OSHA 1994 AND FMA Chapter 4 (cont.)

Transcription

1 OSHA 1994 AND FMA 1967 Chapter 4 (cont.)

2 OSHA 1994 The aims of this Act are to secure the safety, health and welfare of persons at work against risks to safety or health arising out of the activities of persons at work to protect person at a place of work other than persons at work against risks to safety or health arising out of the activities of persons at work to promote an occupational environment for persons at work which is adapted to their physiological and psychological needs

3 to provide the means whereby the associated occupational safety and health legislation may be progressively replaced by a system of regulations and approved industry codes of practice operating in combination with the provisions of this Act designed to maintain or improve the standards of safety and health.

4 IMPORTANCE OF THE ACT The Act is necessary to overcome the limitations of the Factories and Machinery Act 1967 (FMA 1967) in the following aspects: Scope of Application Prescriptive Provisions Approach

5 Scope of Application The scope of FMA 1967 only covers 24 percent of the total labor workforce (i.e. 6.8 million in year 1980) nationwide. Those protected are workers in the sectors defined as a factory namely: Manufacturing Mining and Quarrying Construction

6 Prescriptive Provisions The Factories and Machinery Act 1967 (FMA 1967) provides prescriptive provisions, of which, over time, became irrelevant. The provisions provide in detail the necessary actions to be taken to prevent occurrence of accidents. For example, the provision requires all machinery parts to be strictly guarded according to the specifications stated under the Factories and Machinery (Fencing of Machinery and Safety) Regulations 1970.

7 Approach The approach of the Act was based on the traditional method of using a checklist system. The checklist system puts emphasis on workers, system of work, machineries and working environment by preventing accidents and industrial diseases. This approach gave the impression that the responsibility of occupational safety and health purely lies in government controls, resulting in industries becoming too dependent on the government regulations.

8 At the same time, accident statistic in other sectors were high not covered under the FMA 1967 recorded alarming rates, especially fatality and permanent disability cases. This urged the government to draft an additional piece of law in order to control these activities.

9 PHILOSOPHY AND PRINCIPLES The philosophy and principles of this Act differs from the prescriptive nature of the Factories and Machinery Act. The Act address the responsibility to ensure a safe and healthy workplace lies with those who create the risk and those who work with the risk. This philosophy advocates three main principles: Self regulation Consultation Worker cooperation and participation

10 The provision of the Occupational Safety and Health Act 1994 are based on the self-regulation scheme. Its primary responsibility is to ensure safety and health of work lies with those who create the risks and those who work with the risks. Through self-regulating scheme that is designed to suit the particular industry or organization, this Act also aims to establish effective safety and health organization and performance. The concept of self-regulation encourages cooperation, consultation and participation of employees and management in efforts to upgrade the standards of safety and health at the workplace. The Occupational Safety and Health Act 1994 is enforced by the Department of Occupational Safety and Health (DOSH), a government department under the Ministry of Human Resources Malaysia.

11 FACTORIES AND MACHINERY ACT 1967 (ACT 139) The Factories and Machinery Act was enacted in 1967 as Act 64. It was revised on 1 st April 1974 and amended to the Laws of Malaysia Act 139. The objectives of the Act: To provide control on factories to secure safety, health and welfare of person therein For the purpose of registration and inspection of machinery and for matters connected therewith

12 Application OSHA 1994 supersedes the FMA 1967 in the event of any conflict FMA 1967 applies to mainly factories and construction sites FMA and OSHA enabling act (give power to minister to gazette detail regulations) Contains some general provision on safety, health and welfare

13 Application FMA-limited to manufacturing industry, mining and quarrying and construction do not contain detail provisions on specific matters Detail provisions are stipulated under the regulations

14 Arrangement FMA 1967 divided into 6 parts: Part 1: Preliminary Part 2: Safety, health and welfare Part 3: Persons-in-charge and certificates of competency Part 4: Notification of accidents, dangerous occurrence and dangerous diseases Part 5: Notice of occupation of factory and registration and use of machinery Part 6: General

15 Part 1: Preliminary Definition of a factory: There must be premises and its boundaries can be defined; Within the premises there is manual labor doing process The process must involve the making, altering, repairing, ornamenting, finishing, cleaning, washing, breaking up demolition or adapting for sale any article; and Part I building operations, hoisting machine, machinery, steam The processes must be for trading.

16 Factory may be defined as any premises or part of a premises where trade for the purposes of gain to any business, where 5 or more persons employed. Factory covers all places of work using machinery including building operations and works of engineering construction.

17 Part 2: Safety, Health and Welfare Key points: Premises must be structurally sound with safe access to work areas, materials and goods must be safely stacked (Section 10) Machinery must be of sound construction and dangerous parts must be fenced(section 14, 15, 16) Employees must not misuse safety and health equipment(section 20) Employees not to endanger himself or other person

18 Premises must be kept in clean state, with adequate work space, ventilation, lighting and toilets (Section 22) Persons must be supplied with adequate facilities for clothing, storage, drinking, water, first aid and washing facilities (Section 25) Employees must be trained on the safety of machinery (Section 26)

19 Part 3: Persons-in-charge and Certificates of Competency Key points: Machinery operators must be adequately trained or under the supervision of a trained person (Section 26); Young persons (< 16 years) must not operate machinery (Section 28)

20 Part 4: Notification of Accidents, Dangerous Occurrence and Dangerous Diseases The occupier must notify the nearest inspector of accidents and diseases. Accidents include: Loss of life; Injury to a person who loses more than 4 days work (loss time injury LTI); Serious damage to machinery or other property (Section 31). Inspectors may investigate accidents and dangerous occurrence and hold enquiries into more serious cases (Section 33)

21 Part 5: Notice of Occupation of Factory and Registration and Use of Machinery NotifyDepartment of Occupational Safety ad Health (DOSH) within 3 months of the intended start date (Section 34) Building operations must be notified if last more than 6 weeks(section 35) Changes to the use of factory or machinery must be notified to DOSH Fills a standard form together with (a) layout plan of the factory; (b) list of products to be manufactured; (c) list of machines to be used; (d) list of chemicals, toxic or flammable substances to be used, and (e) detail flow chart of the processes.

22 Part 6: General General penalty RM2, Certain sections is RM5, (Section 51) Or imprisonment not exceeding 2 years Or both

23 Schedules Schedule 1 Defines dangerous occurrencesto machinery that need to be notified Schedule 2 Describes the types of injury that may be classified as serious bodily injury Schedule 3 Lists notifiable industrial diseases

24 Regulations under the Act Factories and Machinery (Certificates of Competency Examinations) Regulations, 1970 Factories and Machinery (Electric Passenger and Goods Lift) Regulations, 1970 Factories and Machinery (Fencing of Machinery and Safety) Regulations, 1970 Factories and Machinery (Notification of Fitness and Inspections) Regulations, 1970 Factories and Machinery (Person-In-Charge) Regulations, 1970 Factories and Machinery (Safety, Health and Welfare) Regulations, 1970 Factories and Machinery (Steam Boiler and Unfired Pressure Vessel) Regulations, 1970

25 Factories and Machinery (Administration) Regulations, 1970 Factories and Machinery (Compounding of Offences) Rules, 1978 Factories and Machinery (Compounding of Offences) Regulations, 1978 Factories and Machineries (Lead) Regulations, 1984 Factories and Machineries (Asbestos Process) Regulations, 1986 Factories and Machinery (Building Operations and Works of Engineering Construction) (Safety) Regulations, 1986 Factories and Machinery (Noise Exposure) Regulations,1989 Factories and Machinery (Mineral Dust) Regulations, 1989