NEW RAPID TAP PASTE. Section 1: PRODUCT INFORMATION. Chemtrec (24h). Section 2: HAZARDOUS INGREDIENTS

Size: px
Start display at page:

Download "NEW RAPID TAP PASTE. Section 1: PRODUCT INFORMATION. Chemtrec (24h). Section 2: HAZARDOUS INGREDIENTS"

Transcription

1 NEW RAPID TAP PASTE Revision Date: 2012/04/03 Chemical family: Mixture. Product uses: Chemical. Manufacturer emergency phone number: Section 1: PRODUCT INFORMATION Product name: New Rapid Tap Paste Manufacturer: Relton Corporation 317 Rolyn Place Arcadia, CA Information phone number: Chemtrec (24h). Supplier: Bessey Tools North America 1555 Bishop Street, Unit #6 Cambridge, Ontario N1R 7J4 Tel: , Fax: TDG classification: Not regulated. WHMIS classification: Not controlled. DSL status: The substance(s) listed in section 2 appear on the Domestic Substances List. Supplier MSDS date: 2011/01/10. Section 2: HAZARDOUS INGREDIENTS C.A.S. CONCENTRATION % Ingredient Name T.L.V. LD/50 LC/ < 40 ALKANES, CHLORO NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE < 40 HYDROCARBON WAXES,PETROLEUM,CLAY TREATED NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE < 10 PETROLEUM OIL PARAFINIE NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE > 5 EPOXIDIZED SOYBEAN OIL NOT AVAILABLE 40,000 MG/KG RAT ORAL NOT AVAILABLE * CINNAMON OIL PERFUME NO CAS #DISCLOSED NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE > 3 METAL CUTTING FLUID ADDITIVE 10 MG/M3 NOT AVAILABLE NOT AVAILABLE < 1 OLEFIN SULFIDE NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE Section 2A: ADDITIONAL INGREDIENT INFORMATION Physical state: Solid *: Contains trace amounts only. Appearance & odor: Slight odour. Light amber. Paste Odor threshold (ppm): Vapour pressure (mmhg): Not applicable. Section 3: PHYSICAL DATA RAPID TAP NEW RAPID TAP PASTE 1/5

2 Vapour density (air=1): Not applicable. Volatiles (%) By volume: Evaporation rate (butyl acetate = 1): Boiling point ( C): >176.6 Freezing point ( C): ph: Not applicable. Specific 20 C: (water = 1) (@ 25 C). Solubility in water (%): < 0.2. Coefficient of water\oil dist.: Flammability: Not flammable. Section 4: FIRE & EXPLOSION DATA Conditions of flammability: At temperatures at or above flash point. Extinguishing media: Carbon dioxide, dry chemical, foam. Water fog. Special procedures: Positive pressure self contained breathing apparatus required and full protection to prevent skin contact. Treat as an oil fire. Use water spray to cool fire exposed containers. Auto ignition temperature ( C): Flash point ( C), method: Cleveland Open Cup. 204 C (400 F). Lower flammability limit (% vol): Upper flammability limit (% vol): Explosion Data Sensitivity to static discharge: Sensitivity to mechanical impact: Hazardous combustion products: Hydrogen chloride (HCl). Hydrogen sulfide (H2S). Explosive power: Section 5: REACTIVITY DATA Chemical stability: Stable under normal conditions. Conditions of instability: Elevated temperatures. RAPID TAP NEW RAPID TAP PASTE 2/5

3 Hazardous polymerization: Will not occur. Incompatible substances: Strong alkalies. Zinc (Zn). Iron (Fe). Strong reducing agents. Strong oxidizing agents. Hazardous decomposition products: Oxides of nitrogen (NOx). Aldehydes. Carbon monoxide. Hydrogen chloride. Carbon dioxide. Oxides of sulfur. Traces of hydrogen sulfide. Incompletely burned hydrocarbon products. Section 6: TOXICOLOGICAL PROPERTIES Route of entry: Skin contact, eye contact, inhalation and ingestion. Effects of acute exposure Eye contact: May cause mild irritation. Skin contact: May cause mild irritation. Inhalation: May cause mild respiratory irritation. Ingestion: May cause nausea. Effects of chronic exposure: None known. LD50 of product, species & route: Not available for mixture, see the ingredients section. LC50 of product, species & route: Exposure limit of material: Oil Mist. 5 mg/cu meter (long term). 10 mg/cu meter (short term). Sensitization to product: Carcinogenic effects: Not listed as a carcinogen. Reproductive effects: Teratogenicity: Mutagenicity: Synergistic materials: Precautionary Measures Gloves/Type: Cotton gloves. Section 7: PREVENTATIVE MEASURES Nitrile rubber gloves. RAPID TAP NEW RAPID TAP PASTE 3/5

4 Respiratory/Type: Eye/Type: If mist is present, wear a NIOSH approved respirator. Face shield. Safety goggles. Footwear/Type: Safety shoes per local regulations. Clothing/Type: Chemical resistant clothing or apron. When splashing is possible. Other/Type: Eye wash facility should be in close proximity. Emergency shower should be in close proximity. Ventilation requirements: Local and mechanical ventilation required. Leak/Spill: Soak up with an absorbent material. Wear appropriate protective equipment. Place in a closed container for disposal. For large spills, dike area to prevent spreading. Waste disposal: In accordance with municipal, provincial and federal regulations. Handling procedures and equipment: Avoid breathing vapors/mists. Use adequate ventilation. Wear personal protective equipment appropriate to task. Wash thoroughly after handling. Avoid contact with skin, eyes and clothing. Do not cut, grind, weld or drill on or near containers. Do not weld on or near empty drums. Launder contaminated clothing prior to reuse. Storage requirements: Store away from incompatible materials. Keep containers closed when not in use. Keep away from food and food products. Do not store in zinc or iron container. Do not store at elevated temperatures. TDG classification: Not regulated. Special shipping information: See transportation information. Section 8: FIRST AID MEASURES Skin contact: Remove contaminated clothing. Wash thoroughly with soap and water. Seek medical attention if irritation persists. RAPID TAP NEW RAPID TAP PASTE 4/5

5 Eye contact: Flush with water for at least 15 minutes. Seek medical attention if irritation persists. Inhalation: Remove victim to fresh air. If irritation occurs, consult a physician. Ingestion: Do not induce vomiting, seek medical attention. Never give anything by mouth to an unconscious person. Drink several glasses of water to dilute. Additional information: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any inaccuracies. Section 9: ADDITIONAL INFORMATION General note: This material safety data sheet was prepared from information obtained from various sources, including product suppliers and the Canadian Center for Occupational Health and Safety. This MSDS was generated by Conform Plus Application Service. Visit us at RAPID TAP NEW RAPID TAP PASTE 5/5