EEMUA CompEx - the world s pre-eminent IEC Ex scheme for personnel competency development and certification
|
|
- Paulina Baldwin
- 6 years ago
- Views:
Transcription
1 Briefing Paper from EEMUA August 2013 EEMUA CompEx - the world s pre-eminent IEC Ex scheme for personnel competency development and certification Summary Potentially flammable or explosive atmospheres occur in a wide range of industrial sectors from oil & gas to chemicals, food, drink and pharmaceuticals manufacture, mining, waste water treatment and others, as well as in the retail sector such as fuel filling stations. Failure to ensure safe working practices in these circumstances could result in the ignition of explosive gases or dust clouds leading to injury or even fatalities. Based upon the IEC Standards, primarily 60079: 10; 14 & 17, and UKAS accredited to ISO 17024, EEMUA CompEx is the global solution for Competency Validation and Certification for electrotechnical, mechanical and multi-skilled technicians as well as professional engineers working in potentially hazardous or explosive atmospheres. Key elements of the CompEx scheme are: Based upon the IEC Standards, primarily 60079: 10; 14 & 17. Determines Core Competency by checking both the underpinning knowledge by examination and practical skills and ability by assessment. Over 40,000 CompEx Certificates of Core Competency issued since UKAS accredited to ISO Unrivalled breadth and depth: 12 distinct CompEx Units including Electrical, Mechanical, and Application Design Engineer. Worldwide over 25 CompEx Licensed Centres including Europe, Asia and Americas. Delivered in English and Dutch. Taking into account local Regulations, Directives and national variations in Standards. CompEx Scheme Governance secures impartiality by representation from major International Users in the Oil, Gas and Chemical industry; Employers; Contractors; Unions; Regulators; the Certification Body and others.
2 Introduction to EEMUA CompEx Further to the July 1988 Piper Alpha Offshore disaster in the North Sea, the investigation report led by Lord Cullen, recommended that employers ensure the Competency of Personnel for all workers that they employ. In the UK, the Electricity at Work Regulations (1989) made this a mandatory requirement and increased the standards necessary to ensure the competency of personnel, thereby increasing workplace safety in potentially hazardous environments. These new legal requirements brought about the need to provide a competency scheme that would both assess the underpinning knowledge (theory) and the competency validation (practical assessment) of individuals under one scheme and the associated Core Competency Certificate that would be obtained by successful practitioners. As a result, the Engineering Equipment and Material Users' Association (EEMUA) and JTL, the UK's leading work based learning provider, worked together with the Health and Safety Executive (HSE) and Electrical Contractors Association (ECA), to successfully launch the CompEx competency validation initiative in 1993, in London and Glasgow. Significantly, CompEx competency is certificated only to individuals who: Meet the necessary entry criteria for the CompEx modules. Pass the underpinning knowledge theory examinations. Pass the competency validation test in the form of a practical assessment saw the birth of the first CompEx Centre at Aberdeen College in Aberdeen, Scotland. There is now an international network of licensed CompEx centres that provide CompEx training and assessment leading to core competency validation certification across the globe, from Aberdeen down to Sasolburg, South Africa and from Houston across to Singapore. No matter where you are in the world, there is always a CompEx centre within reach. Since its inception, over 40,000 CompEx Certificates of Core Competency have been issued, all contributing to increased safety awareness in the workplace. This achievement underlines the position of CompEx as by far the world s most important international Ex personnel certification scheme. The EEMUA CompEx personnel competency scheme CompEx is the global solution for Competency Validation and Certification for electrotechnical, mechanical and multi-skilled craftpersons as well as professional engineers working in potentially hazardous or explosive atmospheres. The IEC International Standards primarily ; 14 & 17 are at the heart of all CompEx delivery to ensure international conformity and harmonisation of safe working practices. The CompEx scheme also reflects established national and regional legislation and regulation such as the EU-ATEX Directives. In addition, CompEx is operated by a Certification Body JTL, which is formally accredited by UKAS in accordance with the International Standard ISO/IEC 17024:2003 Conformity Assessment General requirements for bodies operating certification of persons.
3 A CompEx module includes all training and assessments and upon success, candidates receive a CompEx Certificate of Core Competency. Each certificate is valid up to a period of five years, depending on the changes to International, European and British Standards. The CompEx Scheme Governance secures impartiality by representation from major International Users in the Oil, Gas and Chemical industry; Employers; Contractors; Unions; Regulators; the Certification Body and others. CompEx is an integral part of a global solution for the competence route to safety as can be seen in Figure 1 below. Source: EEMUA. Figure 1. The role of CompEx in the global competency route to safety. Figure 1 illustrates the relationship between the various elements in the global competency route to safety. Broadly speaking, these are: Users Group (such as EEMUA) participation in development and interpretation of Directives (e.g. ATEX) and standards (e.g. IEC Ex Standards). Product safety & quality addressed by testing and certification. Equipment installation, inspection and maintenance CompEx Certification for Electrical, Mechanical and Multi-skilled operatives. Workplace area / systems design and management CompEx certification for professional engineers.
4 Unrivalled breadth and depth with CompEx The 12 modules of competency validation that are defined within CompEx produce an IEC Ex scheme of unrivalled breadth and depth, allowing certification for a wide range of personnel and situations: Electrical, mechanical and multi-skilled craftspeople. Professional engineers responsible for the design and installation of applications and systems for hazardous Ex areas. Managers who oversee the operation of these installations. Specially tailored modules for specific sectors: fuel filling stations; the water and wastewater industries; flour mills, coal and other dusty environments besides the oil and gas industry, offshore and onshore, chemical and pharmaceutical industries. Please see Appendix I for a full list of CompEx Modules. International and multi-lingual delivery CompEx is now delivered via a growing number of Licensed Competency Validation Centres around the world: from Africa and the Middle-East, to America, Asia, Australasia and Europe, see Figure 2 below. CompEx is currently delivered in English and Dutch with other languages planned. Discussions are currently underway to investigate how the CompEx global solution to safety can best be operated in other parts of the world that do not follow IEC Standards. Figure 2. Locations of existing and planned CompEx Licensed Centres. Source: EEMUA. Please see Appendix II for a full list of CompEx Licensed Competency Validation Centres. Guaranteed to be most effective CompEx is most effective because it combines formal learning and knowledge examination with practical assessment to determine overall core competency. The effectiveness of CompEx is also assured by being owned and overseen by user companies who have a vested interest in ensuring safety in the workplace
5 Appendix I The CompEx Modules CompEx Modules for Competency Certification ExF Foundation Unit Ex01-02 Ex03-04 Ex05-06 Ex07-08 Ex09-10 Ex11 Ex12 The preparation, installation, maintenance and inspection of Ex d, n, e and p apparatus in potentially explosive atmospheres The preparation, installation, maintenance and inspection of Ex i systems in potentially explosive atmospheres The preparation, installation, maintenance and inspection of electrical apparatus for use in the presence of combustible dusts The preparation, installation, de-commissioning, inspection, testing and maintenance of electrical installations at fuel filling stations The preparation, installation, maintenance and inspection of Ex d, n, e, p and i apparatus in potentially explosive atmospheres within the water industry The preparation, installation, maintenance and inspection of mechanical apparatus in potentially explosive atmospheres The design, management and approval of applications and systems for hazardous areas
6 Appendix II Licensed CompEx Competency Validation Centres International Licensed CompEx Centres Name of Centre TTE-Petrofac ProtEx Ltd (Mobile) Quercus Technical Services BV STC (Service & Technology Centre Petrotec) ATEC MOXI PTE Ltd ATTS - Asia (Assets Training & Technical Services PTE Ltd) Hazloc (Intertek) Intertek Ltd ATEC Training & Certification Services OCS Training Institute Location Baku, Azerbaijan Egypt & Tunisia Goes & Zwolle, Netherlands Doha, Qatar Singapore Singapore Sasolburg, South Africa Dubai, UAE & USA Houston, Texas Houston, Texas UK Licensed CompEx Centres Name of Centre ASET EPIT Group Ltd Prospects Training Solutions Ltd NETA Training Group Intertek TTE Training Ltd Forth Valley College HOTA Lowestoft College Roxby Training Solutions Ltd TTE Technical Training Group Hornbill Industrial Training Hornbill / Pembrokeshire College Seta Ltd P & R Hurt Location Aberdeen Aberdeen Basildon Billingham Chester & Grangemouth Ellesmere Port Falkirk Hull Lowestoft Middlesbrough Middlesbrough Neath Pembrokeshire Southampton Yeovil
7 For enquiries, contact John Lilley, Electrical Engineering, Instrumentation and Control Topic Lead, EEMUA or +444 (0) Notes EEMUA - Leadership in Industrial Asset Management EEMUA, the Engineering Equipment and Materials Users' Association, is an international non-profit membership organisation that aims to improve the safety, environmental and operating performance of industrial facilities in the most cost-effective way, developing and promoting leadership in industrial asset management. Member companies manage process plants, refineries, power stations and utilities, offshore platforms, storagee terminals and other industrial facilities around the world (engineering assets worth billions of Euros). EEMUA members pursue p their aims by sharing engineeringg experiences and expertise, and by the promotion of their distinct interests as the users of engineering products. CompEx is a registered trademark and egistered certification mark of EEMUA. CompEx scheme website: Copyright EEMUA, WORK SAFELY IN EEMUA is an official partner p of the EU-OSHA Workplaces Campaignn on Risk Prevention
The essential guide to the mandatory knowledge, skills and competencies required for personnel designing for or working in hazardous areas
The essential guide to the mandatory knowledge, skills and competencies required for personnel designing for or working in hazardous areas Based on IEC 60079-14 and IEC 60079-17 2 nd Edition, April 2013
More informationSAFETY THROUGH COMPETENCY STATEMENT OF CAPABILITIES
0 SAFETY THROUGH COMPETENCY STATEMENT OF CAPABILITIES 1 COPYRIGHT All rights to this publication are reserved. No part of this publication may be copied, reproduced, transmitted or stored in any form or
More informationEX SCHEME IMPLEMENTATION - PETRONAS EXPERIENCE
EX SCHEME IMPLEMENTATION - PETRONAS EXPERIENCE Presenter : Tiong Kung Sing 2014 PETROLIAM NASIONAL BERHAD (PETRONAS) All rights reserved. No part of this document may be reproduced, stored in a retrieval
More informationISO 45001:2018 Seminar. IOSH Event, Staffordshire - Thursday 16 August 2018
ISO 45001:2018 Seminar IOSH Event, Staffordshire - Thursday 16 August 2018 CONTENTS Introduction to Bureau Veritas Bureau Veritas awarded ISO 45001 global accreditation What is ISO 45001:2018? The migration
More informationCERTIFICATION YOUR ROUTE TO STRONGER BUSINESS PERFORMANCE
CERTIFICATION YOUR ROUTE TO STRONGER BUSINESS PERFORMANCE SUMMARY 01 Why certify? Optimize your organization s performance with certification 02 Bureau Veritas Your certification partner in 140 countries
More informationCenelec Standards Inspections Course Guide
Cenelec Standards Inspections Course Guide CompEx Training Courses Courses Index 4 Introduction 5 Why CSI as a Training Provider 6-7 CompEx Foundation (ExF) 8-11 CompEx EX01-04 Gas and Vapours 12-13 CompEx
More informationPROMOTE A SAFE WORKING ENVIRONMENT WITH ISO 45001: THE NEW OCCUPATIONAL HEALTH AND SAFETY STANDARD
PROMOTE A SAFE WORKING ENVIRONMENT WITH ISO 45001: THE NEW OCCUPATIONAL HEALTH AND SAFETY STANDARD ABOUT SGS INTRODUCTION THE ISO 45001 DEVELOPMENT PROCESS THE IMPORTANCE OF LEADERSHIP THE BENEFITS OF
More informationLevel 3 NVQ Diplomas in Electrotechnical Technology (2357) Qualification handbook for centres
Level 3 NVQ Diplomas in Electrotechnical Technology (2357) Qualification handbook for centres www.cityandguilds.com December 2010 Version 3.3 (November 2012) About City & Guilds As the UK s leading vocational
More informationNEBOSH HSE CERTIFICATE IN PROCESS SAFETY MANAGEMENT BY DISTANCE LEARNING
NEBOSH HSE CERTIFICATE IN PROCESS SAFETY MANAGEMENT BY DISTANCE LEARNING NEBOSH HSE Certificate in Process Safety Management NEBOSH has joined forces with the United Kingdom s Health and Safety Regulator,
More informationLevel 3 Certificate for Traffic Office ( )
Level 3 Certificate for Traffic Office (3438-02) Qualification handbook 501/2233/2 www.cityandguilds.com May 2011 Version 1.2 (July 2011) About City & Guilds As the UK s leading vocational education organisation,
More informationTechnical Skills Training Training Services
29 45 36.69 95 22 9.80 Technical Skills Training Training Services Getting the job done properly Equipping your technicians with the right skills is as much about preparation as it is about the training
More informationUK Oil and Gas Safety Awards Annual Safety Lecture Aberdeen 24 April 2013
UK Oil and Gas Safety Awards Annual Safety Lecture Aberdeen 24 April 2013 Introduction It is a great privilege to have been asked to deliver this year s safety lecture and to participate in the Oil and
More informationLevel 3 NVQ in Logistics Operations Management ( ) Qualification handbook
Level 3 NVQ in Logistics Operations Management (3292-03) Qualification handbook www.cityandguilds.com November 2008 Version 1.0 About City & Guilds City & Guilds is the UK s leading provider of vocational
More informationLevel 2 Certificate/Diploma for Sustainable Waste Management Operative (0746)
Level 2 Certificate/Diploma for Sustainable Waste Management Operative (0746) Qualification handbook for centres www.cityandguilds.com August 2017, Version 3.1 General Route (0746-20) (600/0646/8) Waste
More informationManaging Asbestos in Premises, the Duty Holder Requirements Qualification Specification
P407 Advanced Proficiency Qualification Managing Asbestos in Premises, the Duty Holder Requirements Qualification Specification Issue 1 January 2016 Issue 1.2 January 2018 Contents Page Section 1 About
More informationLevel 3 NVQ Diplomas in Electrotechnical Technology (2357) Qualification handbook for centres
Level 3 NVQ Diplomas in Electrotechnical Technology (2357) Qualification handbook for centres www.cityandguilds.com December 2010 Version 1.2 (Sep 2011) About City & Guilds As the UK s leading vocational
More informationDiploma in Procurement and Supply
CIPS Level 4 Diploma in Procurement and Supply 4 2018 Syllabus For internal use only Introducing... Level 4 Diploma in Procurement and Supply CIPS qualifications are regulated internationally to ensure
More informationPrinciples of the Railway Industry Supplier Qualification Scheme
RISQS/001 Issue 1.2 Date: December 2015 Principles of the Railway Industry Supplier Qualification Scheme Copyright 2013 Rail Safety and Standards Board Limited. This document is subject to copyright protection.
More informationINTEGRATED LOGISTICS SOLUTIONS FOR THE OIL & GAS INDUSTRY
INTEGRATED LOGISTICS SOLUTIONS FOR THE OIL & GAS INDUSTRY Follow Bolloré Logistics on BOLLORÉ LOGISTICS, A GLOBAL LEADER IN INTERNATIONAL TRANSPORT & LOGISTICS In order to support its customers in the
More informationREPORT FROM THE COMMISSION
EUROPEAN COMMISSION Brussels, XXX [ ](2016) XXX draft REPORT FROM THE COMMISSION on availability of training for service personnel regarding the safe handling of climatefriendly technologies replacing
More informationHealth, Safety & Environment Training Middle East
Health, Safety & Environment Training 2015 Middle East About WSP Parsons Brinckerhoff WSP Parsons Brinckerhoff is one of the world s leading professional services consulting firms, with 31,000 staff, based
More informationRSPH Level 4 Certificate in Asbestos Laboratory and Project Management
RSPH Level 4 Certificate in Asbestos Laboratory and Project Management August 2016 Guided Learning Hours 18 Total Qualification Time 140 Ofqual Qualification Number 603/0275/6 Description Laboratory managers
More informationThe Leading Global Stockholder and Supplier Pipes, Fittings & Flanges
The Leading Global Stockholder and Supplier Pipes, Fittings & Flanges www.specialpipingmaterials.com Super Duplex Duplex Stainless Steel Exotics Special Piping Materials (SPM) Established in 1989 with
More informationAbstract submission information pack
Abstract submission information pack Energy Institute s international Middle East HSE Technical Forum Effective management of health, safety, environment and sustainability: SHARING INTERNATIONAL GOOD
More informationTraining & Education in Risk and Safety Management for High Hazard Industries
Training & Education in Risk and Safety Management for High Hazard Industries Helping to develop competent risk and safety management professionals via online and classroom training and postgraduate education.
More informationECOWAS-PTB Metrology Programme NMRO Training course: Legal and Industrial Metrology for Metrology Institute Management
Introduction ECOWAS-PTB Metrology Programme Confidence in measurement is necessary for fair local trade, consumer protection and international commodity trading. The National Metrology Institutes and other
More informationAsset integrity solutions. Improve integrity and reduce costs through more effective asset management. prime. Risk. Assessment.
Opportunity Asset integrity solutions Improve integrity and reduce costs through more effective asset management Risk Competency prime Training & Development Value Creation Risk Management 2 ASSET INTEGRITY
More informationIECEx 03 Service Facilities Program. John Allen Dowding & Mills
IECEx 03 Service Facilities Program John Allen IECEx Certification Scheme New Ex Equipment Repair + Services 09/10/2008 Copyright 2 IECEx Scheme Rules IECEx 02 IECEx 01 IECEx 03 New Ex Equipment Repair
More informationINTRODUCTION. Total Solutions Middle East Total Solutions M.E. total. Corporate. P r ofile. Services
Oil & Gas Directory Middle East - 2013 169 INTRODUCTION provide dedicated services and applications for buildings, structures, rigs, pipelines and construction sites, specialising in the following: Rope
More informationEquipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met
Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met Keith Mainwaring Ukrainian National Information Systems (UNIS) Tunis, 9
More informationInformation for candidates
1 Information for candidates 2 Investors in People represents 25 years of people management excellence. Our mission is simple - to raise the standard of people management for the benefit of everyone. Our
More informationManagement of Asbestos in Buildings Qualification Specification
P405 Proficiency Qualification Management of Asbestos in Buildings Issue 1 November 2018 Issue 1 January 2016 Contents Page Section 1 About BOHS 2 Section 2 P405 at a glance 3 Section 3 Background to the
More informationEquipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met
Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met Keith Mainwaring Ukrainian National Information Systems (UNIS) Trinidad
More informationGuidelines on the Competence of Personnel Undertaking Engineering Inspections
RG 0 Edition 3 December 2018 Guidelines on the Competence of Personnel Undertaking Engineering Inspections RG 0 / Edition: 3 Page 1 of 15 Contents 1. Introduction 2 2. Terms and Definitions 3 3. General
More informationGuidelines on the Competence of Personnel Undertaking Engineering Inspections
RG 0 Edition 3 November 2018 Draft for Consultation Guidelines on the Competence of Personnel Undertaking Engineering Inspections RG 0 / Edition: 3 Page 1 of 15 Contents 1. Introduction 2 2. Terms and
More informationHazardous. Scheme. the power behind your business
Hazardous Areas Scheme YOUR GUIDE TO REGISTRATION the power behind your business GUIDE TO REGISTRATION REQUIREMENTS Electrical work in potentially explosive atmospheres (hazardous areas) is not included
More informationIECEx OPERATIONAL DOCUMENT
IECEx OD 503 Edition 3.0, 2014-09 IECEx OPERATIONAL DOCUMENT IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System) IECEx Scheme for Certification
More information150 years of history. Established in 1861 to meet the needs of the shipping world. One of the oldest class societies.
Company Profile 150 years of history Established in 1861 to meet the needs of the shipping world. One of the oldest class societies. 1861 1871 initial developments: from 13 agencies and 340 ships classed
More informationSales Service Distribution
Company Profile Sales Service Distribution Our Offices DFT Dubai PO Box 38362 United Arab Emirates T.+971 4 887 8185 F.+971 4 887 8184 E. sales@dftme.com DFT Abu Dhabi PO Box 26942 United Arab Emirates
More informationRed Tractor Assurance Scheme (Assured Food Standards Ltd)
Red Tractor Assurance Scheme (Assured Food Standards Ltd) Managing and promoting assurance for the food industry Appointment of a new Chair Information for candidates www.redtractor.org.uk/home http://assurance.redtractor.org.uk/rtassurance/home.eb
More informationChallenges in the implementation of IECEx System in Brunei
Challenges in the implementation of IECEx System in Brunei Liaw Wai Khiong, CEng MIET BSc Hons (UK, Loughborough). Head of Electrical Engineering, Brunei Shell Petroleum Company (27 yrs experience) Member
More informationBuilding Information Modelling and collaborative construction. Taking the next steps
Building Information Modelling and collaborative construction Taking the next steps BIM verification and training can help support your strategic direction, prove competency, and embed the knowledge of
More informationBasic Design Principles of Local Exhaust Ventilation Systems Qualification Specification
P602 Proficiency Qualification Basic Design Principles of Local Exhaust Ventilation Systems Issue 1 January 2016 Issue 1 January 2018 Contents Section 1 About BOHS 2 Section 2 P602 at a glance 3 Section
More informationIECEx OPERATIONAL DOCUMENT
IECEx OD 314-3 Edition 2.0 2018-10 IECEx OPERATIONAL DOCUMENT IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System) IECEx Certified Service Facilities
More informationTwo Day Intensive Training Workshop on HAZARDOUS AREAS. on 5 th & 6 th August 2016 at Hotel Kohinoor Continental. Andheri, Mumbai.
Two Day Intensive Training Workshop on HAZARDOUS AREAS on 5 th & 6 th August 2016 at Hotel Kohinoor Continental Andheri, Mumbai brought to you by Abhisam Software Pvt Ltd, are pleased to announce, a two
More informationLNG Bunkering Relevance and Prospect for the MENA Region
27 th Arab Engineering Conference & Exhibition Bahrain LNG Bunkering Relevance and Prospect for the MENA Region Lennart Luten Senior Manager, Galway Group lluten@galwaygroup.com 29 March 2016 www.galwaygroup.com
More informationThe Responsible Person AKA Technical Person with Executive Functions
Peter Roberts Explosive Atmospheres Essential Guidance Series EGS 0035 Edition 1 Supplement for the CompEx Ex 14 training course. The Responsible Person AKA Technical Person with Executive Functions ExVeritas
More informationOil and Petrochemical overview. solutions for your steam and condensate system
o i l a n d p e t r o c h e m i c a l o v e r v i e w Oil and Petrochemical overview solutions for your steam and condensate system Understanding your steam and condensate system At Spirax Sarco we understand
More informationSection 14. Project Management and Verification
MAUREEN DECOMMISSIONING PROGRAMME Section 14. Project Management and Verification CONTENTS 14.1 Introduction 3 14.2 Project Management 3 14.3 Verification 5 14.4 Materials and Waste Management, and Safety,
More informationISO 37001:2016 Anti-Bribery Management System Certification. A Corporate Training and Certification Program from CRI Group
ISO 37001:2016 Anti-Bribery Management System Certification A Corporate Training and Certification Program from CRI Group As the world s governing bodies gravitate to more stringent standards and efforts
More informationCompetence as a primary tool in the safety toolkit
Competence as a primary tool in the safety toolkit Step Change Safety Share Fair Nick Hough, Technical Adviser 30 June 2010, Pittodrie stadium, Aberdeen What is IMCA? International Marine Contractors Association
More informationMECHANICAL JOINT INTEGRITY ROUTE TO COMPETENCE GUIDANCE. Working together to prevent hydrocarbon releases through safety critical competence
MECHANICAL JOINT INTEGRITY ROUTE TO COMPETENCE GUIDANCE Working together to prevent hydrocarbon releases through safety critical competence Revision 2, June 2 2013 AN OVERVIEW Mechanical joints have the
More informationOn-site & Shutdown Safety Service Safety Observer
On-site & Shutdown Safety Service Safety Observer Our Safety Observers support you in all matters regarding health and safety at work. They observe processes and suggest measures which can be implemented
More informationCE marking is regarded as a passport for products to enter and circulate freely within the 30 counties forming part of the EEA.
CE Marking Services What is CE Marking? Many products that are placed on the single market in the European Economic Area (EEA) (28 EU countries, together with Iceland, Liechtenstein and Norway) contain
More informationPreventing Disasters Through Intrinsic Safety The essentials behind an essential practice
Preventing Disasters Through The essentials behind an essential practice Intertek Deeside Lane, Chester, CH1 6DD UK hazloc@intertek.com +44 1244 882590 www.intertek.com/hazloc Contents Contents... 1 Introduction...
More informationPOTENTIALLY EXPLOSIVE ATMOSPHERES IN THE ANAEROBIC DIGESTION SECTOR
7 May 2015 POTENTIALLY EXPLOSIVE ATMOSPHERES IN THE ANAEROBIC DIGESTION SECTOR IAN BARKER, FIET, C.ENG AGENDA Introduction to B&V What is ATEX and DSEAR What are the Employers Duties What standards exist
More informationOperational Delivery Officer Apprenticeship. For Apprentices in the: Civil Service Local Authorities
G U I D E T O T H E A P P R E N T I C E S H I P S C H E M E Operational Delivery Officer Apprenticeship For Apprentices in the: Civil Service Local Authorities April 2016 Version 1.0 Apprenticeship at
More informationISO/DIS 9001:2014 Analysis and Transition Guide
Improving performance, reducing risk ISO/DIS 9001:2014 Analysis and Transition Guide An LRQA perspective Introduction The publication of the Draft International Standard (DIS) of the International Quality
More informationGuidance on the Application. of ISO / IEC Accreditation International Association for Certifying Bodies
Accreditation International Association for Certifying Bodies Guidance on the Application of ISO / IEC 17020 Guidance on the Application of ISO/IEC 17020 Page 1 of 16 Introduction This guidance document
More informationASSET MANAGEMENT SERVICES
ASSET MANAGEMENT SERVICES Petrofac Engineering & Production Services 02 ASSET MANAGEMENT SERVICES ASSET MANAGEMENT SERVICES 03 Introducing Petrofac Asset Management Services Petrofac is an international
More informationAbout TCI. we are recognized and accredited by major national and international organizations.
About TCI The Certificate International is a global leader in Testing, Inspection and Certification, delivering high quality services to help clients meet the growing challenges of quality, safety, environmental
More informationLevel 3 Diploma in Warehousing and Storage ( )
Level 3 Diploma in Warehousing and Storage (06-07) Candidate logbook 600/3766/0 www.cityandguilds.com January 202 Version.0 About City & Guilds City & Guilds is the UK s leading provider of vocational
More informationBrochure. Asset integrity solutions Improve integrity and reduce costs through more effective asset management
Brochure Asset integrity solutions Improve integrity and reduce costs through more effective asset management Asset integrity solutions Companies need a cost effective way of maintaining production capability,
More informationLevel 2 NVQ Diploma in Accessing Operations and Rigging (Construction) (6565)
QUALIFICATION LOGBOOK Level 2 NVQ Diploma in Accessing Operations and Rigging (Construction) (6565) July Version 2.1 Candidate Logbook/Work-Based Evidence Record Mandatory Units About City & Guilds As
More informationCOMPANY INTRODUCTION
Numero Uno Training and Consulting LLC COMPANY INTRODUCTION Numero Uno Training & Consulting Services (NUTC) 1 COMPANY INTRODUCTION Headquartered in Industrial City of Abu Dhabi ICAD1; Numero Uno has dedicated,
More informationQuick Guide: Field Labelling, Limited Product Certifications and Special Inspections for USA & Canada
Quick Guide: Field Labelling, Limited Product Certifications and Special Inspections for USA & Canada Intertek Cleeve Road, Leatherhead, Surrey KT22 7SB UK info.uk@intertek.com 01372 370900 www.intertek.com
More informationSwire Oilfield Services Sustainability Development Report 2013
Services Sustainability Development Report 2013 SOS-SD Rpt-001 04 June 2013 Page 1 of 8 Revision 0 TABLE OF CONTENTS 1. SCOPE... 3 2. CEO MESSAGE... 3 3. GOVERNANCE... 3 4. ECONOMIC PERFORMANCE... 4 5.
More informationSADCAS POLICY ISO/IEC 17020:2012 TRANSITION
SADCAS POLICY ISO/IEC 17020:2012 TRANSITION Prepared by: SADCAS Approved by: SADCAS CEO Approval Date:2012 09 25 Effective Date: 2012 10 01 Page 1 of 11 Table of Contents Page 1. INTRODUCTION... 3 2. TRANSITION
More informationMeet the global leader in water treatment Veolia Water Solutions & Technologies (VWS)
2010 Key figures Meet the global leader in water treatment Veolia Water Solutions & Technologies (VWS) Creating Water Solutions 1 Veolia Environnement: corporate profile Veolia Environnement offers its
More informationA EUROPEAN-WIDE STANDARD FOR SAFETY PERFOMANCE IN AN OFFSHORE DRILLING COMPANY
A EUROPEAN-WIDE STANDARD FOR SAFETY PERFOMANCE IN AN OFFSHORE DRILLING COMPANY 1. Organisations involved Noble Corporation Figure 1: Employee working on-site 1 2. Description of the case 2.1. Introduction
More informationA Guide To ISO 45001:2018. The new international standard for Occupational Health & Safety. Version 1.1 Page 1 of 7
A Guide To ISO 45001:2018 The new international standard for Occupational Health & Safety Version 1.1 Page 1 of 7 Introduction Organisations are required to provide a safe working environment in order
More informationELECTRICAL, INSTRUMENTATION & CONTROL SOLUTIONS FOR OIL & GAS INDUSTRY
Singapore Canada Qatar Italy Korea United States of America Malaysia Nigeria United Arab Emirates India www.fortunecontrols.com Yemen ELECTRICAL, INSTRUMENTATION & CONTROL SOLUTIONS FOR OIL & GAS INDUSTRY
More informationQSS 0 Products and Services without Bespoke Contracts.
QSS 0 Products and Services without Bespoke Contracts. Use: Typically Sub 50k processes without a bespoke contract. Amendment History Version Date Status V3 June 2018 Updated for 2018 deployment Contents
More informationKeeping the world s energy moving
www.bp.com/egp Keeping the world s energy moving Finding oil and gas Transporting and trading Manufacturing Marketing fuels and products BP is a global energy business, involved in every aspect of the
More informationPEFC Certification System Netherlands - Scheme Description
PCSN SCHEME DOCUMENT PCSN VIII Issue 2 10-03-2017 PEFC Certification System Netherlands - Scheme Description PEFC Netherlands Kokermolen 11 3994 DG Houten The Netherlands Tel: +31 30 693 0040 Fax: +31
More informationIEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System)
IECEx 05 Edition 1.0 2009-10 IECEx PUBLICATION IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System) IECEx Scheme for Certification of Personnel
More informationCourse Description for Basic Lockout-Tagout
Course Description for Basic Lockout-Tagout Who is this course for? This course is meant for operators in water and wastewater operations, who need Continuous Education Units towards their certification
More informationOn-site & Shutdown Safety Service Project Coordinator / Project Manager. Basic Information
On-site & Shutdown Safety Service Project Coordinator / Project Manager When it comes to turnarounds or other safety-critical tasks, our Project Coordinators / Project Managers plan the operative use of
More informationISO/IEC 17025: 2017 General Requirements for the Competence of Testing & Calibration of Laboratories
An Intensive 5 Day Training Course ISO/IEC 17025: 2017 General Requirements for the Competence of Testing & Calibration of Laboratories 02-06 Dec 2018, Dubai 01-05 Dec 2019, Dubai 09-MAY-18 This course
More informationAN INTRODUCTION TO TECHNICIAN REGISTRATION
AN INTRODUCTION TO TECHNICIAN REGISTRATION GATSBY IS A FOUNDATION SET UP BY DAVID SAINSBURY TO REALISE HIS CHARITABLE OBJECTIVES. WE FOCUS OUR SUPPORT ON A LIMITED NUMBER OF AREAS: PLANT SCIENCE RESEARCH
More informationINTLCO Training Guide. We Train Professionals TM INTLCO All Rights Reserved
INTLCO Training Guide We Train Professionals TM 2017 INTLCO All Rights Reserved Welcome Contents At INTLCO, we believe that the purpose of training is to bring about change and improvement, whether that
More informationANNUAL GENERAL MEETING 2011 REPORT FROM DIRECTOR GENERAL
ANNUAL GENERAL MEETING 2011 REPORT FROM DIRECTOR GENERAL About IFIA A federation of organisations that provide testing, inspection and certification services, internationally Established in 1982 Global
More informationCalibrations. Air-Met Scientific. with
Air-Met Scientific ISO 9001 quality accredited and NATA accredited, Air-Met Service Facilities offers a range of popular calibration services for a variety of occupational health, safety and environmental
More informationConsequence analysis OIL & GAS CONSULTANCY SERVICES
Consequence analysis OIL & GAS CONSULTANCY SERVICES London London Hong Hong Kong Kong Houston Kuala Lumpur Kuala Lumpur Abu Dhabi Abu Dhabi Dubai Dubai Shanghai Shanghai Managing the risks of Oil & Gas
More informationQCS MANAGEMENT PRIVATE LTD
Well come to QCS for Delivering Confidence! Improve Company and Product Quality Get more sales from new customers Achieve international Quality Recognition We can help you to achieve the necessary certification
More informationINSPECTION SERVICES FOR ALL YOUR INSPECTION NEEDS
INSPECTION SERVICES FOR ALL YOUR INSPECTION NEEDS COMPETENCE RELIABILITY CAN DO YOUR PARTNER FOR INSPECTION SERVICES Headquartered in Thailand our journey began 25 years ago in Norway from where we have
More information66 items 70% of circulated products
THE TREATY ON THE EURASIAN ECONOMIC UNION of May 29, 2014 1 Establishment and application of mandatory requirements to products in technical regulations Establishment of a single procedure of conformity
More informationLevel 3 NVQ Diplomas in Electrotechnical Technology (2357)
Level 3 NVQ Diplomas in Electrotechnical Technology (2357) Qualification handbook for centres www.cityandguilds.com Version 5.5 September 2017 Level 3 Diplomas in Electrotechnical Technology (2357) 3 About
More informationQUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 2 Award in Employee Rights and Responsibilities in the Logistics Industry (3296-02) June 2011 Version 1.0 Qualification at a glance Subject area Employee Rights and Responsibilities
More informationConsidering industry costs and benefits for Safety Management, can we do better?
Considering industry costs and benefits for Safety Management, can we do better? www.epsc.org Richard Gowland Technical Director EPSC EPSC EPSC is an Industry funded association of approximately 40 chemical
More informationGuilds. City. Level 3 Certificate in Facilities Management Practice (7724) Learner logbook
Level 3 Certificate in Facilities Management Practice (7724) Learner logbook City Guilds 600/0605/5 www. cityan dguil ds. com October 2011 Version 1.0 About City & Guilds As the UK s leading vocational
More informationLevel 1 Award/Certificate in Warehousing and Storage ( )
Level 1 Award/Certificate in Warehousing and Storage (1016-01) Candidate logbook www.cityandguilds.com March 2012 Version 1.0 Level 1 Award 1016-01 QAN 501/1690/3 Level 1 Certificate 1016-01 QAN 501/1691/5
More informationInformation leaflet on coming up changes in the European Pressure Equipment Directive (PED) 1 Introduction to new PED 2014/68/EU
Information leaflet on coming up changes in the European Pressure Equipment Directive (PED) 1 Introduction to new PED 2014/68/EU The Pressure Equipment Directive (PED 97/23/EC) has been in place since
More information5.1 Amadeus: a people company
05 91 Amadeus Annual Report 2011 5.1 Amadeus: a people company Key figures An international company committed to its employees > Workforce of over 10,000 people > 41% women > A diverse team from 123 countries
More informationArgus Ethylene Annual 2017
Argus Ethylene Annual 2017 Market Reporting Petrochemicals illuminating the markets Consulting Events Argus Ethylene Annual 2017 Summary Progress to the next peak of the economic cycle, now expected by
More informationPlan. Build. Grow. Corporate Profile
Plan. Build. Grow. Corporate Profile Our mission: Our vision: Every project in the world running on WRENCH SmartProject technology. To be the technology partner of choice of organizations involved in construction
More informationAddressing Perceived Barriers to the Acceptance of Third Party Certification
Addressing Perceived Barriers to the Acceptance of Third Party Certification Addressing Perceived Barriers to Acceptance of Third Party Certification This paper will address the perceived barriers in relation
More informationLevel 3 Certificate, Subsidiary Diploma, 90-Credit Diploma, Diploma, Extended Diploma in Agriculture ( )
Level 3 Certificate, Subsidiary Diploma, 90-Credit Diploma, Diploma, Extended Diploma in Agriculture (0073-03) Qualification handbook for centres 500/8488/4 500/8388/0 600/6048/7 500/8487/2 500/8490/2
More informationSBM Offshore OIL & GAS. sdv.com
SBM Offshore OIL & GAS sdv.com SDV, A CUSTOMIZED SERVICE AND AN ASSURED PERFORMANCE The strength of our network: Our presence in 99 countries ensures proximity to our customers and guarantees complete
More informationAssociate Progression. Candidate Guide. August 2016
Associate Progression Candidate Guide August 2016 Published by: RICS, Parliament Square, London SW1P 3AD. All rights in this publication, including full copyright or publishing right, content and design,
More information