MINILOAD OVERVIEW FLO W

Transcription

1 MINILOAD OVERVIEW MINILOAD AND MATERIAL FLO W SYSTEMS

2 2.1 The basis crane for single deep storage of standard and similar measured totes up to 50 kg load. This stacker crane represents the solution for simple storage systems or as sorting device for flow rack systems. QUICKSTORE 3.1 The crane system is designed for high capacity and multiple deep rack systems and unit loads up to 250 kg. It can be equipped with multiple and different load handling devices of the type, to meet the different requirements of modern warehouses. QUICKSTORE 4.2 The crane type for fast storage systems equipped with two load handling devices with independent hoist drives is able to gain a throughput of up to 150 DC/hour. QUICKSTORE 3.2 QS type 2.1 The crane uses the advantages of the QS 3.1 type and can be equipped with multiple load handling devices, for an increase of throughput of up to 100%. QS type 4.2 QS type 3.1 QUICKSTORE 4.4 QUICKSTORE 2.2 The basis crane with extended abilities regarding the throughput! The crane is equipped with a second load handling device and thus gains a throughput plus of up to 40 % to the standard QS 2.1 High Speed crane type for totes and cartons around the Euro size. A throughput of 250 DC/hour and more is gained through the use of four load handling devices on two independent hoist drives. QS type 4.4 QS type 7 QUICKSTORE 7 The lifting beam device crane type is suitable for buffer systems in the production line or as commissioning sorter in the outgoing goods area, where the goods have to stay accessible. Lifting units, shuttle cars and mini sorter s. last page QS type 2.2 QS type 3.2

3 2.1 Length overall 2215 mm Aisle clearance 800 mm Weight at 6m/14m ca. 880 / 1140 kg Max. installation height 14 m Transfer time app. 2,5 s AMGEN - Whale (VI - NL) 9 x QS 2.1 with FG2 Hammesfahr (VI - MG) 2 x QS 2.1 with FG2 Delphi (VI - MG) 4 x QS 2.1 with FG2 FG2 (St./Al.), FG4, TTK, GFK Number of LHDs 1 Max. payload 50 kg FG2/4 TTK GFK LHD for single-deep storage/sorting with flip-technique, for totes and cartons (base: 400 x 600 mm) with flat, concave, clean bottom, payload 50 kg, take-over from static positions or roller-conveyors. Transfer time 2,5 s Simple telescopic-table, adapted to the respective task, payload max. 300 kg. Transfer time based on Euro tote 600 x 400 mm: 4 s LHD for single-deep sorting for totes and cartons (base: 400 x 600 mm), payload 50 kg, take-over from driven conveyors, take-over from driven conveyors or gravity-tracks. Transfer time 2,0 s

4 2.2 Length overall 2415 mm Aisle clearance 800 mm Weight at 6m/14m ca / 1340 kg Max. installation height 14 m TVH 1 (VI - NL) 4 x QS 2.2 with FG2 TVH 2 (VI - NL) 10 x QS 2.2 with FG2 Transfer time app. 2,5 s FG2 (St./Al.), FG4, TTK, GFK Number of LHDs 2 Max. payload 2 x 50 kg FG2/4 TTK GFK LHD for single-deep storage/sorting with flip-technique, for totes and cartons (base: 400 x 600 mm) with flat, concave, clean bottom, payload 50 kg, take-over from static positions or roller-conveyors. Transfer time 2,5 s Simple telescopic-table, adapted to the respective task, payload max. 300 kg. Transfer time based on Euro tote 600 x 400 mm: 4 s LHD for single-deep sorting for totes and cartons (base: 400 x 600 mm), payload 50 kg, take-over from driven conveyors, take-over from driven conveyors or gravity-tracks. Transfer time 2,0 s

5 3.1 Length overall 2580 / 3150 mm Aisle clearance 1450 mm Weight at 6m/14m (incl. load) ca / 1340 kg Max. installation height 6/14 m Transfer time double deep < 5 s Transfer time P/D / racking app. 2,5 / 4 s TDG, TTK, TFG, ZTK Number of LHDs 1 Max. payload 2 x 50 kg Kühne + Nagel (VI - MG) 5 x QS 3.2(1) with TDG Johnson Controls (VI - MG) 3 x QS 3.1 with TTK Stute Hamburg (VI - MG) 3 x QS 3.1 with TDG Schäflein (VI - MG) 3 x QS 3.1 with TDG TDG TTK TFG ZTK LHD for multiple-deep (up to 6 deep) storage (telescopic table with two parallel arranged beltconveyors) for standard-totes and cartons etc. with 400 mm width, payload 100 kg (2 x 50 kg or 4 x 25 kg etc.) Transfer time single deep: 4 s Transfer time double deep: 5 s Simple telescopic-table, adapted to the respective task, payload max. 300 kg. Transfer time based on Euro tote 600 x 400 mm: 4 s Table for the single deep inand out feed to static picking positions, payload per tote max. 50 kg. Transfer time to rack or P/D position: 4 s Transfer time to pick positions: 4-6 s Pulling technique table, adapted to the respective tray-size, payload max. 300 kg. Transfer time based on a try x 600 mm: 5 s

6 3.2 Length overall 3645 mm Aisle clearance 1450 mm Weight at 6m/14m (incl. load) ca / 2290 kg Max. installation height 14 m Transfer time double deep < 5 s Transfer time P/D / racking app. 2,5 / 4 s TDG, TTK, TFG, ZTK, VTK Number of LHDs 2 Max. payload 2 x 50 kg Kühne + Nagel (VI - MG) 5 x QS 3.2(1) with TDG Förch (VI - MG) 6 x QS 3.2 with TTK Bourjois Chanel (VI - NL) 3 x QS 3.2 mit TTK Bourjois Chanel (VI - NL) 4 x QS 3.2 with TTK Stute-Bremen (VI - MG) 3 x QS 3.2 with TDG Audi (VI - MG) 4 x QS 3.2 with TDG Smart (VI - MG) 2 x QS 3.2 with TDG Micarna (VI - MG) 8 x QS 3.2 with TDG Hayes Lemmerz Bremen (VI - MG) 4 x QS 3.2 with TDG Hayes Lemmerz München (VI - MG) 3 x QS 3.2 with TDG TDG TTK TFG ZTK VTK LHD for multiple-deep (up to 6 deep) storage (telescopic table with two parallel arranged belt-conveyors) for standard-totes and cartons, etc. with 400 mm width, payload 100 kg (2 x 50 kg or 4 x 25 kg etc.) Transfer time single deep: 4 s Transfer time double deep: 5 s Simple telescopic-table, adapted to the respective task, payload max. 300 kg. Transfer time based on Euro tote 600 x 400 mm: 4 s Table for the single deep in- and out feed to static picking positions, payload per tote max. 50 kg. Transfer time to rack or P/D position: 4 s Transfer time to pick positions: 4-6 s Pulling technique table, adapted to the respective tray-size, payload max. 300 kg. Transfer time based on a try x 600 mm: 5 s Vacuum technique table, for the handling of up to four cartons / totes with a max. payload of 50 kg / carton. Carton sizes can differ between LxWxH 250x200x100 mm and 650x850x600 mm. Transfer timing is dependent on the strategy at the P/D area.

7 4.2 Length overall 3525 / 3950 mm Aisle clearance 800 mm Weight at 6m/14m ca / 2070 kg Max. installation height 6 / 14 m Transfer time app. 2,5 s Landmacht (VI - NL) 3 x QS 4.2 with FG2 Dade Behring (VI - MG) 4 x QS 4.2 with FG2 Arrow (VI - MG) 5 x QS 4.2 with FG2 FG2 (Al.), FG4, TTK, GFK Number of LHDs 2 Max. payload 2 x 50 kg FG2/4 TTK GFK LHD for single-deep storage/sorting with flip-technique, for totes and cartons (base: 400 x 600 mm) with flat, concave, clean bottom, payload 50 kg, take-over from static positions or roller-conveyors. Transfer time 2,5 s Simple telescopic-table, adapted to the respective task, payload max. 300 kg. Transfer time based on Euro tote 600 x 400 mm: 4 s LHD for single-deep sorting for totes and cartons (base: 400 x 600 mm), payload 50 kg, take-over from driven conveyors, take-over from driven conveyors or gravity-tracks. Transfer time 2,0 s

8 4.4 Length overall 3950 mm Aisle clearance 800 mm Weight at 6m/14m ca / 2330 kg Max. installation height 14 m Transfer time app. 2,5 s Förch (VI - MG) 12 x QS 4.4 with FG Casaventa (VI - NL) 7 x QS 4.4 with FG4 Entertainment UK (VI - NL) 8 x QS 4.4 with FG2 Game Stores (VI - UK) 2 x QS 4.4 with FG2 FG2 (Al.), FG4, TTK, GFK Number of LHDs 2 Max. payload 2 x 50 kg FG2/4 TTK GFK LHD for single-deep storage/sorting with flip-technique, for totes and cartons (base: 400 x 600 mm) with flat, concave, clean bottom, payload 50 kg, take-over from static positions or roller-conveyors. Transfer time 2,5 s Simple telescopic-table, adapted to the respective task, payload max. 300 kg. Transfer time based on Euro tote 600 x 400 mm: 4 s LHD for single-deep sorting for totes and cartons (base: 400 x 600 mm), payload 50 kg, take-over from driven conveyors, take-over from driven conveyors or gravity-tracks. Transfer time 2,0 s

9 7 Length overall up to 12 m Aisle clearance 800 mm Weight (incl. load) (H=6/14m,L=10m) ca / 2070 kg Max. installation height 14 m Speed drive up to 5 m/s Transfer time app. 2,5 s TVH 3 (VI - NL) 4 x QS 7.3 with FG4 Franzin (VI - NL) 1 x QS 7.2 with FG2 Micarna (VI - MG) 4 x QS 7.2 with FG 2 FG2 (Al/St), FG4, TTK, TFG,TDG Number of LHDs variable Max. payload 50 kg FG2/4 TTK TFG TDG LHD for single-deep storage/ sorting with flip-technique, for totes and cartons (base: 400 x 600 mm) with flat, concave, clean bottom, payload 50 kg, take-over from static positions or roller-conveyors. Transfer time 2,5 s Simple telescopic-table, adapted to the respective task, payload max. 300 kg. Transfer time based on Euro tote 600 x 400 mm: 4 s Table for the single deep inand out feed to static picking positions, payload per tote max. 50 kg. Transfer time to rack or P/D position: 4 s Transfer time to pick positions: 4-6 s LHD for multiple-deep (up to 6 deep) storage (telescopic table with two parallel arranged beltconveyors) for standard-totes and cartons etc. with 400 mm width, payload 100 kg (2 x 50 kg or 4 x 25 kg etc.) Transfer time single deep: 4 s Transfer time double deep: 5 s

10 Lifting units, shuttle cars and mini sorter Micarna (VI - MG) 25 lifting units