Material Safety Data Sheet

Transcription

1 Product name Supplier Synonym Trade name Material uses Manufacturer Code MSDS # Validation date Print date In case of emergency Material Safety Data Sheet Daily Disinfect (Diluted 1 64) 1. Product and company identification Product type Signal word Hazard statements Daily Disinfect (Diluted 1 64) Betco Corporation 1001 Brown Avenue Toledo, Ohio (800) Betco Corporation 1001 Brown Avenue Toledo, Ohio Chemtrec (800) Liquid. 2. Hazards identification Emergency overview Physical state Color Odor Precautionary measures Routes of entry Potential acute health effects Inhalation Ingestion Skin Eyes Liquid. Yellow. [Light] Lemonlike. [Slight] NOT EXPECTED TO PRODUCE SIGNIFICANT ADVERSE HEALTH EFFECTS WHEN THE RECOMMENDED INSTRUCTIONS FOR USE ARE FOLLOWED. Eye contact. Ingestion. No known significant effects or critical hazards. No known significant effects or critical hazards. No known significant effects or critical hazards. No known significant effects or critical hazards. Potential chronic health effects Chronic effects No known significant effects or critical hazards. Carcinogenicity Mutagenicity Teratogenicity Developmental effects Fertility effects Target organs Overexposure signs/symptoms Inhalation Ingestion Skin No known significant effects or critical hazards. No known significant effects or critical hazards. No known significant effects or critical hazards. No known significant effects or critical hazards. No known significant effects or critical hazards. Not determined. Not determined. Not determined. 1/8

2 Daily Disinfect (Diluted 1 64) 2. Hazards identification Eyes Medical conditions aggravated by overexposure Not determined. None known. See toxicological information (Section 11) 3. Composition/information on ingredients There are no ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section. 4. First aid measures Eye contact Skin contact Inhalation Ingestion Protection of firstaiders Notes to physician 5. Firefighting measures Flammability of the product Extinguishing media Suitable Not suitable Special exposure hazards Hazardous thermal decomposition products Special protective equipment for firefighters Special remarks on fire hazards Special remarks on explosion hazards Get medical attention if symptoms occur. In case of contact with eyes, rinse immediately with plenty of water. Wash clothing before reuse. Clean shoes thoroughly before reuse. Seek medical attention if symptoms persist. Move exposed person to fresh air. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention if symptoms occur. Wash out mouth with water. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention if symptoms occur. No action shall be taken involving any personal risk or without suitable training. No specific treatment. Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled. In a fire or if heated, a pressure increase will occur and the container may burst. Use an extinguishing agent suitable for the surrounding fire. None known. Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. No specific data. Firefighters should wear appropriate protective equipment and selfcontained breathing apparatus (SCBA) with a full facepiece operated in positive pressure mode. 6. Accidental release measures Personal precautions Environmental precautions No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Put on appropriate personal protective equipment (see Section 8). Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). 2/8

3 Daily Disinfect (Diluted 1 64) 6. Accidental release measures Methods for cleaning up Small spill Large spill 7. Handling and storage Handling Storage Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if watersoluble. Alternatively, or if waterinsoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor. Stop leak if without risk. Move containers from spill area. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with noncombustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see section 13). Dispose of via a licensed waste disposal contractor. Note see section 1 for emergency contact information and section 13 for waste disposal. Put on appropriate personal protective equipment (see Section 8). Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and wellventilated area, away from incompatible materials (see section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. 8. Exposure controls/personal protection Occupational exposure limits No exposure limit value known. Consult local authorities for acceptable exposure limits. Recommended monitoring procedures Engineering measures Hygiene measures Personal protection Respiratory Hands Eyes If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. No special ventilation requirements. Good general ventilation should be sufficient to control worker exposure to airborne contaminants. If this product contains ingredients with exposure limits, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure below any recommended or statutory limits. Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location. Use a properly fitted, airpurifying or airfed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Chemicalresistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. <1 hours (breakthrough time) disposable vinyl Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists or dusts. Recommended safety glasses 3/8

4 Daily Disinfect (Diluted 1 64) 8. Exposure controls/personal protection Skin Environmental exposure controls Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels. Other protection Personal protective equipment (Pictograms) 9. Physical and chemical properties Physical state Flash point Burning time Burning rate Autoignition temperature Flammable limits Color Odor Taste Molecular weight Molecular formula ph Boiling/condensation point Melting/freezing point Critical temperature Relative density Vapor pressure Vapor density Volatility Odor threshold Evaporation rate SADT Viscosity Ionicity (in water) Dispersibility properties Solubility Physical/chemical properties comments Liquid. Closed cup Not applicable. [Product does not sustain combustion.] Not applicable. Not applicable. Yellow. [Light] Lemonlike. [Slight] Not applicable. Not applicable. 7.2 to Easily dispersible in the following materials cold water and hot water. Easily soluble in the following materials cold water and hot water. 4/8

5 Daily Disinfect (Diluted 1 64) 10. Stability and reactivity Chemical stability Conditions to avoid Incompatible materials Hazardous decomposition products Possibility of hazardous reactions The product is stable. No specific data. No specific data. Under normal conditions of storage and use, hazardous decomposition products should not be produced. Under normal conditions of storage and use, hazardous reactions will not occur. 11. Toxicological information Acute toxicity Chronic toxicity Irritation/Corrosion Sensitizer Carcinogenicity Classification Mutagenicity Teratogenicity Reproductive toxicity Synergistic products 5/8

6 Daily Disinfect (Diluted 1 64) 12. Ecological information Ecotoxicity No known significant effects or critical hazards. Aquatic ecotoxicity Persistence/degradability Partition coefficient n octanol/water Bioconcentration factor Mobility Toxicity of the products of biodegradation Other adverse effects Waste disposal Waste stream 13. Disposal considerations No known significant effects or critical hazards. The generation of waste should be avoided or minimized wherever possible. Significant quantities of waste product residues should not be disposed of via the foul sewer but processed in a suitable effluent treatment plant. Dispose of surplus and nonrecyclable products via a licensed waste disposal contractor. Disposal of this product, solutions and any byproducts should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Empty containers or liners may retain some product residues. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. RCRA classification Disposal should be in accordance with applicable regional, national and local laws and regulations. Refer to Section 7 HANDLING AND STORAGE and Section 8 EXPOSURE CONTROLS/PERSONAL PROTECTION for additional handling information and protection of employees. 14. Transport information Regulatory information UN number Proper shipping name Classes PG* Label Additional information DOT Classification TDG Classification Not Mexico Classification ADR/RID Class Not IMDG Class Not IATADGR Class Not PG* Packing group Not Not 6/8

7 Daily Disinfect (Diluted 1 64) 15. Regulatory information United States inventory (TSCA 8b) WHMIS (Canada) Canadian lists Canadian NPRI CEPA Toxic substances Canada inventory International regulations International lists Not determined. Not controlled under WHMIS (Canada). None of the components are listed. None of the components are listed. Not determined. This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all the information required by the Controlled Products Regulations. Chemical Weapons Convention List Schedule I Chemicals Chemical Weapons Convention List Schedule II Chemicals Chemical Weapons Convention List Schedule III Chemicals 16. Other information Australia inventory (AICS) Not determined. China inventory (IECSC) Not determined. Japan inventory Not determined. Korea inventory Not determined. New Zealand Inventory of Chemicals (NZIoC) Not determined. Philippines inventory (PICCS) Not determined. Not listed Not listed Not listed Label requirements Hazardous Material Information System (U.S.A.) NOT EXPECTED TO PRODUCE SIGNIFICANT ADVERSE HEALTH EFFECTS WHEN THE RECOMMENDED INSTRUCTIONS FOR USE ARE FOLLOWED. Health Flammability Physical hazards Caution HMIS ratings are based on a 04 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks Although HMIS ratings are not required on MSDSs under 29 CFR , the preparer may choose to provide them. HMIS ratings are to be used with a fully implemented HMIS program. HMIS is a registered mark of the National Paint & Coatings Association (NPCA). HMIS materials may be purchased exclusively from J. J. Keller (800) The customer is responsible for determining the PPE code for this material. References Other special considerations Date of printing Date of issue Date of previous issue Version Prepared by No previous validation /8

8 Daily Disinfect (Diluted 1 64) 16. Other information Indicates information that has changed from previously issued version. Notice to reader To the best of our knowledge, the information contained herein is accurate. However, neither the abovenamed supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. 8/8