LOFMEM-P series from Eaton are. a wide range of applications including: filtration of acids & bases, cosmetics, inks, chemicals, ultrapure

Size: px

Start display at page:

Download "LOFMEM-P series from Eaton are. a wide range of applications including: filtration of acids & bases, cosmetics, inks, chemicals, ultrapure"

Jack Farmer
5 years ago
Views:

LOFMEM-P series from Eaton are inherently hydrophilic, designed for a wide range of applications including: food & beverage, filtration of acids &

an economical solution for your filtration needs. Made of pleated polypropylene micro fiber, it provides high efficiency and high purity filtration.

With broad chemical compatibility high flow polypropylene membranes, these cartridges are capable of protecting your gas, air and liquid processes and

They come with excellent dirt holding capacities, reliable retention, and non-fiber releasing material.

Low pressure drop improve filtration efficiency and extend filter life.

All material of construction are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21.

Filter Specifications Media End Caps Filter Support Core Material Protector Gasket/O-Ring Options Silicone, Viton, Buna-N, EPDM, Teflon encapsulated

1 LOFMEM-P series from Eaton are inherently hydrophilic, designed for a wide range of applications including: food & beverage, filtration of acids & bases, cosmetics, inks, chemicals, ultrapure water and other aqueous solutions LOFMEM-P Series is a high efficiency pleated filter cartridge that offers an economical solution for your filtration needs. Made of pleated polypropylene micro fiber, it provides high efficiency and high purity filtration. Also, the 1% virgin polypropylene media provides high particle retention. With broad chemical compatibility high flow polypropylene membranes, these cartridges are capable of protecting your gas, air and liquid processes and are designed to meet the special needs of the electronics and high purity chemical and water industries with. They come with excellent dirt holding capacities, reliable retention, and non-fiber releasing material. Features and Benefits High surface area design provides excellent flow rates and life while maintaining high particle removal efficiency. Low pressure drop improve filtration efficiency and extend filter life. Strict quality control measures include rigorous testing for rinse up, shedding, flow rate and extractable levels. Integrity-tested and testable in situ. All material of construction are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21. Build-in pre-filter layer for long life and low filtration costs. High dirt holding capacity. Filter Specifications Media End Caps Filter Support Core Material Protector Gasket/O-Ring Options Silicone, Viton, Buna-N, EPDM, Teflon encapsulated Viton Micron Ratings.1μm,.2μm,.45μm, 1μm, 2μm, 3μm, 5μm, 1μm, 3μm, 4μm, 5μm, 7 μm Dimensions / Parameters Nominal Length inches(") 9.75" 1" 2" 3" 4" Other Customized Size Outside diameter 2.7 (6.9 cm) Inside diameter 1.1 (2.8 cm) Effective Filtration Area.62m² (6.7 ft²) per 1 inch Maximum Steam Temperature 14 C (284 F) Operating Temperature 8 C (176 F) Differential Pressure 4.8 bar at 2 C (7 psi at 68 F) 3.4 bar at 5 C (5 psi at 122 F) 1.8 bar at 9 C (2 psi at 194 F) Maximum replaceable pressure drop 2.4 bar (35 psi)

2 Filter Series LOFMEM - Asia ALM-P PP Material Nominal Length (Inches( )/mm) 1-1 /254mm 2-2 /58mm 3-3 /762mm 4-4 /116mm End Configuration DOE - Double Open End (hard end caps) 1-226/Flat Single Open End 2-222/Fin Single Open End 3-226/Fin Single Open End 4-222/Flat Single Open End Gasket Or O-ring S Silicone B Buna-N E EPDM V Viton T Teflon encapsulated Viton ALM-P DOE E Retention Rating (μm).5 micron.1 micron.2 micron.45 micron.65 micron 1 micron 2 micron 3 micron 5 micron 1 micron Bar Psi Membrane Media Filter Cartridge Single 1 element GPM Flow Rate LPM Eaton Filtration Shanghai. No.353 Riying Road North, W.G.Q F.T.Z,Pudong, Shanghai 2131 China Voice: Fax: Eaton Filtration Singapore 4 LOYANG LANE #4-1/2 SINGAPORE Voice: Fax: Eaton Filtration-Beijing A111, SK Tower Beijing, No.6, Jiawai Avenue, Chaoyang District, Beijing, China 122 Voice: ; Fax: Eaton Filtration Japan Uruma Kowa Bldg Akasaka Minato-ku, Tokyo Japan Voice: ; Fax: Eaton Filtration AUNZ 47 Holbeche Road, Arndell Park, NSW Australia Voice: ; Fax: Eaton Filtration Korea 7th Fl, Bethel B/D, 324-1, Yangjae-Dong, Seocho-Gu, Seoul , Korea Voice: ; Fax: Eaton Filtration India 122, Casablanca, CBD - Belapur, Sector-11, Maharastra, Navi, Mumbai , India Voice: ; Fax: Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. Litho USA Eaton Filtration Sdn. Bhd. - Malaysia office Unit 5.9 Wisma BICMA Lot 2, Jalan 51A/243, P.O. Box 418, 4675 Petaling Jaya, Selangor Malaysia Voice: ; Fax: Eaton Filtration Pte Ltd - Indonesia office Ariobimo Sentral 7th Floor, Jl. HR. Rasuna Said Blok X-2 Kav. 5, Jakarta 1295, Indonesia Voice: ; Fax: All information and recommendations appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the information herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.

LOFMEM-E series from Eaton are inherently hydrophilic and are designed for a wide range of applications including semiconductor, cosmetics and medical, pharmaceuticals,

provides superior flow rates and a unique polyethersulfone construction that features a high-surface area design which allows for high particle removal efficiency.

service life. It provides superior performance in most applications containing any adhesives or additives.

Features and Benefits High surface area design provides excellent flow rates and life while maintaining high particle removal efficiency.

Strict quality control measures include rigorous testing for rinse up, shedding, flow rate and extractable levels. Integrity-tested and testable in situ.

Built-in pre-filter layer for long life and low filtration costs. High dirt holding capacity.

3 LOFMEM-E series from Eaton are inherently hydrophilic and are designed for a wide range of applications including semiconductor, cosmetics and medical, pharmaceuticals, ultrapure chemicals & polishing stations, photoresists, solvents & ink, magnetic media, food & beverage, process water, bottled water and terminal water LOFMEM-E series provides superior flow rates and a unique polyethersulfone construction that features a high-surface area design which allows for high particle removal efficiency. These cartridge filters employ unique asymmetric polyethersulfone membranes that ensure consistent particle retention, low pressure drops at high flow rates, and exceptional service life. It provides superior performance in most applications containing any adhesives or additives. As part of the stringent manufacturing process, the LOFMEM-E filters are individually tested. Features and Benefits High surface area design provides excellent flow rates and life while maintaining high particle removal efficiency. Low pressure drops improve filtration efficiency and extend filter life. Strict quality control measures include rigorous testing for rinse up, shedding, flow rate and extractable levels. Integrity-tested and testable in situ. All materials of construction are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21. Built-in pre-filter layer for long life and low filtration costs. High dirt holding capacity. Filter Specifications Media Polyethersulfone End Caps Core Material Protector Gasket/O-Ring Options Silicone, Viton, Buna-N, EPDM, Teflon encapsulated Viton Micron Ratings.1μm,.2μm,.45μm,.6μm, 1μm Dimensions / Parameters Nominal Length inches(") 1" 2" 3" 4" Other Customized Size Outside diameter 2.7 (6.9 cm) Inside diameter 1.1 (2.8 cm) Effective Filtration Area.7m² (7.5 ft²) per 1 inch Maximum Steam Temperature 14 C (284 F) Operating Temperature 8 C (176 F) Differential Pressure 4.8 bar at 2 C (7 psi at 68 F) 3.4 bar at 5 C (5 psi at 122 F) 4.8 bar at 9 C (2 psi at 194 F) Maximum replaceable pressure drop 2.4 bar (35 psi)

4 Performance Specifications Hot DI Water Filter cartridge will withstand temperatures of 23 F (95 C) for up to 3 consecutive minutes. Chemical Compatibility Filter cartridge resists most acids and bases, ph 1 14 and most oxidizing agents. Sanitizing Agents Filter cartridge may be sanitized in place with common oxidizing agents. Steam/Autoclave Cartridges may be steamed or autoclaved for at least 5 one-hour 284 F (14 C). Bar.7 Psi 1 Polyethersulfone Membrane Media Filter Cartridge Single 1 element FDA Listed Materials All polypropylene material used in manufacturing complies with the regulations of the Food and Drug Administration (FDA) title 21 of the Code of Federal Regulations Sections 174.5, as applicable for food and beverage contact. Filter Specification Code Nominal Length (Inches( )/mm) 1-1 /254mm 2-2 /58mm 3-3 /762mm 4-4 /116mm GPM Flow Rate LPM Gasket Or O-ring S Silicone B Buna-N E EPDM V Viton T Teflon encapsulated Viton ALM-E DOE E The LOFMEM-PES filter is available with a variety of gasket, O-ring and end cap configurations. Filter Series LOFMEM -Asia ALM-E PES Material Retention Rating (μm).5 micron.1 micron.2 micron.45 micron.65 micron 1 micron 2 micron 3 micron 5 micron 1 micron End Configuration DOE - Double Open End (hard end caps) 1-226/Flat Single Open End 2-222/Fin Single Open End 3-226/Fin Single Open End 4-222/Flat Single Open End Eaton Filtration Shanghai. No.353 Riying Road North, W.G.Q F.T.Z,Pudong, Shanghai 2131 China Voice: Fax: Eaton Filtration Singapore 4 LOYANG LANE #4-1/2 SINGAPORE Voice: Fax: Eaton Filtration-Beijing A111, SK Tower Beijing, No.6, Jiawai Avenue, Chaoyang District, Beijing, China 122 Voice: ; Fax: Eaton Filtration Japan Uruma Kowa Bldg Akasaka Minato-ku, Tokyo Japan Voice: ; Fax: Eaton Filtration AUNZ 47 Holbeche Road, Arndell Park, NSW Australia Voice: ; Fax: Eaton Filtration Korea 7th Fl, Bethel B/D, 324-1, Yangjae-Dong, Seocho-Gu, Seoul , Korea Voice: ; Fax: Eaton Filtration India 122, Casablanca, CBD - Belapur, Sector-11, Maharastra, Navi, Mumbai , India Voice: ; Fax: For more information, please us at filtration@eaton.com, or call Visit us online at filtration.eaton.com for a complete list of Eaton s filtration products. Eaton Filtration Sdn. Bhd. - Malaysia office Unit 5.9 Wisma BICMA Lot 2, Jalan 51A/243, P.O. Box 418, 4675 Petaling Jaya, Selangor Malaysia Voice: ; Fax: Eaton Filtration Pte Ltd - Indonesia office Ariobimo Sentral 7th Floor, Jl. HR. Rasuna Said Blok X-2 Kav. 5, Jakarta 1295, Indonesia Voice: ; Fax: Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. Litho USA All information and recommendations appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the information herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.

LOFMEM-N from Eaton are inherently hydrophilic and are designed for a wide range of applications including: DI-RO treatment, semiconductor, ultrapure chemicals & polishing stations, photoresists &

& magnetic media, food & beverage, processed water, bottled water and terminal water LOFMEM-N Series provides wide system compatibility and absolute-rated efficiency, yielding the cleanest possible

Each cartridge module is also individually tested for integrity.

5 LOFMEM-N from Eaton are inherently hydrophilic and are designed for a wide range of applications including: DI-RO treatment, semiconductor, ultrapure chemicals & polishing stations, photoresists & solvents & ink, optical discs. & magnetic media, food & beverage, processed water, bottled water and terminal water LOFMEM-N Series provides wide system compatibility and absolute-rated efficiency, yielding the cleanest possible process fluids in a variety of semiconductor applications. The hydrophilic nylon membrane cartridges do not require pre-wetting and are ready to use. Each cartridge module is also individually tested for integrity. The design criteria and manufacturing procedures allow us to provide the highest quality electronic grade cartridges that are fit to meet the special needs of the electronics and high purity chemical industries. Features and Benefits High Filtering Efficiency Fixed pore construction eliminates dirt unloading as differential pressure increase and provides ultimate particle retention efficiency. Long life time use High surface area design provides superior flow rates and high dirt holding capacity extended service life. High degree of clean Advantage cartridges are non-fiber releasing, low extractable. Provides broad chemical compatibility Broad solvent compatibility; repeatedly steamable in situ; critical process fluid systems. High dirt holding capacity. Filter Specifications Media Nylon End Caps Core Material Protector Gasket/O-Ring Options Silicone, Viton, Buna-N, EPDM, Teflon encapsulated Viton Micron Ratings.1μm,.2μm,.45μm, 1μm Fiter Support Dimensions / Parameters Nominal Length inches(") 9.75" 1" 2" 3" 4" Other Customized Size Outside diameter 2.7 (6.9 cm) Inside diameter 1.1 (2.8 cm) Effective Filtration Area.67m² (7.2 ft²) per 1 inch Maximum Steam Temperature 14 C (284 F) Operating Temperature 11 C (23 F) Differential Pressure 4.8 bar at 5 C (7 psi at 122 F) 3.4 bar at 8 C (5 psi at 176 F) 4.8 bar at 11 C (2 psi at 23 F) Maximum replaceable pressure drop 2.4 bar (35 psi)

6 Filter Series LOFMEM -Asia ALM-N Nylon Material Nominal Length (Inches( )/mm) 1-1 /254mm 2-2 /58mm 3-3 /762mm 4-4 /116mm End Configuration DOE - Double Open End (hard end caps) 1-226/Flat Single Open End 2-222/Fin Single Open End 3-226/Fin Single Open End 4-222/Flat Single Open End Gasket Or O-ring S Silicone B Buna-N E EPDM V Viton T Teflon encapsulated Viton ALM-N DOE E Retention Rating (μm).5 micron.1 micron.2 micron.45 micron.65 micron 1 micron 2 micron 3 micron 5 micron 1 micron Bar Psi Nylon Membrane Media Filter Cartridge Single 1 element GPM LPM Flow Rate Eaton Filtration Shanghai. No.353 Riying Road North, W.G.Q F.T.Z,Pudong, Shanghai 2131 China Voice: Fax: Eaton Filtration Singapore 4 LOYANG LANE #4-1/2 SINGAPORE Voice: Fax: Eaton Filtration-Beijing A111, SK Tower Beijing, No.6, Jiawai Avenue, Chaoyang District, Beijing, China 122 Voice: ; Fax: Eaton Filtration Japan Uruma Kowa Bldg Akasaka Minato-ku, Tokyo Japan Voice: ; Fax: Eaton Filtration AUNZ 47 Holbeche Road, Arndell Park, NSW Australia Voice: ; Fax: Eaton Filtration Korea 7th Fl, Bethel B/D, 324-1, Yangjae-Dong, Seocho-Gu, Seoul , Korea Voice: ; Fax: Eaton Filtration India 122, Casablanca, CBD - Belapur, Sector-11, Maharastra, Navi, Mumbai , India Voice: ; Fax: Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. Litho USA Eaton Filtration Sdn. Bhd. - Malaysia office Unit 5.9 Wisma BICMA Lot 2, Jalan 51A/243, P.O. Box 418, 4675 Petaling Jaya, Selangor Malaysia Voice: ; Fax: Eaton Filtration Pte Ltd - Indonesia office Ariobimo Sentral 7th Floor, Jl. HR. Rasuna Said Blok X-2 Kav. 5, Jakarta 1295, Indonesia Voice: ; Fax: All information and recommendations appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the information herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.

LOFMEM-T from Eaton are designed to be ideal for gas/vent applications and the filtration of aggressive compounds.

photoresists, pharmaceutical intermediates, hot DI water and fermentation air LOFMEM-T series membrane filter cartridges perform at the

LOFMEM-T membrane manufacturing serves as a low-cost alternative to all fluoropolymer cartridges used in less aggressive applications

The LOFMEM-T Membrane Series is available in.5μm,.1μm,.2μm,.45μm and 1μm pore sizes.

Rinsed with 18 megohm-cm UHP water for high purity. Non-fiber releasing.

Narrow pore size distribution ensures the ultimate in retention and flow rate.

Available prewetted for immediate use in process.

Integrity-tested and testable in situ. Thermally welded, eliminating adhesive extractable.

7 LOFMEM-T from Eaton are designed to be ideal for gas/vent applications and the filtration of aggressive compounds. The cartridges are specially designed for filtration of hard line compounds such as strong acids & bases, compressed gases, photoresists, pharmaceutical intermediates, hot DI water and fermentation air LOFMEM-T series membrane filter cartridges perform at the highest flow rate to provide the cleanest fluids at the lowest possible cost. LOFMEM-T membrane manufacturing serves as a low-cost alternative to all fluoropolymer cartridges used in less aggressive applications and maintains broad chemical compatibility with low extractable levels and high particle retention rates. The LOFMEM-T Membrane Series is available in.5μm,.1μm,.2μm,.45μm and 1μm pore sizes. Features and Benefits High flow rates and optimized surface area reduce processing time and filter consumption. Rinsed with 18 megohm-cm UHP water for high purity. Non-fiber releasing. All-polypropylene component construction complemented by a variety of O-ring seals withstands demanding operating parameters. Narrow pore size distribution ensures the ultimate in retention and flow rate. Naturally hydrophobic membrane maintains air flow rates in venting and gas applications. Available prewetted for immediate use in process. Strict quality control measures include rigorous testing for rinse up, shedding, flow rate and extractable levels. Integrity-tested and testable in situ. Thermally welded, eliminating adhesive extractable. Biosafe in accordance with USP Class VI-121 Plastics Tests. Specifically designed to ensure cleanliness. Filter Specifications Media Hydrophobic PTFE End Cap Core /SS316 Stainless Steel Protector Gasket/O-Ring Options Silicone, Viton, Buna-N, EPDM, Teflon encapsulated Viton Micron Ratings.5μm.1μm.2μm.45μm 1.μm Dimensions / Parameters Typical Nominal lengths 9.75, 1, 2, 3, 4 (24.8, 25.4, 5.8, cm) Outside diameter 2.7 (6.9 cm) Inside diameter 1.1 (2.8 cm) Effective Filtration Area.8m² (8.1 ft²) Operating Temperature 9 C (194 F) Differential Pressure 4.8 bar at 2 C (7 psi at 68 F) 2.1 bar at 9 C (3 psi at 194 F) Maximum replaceable pressure drop 2.4 bar (35 psi)

8 Performance Specifications Steam/Autoclave Autoclave or in situ Steam : 121 C (25 F) for 3 minutes at 1. bar (15 psi) 7% IPA 1% Hydrogen Peroxide Integrity Test Values Air Diffusion per 1 inch cartridge wet with 6/4 IPA/ water. Contact Eaton for specific method. Pore Size Specification.5 μm: 5 22 psig (1.5 bar).1 μm: 5 18 psig (1.2 bar).2 μm: 2 12 psig (.8 bar).45 μm: 15 5 psig (.34 bar) 1. μm: 15 3 psig (.2 bar) Bar Psi PTFE Membrane Media Filter Cartridge Single 1 element GPM LPM Filter Specification Code Filter Series LOFMEM -Asia ALM-T PTFE Material Nominal Length (Inches( )/mm) 1-1 /254mm 2-2 /58mm 3-3 /762mm 4-4 /116mm Flow Rate Gasket Or O-ring S Silicone B- Buna-N E- EPDM V- Viton T- Teflon encapsulated Viton ALM-T DOE E Eaton Filtration Shanghai. No.353 Riying Road North, W.G.Q F.T.Z,Pudong, Shanghai 2131 China Voice: Fax: Eaton Filtration Japan Uruma Kowa Bldg Akasaka Minato-ku, Tokyo Japan Voice: ; Fax: Eaton Filtration Sdn. Bhd. - Malaysia office Unit 5.9 Wisma BICMA Lot 2, Jalan 51A/243, P.O. Box 418, 4675 Petaling Jaya, Selangor Malaysia Voice: ; Fax: Retention Rating (μm).5 micron.1 micron.2 micron.45 micron.65 micron 1 micron 2 micron 3 micron 5 micron 1 micron Eaton Filtration Singapore 4 LOYANG LANE #4-1/2 SINGAPORE Voice: Fax: Eaton Filtration AUNZ 47 Holbeche Road, Arndell Park, NSW Australia Voice: ; Fax: Eaton Filtration Pte Ltd - Indonesia office Ariobimo Sentral 7th Floor, Jl. HR. Rasuna Said Blok X-2 Kav. 5, Jakarta 1295, Indonesia Voice: ; Fax: Eaton Filtration-Beijing A111, SK Tower Beijing, No.6, Jiawai Avenue, Chaoyang District, Beijing, China 122 Voice: ; Fax: Eaton Filtration India 122, Casablanca, CBD - Belapur, Sector-11, Maharastra, Navi, Mumbai , India Voice: ; Fax: Eaton Filtration Korea 7th Fl, Bethel B/D, 324-1, Yangjae-Dong, Seocho-Gu, Seoul , Korea Voice: ; Fax: End Configuration DOE - Double Open End (hard end caps) 1-226/Flat Single Open End 2-222/Fin Single Open End 3-226/Fin Single Open End 4-222/Flat Single Open End For more information, please us at filtration@eaton.com, or call Visit us online at filtration.eaton.com for a complete list of Eaton s filtration products. All information and recommendations appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the information herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.

membranes and ECTFE core & cage can meet the most critical filtration requirements and in the most aggressive environments.

9 Eaton s AT cartride filters are ideal for gas/vent applications and the filtration of aggressive compounds. These cartridges are specially designed for usage in filtration of mixed acids, special chemicals, oxide water, photographic solvents These Eaton series cartridge filters, utilizing expanded PTFE membranes and ECTFE core & cage can meet the most critical filtration requirements and in the most aggressive environments. The advantage of LOFMEM-AT is that the PTFE membranes remain robust and durable while being used in highly corrosive acids, bases and organic compounds. Besides being hydrophilic, the PTFE membrane is non-dewetting before used and can be used in hard line applications with ease. Features and Benefits All fluorpolymer construction. Excellent chemical compatibility. High temperature and pressure capabilities. High Flow Rate. Low differential pressure. Low extractable ability. High particle removal efficiency. Manufactured in a cleanroom environment. 1% integrity test. Filter Specifications Media PTFE End Caps ECTFE Core Material ECTFE Filter Support ECTFE Gasket/O-Ring Options Teflon encapsulated Viton Micron Ratings.5μm.1μm.2μm.45μm 1.μm 5.μm Dimensions / Parameters Nominal Length inches(") 9.75" 1" 2" 3" 4" Other Customized Size Outside diameter 2.7 (6.9 cm) Inside diameter 1.1 (2.8 cm) Effective Filtration Area.67m² (7.2 ft²) per 1 inch Maximum Steam Temperature 16 C (32 F) Operating Temperature 8 C (176 F) Differential Pressure 5.5 bar at 25 C (8 psi at 77 F) 2.1 bar at 14 C (3 psi at 284 F) Maximum replaceable pressure drop 2.4 bar (35 psi)

10 Steam/Autoclave Autoclave or in situ Steam : 121 C (25 F) for 3 minutes at 1. bar (15 psi) 7% IPA 1% Hydrogen Peroxide Filter Series LOFMEM -Asia ALM-AT All PTFE Nominal Length (Inches( )/mm) 1-1 /254mm 2-2 /58mm 3-3 /762mm 4-4 /116mm Gasket Or O-ring S Silicone B- Buna-N E- EPDM V- Viton T- Teflon encapsulated Viton ALM-AT DOE E Retention Rating (μm).5 micron.1 micron.2 micron.45 micron.65 micron 1 micron 2 micron 3 micron 5 micron 1 micron End Configuration DOE - Double Open End (hard end caps) 1-226/Flat Single Open End 2-222/Fin Single Open End 3-226/Fin Single Open End 4-222/Flat Single Open End Eaton Filtration Shanghai. No.353 Riying Road North, W.G.Q F.T.Z,Pudong, Shanghai 2131 China Voice: Fax: Eaton Filtration Singapore 4 LOYANG LANE #4-1/2 SINGAPORE Voice: Fax: Eaton Filtration-Beijing A111, SK Tower Beijing, No.6, Jiawai Avenue, Chaoyang District, Beijing, China 122 Voice: ; Fax: Eaton Filtration Japan Uruma Kowa Bldg Akasaka Minato-ku, Tokyo Japan Voice: ; Fax: Eaton Filtration AUNZ 47 Holbeche Road, Arndell Park, NSW Australia Voice: ; Fax: Eaton Filtration Korea 7th Fl, Bethel B/D, 324-1, Yangjae-Dong, Seocho-Gu, Seoul , Korea Voice: ; Fax: Eaton Filtration India 122, Casablanca, CBD - Belapur, Sector-11, Maharastra, Navi, Mumbai , India Voice: ; Fax: Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. Litho USA Eaton Filtration Sdn. Bhd. - Malaysia office Unit 5.9 Wisma BICMA Lot 2, Jalan 51A/243, P.O. Box 418, 4675 Petaling Jaya, Selangor Malaysia Voice: ; Fax: Eaton Filtration Pte Ltd - Indonesia office Ariobimo Sentral 7th Floor, Jl. HR. Rasuna Said Blok X-2 Kav. 5, Jakarta 1295, Indonesia Voice: ; Fax: All information and recommendations appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the information herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.

Eaton s LOFCAP encapsulated filters can be used in a wide range of applications including laboratory fluids, dairy water,& air, scale up, opthalmics, small volume filtration, small volume process

LOFCAP disposable capsule is ideally suited for the filtration of developer, DI water and small volume batch processing.

Each filament of this filter is thermally welded hence it does not release fiber during usage and the pores rarely get enlarged.

11 Eaton s LOFCAP encapsulated filters can be used in a wide range of applications including laboratory fluids, dairy water,& air, scale up, opthalmics, small volume filtration, small volume process water and similar applications. Compact and light, it is ideal for use in a variety of restricted devices and easy to enable quick and efficient maintenance. LOFCAP disposable capsule is ideally suited for the filtration of developer, DI water and small volume batch processing. They are well suited for small to medium scale production lines and research facilities. Each filament of this filter is thermally welded hence it does not release fiber during usage and the pores rarely get enlarged. The disposable filter comes with low surfactant binding, superior wet ability and the highest standards of down stream cleanliness enabling optimum equipment efficiency, enhanced safety for filtration and fast filter change. Features and Benefits For small volume point of use filtration. For point-of-use filtration of a broad range of acids, bases, non-flammable solvents and photo resists. The capsule filter is available in a variety of configurations and grades. Air vent for storage tank. Self-contained capsule for easy change out and disposal. High-surface area design increases filtration throughput. Top and Bottom cap polypropylene Media PP, PTFE, PES, NYLON Weld polypropylene Inlet/Outlet Connecons 1/4" NPTM 1/2"NPTM 3/8" Hose Barb 1/4" Swagelok 1/4" Swagelok 3/8" Swagelok 1/2" Swagelok Vent, Drain Connection 1/8" NPTM 1/8"NPTM 1/8"NPTM 1/4"Swagelok 1/8"Swagelok 1/4"Swagelok 1/4"Swagelok Micron Ratings.1μm,.2μm,.45μm,.65μm, 1μm, 3μm, 5μm, 1μm, 4μm, 7μm Differential Pressure 5 bar at 38 C (75 psi at 12 F) Maximum Reverse Differential Pressure 3.5 bar at 23 C (5 psi at 73 F) Recommended max. flow rate 1 GPM(37.7 LPM)* *Based on capsule inlet/outlet size.in most cases the max flow will be lower based on the fiter being used.

12 Specifications Size Filtration Area Inlet/Outlet Connections Vent, Drain Connection ø7mm x 137mmH 13cm² 1/4" NPTM 1/8" NPTM ø78mm x 172mmH 26cm² 1/2"NPTM 1/8"NPTM ø68mm x 88mmH 65cm² 3/8" Hose Barb 1/8"NPTM ø72mm x 114mmH 13cm² 1/4" Swagelok 1/4"Swagelok ø72mm x 114mmH 13cm² 1/4" Swagelok 1/8"Swagelok ø72mm x 172mmH 26cm² 3/8" Swagelok 1/4"Swagelok ø72mm x 172mmH 26cm² 1/2" Swagelok 1/4"Swagelok Filter Specification Code ALCAP -2 -H P Filter Series LOFCAP Asia Retention Rating (μm).1 micron.2 micron.45 micron 1 micron 2 micron 3 micron 5 micron 1 micron 4 micron 7 micron End Connections Inlet/Outlet, Vent/Drain A ¼ NPTM; 1/8 NPTM B ½ NPTM; ¼ NPTM AS - 1/4 Swagelok; ¼ Swagelok AS8-1/4 Swagelok; 1/8 Swagelok A3S - 3/8 Swagelok; 1/4 Swagelok BS ½ Swagelok; ¼ Swagelok B3S - 3/8 Swagelok; ¼ Swagelok H 3/8 Hose Barb; 1/8 NPTM Media Material P Media PP S Media PES T PTFE N Nylon Eaton Filtration Shanghai. No.353 Riying Road North, W.G.Q F.T.Z,Pudong, Shanghai 2131 China Voice: Fax: Eaton Filtration Japan Uruma Kowa Bldg Akasaka Minato-ku, Tokyo Japan Voice: ; Fax: Eaton Filtration Singapore 4 LOYANG LANE #4-1/2 SINGAPORE Voice: Fax: Eaton Filtration AUNZ 47 Holbeche Road, Arndell Park, NSW Australia Voice: ; Fax: Eaton Filtration-Beijing A111, SK Tower Beijing, No.6, Jiawai Avenue, Chaoyang District, Beijing, China 122 Voice: ; Fax: Eaton Filtration India 122, Casablanca, CBD - Belapur, Sector-11, Maharastra, Navi, Mumbai , India Voice: ; Fax: For more information, please us at filtration@eaton.com, or call Visit us online at filtration.eaton.com for a complete list of Eaton s filtration products. Eaton Filtration Sdn. Bhd. - Malaysia office Unit 5.9 Wisma BICMA Lot 2, Jalan 51A/243, P.O. Box 418, 4675 Petaling Jaya, Selangor Malaysia Voice: ; Fax: Eaton Filtration Pte Ltd - Indonesia office Ariobimo Sentral 7th Floor, Jl. HR. Rasuna Said Blok X-2 Kav. 5, Jakarta 1295, Indonesia Voice: ; Fax: Eaton Filtration Korea 7th Fl, Bethel B/D, 324-1, Yangjae-Dong, Seocho-Gu, Seoul , Korea Voice: ; Fax: Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. Litho USA All information and recommendations appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the information herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.

Eaton s LOFTREX filters are the ideal medium for critical chemicals, paint/ink, water, plating, pharmaceuticals, food & beverages, microelectronics and cosmetics processing applications LOFTREX high

13 Eaton s LOFTREX filters are the ideal medium for critical chemicals, paint/ink, water, plating, pharmaceuticals, food & beverages, microelectronics and cosmetics processing applications LOFTREX high performance polypropylene melt blown filter is manufactured in a computer controlled machine and is made of melting polypropylene which is ideal for aggressive chemicals and general filtration requirements. The inner layer fibers have a smaller diameter and have high density as compared to the medium and external layer fibers, creating variable increased porosity, and it results in reduced pressure drop and high contaminant dirt holding capacity. It also renders high surface area and non-fiber releasing filtration. Eaton s LOFTREX has an optional industrial PP melt blown filter which is made of four layers of PP fibers. The inner fibers of the depth PP filter cartridge are extremely fine and compact to capture different sizes of particle into different layers of the fiber. This variable porosity can reduce the pressure drop and creates high contaminant dirt holding capacity for industrial application. Features and Benefits Excellent chemical compatibility and 1% natural polypropylene provided broad chemical compatibility for a variety of applications. Fixed pore structure provides efficiency integrity and optimum particle retention and prevents media migration and ensures consistent quality filtration performance. No binders, additives and lubricants. High flow rate, low pressure drop, high dirt-holding capacity and longer service life. Two or four layers structure. Low pressure drop. High dirt-holding capacity and high removal ratings. Longer service life Filter Specifications Material End caps/center core Gasket/O-Ring Options Buna-N (NBR), EPDM, Silicone, Viton, Teflon encapsulated Viton Micron Ratings.5μm 1μm 3μm 5μm 1μm 2μm 25μm 3μm 5μm 75μm 1μm Dimensions Nominal Length inches (")/mm Outside Diameter 61mm (2.4 inch), 63mm (2.5 inch), 115mm (4.5 inch) Inside Diameter 2mm (.8 inch), 23mm (.9 inch), 26mm (1 inch), 28mm (1.1 inch), 3mm (1.2 inch), 33mm (1.3 inch), 36mm (1.4 inch) Operating Conditions Maximum differential pressure 3 bar at 27 C (5 psi at 8 F) 2 bar at 6 C (3 psi at 14 F) 1 bar at 8 C (14 psi at 176 F) Maximum Replaceable Pressure Drop 1 bar (14 psi) 2 bar (3 psi) For industry cartridge

Filter Specification Code PP Melt Blown industry Filter Cartridge Bar.6 Psi.9.5.7.4.5.3.3.2.1.15 3 4 5 GPM 1 12 14 16 18 2 Flow Rate LPM Filter Series LOFTREX - Asia Retention Rating.5 micron 1.

14 Filter Specification Code PP Melt Blown industry Filter Cartridge Bar.6 Psi GPM Flow Rate LPM Filter Series LOFTREX - Asia Retention Rating.5 micron 1. micron 3. micron 5.micron 1 micron 2 micron 5 micron 75 micron 1 micron Feature Options I3-3 layers I4-4 Layers U- Grooved W- Pattern C- PP Core CE- PP core & Cover B- Big Blue ALX S -B The Stratum-C filter is available with a variety of gasket, O-ring and end cap configurations. NominalLength (Inches( )/mm) 5-5 /127mm /248mm 1-1 /254mm 2-2 /58mm 3-3 /762mm 4-4 /116mm End Configuration DOE - Double Open End (hard endcaps) / Flat Single Open End / Fin Single Open End / Fin Single Open End / Flat Single Open End Gasket Or O-ring S Silicone B Buna-N E EPDM V Viton T Teflon encapsulated Viton Eaton Filtration Shanghai. No.353 Riying Road North, W.G.Q F.T.Z,Pudong, Shanghai 2131 China Voice: Fax: Eaton Filtration Singapore 4 LOYANG LANE #4-1/2 SINGAPORE Voice: Fax: Eaton Filtration-Beijing A111, SK Tower Beijing, No.6, Jiawai Avenue, Chaoyang District, Beijing, China 122 Voice: ; Fax: Eaton Filtration Japan Uruma Kowa Bldg Akasaka Minato-ku, Tokyo Japan Voice: ; Fax: Eaton Filtration AUNZ 47 Holbeche Road, Arndell Park, NSW Australia Voice: ; Fax: Eaton Filtration Korea 7th Fl, Bethel B/D, 324-1, Yangjae-Dong, Seocho-Gu, Seoul , Korea Voice: ; Fax: Eaton Filtration India 122, Casablanca, CBD - Belapur, Sector-11, Maharastra, Navi, Mumbai , India Voice: ; Fax: For more information, please us at filtration@eaton.com, or call Eaton Filtration Pte Ltd - Indonesia office Ariobimo Sentral 7th Floor, Jl. HR. Rasuna Said Blok X-2 Kav. 5, Jakarta 1295, Indonesia Voice: ; Fax: Visit us online at filtration.eaton.com for a complete list of Eaton s filtration products. Eaton Filtration Sdn. Bhd. - Malaysia office Unit 5.9 Wisma BICMA Lot 2, Jalan 51A/243, P.O. Box 418, 4675 Petaling Jaya, Selangor Malaysia Voice: ; Fax: Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. Litho USA All information and recommendations appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the information herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations. EF-HFSS 6-29

LOFWIND filters from Eaton are ideal for hard line compounds as well regular applications such as fine chemicals, R.O. prefiltration, organic solvents, oilfield fluids, food & beverages, potable water, ink, DI water LOFWIND cartridge is a new premium-performance filtration product.

The advance technology results in multi-stages, graded- density design and the protection of serially arranged filter trains is optimized by the successive finer layers in the matrix of the product.

15 LOFWIND filters from Eaton are ideal for hard line compounds as well regular applications such as fine chemicals, R.O. prefiltration, organic solvents, oilfield fluids, food & beverages, potable water, ink, DI water LOFWIND cartridge is a new premium-performance filtration product. The computer-aided design and production process creates exact diamond-shaped depth filtration cones. The advance technology results in multi-stages, graded- density design and the protection of serially arranged filter trains is optimized by the successive finer layers in the matrix of the product. These filters are designed for the removal of particles from liquid. Features and Benefits Excellent resistance to a wide range of acid and alkali. Precision wound, no taste, no odor, low foaming, provides high dirt holding capacity. High particle retention as well as broad thermal compatibility. Unusually extended void volume for greater load capacity, longer service life and higher flow rate. 8% efficiency nominally rated. No Foaming. Low TOC content. Extractable-free and silicone-free. Filter Specifications Material, Bleached Cotton, Glass Fiber Core, Tin Steel, SUS 34, SUS 316 Length 127mm(5 inch) ~ 116mm(4 inch) Micron Ratings 1μm, 5μm, 1μm, 25μm, 3μm, 5μm, 75μm, 1μm, 15μm, 2 μm Dimensions / Parameters Nominal Length inches (")/mm Outside Diameter 61mm(2.4 inch), 63mm(2.5 inch), 115mm(4.5 inch) Inside Diameter 28mm (1.1 inch), 3mm (1.2 inch) Maximum Steam Temperature 7 C (158 F) Maximum Operating Pressure & Temperature 2.7 bar at 27 C (5 psi at 8 F) 1.37 bar at 6 C (2 psi at 14 F).7 bar at 82 C (1 psi at 18 F) Recommended Flow Rate 3 ~ 5 GPM per 1 inch Maximum replaceable pressure drop 1 bar (14 psi)

16 Filter Series LOFWIND - Asia Media Material P B Bleached Cotton G Fiber Glass Retention Rating (μm) 1 micron 3 micron 5 micron 1 micron 2 micron 5 micron 75 micron 1 micron 15 micron Optional Feature B Big Blue ALW -2 -P P -3 -B Core Material S Stainless Steel 34 S6 Stainless Steel 316 P Nominal Length (Inches( )/mm) 1-1 /254mm 2-2 /58mm 3-3 /762mm 4-4 /116mm Bar Psi Micro Fiber String Wound Filter Cartridge GPM LPM Flow Rate Eaton Filtration Shanghai. No.353 Riying Road North, W.G.Q F.T.Z,Pudong, Shanghai 2131 China Voice: Fax: Eaton Filtration Singapore 4 LOYANG LANE #4-1/2 SINGAPORE Voice: Fax: Eaton Filtration-Beijing A111, SK Tower Beijing, No.6, Jiawai Avenue, Chaoyang District, Beijing, China 122 Voice: ; Fax: Eaton Filtration Japan Uruma Kowa Bldg Akasaka Minato-ku, Tokyo Japan Voice: ; Fax: Eaton Filtration AUNZ 47 Holbeche Road, Arndell Park, NSW Australia Voice: ; Fax: Eaton Filtration Korea 7th Fl, Bethel B/D, 324-1, Yangjae-Dong, Seocho-Gu, Seoul , Korea Voice: ; Fax: Eaton Filtration India 122, Casablanca, CBD - Belapur, Sector-11, Maharastra, Navi, Mumbai , India Voice: ; Fax: Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. Litho USA Eaton Filtration Sdn. Bhd. - Malaysia office Unit 5.9 Wisma BICMA Lot 2, Jalan 51A/243, P.O. Box 418, 4675 Petaling Jaya, Selangor Malaysia Voice: ; Fax: Eaton Filtration Pte Ltd - Indonesia office Ariobimo Sentral 7th Floor, Jl. HR. Rasuna Said Blok X-2 Kav. 5, Jakarta 1295, Indonesia Voice: ; Fax: All information and recommendations appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the information herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.

Eaton s LOFSORB Cartridge Filter is ideal for use in drinking water, cyst reduction, chlorine removal, bottled water, color removal, soft drink production and flavor removal.

This dual filter removes fine sediment particles and reduces fine oil, smoke, odors, and oil vapor. It offers an economical solution for all filtration needs.

LOFSORB Block Carbon is made of high absorption capacity, granular activated carbon, compressing continuously to be an extrusion.

Product Benefits Excellent adsorptive capability and efficiency. High oil, smoke, oil vapor and odor reduction capacity. Extended strength and high dirt-holding capacity.

Reduce impurities in potable water and dissolved organics and chemicals such as chlorine.

17 Eaton s LOFSORB Cartridge Filter is ideal for use in drinking water, cyst reduction, chlorine removal, bottled water, color removal, soft drink production and flavor removal. LOFSORB series filter from Eaton is constructed of a carbon impregnated cellulose media, so it is well suited for both sediment filtration and taste/odor reduction. This dual filter removes fine sediment particles and reduces fine oil, smoke, odors, and oil vapor. It offers an economical solution for all filtration needs. LOFSORB String Wound series first filters the liquid through an out winding and then through a layer of granular activated carbon and finally through a polishing inner winding. LOFSORB Block Carbon is made of high absorption capacity, granular activated carbon, compressing continuously to be an extrusion. It includes superior absorption capacity and filtration efficiency. The PE outer wrap helps reduce coarse sediment particles, extending the service life of cartridge. Product Benefits Excellent adsorptive capability and efficiency. High oil, smoke, oil vapor and odor reduction capacity. Extended strength and high dirt-holding capacity. Priced to be a best value for performance. Offers true depth-type filtration for fine chemical. No release of carbon fines. Reduce impurities in potable water and dissolved organics and chemicals such as chlorine. Filter Specifications End Configuration Double Open End Gaskets Buna-N Outer Wrap Melt Blown Netting Operating Parameters Maximum Operating Temperature 5 C ( 122 F ) Differential Pressure up to 1 psid (6.9 bar) Operating Pressure up to 25 psig (17.2 bar) Maximum Replaceable ALA-I - 1 psi (7 bar) ALA-W - 2 psi (14 bar) Collapse Pressure 6 psi (41 bar) Steam/Autoclave Do not steam or autoclave EAC-BF Cartridge filters Flush Filters should be flushed for a minimum of five (5) minutes prior to use. Performance Tested and Verified by Independent Laboratory Testing.

18 Nominal Length (Inches( )/mm) 1-1 /254mm 2-2 /58mm 3-3 /762mm 4-4 /116mm Retention Rating (μm) 5 micron ALA -2 -E -5 -H Filter Series LOFSORB - Asia Carbon Type E Extrude Carbon Block I Carbon Impregnated Cellulose W Carbon Granular Wound Feature Option Default Standard H High Absorption B Big Blue LOFSORB Operation Data Type Length Gasket/O-ring Micron Rating Inside Diameter Outside Diameter ALA-I Maximum Operation Temperature: 52ºC (125ºF) Maximum Operation Pressure: 17bar (25 psi)maximum Differential Pressure: 7bar (1psi) Carbon Impregnated Cellulose 1" 2" 3" Buna-N 5μm 28mm(1.1 inch) 65mm(2.6 inch) ALA-W Maximum Operation Temperature: 5ºC (122 ºF) Maximum Operation Pressure: 17bar (25 psi) Maximum Differential Pressure: 14bar (2psi) Carbon Granular Wound 1" 2" 31" 5μm 28mm(1.1 inch) 65mm(2.6 inch) ALA-E Maximum Operation Temperature: 52ºC (122 ºF) Maximum Operation Pressure: 17bar (25 psi) Maximum Differential Pressure: 7bar (1psi) Collapse Pressure: 41bar (6psi) Coconut Shell, Coal Based Activated Carbon 1" 2" 3" 4" Buna-N 5μm 28mm(1.1 inch) 28mm(1.1 inch) 65mm(2.6 inch) Eaton Filtration Shanghai. No.353 Riying Road North, W.G.Q F.T.Z,Pudong, Shanghai 2131 China Voice: Fax: Eaton Filtration Singapore 4 LOYANG LANE #4-1/2 SINGAPORE Voice: Fax: Eaton Filtration-Beijing A111, SK Tower Beijing, No.6, Jiawai Avenue, Chaoyang District, Beijing, China 122 Voice: ; Fax: For more information, please us at filtration@eaton.com, or call Eaton Filtration Japan Uruma Kowa Bldg Akasaka Minato-ku, Tokyo Japan Voice: ; Fax: Eaton Filtration AUNZ 47 Holbeche Road, Arndell Park, NSW Australia Voice: ; Fax: Eaton Filtration India 122, Casablanca, CBD - Belapur, Sector-11, Maharastra, Navi, Mumbai , India Voice: ; Fax: Visit us online at filtration.eaton.com for a complete list of Eaton s filtration products. Eaton Filtration Sdn. Bhd. - Malaysia office Unit 5.9 Wisma BICMA Lot 2, Jalan 51A/243, P.O. Box 418, 4675 Petaling Jaya, Selangor Malaysia Voice: ; Fax: Eaton Filtration Pte Ltd - Indonesia office Ariobimo Sentral 7th Floor, Jl. HR. Rasuna Said Blok X-2 Kav. 5, Jakarta 1295, Indonesia Voice: ; Fax: Eaton Filtration Korea 7th Fl, Bethel B/D, 324-1, Yangjae-Dong, Seocho-Gu, Seoul , Korea Voice: ; Fax: Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. LOFSORB is a trademark of Eaton. Matrikx is a registered trademark of KX Technologies, LLC. All information and recommendations appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the information herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations. LOFSORB-SS 6-29

Eaton s LOF- PLEAT filter cartridge is a popular choice in a variety of applications, including: petrochemicals, solvents, boiler water, lube oil, chemicals, inks and oil & gas.

This enables highly effective and superior retention capabilities and maximizes service life.

Features and Benefits Economical cartridges - Cleanable and reusable in most applications.

19 Eaton s LOF- PLEAT filter cartridge is a popular choice in a variety of applications, including: petrochemicals, solvents, boiler water, lube oil, chemicals, inks and oil & gas. Eaton s Pleated High Flow filter cartridges are designed with either single or multi-layer pleated construction that provides great surface area, stability to the flow rate, low pressure drop. This enables highly effective and superior retention capabilities and maximizes service life. The elements are treated particularly to ensure complete chemical compatibility with no organic contaminants extractable to assure maximizes utilization of filtration media. Features and Benefits Economical cartridges - Cleanable and reusable in most applications. Long life time use High surface area design provides superior flow rates and high dirt holding capacity with extended service life. Low pressure drop Due to our pleated design and increased surface area. Available in a variety of cartridge lengths and end cap to fit most industrial vessels. No organic contaminants extractable. High flow rate is available. Filter Specifications End Caps PVC Material Polyester, Nylon, Polyethersulfone, PTFE Core Gasket/O-Ring Options Silicon, Viton, Buna-N, EPDM Teflon Encapsulated Viton Media support Nominal Length inches (")/mm Outside Diameter 2.7 (6.9 cm) Inside Diameter 1.1 (2.8 cm) Micron Ratings.5μm, 1μm, 5μm, 1μm, 2μm, 3μm, 5μm, 1μm Operating Parameters Operating Temperature 75 C (167 F) Differential Pressure 4.8 bar at 2 C (7 psi at 68 F) 3.4 bar at 5 C (5 psi at 122 F) Maximum replaceable pressure drop 2.4 bar (35 psi )

20 Filter Specification Code Nominal Length (Inches( )/mm) /248mm 1-1 /254mm 2-2 /58mm 3-3 /762mm 4-4 /116mm Filter Series LOFPLEAT - Asia ALP - N Nominal Rate ALP - A Absolute Rate ALP - N DOE E -P Retention Rating (μm).5 micron 1 micron 5 micron 1 micron 2 micron 3 micron 5 micron 1 micron End Configuration DOE - Double Open End (hard end caps) 1-226/Flat Single Open End 2-222/Fin Single Open End 3-226/Fin Single Open End 4-222/Flat Single Open End Gasket Or O-ring S Silicone B- Buna-N E- EPDM V- Viton T- Teflon encapsulated Viton Upstream particle counts Beta Ratio = Downstream particle counts What is a Beta Ratio? According to the definition set by the American Filtration & Separations Society, it s a measure of separation efficiency that s equal to the ratio of the total number of particles of a given size in the feed to the total number of particles of that size appearing in the permeate/filtrate. The term is most often used in reference to evaluating cartridge filters. The micron ratings above illustrate various efficiency and beta ratio value levels. These were determined through laboratory testing, and can be used as a guide for selecting cartridges and estimating their performance. Under actual field conditions, results may vary somewhat from the values listed due to the variability of filtration parameters. Testing was conducted using the singlepass test method, water at 2.5 gpm/1 cartridge. Contaminants included latex beads, coarse and fine test dust. Removal efficiencies were determined using dual laser source particle counters. Feature Options P7G PP for 7G series T7G PTFE for 7G series B Big Blue Cage Super Flow S7G PES for 7G series N7G Nylon for 7G series N Without Net Filter media Nylon Polyethersulfone PTFE Micron Rating(μm).2,.5,1,2,5,1,2,3,4.1,.2,.5,1.1,.2,.5,1.2,.5,1,3,1 Maximum Recommended Operating Temperature 8 C 9 C 9 C 9 C Maximum Recommended Differential Pressure 4.8kg/cm² at 2 C (7psi at 68 F ) 3.4kg/cm² at 5 C (5psi at 122 F ) 1.4kg/cm² at 9 C (2psi at 194 F ) 4.8kg/cm² at 5 C (7psi at 122 F ) 3.4kg/cm² at 8 C (5psi at 176 F ) 1.4kg/cm² at 11 C (2psi at 23 F ) 4.8kg/cm² at 2 C (7psi at 68 F ) 3.4kg/cm² at 5 C (5psi at 122 F ) 1.4kg/cm² at 9 C (2psi at 194 F ) 4.8kg/cm² at 25 C (7psi at 77 F ) 3.4kg/cm² at 8 C (5psi at 176 F ) 1.4kg/cm² at 11 C (2psi at 23 F ) Bar Psi High Flow Rate Wet Process Filtrer Polyethersulfone Bar Psi High Flow Rate Wet Process Filtrer PTFE Bar Psi High Flow Rate Wet Process Filtrer NYLON Bar Psi High Flow Rate Wet Process Filtrer GPM GPM GPM GPM LPM LPM LPM LPM Flow Rate Flow Rate Flow Rate Flow Rate Eaton Filtration Shanghai. No.353 Riying Road North, W.G.Q F.T.Z,Pudong, Shanghai 2131 China Voice: Fax: Eaton Filtration Japan Uruma Kowa Bldg Akasaka Minato-ku, Tokyo Japan Voice: ; Fax: Eaton Filtration Sdn. Bhd. - Malaysia office Unit 5.9 Wisma BICMA Lot 2, Jalan 51A/243, P.O. Box 418, 4675 Petaling Jaya, Selangor Malaysia Voice: ; Fax: Eaton Filtration Singapore 4 LOYANG LANE #4-1/2 SINGAPORE Voice: Fax: Eaton Filtration AUNZ 47 Holbeche Road, Arndell Park, NSW Australia Voice: ; Fax: Eaton Filtration Pte Ltd - Indonesia office Ariobimo Sentral 7th Floor, Jl. HR. Rasuna Said Blok X-2 Kav. 5, Jakarta 1295, Indonesia Voice: ; Fax: Eaton Filtration-Beijing A111, SK Tower Beijing, No.6, Jiawai Avenue, Chaoyang District, Beijing, China 122 Voice: ; Fax: Eaton Filtration India 122, Casablanca, CBD - Belapur, Sector-11, Maharastra, Navi, Mumbai , India Voice: ; Fax: Eaton Filtration Korea 7th Fl, Bethel B/D, 324-1, Yangjae-Dong, Seocho-Gu, Seoul , Korea Voice: ; Fax: For more information, please us at filtration@eaton.com, or call Visit us online at filtration.eaton.com for a complete list of Eaton s products. 29 Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. Litho USA All information and recommendations appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the information herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations. EF-LPHT 6-29

LOFMET filters are designed for a variety of extreme applications such as corrosive liquids & gases, cryogenic fluids, high viscosity solutions, process steam, high temperature liquids &

Each layer of filter media is metallurgically bonded, that ensures stable pore size and structure at high pressure without media migration or wire loss.

applications, including chemical processing, gases filtration and gel removal.

Initially, this series began as flat porous sheets, which were gradually shaped and welded into cylindri- cal elements.

Features and Benefits SS34, SS36 and SS316L are available for pleated cartridge Constructed entirely of sintered stainless steel powder for high corrosion resistance Cleanable and Back

Specifications Material Stainless steel 34, 316, 316L End Cap DOE, Inside O-ring, Outside O-ring, NPT thread etc.

21 LOFMET filters are designed for a variety of extreme applications such as corrosive liquids & gases, cryogenic fluids, high viscosity solutions, process steam, high temperature liquids & gases and catalyst recovery LOFMET Stainless Steel Filters are designed by using electron beam welding permanently joining the filter media, the end and the core. Each layer of filter media is metallurgically bonded, that ensures stable pore size and structure at high pressure without media migration or wire loss. The cartridges feature high strength, multiple layers of diffusion-bonded wire mesh whch are easily changeable and that provides excellent performance in a wide range of hard line applications, including chemical processing, gases filtration and gel removal. LOFMET Sintered Metal Filter cartridges are made from fine stainless steel powders that results into fixed pore filters with high temperature, pressure and solvent resistance. Initially, this series began as flat porous sheets, which were gradually shaped and welded into cylindri- cal elements. These filters are recommended for steam service and are well suited for liquid or gas application. Features and Benefits SS34, SS36 and SS316L are available for pleated cartridge Constructed entirely of sintered stainless steel powder for high corrosion resistance Cleanable and Back washable for re-usability maximum economy High temperature sintering to eliminate media migration Various gasket/o-ring materials and configurations for use in most filtration systems Filter Specifications Material Stainless steel 34, 316, 316L End Cap DOE, Inside O-ring, Outside O-ring, NPT thread etc. Gasket/O-Ring Options Teflon, Viton, Silicon, EPDM Micron Ratings Pleated 1~1μm Sintered -.5~2μm Dimensions/Parameters Nominal Length inches (")/mm End Cap Options Flat Gasket Double Open End O-Ring with Flat End O-Ring with Fin O-Ring with Fin Outside diameter 2.7 (6.9 cm) or 2.36 (6. cm) Inside Diameter 1.1 (2.8 cm) Differential Temerature 45 C (842 F) (Designed by Demands) Differential Pressure 15 bar (2175 psi) (Designed by Demands) * Max temperature applicable to NPT style filters only (No O-Rings or gaskets). Consult Eaton for guidance on specific chemical/temperature compatibility.