Size Power Voltage Weight Suction 225 x 280 x watt 240AC 3.7kg 2 hpvc Safety flow n loops required in installation. 113

114 Aquaculture Digiheat inline electric heaters are versatile, easy to use and built to last. Program your desired water temperature and let Digiheat do the rest. Digital temperature management & self diagnosis Corrosion resistant heating element Streamline weather proof housing Available in sizes 2.4, 3.6, 4.8, 6.0,18 & 24 kw DIGIHEAT ELECTRIC HEATERS Part No. Product Description Price Digiheat kw Digiheat kw Digiheat kw Digiheat kw Digiheat kw Digiheat kw NB: For pricing please see: Pool Heating - Electric p104 Specifications DigiHeat Code Model Volts Complies with EN and AS3136/NZS6232 Current Draw Minimum Circuit Size Connection Size kw 240 Volts (single phase) 10 A 15 A 1½ / 50mm kw 240 Volts (single phase) 15 A 20 A 1½ / 50mm kw 240 Volts (single phase) 20 A 25 A 1½ / 50mm kw 240 Volts (single phase) 25 A 30 A 1½ / 50mm kw 415 Volts (three phase) 25 A / phase 30 A/phase 2 / 63mm kw 415 Volts (three phase) 35 A / phase 40 A/phase 2 / 63mm Model kw Time required to heat 1000 litres by 1 deg C in minutes: Time required to heat 1000 litres by 5 deg C in minutes: 2.4kW kW kW kW kW kW 5 22 *The above is a only a guide and is dependent upon other factors such as heat loss and ambient conditions at the time of operation. Single Phase Dimensions Single phase model Available in sizes 2.4, 3.6, 4.8 & 6.0 kw for single phase 240Volts Three Phase 469 Three phase model Available in sizes 18 & 24 kw for 3 phase 415Volts

115 Water Treatment Waterco Water Treatment

116 Purification Systems - Point of Use GRAVITY WATER PURIFIERS Part No. Product Description Price Stoneware Purifier 12 Litre (Incl. Dome Ceramic Cartridge) Stoneware Purifier 12 Litre Plus (Incl. Dome Ceramic Cartridge & CZR) Stoneware Purifier 8 Litre (Incl. Gravity Ceramic Cartridge) Stoneware Purifier 8 Litre Plus (Incl. Gravity Ceramic Cartridge & CZR) Porcelain Purifier 10 Litre (Incl. 2 x Gravity Ceramic Cartridge) Stoneware Purifier 12L Stoneware Purifier 8L Porcelain Purifier 10L Gravity Ceramic Cartridge Dome Ceramic Cartridge REPLACEMENT FILTER CARTRIDGES (GRAVITY PURIFIERS) Part No. Product Description Price Gravity Cartridge -single unit Dome Ceramic Cartridge - single unit CZR Cartridge CZR Cartridge 116

117 Purification Systems - Point of Use TOP MOUNT MICRON W SERIES WHOLE OF HOUSE FILTER Part No. Product Description Price Backwashable Deep Bed granular filters C/W 1½ 5 Way MPV Micron W250 Mk11 (7 Bar) Micron W300 Mk11 (7 Bar) Micron W350 (6 Bar) Micron W400 (6 Bar) Micron W500 (6 Bar) Micron W600 (6 Bar) Micron W700 (6 Bar) , Filter Model Bed Depth (mm) Filter Area (m 2 ) Valve Size (mm/ inch) Wat. flow 24m 3 /hr/m 2 (m 3 / hr) Com. flow 36m 3 /hr/m 2 (m 3 / hr) Sand 16/30 (kg) Zeoplus (kg) Filter Bed (litres) W / W / W / W / W / W / W / Model A B C D E F G H V W W W W W W W Micron WD Deep Bed Filters Part No. Product Description Price Micron WD300 (6 Bar) Micron WD350 (6 Bar) Micron WD400 (6 Bar) Micron WD500 (6 Bar) Micron WD600 (6 Bar) Micron WD700 (6 Bar) , , Micron WD Deep Bed Filters Micron WD Filters are designed with filter bed depths of 1000mm providing enchanced filtration & increased contact time. Filter Model Bed Depth (mm) Filter Area (m 2 ) Valve Size (mm/inch) Wat. flow 24m 3 /hr/m 2 (m 3 /hr) Com. flow 36m 3 /hr/m 2 (m 3 /hr) Sand 16/30 (kg) Zeoplus (kg) Filter Bed (litres) WD / WD / WD / WD / WD / WD / Model A B C D E F G H V WD WD WD WD WD WD

118 Purification Systems - Point of Use W300 Mk11 Automated Deep Bed Filters Part No. Product Description Price Micron Automated W300 Mk11 Deep Bed Filter c/w Automated Valve (time based) W300 Mk11 Tank Only, suitable for Automated Valve Micron Automated W250 Mk11 Deep Bed Filter c/w Automated Valve (time based) W250 Mk11 Tank Only, suitable for Automated Valve , Model Valve Size (mm/inch) Filter Area (m 2 ) Bed Depth (mm) Max. Flow Rate 36m 3 /hr/m 2 (m 3 /hr) Max. Working Pressure (Bar / psi) Media Volume (Litres) Sand 16/30 Zeoplus 16/30 (kg) (kg) W300 MkII 40/ / W250 MkII 40/ / Model Inner Diameter (mm) Overall Width (mm) Overall Height (mm) W300 MkII W250 MkII MPV for W & WD filters EURO 40mm 5-way MPV (6 Bar) EURO 40mm BSB collar 5-way MPV for MK II W300 (7 Bar) EURO 50mm 6-way MPV (4 Bar) W300 Mk11 Automated Valve & Accessories Part No. Product Description Price W Series Automated Valve including weather cover and lock ring W Series Automated Valve Almond Weather Cover W Series Automated Valve Lock Ring The WSA Valve is designed to direct and regulate all the cycles necessary for the day to day operation of the Micron W300mkII filter. User friendly digital display and programming. Solid state microprocessor with easy access front panel settings. Stores system configuration and operation data in nonvolatile memory. Optimum service and backwash rates. Modular design with no screws to lose. Inlet / Outlet 25mm (1 ) Minimum / Maximum Operating Pressures 1.38 Bar (20 psi) Bar (125 psi) Minimum / Maximum Operating Temperatures 6000 hrs Current Draw and Voltage 0.5A v 118

119 Purification Systems - Point of Use COMMANDOMATIC TCF HOUSING 6 Bar /87 psi Part No. Product Description Price Polypropylene Housing for Cartridge and/or Granular Filtration Purposes. Filter supplied with both 1½ imperial & 50mm metric quick connect unions EU C25 TCF (empty) EU C50 TCF (empty) EU C75 TCF (empty) COMMANDOMATIC TCF COMPLETE UNITS - 6 Bar Part No. Product Description Price EU EU EU C25 Cartridge Filter c/w 30 micron cartridge C50 Cartridge Filter c/w 30 micron cartridge C75 Cartridge Filter c/w 30 micron cartridge TCF Compact Filter is a compact and economical Cartridge Filter built with an easy to use lock ring system for simple cartridge removal and replacement. Easy to read pressure gauge. Non-corrosive, non-sticking air relief valve. Easy to operate. Moulded glass filled PP lid with quick loading nut for easy hand operation. Inbuilt automatic air bleed. High impact polypropylene body. 50mm / 1½ connections Model Height (mm) Width (mm) Tank Diameter (mm) C C C Commandomatic TCF Cartridges Part No. Product Description Price Pleated Polyester Filter Cartridges C25 1 micron cartridge C25 30 micron cartridge C50 5 micron Cartridge C75 5 micron Cartridge C50 10 micron Cartridge C75 10 micron Cartridge C50 20 micron Cartridge C75 20 micron Cartridge C50 30 micron Cartridge C75 30 micron Cartridge The pleated filter cartridge is constructed from heavy duty, easy-to-clean polyester fabric. The Cartridge s pleats allow for more surface area and a lower pressure loss compared to depth type filter cartridges Model Max. Flow Cartridge Micron Maximum Pressure Surface Area Cartridge Cartridge Rate Ratings Drop Length Diameter C25 5.7m³/hr 5, 10, 20, Bar / 2.9 psi 2.3m²(25ft²) 240mm 185mm C m 3 /hr 5, 10, 20, Bar / 2.9 psi 4.6 m 2 (50 ft 2 ) 490mm 185mm C m 3 /hr 5, 10, 20, Bar / 2.9 psi 6.9 m 2 (75 ft 2 ) 740mm 185mm 119

120 Purification Systems - Point of Use TCF Granular Media Cartridge Components Part No. Product Description Price Trimline Bottle (c/w slots) 12 litre capacity Trimline Bottle (w/o slots) 12 litre capacity TCF sealing washer W02046 TCF cartridge spacer TCF cartridge spacer O ring TCF Granular Media Pre-Filter Cartridges C25 5 micron Cartridge C25 10 micron Cartridge C25 20 micron Cartridge C25 30 micron Cartridge TCF75 TCF50 Trimline Bottle W/O Slots Trimline Bottle C/W Slots Pleated Filter Cartridges The Pleated Filter Cartridges are fabricated from pleated reusable polyester fabric. The media has been pleated to provide 2.3 to 6.9 square metres of surface area in order to maximise the cartridge dirt holding capacity and extend the time between cleaning. Material : Polyester Fabric material, Vinyl Plastisol end caps, Polypropylene core Operating Temperature : 4ºC to 50ºC Maximum Pressure Drop : 0.2 bar / 2.9 psi Granular Media Cartridges The granular media cartridges are able to house 12 litres of filter media and are designed to allow water to enter via the top of the cartridge and flow through the full height of the filter bed before exiting at the bottom of the cartridge. 120

121 Purification Systems - Point of Use SLIMLINE FILTER Part No. Product Description Price Slimline CC25 Filter (empty) Slimline CC25 Filter c/w 30 micron cartridge element 4 Bar AF1060 Filter stand for Slimline Filter Cartridge 30 Micron Slimline Filter Cartridge 5 Micron The Slimline takes up a mere 250cm 2 of valuable floor space. Not only is it smart in design, the lock ring lid makes cartridge removal and replacement so easy. No additional tools are needed. Air Release Valve Pressure Gauge The Slimline takes up a mere 250 cm 2 of valuable floor space. Not only is it smart on design. The lock ring lid makes cartridge removal and replacement so easy. No additional tools are needed. Easy-to-use Lid Lock Ring - Requires no additional tools Polypropylene Filter Body - Corrosion proof, lightweight Filter Base - stable, easy to install Slimline Filter Cartridge Constructed of long-lasting and reusable polyester fabric. Has multiple compact pleats providing 2.3 metres of surface area - maximum dirt holding, reduces cleaning frequency. Dimensions (mm) Specifications Working Pressure Maximum Temperature : 4 bar / 58 psi : 40 C (100 F) 192 Tank Tank ports Lock Ring Element Pressure Drop Seals : Polypropylene : 25mm female BSP thread : Glass-filled polypropylene : Polyester fabric material, PU end caps, ABS core : 0.2 bar / 2.9psi : Niltrile rubber Micron Rating 5, 30 Diameter 127mm Max. Flow 5.7m 3 /hr Tank Ports 25mm BSP thread Surface Area 2.3m 2 Working Pressure 4 Bar Length 340mm Max. temperature 40 C (100 F)

122 Purification Systems - Point of Use COMMANDOMATIC TBF HOUSING 6 Bar / 87psi Part No. Product Description Price Polypropylene Housing for Bag Filtration EU C50 TBF Housing EU C75 TBF Housing TBF housings are constructed from high impact polypropylene to be compatible with a wide range of fluids and its ergonomic screw down lid is designed for simple hand operation allowing for a quick filter changeover. Ideal as a coarse pre-filter / leaf trapper Disposable filter bags One piece mould construction Able to withstand up to 6 Bar / 600kPa / 87 psi Pressure gauge Ergonomic Lid High impact polypropylene body Internal 2 BSP thread Air Release Valve 50/63mm 1½ /2 Half Union Stable Mounting Feet Model Max. Flow Rate Required Clearance for Servicing Max. Pressure Max. Temperature C m 3 /hr 530mm / Bar 40 o C / 100 o F C m 3 /hr 770mm / Bar 40 o C / 100 o F Model A B C D E F G C50 710mm 665mm 620mm 71mm 263mm 278.5mm 402mm C75 960mm 915mm 870mm 71mm 263mm 278.5mm 402mm F G D C E B A TBF POLYPROPYLENE FILTER BAGS Part No. Product Description Price For C Micron Filter Bag Micron Filter Bag Micron Filter Bag Micron Filter Bag Micron Filter Bag For C Micron Filter Bag Micron Filter Bag Micron Filter Bag Micron Filter Bag Micron Filter Bag Filter Bag Specifications C50 C75 Material Polyester* Polyester* Specific Gravity Abrasion & Flex Very Good Very Good Weak Acids Excellent Excellent Strong Acids Excellent Excellent Weak Alkali Excellent Excellent Strong Alkali Excellent Excellent Solvents Fair Fair Filter Bag Dimensions C50 C75 Surface Area 0.17m 2 / 1.85ft m 2 / 2.9ft 2 Diameter 178mm / 7 178mm / 7 Length 419mm / mm /