Carpenters and Joiners Training Center 740 Olive Street, St. Paul, MN

Transcription

1 September Labor Day 4:30-9:30 Pro 10 10hr(9/4-9/5) :30-8:30 ICRA 24 24hr (9/10-9/13, 9/15) 4:30-8:30 PITO Rough Terrain 8hr (9/12-9/13) 4:30-8:30 Construction Fall Protection 8hr (9/12-9/ :30-8:30 ICRA Refresher 8hr(9/24-9/25) 4:30-8:30 Math for the Trades 8hr (9/26-9/27) 4:30-6:30 Silica Awareness 2hr 4:30-8:30 Aerial Lift 8hr (9/26-9/27) 4:30-8:30 Armstrong Wall & Ceilings 12hr( 9/25-9/27) Notes: Requirements: Union card, Hard Hat, Safety Glasses and Work Boots

2 October :30-9:30 OSHA 30 30hr(10/2-10/4, 10/9-10/11) 4:30-8:30 Stepping Up to Foreman 8hr(10/3-10/4) OSHA 30 Continued (10/2-10/4, 10/9-10/11) 4:30-8:30 ICRA 24 24hr(10/8-10/11, & 10/13) 4:30-8:30 Tradeshow Install & Dismanteling 24hr(10/9-10/11 & 10/18) Tradeshow Install & Dismanteling 24hr CONTINUED (10/9-10/11 & 10/18) 4:30-8:30 Door Hardware 24hr(10/16-10/25) 4:30-9:30 Pro 10 10hr (10/17-10/18) Door Hardware 24hr CONTINUED (10/16-10/25) 4:30-8:30 Hazard Comm. & Chem Safety 8 hr(10/24-10/25) 4:30-8:30 First Aid/CPR/AED 8hr(10/24-10/25) :30-8:30 Aerial Lift 8hr (10/31-11/1) 4:30-8:30 PITO Industrial 8hr (40/31-11/1) 4:30-8:30 Hilti PLT 300 Layout 8hr(10/31-11/1) Notes: Requirements: Union Card, Hard Hat, Safety Glasses and Work Boots. All classes are taught in English unless noted. Classes will be cancelled if the minimum requirement is not met

3 November Aerial Lift 8hr Cont.(10/31-11/1) PITO Industrial 8hr Cont. (40/31-11/1) Hilti PLT 300 Layout 8hr Cont. (10/31-11/1) :30-8:30 ICRA 24 24hr(11/5-11/8, 11/10) 4:30-8:30 Tradeshow Install & Dismanteling 24hr(11/6-11/8, 11/13-11/15) 4:30-8:30 Solid Surface 12hr(11/6-11/8) 4:30-9:30 Pro 10 10hr(11/7-11/8) Tradeshow Install & Dismanteling 24hr CONTINUED (11/6-11/8, 11/13-11/15) 4:30-8:30 Construction Math/Radius 8hr(11/14-11/15) 4:30-8:30 Stepping Up to Foreman 8hr(11/14-11/15) 4:30-9:30 OSHA 10 10hr(11/14-11/15) Thanksgiving Day :30-8:30 Armstrong Wall & Ceiling 12hr(11/27-11/19) 4:30-8:30 First Aid/CPR/AED 8hr(11/28-11/29) 4:30-8:30 PITO Industrial 8hr(11/28-11/19) Notes: Requirements: Union Card, Hard hat, safety glasses and work boots. All classes are taught in English unless noted. Classes will be cancelled if the minimum attendance requirement is not met.

4 December :30-8:30 ICRA 24 24hr(12/03-12/06, 12/8) 4:30-8:30 Math for the Trades 8hr(12/3-12/6) 4:30-8:30 Tradeshow Install & Dismanteling 24hr(12/4-12/6, 12/11-12/13) Tradeshow Install & Dismanteling 24hr CONTINUED (12/4-12/6, 12/11-12/13) 4:30-8:30 Stepping Up to Foreman 8hr(12/12-12/13) 4:30-9:30 OSHA 10 10hr(12/12-12/13) :30-8:30 PITO Industrial 8hr(12/19-12/20) 4:30-8:30 First Aid/CPR/AED 8hr (12/19-12/20) 4:30-8:30 Blueprint Reading Basics 8hr(12/19-12/20) Christmas Day Notes: Requirements: Union Card, Hard hat, safety glasses and work boots. All classes are taught in English unless noted. Classes will be cancelled if the minimum attendance requirement is not met.

5 TCO Skill Enhancement Classes Armstrong Wall and Ceiling System: 12 hour course. This course works with quick stick soffit, radia domes, sheetrock grid and light coves. Prerequist: None 2018 Course offered: Feb 20-22, May 22-24, July 24-26, Sept 25-27, Nov Advanced Metal Stud Framing: 24 hour course. This course covers radius, sloped, light cove and more intricate framing techniques. Also includes an introduction to track bender. Prerequist: Minimum 3 year apprentice 2018 Course offered: Apr 23-26, 30-May1 Aerial Lift 8 hour course. This course covers scissor and boom lift qualifications, classroom and hands on instruction. Prerequist: None 2018 Course offered: Feb 21-22, May 9-10, Aug 8-9, Sept 26-27, Oct 31-Nov 1 Blueprint Reading-Basic 8 hour course. Introduction to Blueprints and how to navigate through them. Plus basic layout techniques and how to transfer information from print to shop floor 2018 Course offered: Feb 27-28, May 2-3, July 18-19, Dec American Red Cross CPR/First Aid/AED 8 hour course. This course provides First Aid/CPR/AED certification Expiration: 2 years 2018 Course offered: Jan 10-11, Feb 14-15, March 6-7, April 4-5, May 2-3, June 6-7, July 11-12, Oct 24-25, Nov 28-29, Dec Blueprint Reading-Advanced 8 hour course. A more in depth look at prints, how to do advanced layout, possible intro to electronic print reading, and how to transfer information to shop floor. Prerequisit: Some experience with blueprints 2018 Course offered: upon request Confined Space Construction Math/Radius 16 hour course. This course covers rules, regulations, 8 hour course. This course covers radius math, how to and how to identify confined space, hazards, layout radius without a center point. Also covers elliptical specifically permit required and octagon layout. Prerequist: Math for the Trades 2018 Course offered: upon request 2018 Course offered: Jan 31-Feb 1, Aug 1-2, Nov Construction Fall Protection 8 hour course. This course covers how to recognize and properly address fall hazards in our industry Course offered: Jan 31-Feb 1, March 14-15, June 13-14, Sept Door Hardware: 24 hour course. This course covers basic hardware installation 2018 Course offered: Jan 9-18, Feb 6-15, April 16-24, Oct Hazard Communication and Chemical Safety 8 hour course. This course replaces MSDS (Material Safety Data Sheets) and deals with the new GHS (Global Harmonized System) dealing with chemical safey data. HazMat hour course. AKA Hazwoper. This course covers how to deal with contaminates in the soil, structure of soil and equipment to wear and how to protect Course offered: March 7-8, Aug 15-16, Oct Course offered: upon request

6 HazMat Refresher 8 hour course. AKA Hazwoper Refresher. Review/ Refreshes HazMat 40 Prerequisit: HazMat 40 Expiration: refresh annually TCO Skill Enhancement Classes Hillti PLT 300 Layout: 8 hour course. Digital blueprint reading and layout procedures Course offered: upon request 2018 Course offered: Jan 31-Feb 1, April 25-26, Aug 29-30, Oct 31-Nov 1 ICRA Best Practice in Health Care Construction 24 hour course. This course covers infection control risk assessment, health care awareness protocol and how to minimize risk in health care facilities. Practical application of these protocols Course offered: Jan 15-20, Feb 5-10, March 12-17, April 16-21, May 7-12, June 11-16, July 16-21, Aug 6-11, Sept 10-15, Oct 8-13, Nov 5-10, Dec 3-8 ICRA Best Practice in Health Care Construction Refresher 8 hour course. This course refreshes/ reviews the 24 hour ICRA course. Prerequisit: ICRA Best Practice in Health Care Construction 2018 Course offered: March 28-29, May 23-24, June 27-28, Sept i-pad Basics and Intro to Bluebeam 8 hour course. This course introduces you to the i- pad and its basic functions. The second night will give you a basic overview of the Bluebeam application, screen design, basic tools and markup features. Lathing-Basic 12 hour course. This course covers black iron, suspended ceiling, tying metal lath, installation of lathing beads, lathing exterior walls for stucco Course offered: March 28-29, June 20-21, Aug Course offered: upon request Math for the Trades 8 hour course. This course covers basic math, decimals, fractions, conversion area and volume Course offered: Jan 10-11, April 4-5, July 11-12, Sept 26-27, Dec 5-6 MSHA 24 hour course. This course covers OSHA regulations for mine safety. Expiration: 1 year, then refresh annually 2018 Course offered: upon request MSHA Refresher 8 hour course. This course reviews/refreshes OSHA regulations for mine safety. Prerequisit: MSHA 24 Expiration: refresh annually OSHA hour course. This course covers a basic OSHA overview, rights and responsibilities of employer and employee 2018 Course offered: upon request 2018 Course offered: Jan 24-25, Feb 27-28, May 9-10, June 27-28, Aug 1-2, Nov 14-15, Dec OSHA hour course. This course covers amore in depth examination of OSHA standards, rights and responsibilities of employer and employee PITO Industrial 8 hour course. Forklift training, classroom and hands on 2018 Course offered: Mar 13-22, June 5-14, Oct Course offered: Jan 24-25, Feb 14-15, May 23-24, Aug 29-30, Oct 31-Nov 1, Nov 28-29, Dec 19-20

7 TCO Skill Enhancement Classes PITO Rough Terrain 8 hour course. Rough Terrain forklift (Lull) training, classroom hands on 2018 Course offered: March 21-22, May 16-17, June 20-21, July 25-26, Aug 15-16, Sept PRO hour course. Professionalism, communication, diversity, Union history, safety, and "Big Picture" Course offered: Jan 10-11, Feb 13-15, March 7-8, April 11-12, May 2-3, July, 25-26, Sept 4-5, Oct 17-18, Rigging 40 hour course. This course covers rules and regulations related to safe rigging practices; classroom and hands on. Rigging certifcation Rigging Refresher 16 hour course. This course refreshes/reviews 40 hour Rigging Course Prerequisit: Rigging 40 hr Course offered: See Shosten Training Center 2018 Course offered: See Shosten Training Center Scaffold SHOSTEN TRAINING CENTER: Scaffold 40 SHOSTEN TRAINING CENTER: 1295 Hunting Valley Road, St. Paul Hunting Valley Road, St. Paul Phone: Phone: hour course. This course covers the basic concepts 8 hour course. This course refreshes/reviews scaffold 40 to build an OSHA compliant scaffold hour class Prerequisit: Scaffold Course offered: See Shosten Training Center 2018 Course offered: See Shosten Training Center Silica Awareness 2 hours course. This course covers understanding the hazards of silica, with an overview of OSHA Construction silica final rule Course offered: Jan 29, Feb 26, Mar 26, April 30, May 21, June 25, July 30, Aug 27, Sept 24 Solid Surface 12 hour course. This course covers epoxy, joining solid surfaces and proper surface finishing. Prerequisit: Minimum 3rd year apprentice Stepping Up to Foreman 8 hour course. This course uses the UBC Stepping up to Foreman book, covers job site issues, organization, preparation and the "big picture" viewpoint of a job Course offered: Jan 17-18, March 7-8, May 16-17, June 27-28, Aug 22-23, Oct 3-4, Nov 14-15, Dec Total Station I and II 8 hour course. Covers a combination of Total Station I and II. It will begin with a review of the fundamental workings of the total station and how building quadrants are established. The second day will cover the capabilities and functions of the total station layout equipment Course offered: March 20-22, Aug 21-23, Nov Course offered: upon request Trade Show Installation & Dismantling 24 hr course. This course focuses on procedures and safety precautions for trade shows and special events Course offered: Oct 9-18, Nov 6-15, Dec 4-13