WILPINJONG COAL PTY LTD. Environment Protection Licence (EPL) 12425

Size: px
Start display at page:

Download "WILPINJONG COAL PTY LTD. Environment Protection Licence (EPL) 12425"

Transcription

1 WILPINJONG COAL PTY LTD Environment Protection Licence (EPL) Link to Environment Protection Licence EPL12425 LICENCE MONITORING DATA MONTHLY SUMMARY REPORT for 1 February 2018 to 28 February 2018

2 Air Monitoring Air quality surrounding the Wilpinjong Coal Mine is monitored using: tapered element oscillating microbalances (TEOM); high volume air samplers (HV); and dust deposition gauges (DG). In terms of the above equipment: 1. the TEOM and HVAS measure fine dust particles up to 10 microns in diameter (i.e. PM10); and 2. the DG measure the total dust deposited in the gauge during the sample period. All are influenced by mining as well as non mining activities in the local area. The locations of the above monitoring equipment in relation to Wilpinjong Coal Mine are shown in Figures 5 and 7. A summary of the monitoring results for the month is provided in Table 1 and the yearly trends are also shown in Figures 1 to 3. Page 2 of 17

3 Table 1 EPL ID No. Monitoring Point ID. Pollutant 3 DG4 Particulates - TSM 4 DG5 Particulates - TSM 6 DG8 Particulates - TSM 9 DG11 Particulates - TSM 17 DG15 Particulates - TSM 13 HV1 PM10 19 HV4 PM10 20 HV5 PM10 22 TEOM3 PM10 23 TEOM4 PM10 Unit of Measure grams per square metre per month grams per square metre per month grams per square metre per month grams per square metre per month grams per square metre per month micrograms per cubic metre micrograms per cubic metre micrograms per cubic metre micrograms per cubic metre micrograms per cubic metre Monitoring Frequency required by EPL No. of times measured during month Min. Value Max. Value Mean Value Measurement Annual Average Limit Exceed n (yes/no) Date Last Sampled Date Reported Monthly /02/18 14/03/18 Monthly No 28/02/18 14/03/18 Monthly /02/18 14/03/18 Monthly /02/18 14/03/18 Monthly /02/18 14/03/18 Every 6 days /02/18 13/03/18 Every 6 days /02/18 13/03/18 Every 6 days /02/18 13/03/18 Continuous (24 Hr Average) Continuous (24 Hr Average) 100.0% % Page 3 of 17

4 Mar-17 Apr-17 May-17 Jun-17 Jul-17 Aug-17 Sep-17 Oct-17 Nov-17 Dec-17 Jan-18 Feb-18 Dust Deposition (g/m2/month) Mar-17 Apr-17 May-17 Jun-17 Jul-17 Aug-17 Sep-17 Oct-17 Nov-17 Dec-17 Jan-18 Feb-18 Dust Deposition (g/m2/month) Figure 1a. DG Results - 12 Month Trend DG4 DG5 DG8 DG11 DG Month Notes: 1. Limit of 4 g/m2/month (annual average) applies to DG5 (Wollar Village) - refer Figure 1b. 2. DG5 and DG8 results in May contained 70% and 80% organic matter respectively. 3. DG4 result for Jan contained 75% organic matter (i.e. from bird droppings). Figure 1b. DG 5 Results - Annual Average DG5 Project Approval Limit. Month. Page 4 of 17

5 PM10 (µg/m³) Particulate Matter <10 µm (µg/m 3 ) Figure 2. HV (PM10) Results - 12 Month Trend HV1 (Wollar) HV4 (Robinsons) HV5 (Araluen Road) 24 hour PM10 limit (refer notes) 0.00 Mar-17 Apr-17 May-17 Jun-17 Jul-17 Aug-17 Sep-17 Oct-17 Nov-17 Dec-17 Jan-18 Feb-18 Month Notes: 1. Limit doesn't apply for extraordinary events such as bushfires, prescribed burning, or dust storms. 2. A power outage prevented dust samples being collected from HV4 on 11 June 2017, 28 August 2017, 1 January 2018 and 12 February Figure 3. TEOM (PM10) Results - 12 Month Trend 50.0 TEOM 4 (Araluen Rd) 40.0 TEOM 3 (Wollar) hour PM10 Limit (refer Notes) Mar 01-Apr 01-May 01-Jun 01-Jul 01-Aug 01-Sep 01-Oct 01-Nov 01-Dec 01-Jan 01-Feb Month Notes: 1. Limit dosen't apply for extraordinary events such as bushfires, prescribed burning or dust storms 2. Elevated PM10 dust levels recorded by both TEOMs 3 & 4 on 17 Feb 2017 caused by Kains Flat bushfire. 3. Elevated PM10 dust levels on 10 April 2017 due to regional dust event - refer PM10 dust levels recorded by EPA on page 6 of this report. 4. TEOM 3 (Wollar Village) taken offline for repairs June 31 to July TEOM 4 (Araluen Rd) influenced by dust from Araluen Road generally during stable atmospheric conditions (i.e. temperature inversions) 6. TEOM 3 (Wollar Village) replaced 27 December Page 5 of 17

6 Shown below and for comparison with Figures 2 and 3 is the 24Hr Av. PM 10 dust levels recorded at Bathurst and Merriwa by NSW EPA from 1 March 2017 to 28 February Page 6 of 17

7 Surface Water Monitoring Surface water runoff is isolated and diverted around disturbed areas through the construction of water diversion bunds. Runoff from disturbed areas is diverted into on-site water retention dams. A Reverse Osmosis (RO) Plant treats all water from the retention dams before it is discharged to Wilpinjong Creek. The EPL specifies limits for the quantity and quality of water that may be discharged from the site. A summary of the water analysis results for the month is provided in Table 2. Table 2 EPL ID No. 24 Monitoring Point ID. RO Plant Discharge Pollutant Conductivity Unit of Measure microsiemens per centimetre (us/cm) Monitoring Frequency required by EPL Continuous during discharge No. of times measured during month Min. Value Max. Value Mean Value Measurement Limit Exceed n (yes/no) No Date Last Sampled Date Reported Oil and Grease milligrams per litre (mg/l) Weekly during any discharge No 12/01/18 ph ph Unit Continuous during discharge No Total Suspended Solids milligrams per litre (mg/l) Weekly during any discharge No 12/01/18 Volume discharged megalitres per day Continuous during discharge No Notes: During February the RO Plant did not operate and as such there was no water discharge to Wilpinjong Creek. Page 7 of 17

8 Noise Monitoring Environmental noise monitoring ( monitoring ) is carried out on a monthly basis. The purpose of the monitoring is to assess whether mining operations are consistent with the objectives of the EPL and the development consent conditions. In terms of this monitoring, it is undertaken: by an independent noise consultant; during the night-time; and at the sites shown in Figures 6 and 7. On pages 9, 10 and 11 of this report are the noise levels and findings from the consultant s environmental noise monitoring report (noise monitoring report). Page 8 of 17

9 Page 9 of 17

10 Page 10 of 17

11 Wilpinjong Coal received the noise monitoring report from Global Acoustics Pty Ltd on 11 March Page 11 of 17

12 Blasting Monitoring is carried out near sensitive locations during blasting activities to determine the vibration in the air (overpressure) and earth (ground vibration). A summary of the results of this monitoring, and the limits specified in the EPL, are shown in Tables 3 and 4. Figure 4 shows the actual overpressure and vibration levels recorded during the month. Table 3 Overpressure Monitoring Results Location Month Number of Blasts Minimum overpressure (db(l)) Maximum overpressure (db(l)) Mean overpressure (db(l)) EPL overpressure Limits (db(l)) Exceedance (yes/no) Approx. 50m west of the Wollar Public School February dB (95% blasts) 120 db (100% blasts) no Table 4 Vibration Monitoring Results Location Month Number of Blasts Minimum vibration (mm/sec) Maximum vibration (mm/sec) Mean vibration (mm/sec) EPL vibration Limits (mm/sec) Exceedance (yes/no) Approx. 50m west of the Wollar Public School February mm/s (95% blasts) 10 mm/s (100% blasts) no Page 12 of 17

13 Overpressure (dbl) Vibration (mm/sec) Figure 4. Overpressure (dbl) and Vibration (mm/sec) recorded during Month 120 EPL Limit: 120 dbl EPL Limit: 10 mm/sec Feb 25-Feb 24-Feb 23-Feb 22-Feb 21-Feb 20-Feb 19-Feb 18-Feb 17-Feb 16-Feb 15-Feb 14-Feb 13-Feb 12-Feb 11-Feb 10-Feb 09-Feb 08-Feb 07-Feb 06-Feb 05-Feb Date Overpressure (dbl) Vibration (mm/s) Page 13 of 17

14 Weather Monitoring Continuous weather monitoring occurs onsite at the location shown on Figures 5 and 6 (Meteorological Station). The Meteorological Station continuously monitors for: rainfall; relative humidity; temperature (i.e. at 2m, 10m & 60m), barometric pressure, wind speed, wind direction and temperature lapse rate. The temperature lapse rate is a measure of stable atmospheric conditions and is determined by measuring air temperature at two elevations 58m apart (i.e. 2m and 60m from ground level) and extrapolating the temperature difference over 58m to determine the lapse rate per o C/100m. Table 5 shows the meteorological data recorded during the month. Table 5 Temperature ( o C) Humidity (%) Prevailing Wind Rain Bar Lapse Rate Date 2m 10m 60m Speed Dir (mm) (hpa) (oc/100m) Avg Min Max Avg Min Max Avg Min Max Avg Min Max Avg Min Max (Deg) Max 1/02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ /02/ Page 14 of 17

15 Figure 5 Air (Dust) Monitoring Locations Page 15 of 17

16 Figure 6 Attended Noise Monitoring Locations Page 16 of 17

17 Figure 7 Wollar Village Environmental Monitoring Sites Page 17 of 17