SFSSCN4 Oversee the implementation of security measures

Size: px
Start display at page:

Download "SFSSCN4 Oversee the implementation of security measures"

Transcription

1 Overview This NOS defines the national standard of occupational competence covering overseeing the implementation of security measures. The NOS encourages you take account of working to agreed specifications whilst maintaining compliance with current legal and regulatory requirements during implementation of security measures. This NOS sets the standard for you to: 1 against agreed specifications 2 Research and maintain compliance with current legal and regulatory requirements during implementation of security measures 3 Co-ordinate implementation of security measures against agreed project plans 4 Assess the effectiveness of implementing security measures You must be competent to confirm with appropriate persons clearly the responsibilities which individuals have for meeting design requirements and specifications. You must be able to confirm arrangements for inspecting and controlling the quality of work and recording the outcomes. This means that you must know and understand how and from where to obtain specifications relevant to contract and how and why it is important to confirm the responsibilities for meeting specifications with the appropriate persons. When you complete inspections you must be able to identify work which fails to meet the agreed specifications and agree corrective action. During the implementation of security measures you must obtain, know and understand current relevant legal and regulatory requirements. You must be able to confirm with appropriate persons their legal and statutory responsibilities before work starts. The knowledge that you have to be competent in this area includes understanding how to identify situations, which do not meet legal or regulatory requirements, and what action to take. You must know and understand why it is important to inform clients about significant variations in project implementation, which means that you may need to provide advice to assist decision making. You will be expected to identify potential improvements and highlight benefits of the improvements to your clients. You must be able to identify and determine the implications of any deviations or variations from planned progress, which have occurred. This means that you should know how to agree with the appropriate persons any necessary action to be taken. SFSSCN4-1

2 You must be able to complete any required documentation accurately and within agreed timescale. You should also know and understand how and why you should maintain the security and confidentiality of information relevant to your clients and their security aims and objective. SFSSCN4-2

3 Performance criteria against agreed specifications You must be able to: P1 P2 P3 P4 P5 P6 P7 P8 P9 confirm that people responsible for implementation have and understand the requirements of relevant specifications before work is started confirm with appropriate persons clearly the responsibilities which individuals have for meeting design requirements and specifications agree with appropriate persons arrangements for inspecting and controlling the quality of work and recording the outcomes ensure at agreed intervals that work meets the agreed design requirements and specifications identify work which fails to meet the recommended specifications and agree corrective action inform clients promptly about significant variations from design requirements and specifications, and suggest remedial actions when necessary identify potential improvements and recommend to client, highlighting benefits of the improvements negotiate and agree amendments to contract specifications with clients and accurately record relevant details maintain the security and confidentiality of information relevant to clients and their security aims and objectives You must be able to: Research and maintain compliance with current legal and regulatory requirements during implementation of security measures P10 obtain current legal and regulatory requirements from relevant sources P11 confirm with appropriate persons their legal and statutory responsibilities before implementation work starts P12 agree arrangements with appropriate persons for inspecting and controlling compliance with legal and regulatory requirements P13 identify situations which do not meet legal and regulatory requirements and take appropriate action P14 identify any new legal and regulatory requirements which may impact on the project and provide this information to the appropriate persons P15 complete required documentation accurately and within agreed timescale P16 maintain the security and confidentiality of information relevant to clients and their security aims and objectives Co-ordinate implementation of security measures against agreed project plans You must be able to: P17 agree arrangements with appropriate persons to monitor and record the progress of implementation of measures against agreed project plans P18 identify and determine the implications of any deviations from planned progress which have occurred SFSSCN4-3

4 P19 agree with the appropriate person and implement any action necessary to prevent disruption to progress of implementation of project plans P20 inform clients at agreed intervals about progress, changes to the operational programme or resource needs and suggest any actions that could improve the implementation of security measures P21 complete required documentation accurately and within agreed timescale P22 maintain the security and confidentiality of information relevant to clients and their security aims and objectives Assess the effectiveness of implementing security measures You must be able to: P23 set up and apply processes for monitoring the effectiveness of implementing security measures P24 investigate any variations from expected effectiveness, and agree with appropriate persons and initiate appropriate remedial action P25 identify potential improvements to security measures and recommend them to your clients, emphasising the benefits of the improvements P26 maintain the security of assets whilst implementing new arrangements P27 maintain the security and confidentiality of information relevant to your clients and their security aims and objectives SFSSCN4-4

5 Knowledge and understanding against agreed specifications You need to know and understand: K1 K2 K3 K4 K5 K6 K7 K8 current relevant legislation, regulations, codes of practice and guidelines relating to implementation of security measures how and from where to obtain specifications relevant to contracts how and why it is important to confirm the responsibilities for meeting specifications to appropriate persons how and why it is important to discuss with clients significant variations in project implementation and to provide advice to assist decision making how to identify and recommend potential improvements to the contract specification to your clients how and why it is important to identify work which fails to meet specifications and to advise on corrective action options how to ensure work conforms to design requirements and quality standards how and why you should maintain the security and confidentiality of information Research and maintain compliance with current legal and regulatory requirements during implementation of security measures You need to know and understand: K9 current relevant legislation, regulations, codes of practice and guidelines relating to providing security measures K10 how and from where to obtain legal and regulatory requirements K11 how and why it is important to confirm the legal and regulatory responsibilities with the appropriate persons K12 how to identify situations which do meet legal or regulatory requirements and take appropriate action K13 how and why it is important to identify new legal and regulatory requirements which may impact on projects K14 how and why you should complete documentation accurately and within agreed timescale K15 how and why you should maintain the security and confidentiality of information Co-ordinate implementation of security measures against agreed project plans You need to know and understand: K16 current relevant legislation, regulations, codes of practice and guidelines relating to providing security measures K17 how to identify and quantify any deviations from planned progress K18 how to evaluate the implications of deviations from project plans K19 how and why you should identify deviations which may disrupt the project and agree and implement any necessary action K20 how to identify resource needs and how to identify alternative resources SFSSCN4-5

6 K21 how to identify and recommend improvements to your clients K22 how and why you should maintain the security and confidentiality of information Assess the effectiveness of implementing security measures You need to know and understand: K23 how to investigate any variations from expected effectiveness and implement appropriate action which rectify unacceptable variations K24 how to identify realistic opportunities for improving security measures and recommending them to clients K25 why it is important to maintain the security of assets when implementing new arrangements K26 how and why you should maintain the security and confidentiality of information SFSSCN4-6

7 Additional Information Scope/range related to performance criteria against agreed specifications 1 specifications: statutory requirements, project design, Industry Standards (BSI, ISO), Codes of Practice, organisational standards 2 appropriate persons: clients, contractors, consultants, sub-contractors, suppliers, workforce, agents 3 arrangements for inspections: visual inspection, design requirements, documentation, testing, reports, meetings 4 variations: progress, security and safety implications 5 benefits: efficiency in implementation, effectiveness of measures, financial, operational Research and maintain compliance with current legal and regulatory requirements during implementation of security measures 6 legal and statutory requirements: current relevant legislation, regulations, codes of practice, guidelines health and safety, fire, licences 7 appropriate person: client contractor consultant sub-contractor suppliers workforce agent 8 arrangements: visual inspection design requirements documentation testing reports meetings 9 documentation: electronic paper Co-ordinate implementation of security measures against agreed project plans 10 arrangements visual inspections, records, reports, meetings, payments 11 deviations: resource shortage, design problems, constraints, legal 12 appropriate person: client contractor, consultant, sub-contractor, suppliers, agent 13 resource: people, equipment materials, components finance, specialist services 14 documentation: progress reports, test results Assess the effectiveness of implementing security measures 15 variations: financial operations 16 appropriate persons: clients, contractors, consultants, sub-contractors, suppliers 17 assets: people, property, premises, information, reputation, brand SFSSCN4-7

8 Developed by Skills for Security Version number Date approved Indicative review date Validity Status Originating organisation Original URN Relevant occupations Suite Key words Current Original Skills for Security SCN4 Managers and Senior Officials; Protective Service Officers; Elementary Occupations; Elementary Security Occupations Security Consultancy Legal, Projects, Regulations, Regulatory, Research, Security, Security Measures, Specifications SFSSCN4-8

COSCSMO15 SQA Unit Code H99L 04 Control projects in construction management

COSCSMO15 SQA Unit Code H99L 04 Control projects in construction management Overview This unit is about controlling projects. You will identify quality standards and pass them to the project team. You will set up systems for recording the quality of work against these standards,

More information

SFSREM8 Maintain the performance of remote monitoring systems

SFSREM8 Maintain the performance of remote monitoring systems Overview This NOS sets out the skills, knowledge and understanding for an effective maintenance regime of remote monitoring systems. This NOS covers the following activities: 1. Identify, create and monitor

More information

COSVR709 - SQA Unit Code H6AR 04 Control work against agreed quality standards

COSVR709 - SQA Unit Code H6AR 04 Control work against agreed quality standards Overview This standard is about 1 implementing given quality assurance control procedures 2 checking quality of work against agreed standards 3 taking appropriate action to correct deficiencies COSVR709

More information

Unit: CPC 421 Manage contracts to achieve outcomes (Commissioning, Procurement and Contracting)

Unit: CPC 421 Manage contracts to achieve outcomes (Commissioning, Procurement and Contracting) Unit: CPC 421 Manage contracts to achieve outcomes (Commissioning, Procurement and Contracting) Key Purpose The key purpose identified for those working in commissioning, procurement and contracting is

More information

COSVR728 - SQA Unit Code F3H7 04 Evaluate and select work methods

COSVR728 - SQA Unit Code F3H7 04 Evaluate and select work methods Overview This standard is about 1 assessing and evaluating information 2 identifying safe and healthy work methods 3 identifying how materials and resources will be used 4 preparing, producing and agreeing

More information

PROSMD14 Assess, plan and control capital costs for development

PROSMD14 Assess, plan and control capital costs for development Assess, plan and control capital costs for development Overview This standard has three elements: 1 assess ad advise on project cost strategies 2 plan and control proposed costs 3 prepare estimates of

More information

CFABAA SQA Unit Code FE17 04 Prepare, co-ordinate and monitor operational plans

CFABAA SQA Unit Code FE17 04 Prepare, co-ordinate and monitor operational plans Overview This standard is about preparing, co-ordinating, implementing and monitoring operational plans in line with organisational policies and procedures and legal requirements. It includes identifying

More information

COSCCOMO07 - SQA Unit Code FM70 04 Identify, assess and evaluate project requirements in construction contracting operations management

COSCCOMO07 - SQA Unit Code FM70 04 Identify, assess and evaluate project requirements in construction contracting operations management Identify, assess and evaluate project requirements in construction Overview This unit is about the procurement and use of resources. You will need to identify and agree goals and priorities with the project

More information

COSVR586(SQA Unit Code-H4X8 04) Resolve indeterminate situations

COSVR586(SQA Unit Code-H4X8 04) Resolve indeterminate situations Overview This standard is about 1 identifying where indeterminate situations exist 2 obtaining and testing information required for analysis 3 analysing differing perceptions of situations 4 applying aids

More information

COSCSMO08 SQA Unit Code H99R 04 Evaluate sustainable resources and requirements for the whole life cycle of a construction project

COSCSMO08 SQA Unit Code H99R 04 Evaluate sustainable resources and requirements for the whole life cycle of a construction project the whole life cycle of Overview This unit is about assessing and quantifying the whole life cost and low carbon cost implications for the project. You will need to review them against the project criteria

More information

COSVR702 - SQA Unit Code H6AL 04 Plan work activities and resources to meet work requirements

COSVR702 - SQA Unit Code H6AL 04 Plan work activities and resources to meet work requirements Plan work activities and resources to meet work requirements Overview This standard is about 1 planning the appropriate sequence, timing and resources 2 ensuring programmed operations meet project requirements

More information

COSCCOMO17 Optimise and control contract progress and costs in construction contracting operations management

COSCCOMO17 Optimise and control contract progress and costs in construction contracting operations management Optimise and control contract progress and costs in construction Overview This unit is about developing systems to monitor and record progress and briefing decision makers. It is also about managing and

More information

COSCSMO05 SQA Unit Code H99M 04 Prepare and agree a project brief and outline programme in construction management

COSCSMO05 SQA Unit Code H99M 04 Prepare and agree a project brief and outline programme in construction management programme in construction Overview This unit is about managing projects and the team that delivers design solutions to meet the project brief. It is about ascertaining stakeholders' requirements, exploring

More information

EUSWM01 Manage the reception of waste

EUSWM01 Manage the reception of waste Overview This national occupational standard defines the competences required for managing the procedures for receiving waste and controlling its reception, inspection and validation. It requires the implementation

More information

COSAO01 Identify, assess and agree project requirements in asbestos bulk analysis

COSAO01 Identify, assess and agree project requirements in asbestos bulk analysis Identify, assess and agree project requirements in asbestos bulk Overview This unit is about identifying, and agreeing project requirements in asbestos surveying and. 1 Performance criteria You must be

More information

CFABAA122 SQA Unit Code FE18 04 Implement, monitor and maintain administrative services

CFABAA122 SQA Unit Code FE18 04 Implement, monitor and maintain administrative services Implement, monitor and maintain administrative Overview This standard is about planning, implementing and monitoring administrative to meet specified needs, recommending improvements where necessary. It

More information

COSVR712 - SQA Unit Code H6AS 04 Manage own professional development

COSVR712 - SQA Unit Code H6AS 04 Manage own professional development Overview This standard is about 1 managing your own knowledge, understanding, skills, experience and time 2 managing your own professional development in order to achieve your work objectives 3 ensuring

More information

SFJFS6 Review fire safety matters relating to existing or proposed construction

SFJFS6 Review fire safety matters relating to existing or proposed construction Review fire safety matters relating to existing or proposed construction Overview This standard is about commenting on the suitability of materials and the fire risks associated with the design, construction,

More information

Level 6 NVQ Diploma in Construction Site Management (Construction)

Level 6 NVQ Diploma in Construction Site Management (Construction) Level 6 NVQ Diploma in Construction Site Management (Construction) Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements

More information

CFABD4 Carry out a review of your business

CFABD4 Carry out a review of your business Overview This unit is important if you regularly review your business so you will have a clear idea of how it is doing. This will help you to: 1. spot problems quickly and deal with them before they get

More information

Overview COSCSMO14. Manage project processes in construction management. Manage project processes in construction management

Overview COSCSMO14. Manage project processes in construction management. Manage project processes in construction management Overview This standard is about preparing a strategy for the project using the most appropriate team. The needs of the stakeholders will need to be identified along with the requirements of the brief and

More information

BANK OF PAPUA NEW GUINEA POSITION DESCRIPTION TECHNICAL OFFICER FACILITIES /PROPERTIES MANAGEMENT DEPARTMENT (FPMD)

BANK OF PAPUA NEW GUINEA POSITION DESCRIPTION TECHNICAL OFFICER FACILITIES /PROPERTIES MANAGEMENT DEPARTMENT (FPMD) BANK OF PAPUA NEW GUINEA POSITION DESCRIPTION TECHNICAL OFFICER FACILITIES /PROPERTIES MANAGEMENT DEPARTMENT (FPMD) This Position Description outlines the role, skills, relationships, authorities and accountabilities.

More information

ECIPMD7 Monitor and review project risks

ECIPMD7 Monitor and review project risks Overview This standard is about monitoring and reviewing project risks. Risks may be opportunities, as wells as threats to the project. You will need to use accepted procedures to monitor project risks

More information

Level 6 NVQ Diploma in Construction Site Management (Construction)

Level 6 NVQ Diploma in Construction Site Management (Construction) Level 6 NVQ Diploma in Construction Site Management (Construction) Qualification Specification ProQual 2014 Contents Page Introduction 3 The Qualifications and Credit Framework (QCF) 3 Qualification profile

More information

CFAM&LED2 - SQA Unit Code HC02 04 Procure products and/or services

CFAM&LED2 - SQA Unit Code HC02 04 Procure products and/or services Overview This standard is about procuring products and/or services from external suppliers. This standard is relevant to managers and leaders who are not procurement specialists but are required to procure

More information

COSAO03 Identify, assess and agree project requirements in asbestos clearance testing

COSAO03 Identify, assess and agree project requirements in asbestos clearance testing Identify, assess and agree project requirements in asbestos clearance Overview This unit is about identifying, assessing and agreeing project requirements in asbestos clearance. 1 Performance criteria

More information

COSCCOO10 - SQA Unit Code F Implement contract work in construction

COSCCOO10 - SQA Unit Code F Implement contract work in construction Overview This unit is about organising and controlling resources, develop effective plans to meet contingencies, and inform those responsible for making necessary changes. You will need to identify quality

More information

219 Make sure your own actions reduce risks to health and safety

219 Make sure your own actions reduce risks to health and safety 219 Make sure your own actions reduce risks to health and safety QCF Reference Number R/501/0874 Level: 2 Credit Value: 5 Learning outcomes The learner will: 1. Identify the hazards and evaluate the risks

More information

CFAMLE9 - SQA Unit Code F2H3 04 Manage the environmental impact of your work

CFAMLE9 - SQA Unit Code F2H3 04 Manage the environmental impact of your work Overview This unit is about managing work activities and resources in your area of responsibility in order to minimise the negative impact and maximise the positive impact they may have on the environment.

More information

COGSBP24 Control Efficient Transport Usage within Sustainable Business Practice

COGSBP24 Control Efficient Transport Usage within Sustainable Business Practice Control Efficient Transport Usage within Sustainable Business Overview This standard is about supporting sustainable business practice through the implementation of programmes to improve transport efficiency.

More information

SFHPHARM03 - SQA Unit Code FA3E 04 Process pharmaceutical queries

SFHPHARM03 - SQA Unit Code FA3E 04 Process pharmaceutical queries Overview This standard covers the provision of pharmaceutical information and advice, including the sensitivity of providing such information and the need to pay attention to detail. It highlights the

More information

COSVR705 - SQA Unit Code H6AP 04 Allocate and monitor the use of plant, equipment or machinery

COSVR705 - SQA Unit Code H6AP 04 Allocate and monitor the use of plant, equipment or machinery Allocate and monitor the use of plant, equipment or machinery Overview This standard is about 1 ensuring plant, equipment or machinery is suitable and available 2 checking plant, equipment or machinery

More information

COSCCOMO12 - SQA Unit Code FM7D 04 Obtain tenders and appoint successful contractors in construction contracting operations management

COSCCOMO12 - SQA Unit Code FM7D 04 Obtain tenders and appoint successful contractors in construction contracting operations management Obtain tenders and appoint successful contractors in construction Overview This unit is about shortlisting and selecting appropriate tenderers. It is also the about the review and amendment of tender documents

More information

EUSWM02 - SQA Unit Code H2LF 04 Manage the movement, sorting and storage of waste

EUSWM02 - SQA Unit Code H2LF 04 Manage the movement, sorting and storage of waste Manage the movement, sorting and storage of waste Overview This national occupational standard defines the competences required in managing the procedures for the movement, sorting and storage of waste

More information

Overview SFJIB19. Provide first line welfare rights legal advice

Overview SFJIB19. Provide first line welfare rights legal advice Overview This standard is about providing clients with welfare rights information and advice at the point of initial contact with the service. You will work directly with clients to establish their needs

More information

SFS6 Work effectively with other agencies

SFS6 Work effectively with other agencies Overview This standard is about developing and sustaining effective working relationships with staff in other agencies. There are two elements: 1 2 Sustain effective working with staff in other agencies

More information

COSBEDMO09 - SQA Unit Code FM6F 04 Conduct condition surveys in built environment design management

COSBEDMO09 - SQA Unit Code FM6F 04 Conduct condition surveys in built environment design management Conduct condition surveys in built environment design management Overview This unit is concerned with undertaking and managing condition surveys. It is about deciding what surveys need to be done, and

More information

Overview SFSSLP4. Control security incidents

Overview SFSSLP4. Control security incidents Overview This NOS is aimed at security and loss prevention service providers and sets out the skills, knowledge and understanding for you to deal with security emergencies, threats and potential breaches

More information

Contract Monitoring Officer (Indicative) PROPERTY AND ASSET MANAGEMENT Competency Level Pay Range / Scale Purpose

Contract Monitoring Officer (Indicative) PROPERTY AND ASSET MANAGEMENT Competency Level Pay Range / Scale Purpose Role Title Job Family Contract Monitoring Officer (Indicative) PROPERTY AND ASSET MANAGEMENT Competency Level Pay Range / Scale Purpose PO4 To manage the metrics and outputs of the Council s AMEY and PFI

More information

ASTH401 Ensure compliance with legal, regulatory, ethical and social requirements

ASTH401 Ensure compliance with legal, regulatory, ethical and social requirements Ensure compliance with legal, regulatory, ethical and social Overview Organisations must show that they act responsibly in relation to their staff, customers, investors and the communities in which they

More information

Position Description

Position Description Position Description Job Title: Reporting To: - Remuneration level: Works Supervisor Works Manager Negotiable depending on experience and qualifications Purpose of the position 1. To assist the Works Manager

More information

Phoenix Energy Holdings Gas Ltd Health & Safety Policy

Phoenix Energy Holdings Gas Ltd Health & Safety Policy Phoenix Energy Holdings Gas Ltd Health & Safety Policy July 2017 Phoenix Energy Holdings Ltd Health & Safety Policy July 2017 Contents 1.0 Introduction 2.0 Purpose 3.0 Scope 4.0 References 5.0 Definitions

More information

Unit: CPC 420 De-commission services (Commissioning, Procurement and Contracting)

Unit: CPC 420 De-commission services (Commissioning, Procurement and Contracting) Unit: CPC 420 De-commission services (Commissioning, Procurement and Contracting) Key Purpose The key purpose identified for those working in commissioning, procurement and contracting is to: Specify,

More information

Job Description. advise and support the Joint Venture Manager in successfully delivering the Bridge Homes programme;

Job Description. advise and support the Joint Venture Manager in successfully delivering the Bridge Homes programme; Job Description Job Title: Bridge Homes Project Manager Grade: Grade 11 Section: Investment Reports to: Joint Venture Manager Responsible for: The Job Is to: be responsible for the development, delivery

More information

COSVR257 HL4M 04 Commission lightning conductor installation systems

COSVR257 HL4M 04 Commission lightning conductor installation systems Overview This standard is about 1 interpreting information 2 adopting safe and healthy working practices 3 selecting materials, components and equipment 4 preparing and commissioning lightning conductor

More information

COSBEDMC01 - SQA Unit Code FM6R 04 Prepare development team programmes and working methods in built environment design management

COSBEDMC01 - SQA Unit Code FM6R 04 Prepare development team programmes and working methods in built environment design management Prepare development team programmes and working methods in built environment design management Overview This unit is concerned with preparing to undertake a design for a project. Candidates must know about

More information

Head of HSE. Group Services, Risk

Head of HSE. Group Services, Risk Policy Title: Document Owner: Owning Department: Classification: Environmental Sustainability Policy Head of HSE Group Services, Risk KCOM Group Internal use only Business Units affected by this Policy:

More information

SCDCPC422 Manage the tendering process to achieve priority outcomes

SCDCPC422 Manage the tendering process to achieve priority outcomes Overview This standard covers the process of managing the tendering process up to the point of making recommendations to award a contract. It involves planning a selection process, inviting and evaluating

More information

Level 3 NVQ Diploma in Construction Contracting Operations

Level 3 NVQ Diploma in Construction Contracting Operations Level 3 NVQ Diploma in Construction Contracting Operations Qualification Specification ProQual 2016 Contents Page Introduction 3 Qualification profile 3 Qualification Structure 4 Centre requirements 12

More information

F7G2 04 Maintain working relationships and oversee work activities. This Unit comprises of the following National Occupational Standards (NOS)

F7G2 04 Maintain working relationships and oversee work activities. This Unit comprises of the following National Occupational Standards (NOS) F7G2 04 Maintain working relationships and oversee work activities This Unit comprises of the following National Occupational Standards (NOS) SUMMES3 (SQA Unit Code - F7G2 04) Maintain effective working

More information

EUSNCO309 - SQA Unit Code HG38 04 Monitor the installation process for Network Construction Operations

EUSNCO309 - SQA Unit Code HG38 04 Monitor the installation process for Network Construction Operations Monitor the installation process for Network Construction Operations Overview This unit is designed for the candidate to demonstrate the effectiveness of the installation and construction process by monitoring

More information

SFJ EFSM15 Develop teams and individuals to enhance work based performance

SFJ EFSM15 Develop teams and individuals to enhance work based performance Develop teams and individuals to enhance work based performance Overview This standard is about developing your team's skills and knowledge to ensure the best possible results at work. It covers identifying

More information

Level 3 NVQ Diploma in Controlling Lifting Operations Supervising Lifts (Construction)

Level 3 NVQ Diploma in Controlling Lifting Operations Supervising Lifts (Construction) Level 3 NVQ Diploma in Controlling Lifting Operations Supervising Lifts (Construction) Qualification Specification ProQual 2017 1 Contents Page Introduction 3 Qualification profile 3 Qualification structure

More information

Environmental Roles and Responsibilities

Environmental Roles and Responsibilities Environmental Roles and Responsibilities All members of staff have a responsibility for their actions and the following impact on the companies identified environmental risks. All staff have responsibilities

More information

Position Description

Position Description Position Description Position: Reports To: Direct Reports: Chief Executive Officer IFL- 247 Board of Directors Corporate Services Manager Health Services Manager Senior Medical Officer Purpose of the Role

More information

Overview SFJCCAD2. Promote business continuity management

Overview SFJCCAD2. Promote business continuity management Overview This standard is about providing advice and assistance on business continuity management, including general advice for the business and voluntary sectors, and specific advice and assistance to

More information

COSCCOMO14 (SQA Unit Code - HA3F 04) Evaluate work methods and programme in construction contracting operations management

COSCCOMO14 (SQA Unit Code - HA3F 04) Evaluate work methods and programme in construction contracting operations management Overview This unit is about assessing project information and selecting methods which meet technical project criteria. It is also about analysing the sequential programming of activities and confirming

More information

COSCCOO08 Prepare estimates, bids and tenders in construction

COSCCOO08 Prepare estimates, bids and tenders in construction Overview This unit is about the evaluation of tender enquiries, identifying and making necessary measurements and producing estimates by costing resources. You will need to check and summarise tender details

More information

CFAMN2 Set and monitor financial targets for your business

CFAMN2 Set and monitor financial targets for your business Overview If you want to run a successful business you need to keep track of the money you use, save and spend. Setting financial targets and monitoring how well your business does against them will help

More information

NHS ISLE OF WIGHT CLINICAL COMMISSIONING GROUP BUSINESS CONTINUITY POLICY

NHS ISLE OF WIGHT CLINICAL COMMISSIONING GROUP BUSINESS CONTINUITY POLICY NHS ISLE OF WIGHT CLINICAL COMMISSIONING GROUP BUSINESS CONTINUITY POLICY 1 AUTHOR/ APPROVAL DETAILS Document Author Written By: Phil Hartwell Authorised Signature Authorised By: Helen Shields Date: 06

More information

SEMILSM17 Allocate work to teams and individuals

SEMILSM17 Allocate work to teams and individuals Overview This unit identifies the competencies you need to ensure the efficient and effective use of personnel. It includes use of personnel management and work authorisation techniques. It applies to

More information

COSVR13 Set up and use circular saws

COSVR13 Set up and use circular saws Overview This standard is about 1 interpreting information 2 adopting safe and healthy working practices 3 selecting materials, components and equipment 4 setting up fixed and/or transportable machinery

More information

Qualification Specification 601/3688/1 icq Level 3 Diploma in Management (RQF)

Qualification Specification 601/3688/1 icq Level 3 Diploma in Management (RQF) Qualification Specification 601/3688/1 icq Level 3 Diploma in Management (RQF) Qualification Details Title : icq Level 3 Diploma in Management (RQF) Awarding Organisation : ican Qualifications Limited

More information

Overview IMICA01. Contribute to Housekeeping in Motor Vehicle Environments. Contribute to Housekeeping in Motor Vehicle Environments

Overview IMICA01. Contribute to Housekeeping in Motor Vehicle Environments. Contribute to Housekeeping in Motor Vehicle Environments IMICA01 Contribute to Housekeeping in Motor Vehicle Environments Overview This NOS is about the routine maintenance of the workplace, carrying out basic, non-specialist checks of relevant workplace equipment,

More information

Senior Academy Business Manager

Senior Academy Business Manager POST: Senior Academy Business Manager GRADE: Grade 16 Full Time All Year Round (holidays to be taken in agreement with Headteachers) RESPONSIBLE FOR: Administrative Officers, Finance Officers and Premises

More information

SFJ EFSM5 Plan implementation of organisational strategy to meet objectives

SFJ EFSM5 Plan implementation of organisational strategy to meet objectives Plan implementation of organisational strategy to meet objectives Overview This standard relates to preparing and producing an implementation plan to achieve organisational strategy. It includes developing

More information

Legal Administration. National Occupational Standards April 2010

Legal Administration. National Occupational Standards April 2010 Legal Administration National Occupational Standards April 2010 Skills CFA 6 Graphite Square, Vauxhall Walk, London SE11 5EE T: 0207 0919620 F: 0207 0917340 Info@skillscfa.org www.skillscfa.org 2012 Skills

More information

The Sector Skills Council for the Financial Services Industry. National Occupational Standards. Risk Management for the Financial Sector

The Sector Skills Council for the Financial Services Industry. National Occupational Standards. Risk Management for the Financial Sector The Sector Skills Council for the Financial Services Industry National Occupational Standards Risk Management for the Financial Sector Final version approved April 2009 IMPORTANT NOTES These National Occupational

More information

O29NEM12 Co-ordination and management of the assessment process and initial Environmental Statement compilation

O29NEM12 Co-ordination and management of the assessment process and initial Environmental Statement compilation Overview This standard is one of three related standards that together cover Environmental Impact Assessment for planners. They describe the requirements to plan and conduct an Environmental Impact Assessment

More information

ASTHSS1 - SQA Unit Code F7EG 04 Make sure your own actions reduce risks to health and safety

ASTHSS1 - SQA Unit Code F7EG 04 Make sure your own actions reduce risks to health and safety Make sure your own actions reduce risks to health and safety Overview This unit is for everyone at work (whether paid, unpaid, full or part-time). It is about having an appreciation of significant risks

More information

Development Manager. City Projects & Property. Development & Strategy

Development Manager. City Projects & Property. Development & Strategy POSITION DESCRIPTION 1. POSITION DETAILS Position Title: Division: Unit: Management Level: Development Manager City Projects & Property Development & Strategy M4 2. ORGANISATIONAL RELATIONSHIPS Position

More information

SEMBIT SQA Unit Code F9HL 04 Applying flow process analysis

SEMBIT SQA Unit Code F9HL 04 Applying flow process analysis Overview This unit covers the competences required to apply flow process analysis. It involves applying the principles and procedures of flow process analysis, within a given work area, to produce a flow

More information

QUALIFICATION HANDBOOK

QUALIFICATION HANDBOOK QUALIFICATION HANDBOOK Level 6 NVQ Diploma in Construction Site Management (Construction) (6578) November 2013 Version 1.0 Qualification at a glance Subject area City & Guilds number 6578 Age group approved

More information

Group Accountant (Children s Services)

Group Accountant (Children s Services) Grade: 54,000 Group Accountant (Children s Services) Section: Division: Department: Reports to: As Required Finance Chief Executive Group Manager (Services) Purpose of the Job You are employed to provide

More information

[Unique Reference Number] Achieve effective working relationships with colleagues in bus/coach engineering and maintenance

[Unique Reference Number] Achieve effective working relationships with colleagues in bus/coach engineering and maintenance Achieve effective working relationships with colleagues in bus/coach engineering and maintenance Overview This unit is about achieving effective positive working relationships with your colleagues and

More information

COSCCO015 (SQA Unit Code - HA46 04) Recommend and monitor supplies of plant and equipment in construction

COSCCO015 (SQA Unit Code - HA46 04) Recommend and monitor supplies of plant and equipment in construction Overview This unit is about identifying plant and equipment requirements, potential suppliers, estimating costs, implementing orders, identifying and rectifying problems and liaising with suppliers. You

More information

FSPBCRM10 - SQA Unit Code H68B 04 Work with customers to assess and enhance the quality of service provided within a financial services environment

FSPBCRM10 - SQA Unit Code H68B 04 Work with customers to assess and enhance the quality of service provided within a financial services environment Work with customers to assess and enhance the quality of service provided within a financial services environment Overview This unit is about working with customers and your colleagues to make or recommend

More information

Bowmer. & Kirkland. Kirkland. & Accommodation. Health & Safety Policy.

Bowmer. & Kirkland. Kirkland. & Accommodation. Health & Safety Policy. Bowmer Kirkland & Kirkland & Accommodation Health & Safety Policy December 2013 www.bandk.co.uk Index Policy Statement Page 3 Interaction of Health and Safety Responsibilities Page 5 Organisation Page

More information

SKSMSP2 - SQA Unit Code H9E3 04 Contribute to achieving product quality

SKSMSP2 - SQA Unit Code H9E3 04 Contribute to achieving product quality Overview This standard is for those who monitor the quality of their own production activities and ensure products continue to meet specifications during production. The job role may involve: 1. Inspecting

More information

Supply Chain Specialist

Supply Chain Specialist Role Title Job Family Supply Chain Specialist Supply Chain Competency Level Pay Range / Scale Principal Officer/Manager PO6 Purpose To support the council s category management approach to procurement

More information

Contribute towards school decisions regarding the development and improvement of the premises.

Contribute towards school decisions regarding the development and improvement of the premises. JOB TITLE: Facilities Manager SCALE: Kent Range 10 RESPONSIBILITY TO: Business Development Manager RESPONSIBILITIES AND DUTIES To assist the Business Development Manager (BDM) in all aspects of The Beacon

More information

M&LE12 Manage knowledge in your area of responsibility

M&LE12 Manage knowledge in your area of responsibility Overview What this unit is about This unit is about managing knowledge salient information and expertise in your area of responsibility in line with agreed standards and processes. It involves being clear

More information

Business Continuity Management. National Occupational Standards December 2013

Business Continuity Management. National Occupational Standards December 2013 Business Continuity Management National Occupational Standards December 2013 Skills CFA 6 Graphite Square, Vauxhall Walk, London SE11 5EE T: 0207 0919620 F: 0207 0917340 E: info@skillscfa.org www.skillscfa.org

More information

Palmerston North City Council Job Profile

Palmerston North City Council Job Profile Position Title Reporting to Unit Civil Works Supervisor Operations Manager City Enterprises Date created December 2015 Values We are committed to fostering an environment where our values of Trust, Worth,

More information

CFABAA626(SQA Unit Code-FD9Y 04) V2 Plan how to manage and improve own performance in a business environment

CFABAA626(SQA Unit Code-FD9Y 04) V2 Plan how to manage and improve own performance in a business environment Plan how to manage and improve own performance in a business Overview This standard is about planning to take forward agreements to manage and improve own performance in a business. It includes negotiating

More information

HEALTH AND SAFETY POLICY

HEALTH AND SAFETY POLICY HEALTH AND SAFETY POLICY April 2018 NERC H&S Policy Page 1 of 8 April 2018 Part 1: Statement of Intent Natural Environment Research Centre (NERC) UKRI through the NERC Executive Chair, management and staff

More information

COSCCOMO09 (SQA Unit Code - HA3C 04) Specify and control production documents in construction contracting operations management

COSCCOMO09 (SQA Unit Code - HA3C 04) Specify and control production documents in construction contracting operations management construction contracting Overview This unit is about developing a document production programme. It is also about preparing a specification document consistent with the current design; the identification

More information

Cskills Awards L6 NVQ Diploma in Construction Site Management Building and Civil Engineering

Cskills Awards L6 NVQ Diploma in Construction Site Management Building and Civil Engineering Cskills Awards L6 NVQ Diploma in Construction Site Management Building and Civil Engineering Qualification Code: QUA884 QRN Ref: 600/3652/7 Version: QUA884/20140201/1 https://awardsonline.cskills.org/(s(jpgylwygqj3et0jg1pxmow45))/authorised/documentation/printfullcompetencequalification.aspx?t=csr&q=239795

More information

COSVR186 - SQA Unit Code FW1A 04 Remove existing wall cladding systems

COSVR186 - SQA Unit Code FW1A 04 Remove existing wall cladding systems Overview This standard is about 1 interpreting information 2 adopting safe and healthy working practices 3 selecting materials, components and equipment 4 removing existing proprietary wall cladding systems

More information

National Occupational Standards for the Production of Energy Performance Certificates, and Recommendations Reports

National Occupational Standards for the Production of Energy Performance Certificates, and Recommendations Reports National Occupational Standards for the Production of Energy Performance Certificates, and Recommendations Reports You must be able to demonstrate that you meet 100% of the NOS to become an energy assessor.

More information

COSVR210 Develop and maintain good working relationships

COSVR210 Develop and maintain good working relationships Overview This standard, in the context of your occupation and work environment, is about 1 interpreting information 2 adopting safe and healthy working practices 3 working with, informing and supporting

More information

Specification. Edexcel NVQ/competencebased qualifications. Edexcel Level 3 NVQ Diploma in Hospitality Supervision and Leadership (QCF)

Specification. Edexcel NVQ/competencebased qualifications. Edexcel Level 3 NVQ Diploma in Hospitality Supervision and Leadership (QCF) Specification Edexcel NVQ/competencebased qualifications Edexcel Level 3 NVQ Diploma in Hospitality Supervision and Leadership (QCF) For first registration April 2011 Unit 1: Unit code: Unit number: Set

More information

COGPEM26 - SQA Unit Code FP3J 04 Hand over process engineering plant and equipment

COGPEM26 - SQA Unit Code FP3J 04 Hand over process engineering plant and equipment Hand over process engineering plant and equipment Overview This unit is about your competence in completing safe and effective hand over of plant and equipment. It includes the hand over to others and

More information

SFHGEN23 - SQA Code HD45 04 Monitor your own work practices

SFHGEN23 - SQA Code HD45 04 Monitor your own work practices Overview This standard is about carrying out a review of your own practice. It involves monitoring and evaluating the quality of your work activities and outcomes and taking appropriate actions to support

More information

LSIILARH6 Develop organisational structures and systems to support volunteering

LSIILARH6 Develop organisational structures and systems to support volunteering Develop organisational structures and systems to support volunteering Overview Organisations need structures and systems that properly integrate and support the work of volunteers. In particular, these

More information

ENVIRONMENTAL MANUAL Page 1 of 7. Section 4 - General Requirements of System (4.1)

ENVIRONMENTAL MANUAL Page 1 of 7. Section 4 - General Requirements of System (4.1) ENVIRONMENTAL MANUAL Page 1 of 7 Contents Section 1 - Introduction Section 2 - Company Details Section 3 - Scope of System Section 4 - General Requirements of System (4.1) 4.1 Interaction of the EMS 4.2

More information

Overview COGESA2.12. Analyse and identify aggregated hazards and risks for explosives

Overview COGESA2.12. Analyse and identify aggregated hazards and risks for explosives Overview This standard covers the competences you need to analyse and identify aggregated hazards and risks for explosives in accordance with approved procedures and practices. You will be required to

More information

ECIMPSM13 - SQA Unit Code FP7E 04 Test the performance and condition of mechanical plant and equipment

ECIMPSM13 - SQA Unit Code FP7E 04 Test the performance and condition of mechanical plant and equipment Test the performance and condition of mechanical plant and equipment Overview This standard is about testing the performance and condition of engineering construction mechanical plant and equipment. You

More information

University of Birmingham

University of Birmingham University of Birmingham Health and Safety Policy Manager responsible for review: Facilities Manager Date of last review and update: April 2015 Approved by: H&S committee 2015 Next scheduled review date:

More information