Date: May Product and Supplier Description Trade Name: INCI: Supplier:

Transcription

1 Material Safety Data Sheet WHITE POPPY SEED OIL Date: May Product and Supplier Description Trade Name: White Poppy Seed Oil INCI: Papaver Somniferum Seed Oil Supplier: Aromantic Ltd 17 Tytler Street Forres Moray IV36 1EL Tel: Fax: CAS number: EINECS number: Relevant identified uses of the substance or mixture and uses advised against Use of substance / mixture: Cosmetics, Pharmaceuticals. 2. Hazards Identification 2.1. Classification of the substance or mixture Classification under CHIP: Not classified for supply. Classification under CLP: Not classified for supply Label elements Label Elements under CLP: This product has no label elements under CLP as it is not classified Other hazards PBT: This substance is not identified as a PBT substance. 3. Composition and Ingredient Information 3.1. Substances INCI: Papaver Somniferum Seed Oil 1

2 4. First Aid Measures 4.1. Description of first aid measures Skin contact: Wash immediately with plenty of soap and water. Eye contact: Bathe the eye with running water for 15 minutes. Ingestion: Give half a litre of water, oils are generally edible Inhalation: No Vapours generated under normal handling conditions Most important symptoms and effects, both acute and delayed In some cases of exposure, the following symptoms may be observed: Skin contact: Not Applicable Eye contact: Not Applicable Ingestion: Not Applicable Inhalation: Not applicable 4.3. Indication of any immediate medical attention and special treatment needed Skin contact: Not applicable. Eye contact: Not applicable. Ingestion: Not applicable. Inhalation: Not applicable. 5. Fire Fighting Measures 5.1. Extinguishing media Extinguishing media: Carbon dioxide. Alcohol or polymer foam. Dry chemical powder Special hazards arising from the substance or mixture Exposure hazards: Formation of carbon monoxide is possible Advice for fire-fighters Advice for fire-fighters: Wear suitable respiratory protection. 6. Measures in case of accidental release 6.1. Personal precautions, protective equipment and emergency procedures Personal precautions: Refer to section 8 of MSDS for personal protection details Environmental precautions Environmental precautions: Contain the spillage using bunding. Do not discharge into drains or rivers Methods and material for containment and cleaning up Clean-up procedures: Absorb into dry earth or sand. Transfer to a suitable container. Wash the spillage site with large amounts of water Reference to other sections 7. Handling and Storage 7.1. Precautions for safe handling Handling requirements: Handle with care as spillage causes slipping hazard Conditions for safe storage, including any incompatibilities Storage conditions: Store in cool, well ventilated area. 2

3 Keep container tightly closed. Suitable packaging: Must only be kept in original packaging Specific end use(s) Not applicable 8. Exposure Controls/Personal Protection 8.1. Control parameters Workplace exposure limits: Not applicable Exposure controls Engineering measures: Ensure there is sufficient ventilation of the area. Respiratory protection: In case of aerosol formulation, use dust mask filter. Hand protection: No special measures under normal conditions. Eye protection: Safety goggles. Skin protection: No special measures under normal conditions. 9. Physical and Chemical Properties 9.1. Information on basic physical and chemical properties State: Liquid mass. Colour: Yellow/Amber Odour: - Solubility in water: Insoluble. Soluble in: Vegetable Oils. Melting Point: - Relative Density at 25 C: Flash Point: Other information 10. Stability and Reactivity Reactivity Not applicable Chemical stability Chemical stability: Stable under normal conditions Possibility of hazardous reactions Conditions to avoid Conditions to avoid: Oxidation promoting conditions Incompatible materials Incompatible materials: Pro-Oxidants Hazardous decomposition products Haz. decomp. products: None. 11. Toxicological Information Information on toxicological effects Toxicity values: N/A Symptoms / routes of exposure 3

4 Not applicable. 12. Ecological Information Toxicity Not data available Persistence and degradability Persistence and degradability: Substantially biodegradable in convention Bioaccumulative potential Not data available Mobility in soil Mobility: Floats on water. Immobilises by absorption to soil particles Results of PBT and vpvb assessment PBT identification: This substance is not identified as a PBT substance Other adverse effects Presents no ozone depletion potential and is CO2 neutral. 13. Disposal Considerations Waste treatment methods Disposal operations: Must be disposed of in accordance with local and national regulations. Disposal of packaging: Dispose of as normal industrial waste. NB: The user's attention is drawn to the possible existence of regional or national regulations regarding disposal. 14. Transport Information UN number UN number: Not classified for transport UN proper shipping name UN proper shipping name: Not applicable Transport hazard class(es) Transport hazard class: Not applicable Packing group Packing group: Not applicable Environmental hazards Environmental hazards: Not classified as environmentally hazardous according to UN Model Regulations (IMDG, ADR, RID and ADN) Special precautions for user Disposal operations: Must be disposed of in accordance with local and national regulations Transport in bulk according to Annex II of MARPOL73/78 and the IBC code Transport in bulk: Product will not be transported in bulk. 15. Regulatory Information Safety, health and environmental regulations/legislation specific for the substance or mixture 4

5 15.2. Chemical Safety Assessment Chemical safety assessment: A chemical safety assessment has not been carried out for the substance or the mixture by the supplier. 16. Other Information Other information Other information: This safety data sheet is prepared in accordance with Commission Regulation (EU) No 453/2010. The information contained herein is accurate to the best of our knowledge from a variety of sources. No liability can be accepted arising out of the use, application or processing of this product. It is the users responsibility to determine the safe conditions for use of this product. 5