AQUACHLOR. Doses are recommended based on the water quality.

Transcription

1 AQUACHLOR AQUACHLOR is a first generation bactericides. It is a liquid compound with 5% to 7% available chlorine stabilised and standardised. AQUACHLOR when dosed as per recommendation, help in maintaining the water quality. Microorganism such as bacteria, fungus, yeast, algae etc. are responsible for the spoilage of water. They produce visible sign of bio-deterioration which leads malodour, viscosity loss, colour change, physiological changes etc. Bacteria grow and spoiled the water and biochemical changes takes place in the form of bio-deterioration. The damage by the process of bio-deterioration by the bacteria will be visible only during the post deterioration period. Chlorine is unparalleled in its power to kill bacteria & algae. Its main characteristics are that it is most unstable and shelf life is quite short. Also, when added to the water, atmospheric hydrogen, due to its chemical affinity, attracts chlorine out of the solution. Hence, chlorine gets a very little time to perform. Other products of chlorine are deficient in shelf life & use stability i.e. available of percent. Chlorine keep on reducing even during storage. AQUACHLOR is stable in both, activity & storage. Chlorine in AQUACHLOR does not merge with hydrogen in atmosphere, but gets spend in during work. Also it did not loose its available chlorine during storage. This exceptional stability is our secret. Doses are recommended based on the water quality.

2 COMPARATIVE BACTERICIDAL ACTIVITY ON COMMON PATHOGENIC MICRO - ORGANISMS. Reference :- Data for Phenol, Dettol, Savlon, & Pemon taken from INDIAN JOURNAL OF MEDICAL SCIENCES, Vol. 19, No. 6, pp Date for AQUACHLOR from Haffkine Institute, Bombay Test Report dated 10/06/1980. The Highest Effective Dilutions for 10 min. contact are given against each organism & below each product. TEST ORGANISM PHENOL LYSOL DETTOL SAVLO PEMON AQUACHLOR N 1. Staphylococus aureus 1: 10 1: 90 1: 80 1: 400 1: 200 1: Salmonella typhi (786) 1: 90 1: 100 1: 90 1: 400 1: 100 1: Pseudomonas 1: 10 1: 10 No No 1: 5 1: 2500 aeruginosa Effect Effect 4. Bacillus sabtilis 1: 10 1: 200 1: 10 1: 400 1: 800 1: Escherichia coli 1: 10 1: 40 1: 60 1: 80 1: 90 1: Clostridium tetani 1: 10 1: 100 1: 100 1:100 1: 100 1: Clostridium welchii 1: 100 1: 100 1: 200 1:800 1: 400 1: Klebsiella aerugenes -- NOT AVAILABLE -- 1: Mycobacterium -- NOT AVAILABLE -- 1: 1000 tuberculosis 10. Candida albicans -- NOT AVAILABLE -- 1: 5000 AQUACHLOR effectively destroys : (A) VIRUSES - (Lypophilic & Hydrophilic e.g. Hepatitis A & B, Bepalitis, Influenza, Poliomylitis, Herpes, etc.) (B) NON ACID - FAST VEGETATIVE BACTERIA (C) ACID FAST BACILLI (D) BACTERIAL SPORES (E) FUNGI (F) ALGAE (G) PROTOZOA

3 AQUACHLOR INFORMATION CHART Aquachlor is Alkaline and Chlorinated compound used as antimicrobial agents that assures germ free water, Poultry, Mutton, Fish, Eggs, Vegetables and Dessert Fruits. Cleaning by detergents or soaps proves to be inadequate and unsatisfactory in protecting health and hygiene. AQUACHLOR possess a rare and unique combination of special properties which guarantees full protection and DEEP CLEANING. Simultaneously acts as :- Vegetable & Dessert Fruits Cleanings. Water Purification A) FOOD ITEMS CLEANSING : DOSAGE 1. Mutton, Poultry, Fish 10 Ml. AQUACHLOR Per 5 Ltr. of Water (for 100ppm). 2. Vegetables / Salads - DO - 3. Dessert Fruits -DO- ( Soak the items in solutions for 10 minutes then wash with purified water) B) KITCHEN : Premises, Production area, Cooking platforms, Utensils, Crockery, Chinaware melamine, Enamel, Glassware, Storage Tank, Meat cutting boards, Knives, Cold storage etc. Doses : 30 ml. AQUACHLOR for 12 Ltr. of water. C) DRINKING WATER & PROCESS WATER : Water used in production area can be made germ free. To prevent the bacterial contamination from the water. (100 Ml. + 10,000 Ltr. Water) RECOMMENDED DILUTIONS CHART FOR AQUACHLORE (A) FOR DRINKING WATER 100 ML of ACL Ltr. of water 0.5 PPM 50 ML of ACL Ltr. of water 0.2 PPM 0.5 ML of ACL + 50 Ltr. of Water 0.5 PPM 1 ML of ACL Ltr. of water 0.5 PPM 2 ML of ACL Ltr. of water 0.5 PPM D) SANITIZATION OF WATER STORAGE TANK : Water storage tank contains Micro organisms due to constant proximity of water with inner surface of tank. Fungus growth and other disease causing Bacteria constantly breed in tanks. Brush the inner surface of the tanks with solution. After 10 minutes, wash the tank twice with water.(300ml. + 5 Ltr. Water) contact time Minutes.

4 Action of AQUACHLOR (1) Sanitizers (2) Cleaners (3) Stain Removers (4) Germicide (5) Verucidal, (6) Bactericidal (7) Sporocidal (8) Microbiocidal (9) Fungicide (10) Tuberculocidal, (11) Coccidiocidal (12) Protozoacide (13) Removes all three stain of Poliomvelitiz as well as on molds, algae and air-borne spores. HIGH LIGHT OF AQUACHLOR 1. AQUACHLOR can be used by mixing usual soap of detergent for stainless and clean wash. 2. Highly effective sanitizer, AQUACHLOR makes even heavily infected articles, garbage cans absolutely safe. 3. AQUACHLOR make tiles, bath tubes, tanks, sinks, sparkling and germ free. 4. AQUACHLOR is unique three in one combination, i.e. cleaning, sanitizing deodorizing and stain removers saves money and labour.

5 Technical& General Specifications of AQUACHLOR- 5% Stable Chlorine Physical State : Liquid. Appearance : Pale Yellow Green Liquid. Specific gravity : 1.07 to Odour : Chlorine. Available Chlorine Content by volume : 5.0% Stable Form. Chemical Group : Alkaline. Solubility in Water : Complete. ph : 9.00 to Free Alkali (as NaOH) : Iron (as Fe) : 0.40 ppm (maximum) VOC (Volatile Organic Content) : 0.00 %. Quality : App Kg. Make : MINITEK. Remarks : Effectively eligible to kill/remove Algae, Fungi, Bacteria Spores and Protozoa, etc.