Safety, Health & Environment Contractor Induction
|
|
|
- Bruce Robinson
- 6 years ago
- Views:
Transcription
1 Safety, Health & Environment Contractor Induction Merchandisers & Demonstrators start
2 Disclaimer The views presented in this publication are solely those of Woolworths Limited. Not every procedure or condition has been covered in this module. There may be additional laws, regulations, codes of practices and standards which are not captured in this module, but which must also be complied with. Woolworths Limited accepts no duty of care or liability to you or any third party for any loss suffered in connection with the use of this module. Woolworths Limited may amend, modify or change any policy, requirement or rule set out in this module at any time. April 2013 Copyright by Woolworths Limited, 1 Woolworths Way, Bella Vista, NSW 2153
3 Welcome to Woolworths Limited Woolworths Limited is committed to putting safety, health and wellbeing at the centre of what we do. Woolworths has identified and documented this induction with the view of providing consistent safety and health information to contractors, including merchandisers and demonstrators, consultants, entertainers, trainers, assessors and other non toolbox contractors. Prior to commencing work on Woolworths Limited sites, it is a requirement that this online induction be completed and you comply with Health & Safety Legislation, Codes of Practice, industry standards. Failure to adhere to the requirements detailed in this Induction may result in you being removed from site and escalation to your company with the prospect of not being able to undertake further work on a Woolworths Limited site. On successful completion of this induction, you will be given the option to print an induction card or receive by an electronic version of the card. This card must be presented when attending a Woolworths Limited Sites.
4 Arrival at Site/Store Upon arrival at site and prior to commencement of work, Contractors are required to sign the Visitor/Contractor Sign In Book at Woolworths Limited sites and present proof of successfully completing the General Induction. You will then be issued with a Visitor sticker/badge which is to be worn at all times and you will also receive a site specific induction. We ask you to take careful note of the emergency evacuation arrangements at this time. Visitor stickers must be removed when signing out of the site upon completion of work for that day. Example of a Supermarket Visitors Sticker
5 On Site Obligations As a contractor you have a responsibility to comply with Woolworths Safety Requirements: Please assist us to provide a safe workplace by: Where possible clean up any spills otherwise report immediately to a staff member. Reporting any hazards you may identify to store/duty Manager. Reporting any incidents or injuries that may occur to Store/Duty Manager. Carrying out your tasks in a manner which is safe and will prevent injury. Keeping work areas clean and clear of rubbish. Concentrating on the task at hand, and not being distracted. Practicing safe systems of work. Using correct lifting techniques. Not climbing on any fixtures, furniture and equipment. Do not use any equipment unless authorised by the Site/Duty Manager.
6 Manual Handling and PPE Manual handling is not just about lifting boxes it is about how we walk, sit and carry out our everyday tasks. THINK BEFORE YOU ACT IF YOU ARE NOT SURE OR YOU NEED HELP ASK. NEVER PUT YOUR PERSONAL SAFETY AT RISK. Appropriate personal protective equipment is to be used at all times. The following items may be required based on the tasks being completed: High visible clothing Eye protection Safety shoes Apron/Gloves
7 Danger or Out of Service Tags If a danger tag is attached to equipment you must not use it. Unauthorised removal of a danger tag will lead you being removed from site and escalation to your company. Any Electrical equipment brought into site must have a current Test Tag. The test tag must show: The day by which the appliance must be re-inspected and re-tested. Tester s name or number.
8 3. Completed Thank you. You have now completed the Merchandisers & Demonstrators Woolworths Safety, Health and Environment Contractor Induction. Please proceed to the competency assessment by clicking TAKE SUBJECT EXAM below.
SAFE WORK METHOD STATEMENT (SWMS)
ABN: 12 345 678 910 ACN: 123 456 789 Address: Your Company Address PH: Your Company Phone E: Your Company Email Web: Your Company Website PROJECT DETAILS: Project: SAFE WORK METHOD STATEMENT (SWMS) Area:
Section 1: Management Involvement. 1.1 Corperate Health and Safety Policy. Nivek Oilfield Hauling Ltd.
1.1 Corperate Health and Safety Policy Nivek Oilfield Hauling Ltd. ( Nivek ) is committed to employee safety and the protection of our environment. Our priority is the prevention of accidents and/or injury
HFM Asset Management Contractor Induction Queens Riverside Apartments
HFM Asset Management Contractor Induction Queens Riverside Apartments Contents Purpose About HFM Asset Management HFM Asset Management s Responsibilities Contractors Responsibilities Commencing Work Working
WHS Manual Insert Business Name & Logo
WHS Manual Insert Business Name & Logo Version5 Work Health & Safety Manual INDEX OVERVIEW 4 1. WORK HEALTH AND SAFETY POLICY 5 2. PLANNING, REVIEW AND EVALUATION 9 3. HAZARD IDENTIFICATIO, ASSESSMENT
Contractor Site Safety Procedure
Contractor Site Safety Procedure Related Policy Work Health and Safety Policy Responsible Officer Executive Director, Infrastructure Services and Development Approved by Executive Director, Infrastructure
Click on the relevant state and open the OHS authority website.
Copyright 2011 - OnGuard Safety Training Pty Ltd 1 of 7 Introduction Overview OHS Acts National Codes Codes of Practice Duty of Care Overview Occupational health and safety (OHS) legislation varies in
WORK HEALTH AND SAFETY AUDIT STANDARD
WORK HEALTH AND SAFETY AUDIT STANDARD FORESTRY INDUSTRY South Australia, Victoria and Tasmania Safety Standards 2017 2017 Content I. Introduction... 2 II. Audit Criteria and Indicators... 3 1 PLANNING...
Safety Statement Including Risk Assessment
Safety Statement Including Risk Assessment Health and Safety Authority 6th March 2012 Health & Safety Policy I / We of am / are committed to working in accordance with the provisions of the Safety, Health
Policy Work Health and Safety (WHS) RCPA Introduction WHS legislation
Policy Subject: Work Health and Safety (WHS) Approval Date: July 2011, December 2014 Review Date: July 2018 Review By: Board of Directors Number: 1/2011 The Royal College of Pathologists of Australasia
This document sets out the rules applicable to all contract companies and their personnel when working on a CF Fertilisers UK Limited (CF) site.
CONTRACTOR EHS REQUIREMENTS FOR ON-SITE WORK Issued by:: EHS Page No: Issue No: Issue Date: Authorised By: Review date: 1 of 8 3 July 2016 N Cook July 2020 1. INTRODUCTION This document sets out the rules
WHS Management Plans
WHS Management Plans Disclaimer This Guide provides general information about the obligations of persons conducting a business or undertaking and/or persons in control of premises and workers under the
Bowmer. & Kirkland. Kirkland. & Accommodation. Health & Safety Policy.
Bowmer Kirkland & Kirkland & Accommodation Health & Safety Policy December 2013 www.bandk.co.uk Index Policy Statement Page 3 Interaction of Health and Safety Responsibilities Page 5 Organisation Page
1. Overview. 2. Benefits. 3. Roles and Responsibilities. 3.1 Student
1 1. Overview Inaburra s Work Experience Program is one week in duration and is geared towards providing Year 10 Students with a taste of what the workforce and the recruitment process comprise. It is
Before you begin. Topic 1: Provide WHS information to the work team 1. Learning checkpoint 1: Provide WHS information to the work team 15
Contents Before you begin vii Topic 1: Provide WHS information to the work team 1 1A Explain WHS legislation and codes of practice to the work team 2 1B Provide accessible organisational WHS information
Woolworths Meat Company Driver Induction
Woolworths Meat Company Driver Induction Introduction Introduction Welcome! Today, you re going to spend some time looking at the types of things you ll need to know to fulfil your role as a driver for
NZ Health & Safety at Work
NZ Health & Safety at Work A partnership publication Get ready & be ready for April 4th 2016. The revised Health and Safety at Work Act comes into effect on 4 April 2016. It s quite a change for a lot
Health and Safety Management Standards
Management Standards Curtin University Sept 2011 PAGE LEFT INTENTIONALLY BLANK Management Standards Page 2 of 15 CONTENTS 1. Introduction... 4 1.1 Hierarchy of Documents... 4 2. Management System Model...
Conforming to General Health, Safety and Welfare in the Workplace
Unit Update A/503/1170: CONFORMING TO GENERAL HEALTH, SAFETY AND WELFARE IN THE WORKPLACE U s e f r o m 2 0 1 2 J a n u a r y This version of this unit replaces all previously published versions with effect
SITE SAFETY RULES - SILVERSTONE CLASSIC 2018
SITE SAFETY RULES - SILVERSTONE CLASSIC 2018 The following is an outline of the Safe Working Requirements for all Companies, staff and any other persons for this event. Please note that the terms Company
Work Health and Safety Toolkit for Congregations
Work Health and Safety Toolkit for Congregations Developing your WHS Management System Title Work Health and Safety Toolkit for Congregations Creation Date Dec 2014 Version 1 Last Revised Dec 2014 Approved
COSVR641 Conform to general workplace health, safety and welfare
Conform to general workplace health, safety and welfare Overview This standard, in the context of your occupation and work environment, is about awareness of relevant current statutory requirements and
HEALTH & SAFETY POLICY Of JMC Mechanical Electrical & Air Conditioning Ltd
HEALTH & SAFETY POLICY Of JMC Mechanical Electrical & Air Conditioning Ltd Company Trading Address 242 Fort Austin Avenue Crownhill Plymouth PL6 5NZ Tel: 01752 657227 Fax: 01752 657227 Email: enquiries@jmc-sw.com
Field Safety Officer
Position Vacant Field Safety Officer (Reference Number: 07/18) Shellharbour City offers coastal, urban and rural lifestyles in one of the fastest growing regions of NSW. Located just 1 1/2 hours south
RISK RATING SAFE WORK METHOD STATEMENT 1 HIGH 2 MEDIUM 3LOW. I approve the use of this Safe Work Method Statement: NAME: POSITION: Department Manager
RISK RATING 1 HIGH 2 MEDIUM 3LOW SAFE WORK METHOD STATEMENT Title: : Spraying Chemicals Operation Ref No: 1 I approve the use of this Safe Work Method Statement: NAME: POSITION: Department Manager SIGNATURE:
A-one+ Supply Chain Standards
A-one+ Supply Chain Standards A-one+ Page 1 of 12 Introduction We at A-one+ are committed to achieving an incident and accident free environment through our health and safety strategy. We demand Supply
HEALTH & SAFETY POLICY
Deeds not words - Be the best you can be HEALTH & SAFETY POLICY Updated: Spring 2018 Approved by Governors Resource Management Committee: 13 February 2018 NEXT REVIEW 2020 WHITLEY ACADEMY HEALTH AND SAFETY
ESS Health & Safety Arrangements Management of Contractors (Including Consultants)
ESS Health & Safety Arrangements Management of Contractors (Including Consultants) Distribution: This document must be brought to the attention of all ESS Managers and Employees responsible for engaging
SQF Code Module 2 Food Safety Quality Management System Training Guide. IFSQN.com
SQF Code Module 2 Food Safety Quality Management System Training Guide IFSQN.com SQF Global Standard for Food Safety and Quality The SQF Code is divided into three certification levels. Suppliers receive
PREMIUM DISCOUNT SCHEME AUDIT TOOL
PREMIUM DISCOUNT SCHEME AUDIT TOOL 2003 WorkCover. Watching out for you. Disclaimer This publication contains information regarding occupational health, safety, injury management or workers compensation.
Health, Safety and Welfare Policy
Health, Safety and Welfare Policy Contents Introduction Our objectives Health and Safety Policy Statement Health and safety organogram Responsibilities for health, safety and welfare 2 3 4 5 6 13 Arrangements
CATEGORY Policy SUBJECT Work Health & Safety ISSUED BY Human Resources APPROVAL DATE 05/08/2015
POLICY NUMBER P15/2 VERSION 1.0 CATEGORY Policy SUBJECT Work Health & Safety ISSUED BY Human Resources APPROVAL DATE 05/08/2015 AUTHORISED BY Trust ISSUED DATE 10/08/2015 DISTRIBUTION External REVIEW DATE
Contractor Management and Purchasing
company workers at risk. Contractors play a significant role in safety and health management at facilities whether there are contract miners or contractors performing project work. They often face very
National self-insurer OHS management system audit tool. Version 3
National self-insurer OHS management system audit tool Version 3 Release Date: 4 August 2014 Next Review Date: 2016 Approval Status: Prepared by: Approved by Heads of Workers Compensation Authorities WorkCover
Container Transport Operator Access Terms & Conditions
Last updated 26 September 2017 Container Transport Operator Access Terms & Conditions These Terms & Conditions govern the entry into and use of ACFS Port Logistics, ACFS e-depot ( e-depot ) by Container
East Riding of Yorkshire Council Corporate Health and Safety Policy
East Riding of Yorkshire Council Corporate Health and Safety Policy Lead Directorate and Service: Corporate Resources - Human Resources, Safety Services Effective Date: June 2016 Date Due for Review: June
SAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT Company Name: THE GROUP PTY LTD This SWMS has been developed and: (T/A ARTHUR S CONCRETE CUTTING) Approved by: ATHANASIOS Address: 18 PANANIA AVE PANANIA NSW 2213 Position: TEL:
V.2. REFERENCE: G:\Public\OCCUPATIONAL HEALTH & SAFETY\3. INDUCTION\General Site Induction REVIEW DATE: 5/6/2013
REFERENCE: G:\Public\OCCUPATIONAL HEALTH & SAFETY\3. INDUCTION\General Site Induction REVIEW DATE: 5/6/2013 V.2 WELCOME TO N.F. McDONNELL & SONS Before working on our site it is a requirement that all
Our health and safety policy objective is that no person will come to harm while working, studying or visiting UNSW.
Introduction This plan sets health and safety objectives for UNSW for -2018 based on UNSW s Policy and in support of the UNSW 2025 Strategy and associated Faculty and Division Operational Plans. This plan
Community & Client Services. Health & Regulatory Services
Position Title: Team Leader Environmental Health Level: Salaried 6 Department: Program: Position Numbers: Community & Client Services Health & Regulatory Services HRS011 Position Objective Contribute to
PIN s genericone time use access to the registration system online. PIN s are not tied to
1 2 PIN s genericone time use access to the registration system online. PIN s are not tied to a user in any way. It is given to them so that they can gain access to register as a user into the SCOT course.
PRE-INSTALLATION MEETING RECORD
Meeting Date: Meeting Location: Description of Work To Be Discussed: Attendees (in most cases must include the trade contractor s foreman who will actually be out in the field doing the work): NAME POSITION
In preparation for Retail Expo 2018 we would like to make you aware of a UK law that is compulsory for all events in the UK.
CDM Regulations at Retail Expo 2018 In preparation for Retail Expo 2018 we would like to make you aware of a UK law that is compulsory for all events in the UK. In April 2015 the Construction (Design and
LEVEL 3 HEALTH & SAFETY IN THE WORKPLACE
LEVEL 3 HEALTH & SAFETY IN THE WORKPLACE COURSE CONTENT OVERVIEW 0333 006 7000 www.highspeedtraining.co.uk This Level 3 Health and Safety in the Workplace course is designed to help employers, managers
WI Revision 14 Safety
ACCESS CONTROL MAIN GATE WI29.523 Revision 14 Safety 1.0 PURPOSE To allow only authorised vehicles, persons or materials to enter or exit the Liberty Onesteel Whyalla Main Security Gate. 2.0 SCOPE These
COR TM Audit Safety Committee Questions
COR TM Audit Safety Committee Questions Brian Westbrook Instructor Workshop #000246 February 2013 References Construction Safety Association Manitoba (CSAM) website COR TM Safety Audit Procedures Safety
Adelaide Airport Limited
Induction Pack for Contractors Site Rules and Conditions for Contractors Revision: 7 November 2015 Site Rules and Conditions-Adelaide:Legal 42723757_1 1. GENERAL 1 2. BUILDING CONSENT AND APPROVAL 1 3.
NZQA unit standard version 5 Page 1 of 5. Attach, lift, move, and place loads using mobile plant
Page 1 of 5 Title Attach, lift, move, and place loads using mobile plant Level 3 Credits 10 Purpose People credited with this unit standard are able, using mobile plant, to: prepare for a lift; select
Level 2 NVQ Certificate in Erection of Precast Concrete (Construction)
Level 2 NVQ Certificate in Erection of Precast Concrete (Construction) Qualification Specification ProQual 2016 Contents Introduction 3 Qualification profile 3 Qualification Structure 4 Pathway 1 Flooring
The anglo american Safety way. Safety Management System Standards
The anglo american Safety way Safety Management System Standards 2 The Anglo American Safety Way CONTENTS Introduction 04 Anglo American Safety Framework 05 Safety in anglo american 06 Monitoring and review
Procedure: Safety Management System Procedure - My Safety
Procedure: Safety Management System Procedure - My Safety 1. Purpose Ensure a framework for managing OHS risks is implemented integrating the organisation's planning, management, reporting processes, communication,
Education Infrastructure Service. Asbestos Management Process
Education Infrastructure Service Asbestos Management Process Version 9 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by
Mobile Elevated Working Platform Instructor / Examiner Training & Certification
Health & Safety Certification & Services Ltd Central Administration Office - 100 Princes Street, Kettering, Northamptonshire, NN16 8RR Tel: 01536 414966 Fax: 01536 416933 email: info@hscsltd.co.uk WEB
SAMPLE. MEM05052A Apply safe welding practices. MEM05 Metal and Engineering Training Package. Learner guide Version 1
MEM05 Metal and Engineering Training Package MEM05052A Apply safe welding practices Learner guide Version 1 Training and Education Support Industry Skills Unit Meadowbank Product Code: 5749 Acknowledgments
GUIDELINES FOR CONTRACTOR ENVIRONMENTAL MANAGEMENT PLANS CS-ENV-08
CS ENERGY PROCEDURE FOR GUIDELINES FOR CONTRACTOR ENVIRONMENTAL MANAGEMENT PLANS CS-ENV-08 Responsible Officer: Manager Environment Approved: Executive General Manager Asset Strategy DOCUMENT HISTORY Date
CHAS Assessment Standards
CHAS Assessment Standards Section 1 - All Prosecutions or Enforcement Notices The Supplier has provided details of any enforcement notices or prosecutions served on them in the last three years by the
Safe visits to Customer Site for occasional visitors from Industrial Gas Companies
Training Package TP 20/16 Safe visits to Customer Site for occasional visitors from Industrial Gas Companies Safe visits to Customer Sites for occasional visitors from Industrial Gas Companies Disclaimer
ENVIRONMENT, HEALTH & SAFETY POLICY Up date
ENVIRONMENT, HEALTH & SAFETY POLICY Up date 2017-07-03 1.0 PURPOSE Exo-s is vitally interested in the environment, health and safety of its employees. Protection of employees from injury or occupational
CONTRACTOR WHS HAZARD STANDARD TRAFFIC MANAGEMENT EXTERNAL USE ONLY
CONTRACTOR WHS HAZARD STANDARD TRAFFIC MANAGEMENT EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition
Work Health and Safety
Policy Health and Safety Endorsed: 23 August 2016 Brief description The GPC Health and Safety Policy and its supporting standards and procedures provide a framework to protect the health and safety of
Designer and CDM Co-ordinator Guidance
Designer and CDM Co-ordinator Guidance Fewer than five employees Health and Safety 1 CONTENTS INTRODUCTION...5 Further reading / additional resources...5 Note to suppliers...6 QUESTION 1: POLICY AND ORGANISATION...8
Designer and CDM Co-ordinator Guidance
Designer and CDM Co-ordinator Guidance Five or more employees 1 CONTENTS INTRODUCTION...4 Further reading / additional resources...4 QUESTION 1: POLICY AND ORGANISATION...5 Guidance...5 What you need to
Container Transport Operator Access Terms & Conditions
Updated 15 August 2017 Container Transport Operator Access Terms & Conditions Address: Telephone: 465-467 Somerville Road Brooklyn Vic 3012 +61 3 9314 5589 After Hours: 0417 261 544 Fax: 9314 1412 Email:
Occupational Health and Safety. Improvement Standard
Premier s Department New South Wales Occupational Health and Safety Improvement Standard A tool for measuring OHS performance within NSW Government Agencies OHS IMPROVEMENT STANDARD NSW GOVERNMENT - REVIEW
Health and Safety Manual
Health and Safety Manual CS-OHS-M-01 Version 2 Effective date: 30 November 2012 Next review date: 01 November 2014 Health and Safety Manual CS-OHS-M-01 FOREWORD The foundation of CS Energy s success as
G4S Secure Solutions (UK)
Document classification ISSUED Page 1 of 22 Page Blank Document classification ISSUED Page 2 of 22 Contents Page Blank... 2 1. Purpose... 5 2. Scope... 5 3. Organisational Arrangements Responsibilities...
Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services Construction Operations (Construction)
Civil Engineering Services Construction Operations (Construction) Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 4 Qualification structure 5 Centre requirements
HEALTH AND SAFETY STRATEGY
HEALTH AND SAFETY STRATEGY 2016-2019 Version: 1.0 Ratified by: Integrated Governance Committee Date ratified: 30 September 2015 Title of originator/author: Title of responsible committee/group: Head of
Contractor Management & Bridging Documents DrillSafe Brisbane 2013
Contractor Management & Bridging Documents DrillSafe Brisbane 2013 Petroleum and Gas Inspectorate Department of Natural Resources and Mines David Sharp A/Deputy Chief Inspector Contractor Management Contractor
GUIDE FOR APPLICANTS
GUIDE FOR APPLICANTS This guide has been prepared to assist you in applying for a position with Port of Newcastle. Prior to completing your application, please read the following information to gain an
Risk and Safety Officer
Department: Office of the General Manager Section: Organisational Development Location: City Offices Classification: Grade 4 Level 1 5 Position Overview The position of will be responsible for developing
Health & Safety Xpert User Guide
Health & Safety Xpert User Guide Software by Steven Mulgrew Written by Joanna Mulgrew, Olivia Wild, Dave Price, Ed Britten & John Rees House Builder XL Limited House Builder XL Limited Contents Contents
OH&S MANAGEMENT SYSTEM CHECKLIST - AS 4801:2001 (STATUS A = Acceptable; N = Not Acceptable; N/A = Not Applicable)
OH&S MANAGEMENT SYSTEM CHECKLIST - AS 4801:2001 (STATUS A = Acceptable; N = Not Acceptable; N/A = Not Applicable) 4.1 General Requirements 4.2 OHS policy Has the organisation an established and maintained
National Harmonisation of WHS Legislation
National Harmonisation of WHS Legislation Considerations for Schools Update No. 2 Roles and Structure July, 2011 Michael Shorter, CAHRI, CPMSIA, RSP (Aust) Grad. Dip. Occ. Health Prac. This update contains
ANGLE GRINDER USE PROCEDURE
Date Adopted: 7 March 2013 Reviewed: 7 March 2013 Due for Review: 7 March 2015 Business Unit: HSE Current Policy Date: 7 March 2013 ANGLE GRINDER USE PROCEDURE 1.0 PURPOSE 2.0 SCOPE 3.0 REFERENCES TasPorts
Exhibitor Guidelines for Booth Display Rules and Regulations
Exhibitor Guidelines for Booth Display Rules and Regulations NACE strives to provide each exhibitor with a reasonable sight line from the aisle. To help accomplish this, the following Guidelines for Booth
Safety Program. For Packaging, Manufacturing, Distribution
Safety Program For Packaging, Manufacturing, Distribution SAFETY PROGRAM Clarification This document is provided only as a guide to assist employers and employees in developing a Safety Program designed
Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services Construction Operations (Construction)
Civil Engineering Services Construction Operations (Construction) Qualification Specification ProQual 2014 Contents Page Introduction 3 The Qualifications and Credit Framework (QCF) 3 Qualification profile
QUALIFICATION SPECIFICATION
QUALIFICATION SPECIFICATION Level 3 Diploma in Engineering Construction Maintenance (RQF) Contains the following pathways: - Electrical - Instrumentation and control - Mechanical QS-Engineering Construction
OPTUS SUPPLIER WORK HEALTH & SAFETY POLICY
OPTUS SUPPLIER WORK HEALTH & SAFETY POLICY 1. Introduction 1.1 SCOPE & PURPOSE This policy (which includes this document and the work health and safety standards, policies, procedures and safety control
WORK PLACEMENT AGREEMENT
WORK PLACEMENT AGREEMENT Thank you for choosing a Ravensbourne student for work placement. We hope the placement experience will be positive and that you will want to work with us on a continuing basis.
Electrical Transmission & Distribution Partnership. Continuing Education Training. Pre Job Briefings
Electrical Transmission & Distribution Partnership Continuing Education Training Pre Job Briefings Presenter Guide 1st Quarter 2017 This page intentionally left blank 2 Introduction This Pre-Job Briefing
Container Transport Operator Access Terms & Conditions
ANL CONTAINER PARK Pty Ltd 11-21 Pinnacle Road Altona North VIC 3025 LAST UPDATED 28 SEPTEMBER 2016 Container Transport Operator Access Terms & Conditions 1) Overview... 2 2) Site safety requirements...
5.43 NOSA CMB
FRESH STANDARD CONTRACTOR OCUPATIONAL HEALTH & SAFETY Approval: 5.43 NOSA CMB 150 5.43 New OHSAS 18001:2007 4.3.2; 4.4.2; 4.4.6 Supersede Std. 5.43 rev 01 Revision No. 02 Effective Date 18 August 2014
Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services Highways Maintenance (Construction)
Civil Engineering Services Highways Maintenance (Construction) Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements
Health and safety objectives.
2016-17 Health and safety objectives. Martin Baggs message. My commitment to the health, safety and wellbeing of our people is unwavering. This commitment is reflected across all teams within the business,
Field/Mobile Working Policy
Field/Mobile Working Policy Management Guidance This document sets out UKRI Field/Mobile Working Policy, which is contractual. It also provides additional guidance for managers, employees and HR in the
See revision section. Resources, Roles, Responsibility, Accountability, and Authority. Section in OHSAS 18001:2007
1. PURPOSE The purpose of this document is to identify occupational health and safety roles and responsibilities at each function and level within the City of Dallas in accordance with the requirements
SECTION 1 - INTRODUCTION 2 PURPOSE 2 SCOPE 2 DEFINITIONS 2 LEGISLATIVE CONTEXT 4 RESPONSIBILITIES 4
OH&S Procedure Name: Manual Handling Procedure Approved by: Director Human Resources Last reviewed: December 2013 SECTION 1 - INTRODUCTION 2 PURPOSE 2 SCOPE 2 DEFINITIONS 2 LEGISLATIVE CONTEXT 4 RESPONSIBILITIES
WORK IN THE VICINITY OF POWER POLES AND OVERHEAD LINES
CONTRACTOR WHS HAZARD STANDARD WORK IN THE VICINITY OF POWER POLES AND OVERHEAD LINES EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES
External Supplier Control Obligations
External Supplier Control Obligations Health and Safety Barclays recognises that we have clear Health and Safety (H&S) responsibilities towards everyone impacted by our business operations including,
The Horse Rangers Association Health & Safety Policy
The Horse Rangers Association Health & Safety Policy General Statement of Intent The company believes that excellence in the management of health and safety is an essential element within its overall business
UNISON Health & Safety Guidelines. Responsibility for health and safety in the workplace
Responsibility for health and safety in the workplace Your employer has two main responsibilities when it comes to preventing accidents in the work place: they should take measures to protect anyone in
Integrated Safety, Quality and Environmental Management System WHS AS/NZS 4801 QUALITY AS/NZS ISO 9001 ENVIRONMENT AS/NZS ISO 14001
Integrated Safety, Quality and Environmental Management System WHS AS/NZS 4801 QUALITY AS/NZS ISO 9001 ENVIRONMENT AS/NZS ISO 14001 Endorsement The Anker Innovations is developed to ensure delivery and
WORK PLACEMENT INFORMATION BOOKLET
WORK PLACEMENT INFORMATION BOOKLET CHC33015 CERTIFICATE III in INDIVIDUAL SUPPORT CHC43015 CERTIFICATE IV in AGEING SUPPORT Work experience Contents Introduction... 3 Aim... 3 Work Placement Requirement...
CARRIER ACCESS ARRANGEMENTS QUBE PORT BOTANY EMPTY CONTAINER PARK LAST UPDATED 7 APRIL Overview
CARRIER ACCESS ARRANGEMENTS QUBE PORT BOTANY EMPTY CONTAINER PARK LAST UPDATED 7 APRIL 2017 1. Overview QUBE LOGISTICS (NSW) PTY LTD ABN 99 123 022 588 Gate B117, Ramp C Off Penrhyn Road Port Botany NSW
Health & Safety Manual. September 2013
Health & Safety Manual September 2013 Health and Safety Policy Statement The Central Otago District Council is committed to a process of continuous improvement in order to achieve excellence in the management
Joint Operations CHESM Interim Performance Review Form. Interim Performance Review Related Information
Joint Operations CHESM Interim Performance Review Form Interim Performance Review Related Information Contractor Company Name: Contract Number: Contract Title: Location: Number of employees supporting
Level 2 NVQ Diploma in Roadbuilding and Maintenance (Construction) Pathway 29: Plant Road Sweeping. Qualification Specification
Level 2 NVQ Diploma in Roadbuilding and Maintenance (Construction) Pathway 29: Plant Road Sweeping Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Entry requirements
HAS/042/001 Code of Practice for Work on Street Lighting and Street Furniture including Installation, Repairs and Maintenance
Version:- 2.0 Date of Issue:- March 2017 Page 1 of 13 HAS/042/001 Code of Practice for Work on Street Lighting and Street Furniture including Installation, Repairs and Maintenance 1. Purpose The purpose
Level 2 NVQ in Heating and Ventilating Ductwork Installation (6088)
Level 2 NVQ in Heating and Ventilating Ductwork Installation (6088) National occupational standards and Assessment requirements www.city-and-guilds.co.uk Version 1 August 2003 Publications and enquiries