EP and IJ printer (PCR-ID:AD-04)

Transcription

1 Form 1(F-01s-02) EP and IJ printer (PCR-ID:AD-04) No. AD-14-E534 Date of publication 12/12/2014 Marking technologies : Electrophotographic Printer (EP) Printing speed : 27 prints-per-minute(a4, B/W), Please direct any inquiries 27 prints-per-minute(a4, color) or comments to Maximum copy paper : A4 Regulatory_Compliance@Dell.com Duplex (standard) Consumption and discharge in a life cycle All the stage sum totals Global Warming ( CO 2 equivalent) 1,048 kg (871.4 kg) Acidification ( SO 2 equivalent) 1.89 kg (1.485 kg) Energy resources 20,818 MJ ( crude oil equivalent) (16,818 MJ) Figures in ( ) indicated environmental impact including recycle effect *note3 Warming load CO2 equivalent of each stage[kg] 1, Direct Effect 859 Recycle Effect 400 Total of 437,400 sheets on the assumption of five years usage. Environmental impact by copypaper is not included (200) 145 Raw material Product Use Disposition s: 1. Original LCA data is available on PEIDS: Product Environmental Information Declaration Sheet, and Product Data Sheet. 2. Unified rules and requirements for EcoLeaf LCA, for intended product category, are available as a PSC: Product Specification Criteria. Visit EcoLeaf website under JEMAI homepage at for details. 3. Recycle Effect illustrates an indirect influence to other products/services. 4. Basic Units used for calculations are based on Japan domestic data at this time, due to a lack of base data to establish localized Basic Unit for overseas locations adequately. 5. This declaration was produced using Product Category Rule intended for a product model sold in the Japanese market and using the qualitative and quantitative data collected in Japan. [Supplemental environmental information] Certified Environmental Standards - RAL-UZ 171 (Blue Angel) - International Energy Star Program PCR review was conducted by: PCR Deliberation Committee, January 01, 2008, Name of reprentative: Youji Uchiyama, University of Tsukuba, Graduate School Independent verification of the declaration and data, according to ISO14025:2006 internal external Third party verifier: Keiichi Aramaki Programme operator: Japan Environmental Management Association for Industry, ecoleaf@jemai.or.jp * In the case of an business entity certified as an Ecoleaf-data-collection system, the names of certification auditors are written. The EcoLeaf is an environmental labeling program that belongs to the ISO-Type Ⅲ category.

2 Form 2-B(F-02Bs-02) Product Environmental Information Data Sheet (PEIDS) Document control no. Product vendor EcoLeaf registration no. F-02Bs-02 Fuji Xerox Co.,Ltd. AD-14-E534 Unit Function DB version v2.1 v2.1 Characterization Factor DB version v2.1 PCR name PCR code EP and IJ printer Product type Dell Colour Printer - C2660dn AD-04 Product weight 25.6 Package 4.8 Weight total 30.4 Life Cycle Stage Production Unit In/Out items Raw material Product Inventory anaiyses Impact assessment Impact by Resource Consumption Impact by Emission/Discharge to th he environment by Res by Emission / Discharge to environment Exhaustible resources to Water system Energy Consumption MJ 2.74E E E E E E+03 Mcal 6.54E E E E E E+02 Coal kg 1.80E E E E E E+01 Crude oil (for fuel) kg 2.65E E E E E E+01 LNG kg 5.53E E E E E E+00 Uranium content of an ore kg 4.43E E E E E E-04 Crude oil (for material) kg 1.16E E E E+01 Iron content of an ore kg 9.13E E E+00 Cu content of an ore kg 5.27E E E-01 Al content of an ore kg 1.08E E E+00 Ni content of an ore kg 3.48E E E-04 C content of an ore kg 4.74E E E-03 Mn content of an ore kg 9.97E E E E-02 Pb content of an ore kg 2.94E E E-02 Sn content of an ore kg Zn content of an ore kg 2.89E E E-01 Au content of an ore kg Ag content of an ore kg Silica Sand kg 6.45E E E E-01 Halite kg 5.01E E E E-01 Limestone kg 2.44E E E E+00 Natural soda ash kg 5.09E E Wood kg 7.99E E E E+01 Water kg 1.23E E E E E E+03 CO2 kg 1.42E E E E E E+02 Sox kg 1.26E E E E E E-01 Nox kg 1.98E E E E E E-01 N2O kg 1.40E E E E E E-02 CH4 kg 1.16E E E E E E-04 Renewable resources to Atm mosphere to Soil system Exhaustible resources to Atmosphere to W ater s y s tem Energy resources Mineral resources to Water domain Use Disposition Recycle Effect CO kg 2.52E E E E E E-02 NMVOC kg 2.28E E E E E E-04 CxHy kg 6.38E E E E E E-02 Dust kg 2.18E E E E E E-02 BOD kg COD kg N total kg P total kg SS kg Unspecified Solid Waste kg 1.92E E E E E E+00 Slag kg 3.67E E E E+00 Sludge kg 2.16E E E+00 Low level radio-active waste kg 3.10E E E E E E-04 Energy resources (crude oil equivalent) kg 4.83E E E E E E+01 Mineral resources (Iron ore equivalent) kg 4.21E E E E E+02 Global Warming (CO2 equivalent) kg 1.45E E E E E E+02 Acidification (SO2 equivalent) kg 2.64E E E E E E-01 Ozone Depletion (CFC-11 equivalent) kg Photochemical Oxidant kg 1.24E E E E E E-02 Eutrophication (Phosphate equivalent) kg [s for readers: EcoLeaf common rules] I. Stage related A. "Production" stage is intended for two sub-stages listed below. (1) "Raw material" production: consists of mining, transportation and raw material production. (2)"Product" production: consists of the parts processing, assembly and installation. B. "" stage is intended for transportation of produced product. Transportation of consumables and maintenance goods (e.g. replacement parts) for use of the product are included into "Use" stage. C. "Use" stage is intended for use of the product (active mode, standby mode, etc.) and production, transportation to disposal/recycle of consumables/maintenance goods (e.g. replacement parts). D. "Disposition/Recycle" stage is intended for environmental impacts by product disposition/recycle, and deduction by recycling (e.g. impact reduction of raw material production). E. "Recycle Effect" illustrates an indirect environmental influences to other products/services by use of reclaimed materials/parts, and/or by supply of used products to other businesses for material reclaim/parts reuse. Case 1: Use of reclaimed materials/parts: Sum of increase of environmental impact by collection activities of used materials/parts, and decrease by volume reduction of used materials/parts. Case 2: Supply of used products to other businesses for material reclaim/parts reuse: Sum of increase of environmental impact by materials/parts reclaiming process, and decrease by volume reduction of new materials/parts production. II. Inventory analyses A. Data of mineral ore on "Exhaustible resources" are presented in weight of pure ingredients (e.g. iron, aluminum) in the ore. B. Data on energy resources are presented based on origin in calorific value. e.g. Data on uranium ore presents weight of uranium concentrate, which is available for use as an atomic fuel. C. Data of discharge to water system are in actual figure (not calculated using unit function in inventory analyses). III Impact analyses Result of the "Impact analyses" is found in converting results of inventory analyses into total amount of a reference material (e.g. CO 2 in case of "Global Warming"). A. Impact "by resource consumption" represents magnitude of impacts to resource depletion. B. Impact "by emission/discharge to environment" represents magnitude of impacts to Atmosphere, Water and Soil system. IV Data entry format A. Exponential notation, after the decimal point to two, should be used. B. Indicate "0" instead exponential notation, if the result of calculation or estimation is considered as "zero" or negligible in comparison to related results. C. Indicate " - " if calculation nor estimation can not be done, in order to differentiate to indicate "zero".

3 (BGD for material production are for production from mineral ore. Those data do not include reclaiming processes like recovery from scrap.) [s for readers: Target product specific] A. Raw material in "Production" includes environmental impacts generated during mining - transportation - material production phases of the main body B. " Product" in "production" includes environmental impacts of processing of the parts (injection, blow-, press- and glass-molding). C. Regarding the basis and the basic units for calculations during distribution stages D. Regarding the basis and the basic units for calculations during use and consumption stage E. The recycling impacts are calculated assuming that 40% of the end-of-life printers are recovered from users according to PCR (AD-04). F. The impacts of materilal production of recycled materials are included in the values with minus as a recycling effect. G. This declaration was produced using Product Category Rule intended for a product model sold in the Japanese market and using the qualitative and quantitative data collected in Japan.

4 Form 3(F-03s-02) Document control no. Product vendor EcoLEaf registration no. Product data sheet (Input data and parameters for LCA) F-03s-02 Fuji Xerox Co.,Ltd. AD-14-E Product information (per unit): parts etc. by material and by process/assembly method Breakdown of primary materials Math breakdown of parts, which need to apply Processing / Assembly Base Units (Parts B, C) Material name Weight Material name Weight Process name Weight Process name Weight Normal steel 7.23E+00 paper 3.74E+00 Press molding:iron 9.27E+00 Parts assembly 2.32E+01 Stainless steel 2.20E+00 semiconductor substrates 1.06E+00 Press molding:nonferrous metal 1.51E+00 aluminum 9.54E-01 medium-sized motor 8.34E-01 Injection molding 1.33E+01 other metals 7.18E-01 Glass molding 2.94E-01 thermoplastic resins 1.19E+01 thermosetting resins 1.17E+00 rubber 2.77E-01 glass 2.94E-01 Subtotal 2.48E+01 Subtotal 5.64E+00 Total 3.04E+01 Subtotal 2.43E+01 Subtotal 2.32E Production site information (per unit): Consumption and discharge/emission for production/processing/assembly within the site. SOx and NOx should be indicated in SO 2, NO 2 equivalent. PCR name EP and IJ printer (PCR-ID : AD-04) Product type Dell Colour Printer - C2660dn LCA/LCIA in units of: 1 product Product weight 25.6 Package 4.8 Weight total 30.4 ion Consumption Product e r g a h c is D / n io s is m E Classification Energy Material Energy Energy Material Electricity (kwh) Clean water LPG Urban gas (13A) (m3) Industrial water Quantity 1.51E E E E E+02 Classification Quantity 3. stage information (per unit): means, distance, loading ratio, consumptions and emissions/discharges. Distributi Means of Freight by ship Freight by ship Freight by ship Freight by ship transportation Conditions Mass Distance(km) Loading Ratio(%w) Load Mass Distance(km) Loading Ratio(%w) Load Quantity 3.10E E E E E E E E+04 Means of Consumption Consumption Consumption Consumption transportation Loading High density Low density Conditions Mass Distance(km) Load(kg km) Cardboard Ratio(%w) cardboard polyethylene polyethylene Quantity 3.10E E E E E E E E Use stage (per unit): use condition (mode, term) including active mode, standby mode and maintenance. 4.1 Product and accessories subject to this analysis Product Means of transportation Conditions Electroplated Stainless steel Press molding: Polypropylene Polycarbonate Electricity (kwh) Copper plate PET steel Plate plate Iron Quantity 1.98E E E E E E E E-01 POM Assembled circuit Unsaturated Phenol resin Parts assembly PA66 ABS Furnace LNG (polyacetal) board polyester (PF) (Polyamide 66) Quantity 3.08E E E E E E E E-01 Press molding: Nitrile-butadiene Furnace urban Industrial water Polycarbonate- Cold-Rolled steel Nonferrous metal Polystyrene rubber gas (13A) (m3) ABS (70/30) plate (NBR) Quantity 6.21E E E E E E E E Disposition/Recycle information on consumables and replacement parts Classification Consumption Consumption Consumption Consumption Consumption Consumption Deduction Consumption Sorting: Iron Incineration: Incineration to Landfill: Shredding (by magnetic Biomass (paper) landfill General waste 4 ton cardboard force) (as ash) cardboard Quantity 1.10E E E E E E E E+01 cardboard Expandable hard polyurethane (Hard) Low density polyethylene Injection molding Paper (Western style) Clean water 10 ton (kg km) Freight by ship (kg km) Quantity 2.70E E E E E E E E+05 Process cardboard Process pellet Quantity 3.04E E-01

5 Consumables 5. Disposition/Recycle stage information (per product): process method and scenarios Scenario Classification Deduction Deduction Deduction Deduction Consumption Consumption Consumption Consumption Classification Consumption Consumption Consumption Consumption Consumption Consumption Deduction Consumption Sorting: Iron Incineration: Incineration to Landfill: Shredding (by magnetic force) Biomass (paper) landfill General waste 4 ton cardboard (as ash) cardboard Quantity 2.94E E E E E E E E+00 Classification Deduction Deduction Deduction Deduction Consumption Consumption Consumption Consumption Cold-Rolled steel plate Copper plate ABS to cold-rolled steel Sorting: Nonferrous metal (by eddy current with wind force) to to copper plate Quantity 3.94E E E E E E E E-01 Classification Consumption Consumption Consumption Consumption Sorting: Plastics (by relative density difference pellet in water) Incineration: Landfill: Quantity 5.68E E E E-01 Cold-Rolled steel plate Copper plate ABS to cold-rolled steel Sorting: Nonferrous metal (by eddy current with wind force) to to copper plate Quantity 4.47E E E E E E E E-01 Classification Consumption Consumption Consumption Consumption Sorting: Plastics (by relative density difference in water) pellet Incineration: Landfill: Quantity 2.75E E E E Others A. Product information: All the parts mass per unit sorted by materials and by processes/assembly are included. The motor mass is included in common parts. B. Production site information: The energy consumption & material use during the main body assemby and cartridge & toner shipment are included. The environmental impacts that are exhausted from the production site in the atmosphere and the water system are included. C. stage information: The total distance of the transportation in Japan of 100km is used according to PCR (AD-04) and the transportation overseas includes the transportation by track in China and by ship between China and Japan. D. Product and accessories subject to this analysis: The power consumption is calculated assuming the use period of five years and 437,400 sheets printed during the use period according to the PCR (AD-04). The toner consumption is summed up over the five years from the toner consumption data per sheet using our print pattern with 5% coverage. The production impacts of the cartridges and toner used during the use period of five years are included. The impacts of the maintenance parts used and the transportation impacts of the maintenace during the use period of five years are included in this stage. E. Disposal/Recycle information on the consumables and the maintenance parts during use stage: The recycling information of the toner, the developer, the drums and the maintainance parts used during the use period of five years are included. The recycling processing impacts are included as plus and the production impacts of the recycled materials are included as minus. F. Disposal/Recycle stage information: The information on the products recovered from users is included. The recycling processing impacts are included as plus and the production impacts of the recycled materials are included as minus. G. This declaration was produced using Product Category Rule intended for a product model sold inthe Japanese market and using the qualitative and quantitative data collected in Japan.