GREENERGIZE your packaging

Transcription

1 GREENERGIZE your packaging 1

2 PCM Phase Change Material From Wikipedia A phase change material (PCM) is a substance with a high heat of fusion. It is capable of storing and releasing large amounts of energy while melting and solidifying at a certain temperature. Heat is absorbed when the material changes from solid to liquid and released when the state changes from liquid to solid; thus, PCMs are classified as latent heat storage (LHS) units. Phase change occurs at a relatively constant temperature. 2

3 GREENERGIZE your packaging 3

4 PCM a sustainable technology Consumption of PCM products on large scale is expected to reduce energy demand by up to 50% by 2050 By incorporating PCM in different applications, companies can earn 10-20times more carbon credits compared to other green material Most of the available PCM have a long operating life of about 20 to 30 years and need very little maintenance PCM have 5 to 6 times more heat storage capacity compared to other materials Source: Advanced Phase Change Material (PCM) Market Global Forecast ( ) by MarketsandMarkets 4 4

5 Types of Phase Change Materials Inorganic Salt Hydrates Organic Petroleum Based Latent Heat Toxicity Flammability Corrosion Stability Renewable Biodegradable 5 5 High Non-Toxic Non-Flammable Yes Yes Yes water based High Toxic Yes N/A Yes No N/A Organic Biobased High Non-Toxic Yes N/A Yes Yes Yes

6 savenrg Phase Change Material Inorganic salt hydrates, organic materials & bio-based 6 High latent heat storage Economical cost Non-toxic and non-combustible Low or no flammability Stable performance during phase-change cycles Energy is stored both as latent heat & sensible heat High stability over long period of time and cycles Limited or no super cooling Macro-encapsulated & Micro-encapsulated products

7 savenrg Phase Change Material Latent Heat KJ/Kg 7

8 savenrg Phase Change Material Kg/KWh 8

9 PCM for Energy Storage PCM based Latent Heat Storage technology enables thermal energy storage that can be used for heating or cooling needs when and where needed. 9 9

10 PCM for Temperature Control PCM based Latent Heat Storage technology allows for temperature control within +/5 degree Celsius of phase change temperature

11 PCM Applications POSITIVE TEMPERATURE APPLICATION NEGATIVE TEMPERATURE APPLICATION Chilled Food Transportation Temperature Controlled Packaging Beverage Cooling & Vending Machines Frozen Food Transportation Medicine & Vaccine transportation Ice Cream Vending Air Conditioning, Passive Cooling in buildings Medicine & Vaccine transportation Water Heating, Solar Thermal Storage, Waste Heat Storage, Heat Sink Marine Refrigeration Telecommunication Shelter Cooling, Electronic Enclosure Cooling, Battery Cooling Cold Storage Thermal Energy Storage.

12 PCM for Temperature Controlled Packaging The industry uses the gel-pack; ice and dry-ice Consumers are looking for better methods to: control temperature reduce shipping weight reduce packaging waste reduce carbon footprint Some are using qualified containers which use higher quality insulating material and PCM for effective temperature control

13 savenrg PCM Advantages Saves Energy sharp phase change temperature negligible super cooling stores energy during off peak Predictable and large energy storage PCM quantity can be calculated to optimize shipping weight predictable duration of temperature control Enables temperature control within +/- 5 degree C Increase Payload capacity Safe for Transportation - Non-Toxic and Non-Combustible Economical & Eco-friendly & Recyclable

14 savenrg PCM Encapsulation Performance Specifications: - Effective reinforcement to restrain the walls against swelling - When frozen and laid flat, the packs do not exceed the uniform thickness by more than 25% (any deformation is reversible) - Packs withstand one meter drop onto every face, edge and corner when frozen to -25 C and cooled to +5 C - Unfrozen packs, including cap, can resist a lateral force of 80Kg - Packs are constructed of uncolored translucent material General Specifications: - Packs do not bond together when stacked and frozen in bulk Packs and cap made of UV resistant and environmentally friendly material Environmental Specifications: Ambient temperature range during transport, storage and use -30 to 55 degree C - Ambient humidity range during transport, storage and use 5% to 95% RH

15 savenrg PCM Range of Products savenrg - Ice-Packs (IP) Temperature control < 15ºC savenrg - Cool-Packs (CP) Temperature control from +2ºC to +8º C savenrg - Warm-Packs (WP) Controlled Room Temperature from +18ºC to +26ºC 15 15

16 savenrg PCM Ice - Packs Ideal to transport products at temperatures below -15 C. Uses PCM23N Freeze completely at temperatures below -28 C. Latent heat capacity of 200KJ/Kg. Safe substitute for Dry Ice and propylene glycol Non-toxic and non flammable Tested for 3000 cycles 16 16

17 PCM 23N for Ice - Packs T-History Temp in Deg Cel Bath PCM 23N Time in Min

18 PCM 23N for 24Hr Winter Below -15C in 12 x9 x9 Qualified Shipper ISTA7D 18 18

19 PCM 23N for 24Hr Summer Below -15C in 12 x9 x9 Qualified Shipper ISTA7D 19 19

20 savenrg PCM Cool - Packs Ideal to transport products between +2 C to +8 C. Uses PCM00P Freezes completely at temperatures below -3 C. No super cooling required. Latent Heat Storage capacity 290KJ/Kg Energy efficient alternate to traditional gel based cool packs. Non-toxic and non flammable. Tested for 5000 cycles 20 20

21 PCM 00P for Cool - Packs T-History 30 Temp in Deg Cel Bath PCM 00P Time in Min

22 PCM Cool Pack Application Box Size (L x W x H): 16 x 12 x 12 Insulation thickness : 2 inch Insulation material : EPS Panels TSM6 (LxWxH): 165x95x35mm PCM quantity : 1.0 kg (in 2 containers) Fros t Pe rform ance w ith TSM 6 in12x12x16box 25 Temp in Deg C Ambient TSM6-Readings ( C) Tim e in hours 40 45

23 PCM 00P for 24Hr Summer +2 to +8 C in 12 x9 x9 Qualified Shipper ISTA7D 23

24 savenrg PCM Warm - Packs Ideal to transport products at controlled room temperature. PCM 22P Completely freeze at temperatures below +16 C. Latent Heat Storage capacity 185KJ/Kg In hot ambient shipping environments, maintain temperatures between +22 C and +27 C In cold ambient shipping environments, maintain temperatures between +18 C and +22 C. Non-toxic and non- flammable Tested for 3000 cycles 24 24

25 PCM 22P for Warm - Packs T-History 27 Temp in Deg C Time in Min PCM 22P BATH

26 PCM Warm Pack Application Box Size (LxWxH): 16 x12 x12 Insulation thickness : 2 inch Insulation material : EPS Panels TSM6 (LxWxH): 190x120x36mm PCM quantity : 1.5 kg (in 2 TSM6 Bottles) 22P PCM Performance in EPS Box (TSM6 Pack) 23 Temp in Deg C Am bient Tem p 4 6 Inside EPS Box Time in hours

27 PCM 22P for 24Hr Winter 18C in 12 x9 x9 Qualified Shipper ISTA7D 27 27

28 savenrg PCM Product Specifications 28 28

29 R & D Services Development of customized PCM product Selection and sizing of PCM for insulated shippers 29 29

30 Thank you Phase Change Materials RGEES LLC 1465 Sand Hill Road, Suite # 171, Candler, NC United States of America Tel: info@rgees.com