SAFETY DATA SHEET. professional, scientific and technical activities: other professional, scientific and technical activities

Transcription

1 SAFETY DATA SHEET 1. Identification Product identifier Other means of identification Product code 2645 Recommended use Recommended restrictions AMBERLITE IRA-400 (CL), ION-EXCHANGE RESIN professional, scientific and technical activities: other professional, scientific and technical activities ne known. Manufacturer/Importer/Supplier/Distributor information Manufacturer Company name GFS Chemicals, Inc. Address P.O. Box 245 Powell, OH United States Telephone Phone Toll Free Fax Website Emergency phone number 2. Hazard(s) identification Physical hazards Health hazards Environmental hazards OSHA defined hazards Emergency Assistance Chemtrec Label elements Hazard symbol Signal word Hazard statement Precautionary statement Prevention Response Storage Disposal Hazard(s) not otherwise classified (HNOC) Supplemental information ne. ne. The substance does not meet the criteria for classification. Observe good industrial hygiene practices. Wash hands after handling. Store away from incompatible materials. Dispose of waste and residues in accordance with local authority requirements. ne known. ne. 3. Composition/information on ingredients Substances Chemical name AMBERLITE IRA-400 (CL), ION-EXCHANGE RESIN Common name and synonyms CAS number % Constituents Chemical name CAS number % WATER *Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret. 4. First-aid measures Inhalation Skin contact Move to fresh air. Wash off with soap and water. Get medical attention if irritation develops and persists. 1 / 6

2 Eye contact Ingestion Most important symptoms/effects, acute and delayed Indication of immediate medical attention and special treatment needed General information Flush eyes with water as a precaution. Have victim rinse mouth thoroughly with water. Treat symptomatically. Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. 5. Fire-fighting measures Suitable extinguishing media Use extinguishing agent suitable for type of surrounding fire. Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2). Unsuitable extinguishing media Specific hazards arising from the chemical Special protective equipment and precautions for firefighters Fire fighting equipment/instructions Specific methods General fire hazards Do not use water jet as an extinguisher, as this will spread the fire. ne known. 6. Accidental release measures Personal precautions, protective equipment and emergency procedures Methods and materials for containment and cleaning up Environmental precautions 7. Handling and storage As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Move containers from fire area if you can do it without risk. Use water spray to cool unopened containers. Use standard firefighting procedures and consider the hazards of other involved materials. unusual fire or explosion hazards noted. Keep unnecessary personnel away. Resin pellets spilled on the floor may cause slippery conditions. For personal protection, see section 8 of the SDS. Sweep up to prevent slipping hazard. The product is immiscible with water and will sediment in water systems. Stop the flow of material, if this is without risk. Sweep up or gather material and place in appropriate container for disposal. Avoid dust formation. Following product recovery, flush area with water. After removal flush contaminated area thoroughly with water. For waste disposal, see section 13 of the SDS. Avoid discharge into drains, water courses or onto the ground. Precautions for safe handling Observe good industrial hygiene practices. Conditions for safe storage, including any incompatibilities 8. Exposure controls/personal protection Store in original tightly closed container. Store away from incompatible materials (see Section 10 of the SDS). Occupational exposure limits exposure limits noted for ingredient(s). Biological limit values Appropriate engineering controls biological exposure limits noted for the ingredient(s). General ventilation normally adequate. Individual protection measures, such as personal protective equipment Eye/face protection Wear safety glasses with side shields (or goggles). Skin protection Hand protection Other Respiratory protection Thermal hazards General hygiene considerations Wear appropriate chemical resistant gloves. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. Wear appropriate thermal protective clothing, when necessary. Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. 9. Physical and chemical properties Appearance Physical state Solid. 2 / 6

3 Odor Form Color Odor threshold ph Beads. Amber. Amine-like. Melting point/freezing point Initial boiling point and boiling range Flash point Evaporation rate Flammability (solid, gas) 212 F (100 C) Upper/lower flammability or explosive limits Flammability limit - lower (%) Flammability limit - upper (%) Explosive limit - lower (%) Explosive limit - upper (%) Vapor pressure Vapor density Relative density Solubility(ies) Solubility (water) Partition coefficient (n-octanol/water) Auto-ignition temperature Insoluble. Decomposition temperature Viscosity Other information Molecular formula Percent volatile Specific gravity Stability and reactivity Reactivity Chemical stability Possibility of hazardous reactions Conditions to avoid Incompatible materials Hazardous decomposition products C12H18N 11. Toxicological information Information on likely routes of exposure Inhalation Skin contact Eye contact Ingestion Symptoms related to the physical, chemical and toxicological characteristics Information on toxicological effects Acute toxicity % Water content. The product is stable and non-reactive under normal conditions of use, storage and transport. Material is stable under normal conditions. Hazardous polymerization does not occur. Contact with incompatible materials. Strong oxidizing agents. Nitric acid hazardous decomposition products are known. adverse effects due to inhalation are expected. adverse effects due to skin contact are expected. Expected to be a low ingestion hazard. 3 / 6

4 Product Species AMBERLITE IRA-400 (CL), ION-EXCHANGE RESIN (CAS ) Acute Dermal LD50 Rabbit Oral LD50 Rat Test Results > 5000 mg/kg For compositionally similar materials. > 5000 mg/kg For compositionally similar materials. * Estimates for product may be based on additional component data not shown. Skin corrosion/irritation Serious eye damage/eye irritation Respiratory or skin sensitization Respiratory sensitization Skin sensitization Germ cell mutagenicity Carcinogenicity Prolonged skin contact may cause temporary irritation. Prolonged or repeated contact can result in defatting and drying of the skin which may result in skin irritation and dermatitis (rash). data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic. This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA. IARC Monographs. Overall Evaluation of Carcinogenicity US. National Toxicology Program (NTP) Report on Carcinogens Reproductive toxicity Specific target organ toxicity - single exposure Specific target organ toxicity - repeated exposure Aspiration hazard 12. Ecological information Ecotoxicity This product is not expected to cause reproductive or developmental effects. Persistence and degradability ne known. Bioaccumulative potential Mobility in soil Other adverse effects 13. Disposal considerations Disposal instructions Local disposal regulations Hazardous waste code Waste from residues / unused products Contaminated packaging 14. Transport information DOT t regulated as dangerous goods. IATA t regulated as dangerous goods. IMDG t regulated as dangerous goods. This material is not expected to be harmful to aquatic life. data available. data available. other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component. Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose in accordance with all applicable regulations. The waste code should be assigned in discussion between the user, the producer and the waste disposal company. Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Empty containers should be taken to an approved waste handling site for recycling or disposal. Since emptied containers may retain product residue, follow label warnings even after container is emptied. Offer rinsed packaging material to local recycling facilities. 4 / 6

5 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code t applicable. 15. Regulatory information US federal regulations All components are on the U.S. EPA TSCA Inventory List. This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR TSCA Section 12(b) Export tification (40 CFR 707, Subpt. D) CERCLA Hazardous Substance List (40 CFR 302.4) SARA 304 Emergency release notification Superfund Amendments and Reauthorization Act of 1986 (SARA) Hazard categories Immediate Hazard - Delayed Hazard - Fire Hazard - Pressure Hazard - Reactivity Hazard - SARA 302 Extremely hazardous substance SARA 311/312 Hazardous chemical SARA 313 (TRI reporting) Other federal regulations Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR ) Safe Drinking Water Act (SDWA) US state regulations US. California Controlled Substances. CA Department of Justice (California Health and Safety Code Section 11100) US. Massachusetts RTK - Substance List US. New Jersey Worker and Community Right-to-Know Act US. Pennsylvania Worker and Community Right-to-Know Law US. Rhode Island RTK US. California Proposition 65 California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. International Inventories Country(s) or region Inventory name On inventory (yes/no)* Australia Australian Inventory of Chemical Substances (AICS) Canada Canada China Europe Europe Japan Domestic Substances List (DSL) n-domestic Substances List (NDSL) Inventory of Existing Chemical Substances in China (IECSC) European Inventory of Existing Commercial Chemical Substances (EINECS) European List of tified Chemical Substances (ELINCS) Inventory of Existing and New Chemical Substances (ENCS) 5 / 6

6 Country(s) or region Inventory name On inventory (yes/no)* Korea New Zealand Philippines United States & Puerto Rico Existing Chemicals List (ECL) New Zealand Inventory Philippine Inventory of Chemicals and Chemical Substances (PICCS) Toxic Substances Control Act (TSCA) Inventory *A "" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) A "" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s). 16. Other information, including date of preparation or last revision Issue date Version # 01 December Disclaimer Revision Information GFS Chemicals cannot anticipate all conditions under which this information and its product, or the products of other manufacturers in combination with its product, may be used. It is the user s responsibility to ensure safe conditions for handling, storage and disposal of the product, and to assume liability for loss, injury, damage or expense due to improper use. The information in the sheet was written based on the best knowledge and experience currently available. Product and Company Identification: Physical States Composition / Information on Ingredients: Ingredients Toxicological Information: Toxicological Data Regulatory Information: United States HazReg Data: International Inventories 6 / 6