NZQA registered unit standard version 4 Page 1 of 5
|
|
- Spencer Black
- 5 years ago
- Views:
Transcription
1 Page 1 of 5 Title Demonstrate the requirements for holding access permits for work on high voltage electrical lines, cables, and equipment Level 3 Credits 4 Purpose People credited with this unit standard are able to: demonstrate knowledge of the requirements to hold an access permit for work on high voltage lines, cables and equipment; describe the requirements to request and return an access permit for work on high voltage lines, cables and equipment; and demonstrate recipient requirements to accept and return a permit for work on high voltage lines, cables and equipment in accordance with industry requirements. Classification Electricity Supply > Electricity Supply - Core Skills Available grade Achieved Entry information Critical health and safety prerequisites Unit 17026, Demonstrate knowledge of safe entry into restricted areas in an electricity supply environment, or demonstrate equivalent knowledge and skills. Explanatory notes 1 This unit standard is intended for, but not restricted to off job assessment. The range statements within the unit standard can be applied according to enterprise specific equipment, procedures and processes. 2 Safety of personnel and plant must be a priority throughout the assessment. If the safety requirements are not met the assessment must stop. 3 Performance and work practices in relation to the outcomes and evidence requirements must comply with all current legislation, especially the Electricity Act 1992 and any subsequent amendments, and any regulations, codes of practice recognised under that statute, Health and Safety in Employment Act 1992, the Resource Management Act 1991, and their subsequent amendments, electricity supply industry codes of practice and documented enterprise procedures. These include, Safety Manual Electricity Industry (SM-EI) (2004) Wellington: Electricity Engineers Association. A full list of current legislation and industry codes is available from: PO Box 1245
2 Page 2 of 5 HAMILTON. 4 The phrase in accordance with industry requirements is implicit in all outcomes and evidence requirements in this unit standard. 5 Definitions Industry requirements include all asset owner requirements; manufacturers specifications; and enterprise requirements which cover the documented workplace policies, procedures, specifications, business, and quality management requirements relevant to the workplace in which assessment is carried out. Asset owner refers to the owner of an electricity supply network that takes its point of supply from Transpower NZ, and delivers electricity to industrial, commercial and residential customers. Asset owner standards are the approved documented work site methods for carrying out work on an electrical supply network to the standard required by the asset owner. 6 This unit standard is intended for use in the assessment of Distribution and Transmission Line Mechanics, Cable Jointers and Substation maintainers and all terminology should be related to that sector of the industry. 7 The scope of this unit standard includes but is not limited to: restricted high voltage areas (exceeding 1000 volts) located within the electrical industry. 8 Assessments for this unit standard may be conducted in a simulated electricity supply workplace environment. Outcomes and evidence requirements Outcome 1 Demonstrate knowledge of the requirements to hold an access permit for work on high voltage lines. 1.1 Industry wide access permit types are described in terms of access and test permits. 1.2 The permit recipient s responsibilities are described in terms of personnel safety on high voltage lines. responsible for safe work practices of employees, other workers, visitors and the public; supervisor responsibilities; attending job location; taking appropriate course of action if absent from job location; appropriate personal protective equipment; permit modifications. 1.3 The permit recipient s responsibilities are described in relation to work party membership. membership competent or under supervision, fit state for work.
3 Page 3 of The permit recipient s responsibilities are described in terms of the work party member s compliance with permits. includes but is not limited to information on access permits, work party members signatures, work party members leaving and returning to job. 1.5 Basic access permit requirements are described in terms of issuer applied safety measures, recipient applied safety measures. 1.6 Access permits recipient s job management responsibilities are described. before starting work, during work, on completion of work. 1.7 Access permits issuer s job management responsibilities are described in terms of SM-EI. Outcome 2 Demonstrate knowledge of the requirements to request an access permit for work on high voltage lines. 2.1 The requirements for a permit are described in terms of what is necessary before work can commence. may include but is not limited to equipment removed from service, equipment being erected, and equipment being dismantled; evidence of two is required. 2.2 Consultation requirements are described in terms of reasonable notice, work description, identification of safety measures. 2.3 The requirements for boundary marking and notices are described. may include but is not limited to placement and removal of permit rope, defined points of entry, control of defined entry points, permit rope crossing, notices display for access permit, display for test permit, barrier notices near live equipment; evidence of three is required. Outcome 3 Demonstrate knowledge of the responsibilities of recipients returning access permits for high voltage lines. 3.1 The description outlines the recipient confirmation responsibilities if all the work is complete in accordance with the SM-EI.
4 Page 4 of The description outlines the recipient confirmation responsibilities if all the work is not complete in accordance with the SM-EI. 3.3 The description outlines the confirmation procedure when the recipient is not able to personally return the permit in accordance with the SM-EI. Outcome 4 Demonstrate recipient requirements to accept and return an access permit for work on high voltage lines. 4.1 An access permit is accepted. acceptance includes by hand, by telephone, by radio; relaying by telephone and radio; transferring a permit; modifying a permit; evidence of three methods is required. 4.2 Demonstrate the procedures for return of an access permit. procedures under normal circumstances, procedure when the recipient is not able to personally return the permit. 4.3 Information is recorded in the required format and filed in accordance with company or asset owner s requirements. may include original issuer records, recipient site originated records; evidence of one method is required. Planned review date 31 December 2018 Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration 1 23 November December 2016 Review 2 22 October December 2016 Rollover and Revision 3 25 October December 2016 Review 4 20 March 2014 N/A Consent and Moderation Requirements (CMR) reference 0120 This CMR can be accessed at
5 Page 5 of 5 Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards. Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards. Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. Comments on this unit standard Please contact the at qualifications@infrastructureito.org.nz if you wish to suggest changes to the content of this unit standard.
Demonstrate the requirements for holding permits on high voltage electrical equipment
Page 1 of 6 Demonstrate the requirements for holding permits on high voltage electrical equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: describe the requirements
More informationNZQA registered unit standard version 3 Page 1 of 5. Install high voltage (HV) electricity network overhead conductors
Page 1 of 5 Title Install high voltage (HV) electricity network overhead conductors Level 4 Credits 8 Purpose People credited with this unit standard are able to: interpret scope of work for installing
More informationNZQA registered unit standard version 4 Page 1 of 5. Operate power-operated elevating work platforms (EWP) in an electricity supply environment
Page 1 of 5 Title Operate power-operated elevating work platforms (EWP) in an electricity supply environment Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate knowledge
More informationNZQA registered unit standard version 4 Page 1 of 5. Carry out switching operations on metal clad switchgear
Page 1 of 5 Title Carry out switching operations on metal clad switchgear Level 4 Credits 3 Purpose People credited with this unit standard are able to: demonstrate knowledge of metal clad switchgear,
More informationNZQA registered unit standard version 4 Page 1 of 6. Carry out acceptance, commissioning and maintenance tests on power transformers
Page 1 of 6 Title Carry out acceptance, commissioning and maintenance tests on power transformers Level 4 Credits 6 Purpose People credited with this unit standard are able to: prepare to test power transformers
More informationNZQA registered unit standard version 6 Page 1 of 6
Page 1 of 6 Title Operate hydro-electric generating plant on site Level 4 Credits 8 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles of hydro-electric
More informationCarry out acceptance and maintenance tests on distance protection relays
Page 1 of 5 Carry out acceptance and maintenance tests on distance protection relays Level 5 Credits 4 Purpose People credited with this unit standard are able to: prepare for acceptance and maintenance
More informationNZQA registered unit standard 9536 version 5 Page 1 of 6. Undertake petrochemical wellhead maintenance activities under supervision
Page 1 of 6 Title Undertake petrochemical wellhead maintenance activities under supervision Level 3 Credits 4 Purpose This unit standard applies to operational activities carried out on producing wellheads.
More informationPlan and manage helicopter overhead lines operation
Page 1 of 5 Plan and manage helicopter overhead lines operation Level 5 Credits 10 Purpose People credited with this unit standard are able, for helicopter overhead lines operations, to: plan; organise
More informationNZQA registered unit standard 9537 version 5 Page 1 of 6. This unit standard applies to operational activities carried out on producing wellheads.
Page 1 of 6 Title Replace faulty petrochemical wellhead equipment Level 4 Credits 8 Purpose This unit standard applies to operational activities carried out on producing wellheads. People credited with
More informationNZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Display products in the salon environment Level 2 Credits 3 Purpose This unit standard is for entry-level learners working and intending to work in a salon People credited with this unit
More informationOperate hydro-electric station auxiliary plant
Page 1 of 6 Operate hydro-electric station auxiliary plant Level 4 Credits 8 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles of electricity generation
More informationNZQA registered unit standard version 5 Page 1 of 6. Operate hydro-electric generating plant from enterprise control room
Page 1 of 6 Title Operate hydro-electric generating plant from enterprise control room Level 6 Credits 16 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles
More informationNZQA registered unit standard version 5 Page 1 of 5. Manage hazard identification and control on plant and machinery
Page 1 of 5 Title Manage hazard identification and control on plant and machinery Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: hazards associated with plant and
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Apply occupational health and safety requirements in the road transport and logistics industry Level 5 Credits 8 Purpose This unit standard is designed for team leaders, despatchers,
More informationNZQA registered unit standard 9506 version 5 Page 1 of 5. Conduct a sample analysis in a petrochemical laboratory
Page 1 of 5 Title Conduct a sample analysis in a petrochemical laboratory Level 4 Credits 6 Purpose This unit standard is for people employed in the petrochemical industry. People credited with this unit
More informationNZQA registered unit standard 6405 version 8 Page 1 of 5. Determine advertising options for small business enterprises. Marketing > Generic Marketing
Page 1 of 5 Title Determine advertising options for small business enterprises Level 4 Credits 5 Purpose People credited with this unit standard are able to: identify business and marketing objectives,
More informationApply earths to and remove earths from electrical conductors, plant and equipment
Page 1 of 5 Apply earths to and remove earths from electrical conductors, plant and equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: demonstrate knowledge of earthing
More informationNZQA registered unit standard version 1 Page 1 of 5. Diagnose and repair faulty electronic equipment to component level
Page 1 of 5 Title Diagnose and repair faulty electronic equipment to component level Level 4 Credits 40 Purpose This unit standard is intended for electronics technicians who are responsible for the diagnosis
More informationManage electricity generation dispatch
Page 1 of 6 Manage electricity generation dispatch Level 6 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of principles of power system operation; identify
More informationInstall and commission high voltage (HV) electricity current transformer metering
Page 1 of 5 Install and commission high voltage (HV) electricity current transformer metering Level 4 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of the
More informationNZQA unit standard version 6 Page 1 of 5. Apply and remove safety measures in an electricity supply environment
Page 1 of 5 Title Apply and remove safety measures in an electricity supply environment Level 3 Credits 3 Purpose People credited with this unit standard are able to: demonstrate knowledge of safe working
More informationNZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply advanced knowledge of power system engineering
Page 1 of 5 Title Demonstrate and apply advanced knowledge of power system engineering Level 6 Credits 15 Purpose This unit standard covers knowledge of three-phase power systems with an emphasis on distribution
More informationNZQA registered unit standard 5555 version 6 Page 1 of 5
Page 1 of 5 Title Arrange and manage a visitor conference Level 5 Credits 20 Purpose People credited with this unit standard are able to: plan operations for a visitor conference; manage monetary, human
More informationNZQA registered unit standard version 2 Page 1 of 5. Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident
Page 1 of 5 Title Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: the interrelated
More informationELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and service on oil filled distribution power transformers 11kV to 400V
1 of 8 level: 4 credit: 8 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for routine service transformers
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Demonstrate and apply knowledge of safe welding principles and quality assurance under supervision Level 2 Credits 4 Purpose This unit standard is for the training of mechanical engineering
More informationNZQA registered unit standard version 1 Page 1 of 5. Develop, implement and review a HACCP application for a food processing operation
Page 1 of 5 Title Develop, implement and review a HACCP application for a food processing operation Level 5 Credits 20 Purpose This unit standard is for experienced people required to have in-depth knowledge
More informationCarry out routine inspection and servicing on substation emergency services
Page 1 of 6 Carry out routine inspection and servicing on substation emergency services Level 3 Credits 4 Purpose People credited with this unit standard are able to: prepare for inspection and servicing
More informationELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and servicing on high voltage minimum oil circuit breakers
1 of 9 level: 4 credit: 6 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for inspection, testing
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Formulate event management strategies and coordinate event management services for a public relations event Level 6 Credits 10 Purpose This unit standard is for people who have, or seek
More informationNZQA registered unit standard version 1 Page 1 of 5. Identify and inspect road safety barrier systems on Infrastructure Works sites
Page 1 of 5 Title Identify and inspect road safety barrier systems on Infrastructure Works sites Level 4 Credits 10 Purpose People credited with this unit standard are able to: identify and explain road
More informationCarry out routine inspection and servicing on high voltage bulk oil circuit breakers
Page 1 of 6 Carry out routine inspection and servicing on high voltage bulk oil circuit breakers Level 4 Credits 6 Purpose People credited with this unit standard are able to: prepare for inspection, testing
More informationThis unit standard is expiring
Page 1 of 5 Title Apply intelligence analysis techniques to complete an intelligence product Level 5 Credits 15 Purpose People credited with this unit standard are able to: define the intelligence problem
More informationNZQA registered unit standard 9184 version 6 Page 1 of 5
Page 1 of 5 Title Erect and dismantle non-notifiable prefabricated frame scaffolding up to five metres in height Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate
More informationMeasure and prune trees around electricity lines for vegetation control to minimum approach distance
Page 1 of 5 Measure and prune trees around electricity lines for vegetation control to minimum approach distance Level 4 Credits 8 Purpose People credited with this unit standard are able to: select tree
More informationNZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Describe the preparation of, set up, and simultaneously operate, a multi-winch crane during crane operations Level 4 Credits 6 Purpose People credited with this unit standard are able
More informationNZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Assess the optimisation of a drinking-water treatment plant, and describe critical control points Level 5 Credits 10 Purpose People credited with this unit standard are able to: assess
More informationNZQA registered unit standard version 1 Page 1 of 6. Demonstrate knowledge of managing conflict situations in a security context
Page 1 of 6 Title Demonstrate knowledge of managing conflict situations in a security context Level 2 Credits 4 Purpose This unit standard covers knowledge of conflict management for security personnel.
More informationCarry out routine inspection and service on high voltage indoor metal clad circuit breakers and bus
Page 1 of 7 Carry out routine inspection and service on high voltage indoor metal clad circuit breakers and bus Level 4 Credits 4 Purpose People credited with this unit standard are able to: prepare for
More informationNZQA registered unit standard version 2 Page 1 of 5. Operate x-ray and electronic scanning equipment in a prison environment
Page 1 of 5 Title Operate x-ray and electronic scanning equipment in a prison environment Level 4 Credits 5 Purpose This unit standard is for people working as officers in a prison environment and covers
More informationNZQA registered unit standard version 6 Page 1 of 5. Operate biological treatment systems for effluent water in an energy and chemical plant
Page 1 of 5 Title Operate biological treatment systems for effluent water in an energy and chemical plant Level 4 Credits 8 Purpose This unit standard is for people working as boiler operators and energy
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Slice and package bread in a plant bakery Level 4 Credits 10 Purpose This unit standard is for people working or intending to work in a plant bakery as a baking tradesperson. People credited
More informationNZQA registered unit standard version 3 Page 1 of 5. Carry out automated assembly of wood packaging products
Page 1 of 5 Title Carry out automated assembly of wood packaging products Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate knowledge of the health and safety issues
More informationNZQA registered unit standard 1512 version 8 Page 1 of 6
Page 1 of 6 Title Supervise asphalt paving construction activities Level 4 Credits 18 Purpose This unit standard is designed for people working in the pavement surfacing industry, towards recognition of
More informationNZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of costs to the pricing of a road transport service
Page 1 of 5 Title Demonstrate and apply knowledge of costs to the pricing of a road transport service Level 5 Credits 7 Purpose This unit standard is intended for people who are required to prepare quotes
More informationNZQA registered unit standard version 2 Page 1 of 5. Develop training and support programmes, and recruit, appoint, and manage CDEM volunteers
Page 1 of 5 Title Develop training and support programmes, and recruit, appoint, and manage CDEM volunteers Level 5 Credits 6 Purpose This unit standard is intended for people who fulfil the role of a
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Operate the drill rig for horizontal directional drilling Level 3 Credits 15 Purpose People credited with this unit standard are able to: care for and maintain horizontal directional
More informationNZQA Expiring unit standard version 6 Page 1 of 5. Operate a clamshell die cutter in the corrugated packaging industry
Page 1 of 5 Title Operate a clamshell die cutter in the corrugated packaging industry Level 3 Credits 8 Purpose People credited with this unit standard are able to: plan ahead, to avoid delays during make
More informationNZQA registered unit standard version 2 Page 1 of 5. Complete pre-competition preparations as an official at a competitive sports event
Page 1 of 5 Title Complete pre-competition preparations as an official at a competitive sports event Level 3 Credits 3 Purpose This unit standard is designed primarily for people seeking to further develop
More informationNZQA registered unit standard version 7 Page 1 of 5. Demonstrate and apply knowledge of safeguards for use with portable electrical appliances
Page 1 of 5 Title Demonstrate and apply knowledge of safeguards for use with portable electrical appliances Level 2 Credits 3 Purpose This unit standard covers knowledge of safeguards used in conjunction
More informationNZQA registered unit standard version 2 Page 1 of 5. Create appointments and maintain appointment systems and records in the salon environment
Page 1 of 5 Title Create appointments and maintain appointment systems and records in the salon environment Level 3 Credits 5 Purpose This is a practically based unit standard for people who create and
More informationNZQA registered unit standard version 2 Page 1 of 5. Apply design principles in the design of scaffolding
Page 1 of 5 Title Apply design principles in the design of scaffolding Level 5 Credits 12 Purpose This unit standard is for people who have intermediate scaffolding skills and who want to develop their
More informationNZQA unit standard version 1 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of the Electricity Act, circuit protection and compliance testing of works or installations Level 5 Credits 10 Purpose People credited with this unit standard are
More informationNZQA registered unit standard 2930 version 5 Page 1 of 5
Page 1 of 5 Title Develop and coordinate marketing strategies Level 6 Credits 10 Purpose This unit standard is for people who have, or seek responsibility for, or provide advice for, developing the strategic
More informationNZQA registered unit standard version 2 Page 1 of 5. Use a mini-crawler crane with outriggers to lift and place regular loads
Page 1 of 5 Title Use a mini-crawler crane with outriggers to lift and place regular loads Level 3 Credits 15 Purpose People credited with this unit standard are able to: prepare to lift and place regular
More informationNZQA registered unit standard version 2 Page 1 of 5. Select and use tools and workshop equipment in the industrial textile fabrication industry
Page 1 of 5 Title Select and use tools and workshop equipment in the industrial textile fabrication industry Level 3 Credits 6 Purpose This unit standard is for people entering or working in the industrial
More informationNZQA Expiring unit standard 2272 version 8 Page 1 of 5
Page 1 of 5 Title Print single colour work on a reel-fed printing press Level 3 Credits 20 Purpose People credited with this unit standard are able to: demonstrate knowledge of factors affecting printing
More informationNZQA registered unit standard version 5 Page 1 of 5. Carry out the functions of the poleman on a cable harvesting landing
Page 1 of 5 Title Carry out the functions of the poleman on a cable harvesting landing Level 3 Credits 10 Purpose This unit standard is intended for people employed as a poleman in a cable harvesting operation.
More informationThis unit standard is expiring
Page 1 of 5 Title Prepare edible green bovine offal products for packaging Level 2 Credits 10 Purpose This entry level unit standard is for people who are employed in the offal department of meat processing
More informationNZQA unit standard version 2 Page 1 of 5. Demonstrate understanding of a HACCP application in a food processing operation
Page 1 of 5 Title Demonstrate understanding of a HACCP application in a food processing operation Level 4 Credits 10 Purpose This unit standard is for experienced operators and others required to have
More informationPUBLIC SECTOR SERVICE DELIVERY Develop public sector service delivery objectives, and implement systems to meet client needs
1 of 5 level: 7 credit: 20 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Operate systems for boiler feedwater treatment Level 4 Credits 15 Purpose This unit standard is for people working as boiler operators and energy and chemical process operators in an
More informationNZQA Expiring unit standard 3713 version 7 Page 1 of 6. Print single colour work on a sheet-fed registering offset press
Page 1 of 6 Title Print single colour work on a sheet-fed registering offset press Level 3 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of factors affecting
More informationNZQA registered unit standard 4884 version 7 Page 1 of 5. Recruit, induct, and manage volunteers in a recreation organisation
Page 1 of 5 Title Recruit, induct, and manage volunteers in a recreation organisation Level 5 Credits 6 Purpose This unit standard is intended for a person working in a recreation facility in a supervisory
More informationNZQA Expiring unit standard 3885 version 8 Page 1 of 5. Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry
Page 1 of 5 Title Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry Level 2 Credits 4 Purpose This unit standard is for people who are at pre-employment level or
More informationNZQA registered unit standard version 1 Page 1 of 5. Demonstrate and apply knowledge of maintenance plans for mechanical equipment and plant
Page 1 of 5 Title Demonstrate and apply knowledge of maintenance plans for mechanical equipment and plant Level 5 Credits 8 Purpose This unit standard is for people who carry out maintenance on mechanical
More informationNZQA registered unit standard Version 1 Page 1 of 5. Demonstrate operational knowledge of the law in a regulatory compliance context
Page 1 of 5 Title Demonstrate operational knowledge of the law in a regulatory compliance context Level 4 Credits 12 Purpose People credited with this unit standard are able to: demonstrate knowledge of
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Operate timber treatment plant Level 3 Credits 15 Purpose People credited with this unit standard are able to: manage hazards associated with operating and maintaining timber treatment
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Carry out carpet repairs and reinstallation Level 3 Credits 8 Purpose This unit standard is for people training for the carpet cleaning industry. People credited with this standard are
More informationNZQA registered unit standard 6945 version 7 Page 1 of 5. Forestry > Forest Mechanised Harvesting
Page 1 of 5 Title Fell trees using a mechanised harvesting machine Level 4 Credits 20 Purpose This unit standard is intended for people employed in a mechanised tree felling role in a forestry harvesting
More informationNZQA registered unit standard version 2 Page 1 of 6. Demonstrate professional and ethical behaviour as an engineering technician
Page 1 of 6 Title Demonstrate professional and ethical behaviour as an engineering technician Level 6 Credits 15 Purpose This unit standard is intended for people working towards the New Zealand Diploma
More informationPUBLIC SECTOR SERVICE DELIVERY Establish client needs and gain agreement on requirements for public sector service delivery
1 of 5 level: 6 credit: 15 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationNZQA registered unit standard version 6 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of circuit protection Level 3 Credits 3 Purpose This unit standard is for electricians and related trades who need to understand and select devices for the protection
More informationNZQA registered unit standard version 1 Page 1 of 7. Plan and fell trees using advanced techniques in a commercial forest harvesting operation
Page 1 of 7 Title Plan and fell trees using advanced techniques in a commercial forest harvesting operation Level 4 Credits 25 Purpose This unit standard is intended for professional tree fellers in a
More informationNZQA registered unit standard 3846 version 7 Page 1 of 7. Maintain commercial refrigeration and/or air conditioning systems
Page 1 of 7 Title Maintain commercial refrigeration and/or air conditioning systems Level 3 Credits 20 Purpose This unit standard is for people who work in the refrigeration and air conditioning sector
More informationNZQA registered unit standard version 1 Page 1 of 7. Fell trees in a commercial forest harvesting operation
Page 1 of 7 Title Fell trees in a commercial forest harvesting operation Level 3 Credits 10 Purpose This unit standard is designed for people who work as a tree feller on a day-to-day basis in a commercial
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Describe drinking-water supply reticulation systems Level 5 Credits 8 Purpose People credited with this unit standard are able to describe: the reticulated services found on public and
More informationNZQA registered unit standard 738 version 5 Page 1 of 7
Page 1 of 7 Title Kiln dry timber Level 4 Credits 25 Purpose People credited with this unit standard are able to: demonstrate knowledge of kiln drying operations; demonstrate knowledge of dry and wet bulb
More informationNZQA registered unit standard 3851 version 7 Page 1 of 5. Service commercial refrigeration and/or air conditioning systems
Page 1 of 5 Title Service commercial refrigeration and/or air conditioning systems Level 4 Credits 20 Purpose This unit standard is for people who work in the refrigeration and air conditioning sector
More informationNZQA Expiring unit standard version 2 Page 1 of 5. Demonstrate knowledge of liquid roof membrane systems
Page 1 of 5 Title Demonstrate knowledge of liquid roof membrane systems Level 2 Credits 6 Purpose People credited with this unit standard are able to demonstrate knowledge: of liquid roof membrane substrates
More informationNZQA registered unit standard version 2 Page 1 of 5. Describe drinking-water contaminants of public health significance
Page 1 of 5 Title Describe drinking-water contaminants of public health significance Level 4 Credits 8 Purpose People credited with this unit standard are able to describe: the relationship between drinking-water
More informationNZQA registered unit standard 6973 version 7 Page 1 of 5. Prune plantation trees with a chainsaw from the ground
Page 1 of 5 Title Prune plantation trees with a chainsaw from the ground Level 3 Credits 10 Purpose This unit standard is intended for people employed in a pruning role in a commercial forestry operation.
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Analyse surface material and construction requirements and apply to developed kitchen or bathroom designs Level 5 Credits 10 Purpose This unit standard is for experienced people working
More informationNZQA registered standard version 2 Page 1 of 7. Demonstrate and apply competence as an engineering technician
Page 1 of 7 Title Demonstrate and apply competence as an engineering technician Level 6 Credits 60 Purpose This unit standard is for people working towards the New Zealand Diploma in Engineering Practice
More informationNZQA unit standard version 1 Page 1 of 5
Page 1 of 5 Title Apply safe working procedures and practices in an electrotechnology environment and identify and control special hazards Level 3 Credits 5 Purpose This unit standard is designed to meet
More informationLOGISTICS OPERATIONS Plan distribution centre structure and equipment for a logistics operation
1 of 5 level: 5 credit: 8 planned review date: February 2004 sub-field: purpose: entry information: accreditation option: moderation option: Logistics People credited with this unit standard are able to:
More informationNZQA Expiring unit standard version 2 Page 1 of 5. Describe roof membrane preparation and installation procedures
Page 1 of 5 Title Describe roof membrane preparation and installation procedures Level 3 Credits 10 Purpose People credited with this unit standard are able to describe: project planning activities; plywood
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of Micro-Hydro Systems Level 4 Credits 15 Purpose This unit standard is for people who work with renewable energy systems and covers knowledge of the design and
More informationNZQA registered unit standard version 4 Page 1 of 5. Forestry > Tree Felling
Page 1 of 5 Title Fell trees safely using a chainsaw Level 3 Credits 10 Purpose People completing this unit standard will have the skills required to safely fell individual trees using basic techniques.
More informationNZQA registered unit standard version 1 Page 1 of 7
Page 1 of 7 Title Manage conflict situations in a security context Level 3 Credits 4 Purpose This unit standard covers the management of conflict situations by security personnel. People credited with
More informationNZQA registered unit standard version 2 Page 1 of 5. Generate chlorine dioxide for wood pulp bleaching
Page 1 of 5 Title Generate chlorine dioxide for wood pulp bleaching Level 5 Credits 15 Purpose People credited with this unit standard are able to: explain fundamentals of chlorine dioxide generation;
More informationNZQA registered unit standard 1243 version 8 Page 1 of 5. Forestry > Forest Silvicultural Operations
Page 1 of 5 Title Prune plantation trees from the ground Level 3 Credits 10 Purpose This unit standard is intended for people employed in a pruning role in a forestry operation. People credited with this
More informationInstruct a programme using low ropes course activities
Page 1 of 5 Instruct a programme using low ropes course activities Level 5 Credits 5 Purpose People credited with this unit standard are able to: prepare for instructing low ropes course activities; instruct
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of electric lighting systems Level 3 Credits 6 Purpose This unit standard covers knowledge of electric lighting for electricians and related trades. People credited
More informationNZQA Expiring unit standard version 6 Page 1 of 5. Conduct prisoner and security searches in a prison environment
Page 1 of 5 Title Conduct prisoner and security searches in a prison environment Level 4 Credits 6 Purpose This unit standard is for people working as officers in a prison environment and covers conducting
More informationNZQA registered unit standard version 1 Page 1 of 5. Determine and describe construction of medium and large buildings
Page 1 of 5 Title Determine and describe construction of medium and large buildings Level 6 Credits 20 Purpose People credited with this unit standard are able to, for medium and large buildings, determine
More informationNZQA Expiring unit standard version 2 Page 1 of 5. Describe metal roof and wall cladding preparation and installation procedures
Page 1 of 5 Title Describe metal roof and wall cladding preparation and installation procedures Level 3 Credits 10 Purpose People credited with this unit standard are able to describe: the planning and
More informationDemonstrate knowledge of servicing automotive air conditioning systems
Demonstrate knowledge of servicing automotive air conditioning systems 24448 version 1 Page 1 of 5 Level 3 Credits 2 Purpose This theory-based unit standard is for people in the automotive repair industry.
More informationNZQA registered unit standard version 1 Page 1 of 5. Construction Trades > Painting and Decorating
Page 1 of 5 Title Apply advanced decorative paint finishes Level 5 Credits 20 Purpose This specialist unit standard is for people working in the painting area of the painting and decorating sector. People
More information