RIISAM211D Remove, repair and refit tyres and tubes MAPPING

Transcription

1 RIISAM211D Remove, repair and refit tyres and tubes MAPPING

2 Copyright SkillsDMC Resources and Infrastructure Industry Skills Council Ltd (t/a SkillsDMC) Level 9, 36 Carrington Street, Sydney, NSW 2000, Australia Telephone: +61 (0) Facsimile: +61 (0) Web: Published by: Resources and Infrastructure Industry Skills Council Ltd (t/a SkillsDMC) Level 9, 36 Carrington Street, Sydney, NSW 2000 First published: 2014 Disclaimer SkillsDMC are the owner of all copyright and other intellectual property rights in the products and any modifications made by SkillsDMC to the materials (parent document issued to you at point of sale and as reflected in the invoice). You acknowledge that, apart from the limited licence granted under these Terms of Sale, you have no right, title or interest (including intellectual property rights) in the products. You will do anything reasonably required to give effect to our ownership of the products (parent document). 2

3 TABLE OF CONTENTS Elements and performance criteria 4 Performance and knowledge evidence 6 3

4 NOTE: At sites where it is a statutory or organisational requirement that a unit of competency is fully achieved, it is recommended that each mapping is reviewed and confirmed according to site procedures. ELEMENTS AND PERFORMANCE CRITERIA Theory assessment Practical assessment 1. Plan for removal, repair and refitting of tyres and tubes 1.1. Access, interpret and apply tyre service and maintenance 1 1a documentation and ensure the work activity is compliant 1.2. Obtain, read, interpret, clarify and confirm work requirements 2, 3, 4, 5 1b, 1d 1.3. Identify and address potential risks, hazards and environmental 6, 7 1c, 1e, 1f, 1g issues, and implement control measures 1.5. Select and wear personal protective equipment appropriate for the 1d, 5d work activity 1.6. Obtain and interpret emergency procedures and be prepared for 8 1h, 1i, 1j fire/accident/emergency 1.7. Set up and schedule work 9 1j N.B. The omission of 1.4 in the numbering system for the Performance Criteria under this element reflects the numbering system in the most current version of the RII Training Package. This will be reviewed in the next ISC Update and will be reviewed in this document at that time. 2. Prepare for removal, repair and refitting of tyres and tubes 2.1. Identify wheel assembly and the type of mounting system 10, 11 2a, 2b 2.2. Prepare, clean and inspect wheel assembly for damage, 12, 13 2c, 2d wear, corrosion, foreign material, cracks, and compatibility of components 2.3. Select tools and equipment and check they are fit for purpose e, 2f 3. Assess and control risk in removal, repair and refitting of tyres and tubes 3.1. Identify, control or report any hazardous conditions of the work environment before proceeding. Note points where safety checks are required 18, 19 3a-3c 3.2. Identify, control or report any hazardous conditions of the assembly d-3f before proceeding. Note points where safety checks are required 3.3. Identify, control or report any task hazards before proceeding. Note 24, 25 3f, 3g points where safety checks are required 3.4. Ensure that tyre and or tube is fully deflated before proceeding with 26, 27 3f, 3h the task 3.5. Identify the safe removal and purging of toxic fill substances 28, 29, 30 3i, 3j 4. Remove tyre and or tube from wheel/rim assembly 4.1. Apply methods for the removal of tyres and tubes 32 41, 4b 4.2. Clean and inspect wheel/rim assembly components and assign 37, 38 4d status of disposition 4.3. Complete required documentation 39 4f 5. Inspect wheel/rim assembly components prior to assembly 5.1. Ensure selected wheel/rim assembly components are compatible a, 5b and suitable for application 5.2. Inspect the tyre for serviceability 43 5c, 5d 5.3. Inspect the wheel/rim and associated parts for serviceability 44 5c, 5d 4

5 Theory assessment 5.4. Inspect the fastening systems for serviceability 45 5d 5.5. Assess vehicle hub for serviceability and inspect where applicable 46 5d 6. Fit tyre and or tube to wheel/rim assembly 6.1. Apply methods for the fitment of tyres and tubes c, 6b 6.2. Assess need for tyre additive and add where required 50, 51 6d, 6e 6.3. Carry out refitting/replacement f, 6g 6.4. Conduct integrity check of wheel assembly 57 6i 6.5. Complete required documentation 58 6j 7. Inflate assembly 7.1. Inflate assembly for storage or use 59 7c 7.2. Complete required documentation 62, 63 7d 8. Inspect, tyres, tubes and wheels/rims 8.1. Inspect tyres, tubes and wheels/rims for serviceability, and or 64, 65 8a reparability 8.2. Carry out inspections and tests and identify those requiring minor 67 8d repair 8.3. Complete required documentation 69 8d 9. Carry out a minor tube and tyre repair 9.1. Identify task hazards and risks, and apply risk controls and a, 9c equipment to be used 9.2. Carry out minor repair of tubes and tyres 74 9d 9.3. Complete appropriate require documentation 75 9d Practical assessment 5

6 PERFORMANCE AND KNOWLEDGE EVIDENCE Performance evidence Evidence is required to be collected that demonstrates a candidate s competency in this unit. Evidence must be relevant to the roles within this sector s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate: locates and applies relevant legislation, documentation, policies and procedures demonstrates consistent timely completion of removal, fitting and repair of tyres and tubes that safely, effectively and efficiently meets the required outcomes on a minimum of three (3) separate occasions including: Theory assessment Practical assessment 1, 2, 13, 19, 40, 1h, 2c, 3a, 4a, 5b 49 12, 43, 44, 64 2c, 8b, 8c Inspecting wheel assembly for: damage wear corrosion foreign material cracks compatibility of components controlling or reporting hazardous conditions related to: work environment 5, 24, 25 1e, 1g, 3e, 3d-3g, 9a, 9d assembly tasks tyre/tube toxic fill substances removing tyre and/or tube from wheel/rim 33, 43 5b inspecting wheel/rim 12, 43, 44, 64 2c, 8b, 8c carrying out minor tube and tyre repairs 33, 36, 43 4c, 4d, 9d fitting tyre and/or tube 47, 48, 49, 54 6b, 6c inflating assembly 50, 51 6d, 7b Knowledge evidence The candidate must demonstrate knowledge in servicing plant and equipment through: accessing, interpreting and applying organisational and site requirements and procedures for: identifying and managing risks 60 1a, 5d, 6f, 7d, 8d equipment safety requirements 14, 17 3c, 3g, 4e, 5d, 9d inspections 13, 17, 38 3c, 4c, 5d, 8d tyre and tube removal and refitting/replacement 38, 45, 46, 52 6f, 7d, 8d tyre and tube repair 38, 45, 46, 52 6f, 7d, 9b ballast identification, types and application 60, 61 7c, 7d tyre fill identification, types and application 50, 51 6d tyre fill adding/removal methods 51 6d, 6e 6

7 Theory assessment Practical assessment relevant manufacturer/company policies 13, 19, 74 1a, 5b, 5d, 6f, 7d, 8d types of tubes and tyres and their construction 10, 11 2a, 2b workplace requirements in relation to tyre repair 40, 43 3c, 4e, 5b, 8d, 9d roadworthiness requirements relating to tyres and rims 64 8e, 8f 7

8