QCF Unit and Assessment Specification

Transcription

1 QCF Unit and Assessment Specification Unit title Ofqual Unit code Roll On Roll Off Operations on Domestic Vessels H/507/3459 SQA Unit code H9HW 60 SSC Ref MSA Unit 136

2 History of changes Publication date: August 2015 Version: 01 Version number Date Description Authorised by Scottish Qualifications Authority 2015 This publication may be reproduced in whole or in part for educational purposes provided that no profit is derived from reproduction and that, if reproduced in part, the source is acknowledged.

3 QCF Unit specification Title Roll on Roll off Operations on Domestic Vessels Level 3 Credit value 2 Learning Outcomes Assessment Criteria The learner will: 1 Know the regulatory framework within which Roll On Roll Off (Ro-Ro) operations are carried out. The learner can: 1.1 Explain the content of Maritime and Coastguard Agency (MCA) M notices covering Roll On Roll Off (Ro-Ro) 1.2 Explain the requirements of Safety Management Systems as they relate to Ro-Ro 1.3 Explain the sections of the Maritime and Coastguard Agency (MCA) Code of Safe Working Practices for Merchant Seamen that relate to Ro-Ro 1.4 Explain the content of the MCA Code of Ro-Ro Ships Stowage and Securing of Vehicles. 1.5 Explain the content of Cargo Securing Manuals. 2 Understand the specific stability considerations applying to Ro-Ro 2.1 Specify the stability topics contained in a Ro-Ro ship s stability book. 2.2 Explain the effects on stability during and after loading and discharging of cargo. 2.3 Explain the effect of free surface in fuel and water tanks on stability at all stages of loading and discharging. 2.4 Explain the effect on stability of free surface water on vehicle decks. 2.5 Explain the effect on stability of point and axle weight loading on vehicle decks and ramps. 2.6 Explain the stability calculations which must be completed before sailing. 2.7 Explain the effect of flooding and damage stability factors. H9HW 60, Roll on Roll off Operations on Domestic Vessels (QCF Level 3) 1

4 Learning Outcomes The learner will: 3 Know the systems for opening and closing bow and stern doors, other hull openings, mezzanine decks, and vehicle ramps. Assessment Criteria The learner can: 3.1 Explain how to operate bow and stern doors, other hull openings, mezzanine decks, and vehicle ramps. 3.2 Explain the checks to be carried out on watertight seals and securing devices. 3.3 Describe the visual and audible alarms when bow and stern doors, other hull openings, mezzanine decks, and vehicle ramps are opened or closed, raised or lowered. 4 Know how to control vehicle deck 4.1 Explain how to plan the loading and discharging of vehicles and foot passengers including: briefing crew members on the intended operation checking vehicles presented for shipment are suitable for carriage, including those carrying dangerous goods and livestock separation of vehicles in different categories distribution of vehicles on vehicle decks taking into account vehicle categories, weights, stability, trim and draft maintaining adequate spacing between vehicles to allow passenger and crew access separation of foot passengers and vehicles when both use the same ramp 4.2 Explain safety procedures to be followed for vehicle deck 4.3 Explain the audible and visual alarms in use during vehicle deck 4.4 Explain the requirements and procedures for counting passengers. 4.5 Explain the personal protective equipment which must be worn by crew engaged in vehicle deck H9HW 60, Roll on Roll off Operations on Domestic Vessels (QCF Level 3) 2

5 Learning Outcomes The learner will: Assessment Criteria The learner can: 4.6 Explain how to maintain effective communications and give directions to crew members throughout the operation. 4.7 Explain the need for crew members to be able to give clear directions and instructions to vehicles and passengers. 4.8 Explain the reports and communications required between the vehicle deck, bridge, other departments, and passenger decks. 5 Know the requirements for the carriage of dangerous goods. 5.1 Explain the content of the International Maritime Dangerous Goods Code (IMDG Code). 5.2 Explain the purpose of a Document of Compliance for the Carriage of Dangerous Goods on a vessel. 5.3 Explain how to implement the provisions of the IMDG Code. 5.4 Explain where to obtain further advice on dangerous goods presented for shipment. 5.5 Explain which classes of dangerous goods are not permitted to be carried on board passenger vessels. 5.6 Explain emergency procedures to follow in the event of any emergency arising involving dangerous goods. 6 Know how to secure vehicles. 6.1 Explain the different securing methods available. 6.2 Explain the different securing points which may be found on vehicles. 6.3 Explain the different securing points and devices which may be found on a vessel. H9HW 60, Roll on Roll off Operations on Domestic Vessels (QCF Level 3) 3

6 Learning Outcomes The learner will: Assessment Criteria The learner can: 6.4 Explain how different items of equipment are used to secure a vehicle. 6.5 Explain how a vehicle s own fittings may be used to assist in securing the vehicle. 6.6 Explain why only securing equipment maintained in accordance with specified procedures should be used. 6.7 Explain how to assess the number and level of vehicle securing devices to be used taking account of forecast sea and weather conditions, and vessel condition and limitations. 7 Know how to control vehicle deck atmosphere. 7.1 Explain the requirements for vehicle deck ventilation. 7.2 Explain the operation of ventilation machinery. 7.3 Explain the different levels of ventilation which may be required during loading and discharging, and on passage. 7.4 Explain how the atmosphere can be tested. H9HW 60, Roll on Roll off Operations on Domestic Vessels (QCF Level 3) 4

7 Additional information about the Unit Unit purpose and aim(s) The aim of the Unit is to provide the knowledge underpinning proficiency for controlling Ro- Ro operations on domestic vessels, including the requirements for a BML Ro-Ro Operations Endorsement. This Unit is designed for study by those working towards meeting the requirements for a Boatmaster Licence (BML) Ro-Ro Operations Endorsement. Unit expiry date 31 March 2020 Details of the relationship between the Unit and relevant national occupational standards (if appropriate) MSA Maritime NOS 2012: A01, B14, B35 Details of the relationship between the Unit and other standards or curricula (if appropriate) MCA syllabus for the BML Ro-Ro Operations Endorsement Assessment requirements specified by a sector or regulatory body (if appropriate) Unit to be assessed in accordance with the Maritime Skills Alliance Assessment Strategy. Endorsement of the Unit by a sector or other appropriate body (if required) Maritime Skills Alliance Maritime and Coastguard Agency Location of the Unit within the subject/sector classification system 4.3 Transportation Operations and Maintenance Name of the organisation submitting the Unit SQA, for the Maritime Skills Alliance Availability for use Shared H9HW 60, Roll on Roll off Operations on Domestic Vessels (QCF Level 3) 5

8 Additional information about the Unit (cont) Availability for delivery 01 July 2015 Guided Learning Hours 20 H9HW 60, Roll on Roll off Operations on Domestic Vessels (QCF Level 3) 6

9 QCF Assessment specification Assessment (evidence) Requirements The following evidence is required to demonstrate that learners have the appropriate level of knowledge to underpin proficiency for controlling roll-on roll-off operations on domestic vessels. All Learning Outcomes and Assessment Criteria must be achieved. Written and/or recorded oral evidence produced either on or off-the-job is required for all of the Learning Outcomes (1 7). Guidance on Methods/Instruments of Assessment Assessment may be undertaken by a combination of the following methods: assignment; knowledge based testing; project work; presentation; practical demonstration; other, as agreed in consultation with the external verifier. H9HW 60, Roll on Roll off Operations on Domestic Vessels (QCF Level 3) 7