RFID systems Issue 4.1

Transcription

1 Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service RFID systems Issue.1 ID 0 / ID 0 / ID

2 0 Bosch Rexroth AG RFID systems (-0) Symbols Suitable for use in ESD Protected Areas. Contact with your Rexroth representative is recommended. Protection type [IP] Dynamic data transfer khz Operating frequency...6 bar Compressed air connection required PROFIBUS DP AS interface Modbus/TCP EtherNet/IP Profinet - - Reference to technical data/dimensions Reference to another page

3 1 00 (-0) RFID systems.1 Bosch Rexroth AG 1 1 RFID systems Table of contents Introduction RFID system ID 0 RFID system ID 0 RFID system ID Technical data Overview of order numbers, index

4 1 Bosch Rexroth AG RFID systems (-0) RFID systems RFID in assembly technology Identification and data tag systems are used to control numerous production and transport systems in assembly technology applications. Object-related data not only form the basis for the targeted control of process and processing steps, but also for the type- or variantdependent infeeding and outfeeding of workpiece pallets during the production of product variants on branched, flexible assembly systems. Two basic principles characterize the handling of workpiece-related data: Central data storage is based on the centralized storage of all workpiece-relevant data. This requires reliable workpiece identification at the processing station, whereby the associated data are retrieved from the central data storage. Decentralized data storage is based on mobile data tag systems, whereby the workpiece-relevant data are sent along directly with the workpiece (or on the workpiece pallet). High-performance read and write heads, which read out or modify the information, are required at the processing stations. ID 0 - VarioFlow ID 0 - TS plus ID 0 - TS ID 0 - TS plus ID - TS plus

5 1 00 (-0) RFID systems.1 Bosch Rexroth AG 1 RFID systems Types of data storage Central data storage With central data storage, the data related to the process and product are stored centrally. Mobile data tags on the workpiece pallet as well as the corresponding readers ensure reliable workpiece identification at the production stations. On the basis of the workpiece identity, the associated data set is indexed in order to load the data into the PLC or cell controller. The cell controller reads out the product type (variant, order or production batch) and the respective production status. This information is used to determine whether and which process steps are required. After passing through the production station, the information in the data set is supplemented. The data flow between the processing station and the central computer with the data storage requires a network. Decentralized data storage With decentralized data storage, the data related to the process and product accompany the workpiece. The workpiece pallets are equipped with a mobile data tag that has a high storage capacity and offers the possibility to read and write data. The data with the mobile data tag, which can be read or edited at any time via the corresponding read / write heads, are currently available at each processing station. The individual stations can thus independently handle the respective production processes; a network is not required for the workpiece data

6 1 Bosch Rexroth AG RFID systems (-0) RFID systems Main features System ID 0 ID 0 ID Central data storage Decentralized data storage PLC connection via AS-i + PROFIBUS DP + + Modbus + EtherNet/IP + Profinet + TCP/IP + Parallel Data Write + + o Read Attachment to workpiece pallet Extension module Integration + + Maximum speed for dynamic reading (m/min) 0 0 Frequencies khz 1. MHz khz 1.6 MHz Max. read distance, static (mm) Operating temperature of data tag ( C) Min. number of write cycles 10 billion 10 billion Max. memory size KB KB bit

7 1 00 (-0) RFID systems.1 Bosch Rexroth AG 1 RFID system ID 0 RFID system ID 0 Operating principle - Communication module - Antenna - Mobile data tag -6 Assembly kits - Assembly options -10 Accessories - cable - Diagnostics package

8 Bosch Rexroth AG RFID systems (-0) RFID system ID 0 RFID system ID 0 khz 1,6 MHz The RFID system ID 0 is a modular identification system that was developed for industrial use in production environments. The system consists of mobile data tags, antennas and communication modules. The system components have a robust and compact design and the system is particularly insensitive to faults and ensures secure data transmission. ID 0 is suitable for applications with both centralized and decentralized data storage. The mobile data tags with inexpensive EEPROM memory are particularly small and are suitable for applications with low data volumes. The versions with FRAM memory can also store larger data quantities locally and are readable and rewritable almost as often as you like. They are the preferred choice for applications with short transmission times. Antennas are available in different designs and transmission frequencies. The appropriate version can therefore be selected for any application and installation location. The communication modules constitute the connection between the antennas and the higher-level control system. You can simultaneously control up to two antennas, including ones at different frequencies. PROFIBUS DP or Ethernet are available as control system interface options. 0011

9 1 00 (-0) RFID systems.1 Bosch Rexroth AG RFID system ID 0 1 MDT...H -6, -7 MDT...L Mobile data tags MDT...L for khz. Mobile data tags MDT...H for 1.6 MHz Flat antennas A...F for khz or 1.6 MHz. Round antennas A...R for khz or 1.6 MHz Communication modules C-... for PROFIBUS or Ethernet. 6 Control system 1

10 Bosch Rexroth AG RFID systems (-0) RFID system ID 0 Communication module ID 0/C-... khz 1,6 MHz IP The communication module constitutes the connection between the antennas and the control system. It provides pluggable connections for up to two antennas, which can be active simultaneously and work at different frequencies. Alternatively, a digital sensor can also be connected to each antenna. Parameterization and diagnosis are done via the integrated web server.,6 1 ID 0/C-PDP The connection to the control system is established via PROFIBUS-DPV0. The integrated web server is reached via a separate RS- interface. ID 0/C-ETH The connection to the control system is established via Ethernet. In addition to TCP/IP, the Profinet/IO, Modbus/ TCP and EtherNet/IP Ethernet protocols are also available. An integrated switch enables line structure cabling in addition to the conventional Ethernet star shape cabling. Communication module ID 0/C-... ID 0/C-PDP ID 0/C-ETH , Operating voltage...0 VDC, PELV Waviness 10% Current consumption Max. 0. A (including antennas) Status indicators 7 LEDs Connections: RS ID 0/C-PDP PROFIBUS-DPV0 Profinet ID 0/C-ETH Ethernet/IP Modbus/TCP TCP/IP Protection type IP6 Housing material Aluminum; powder-coated, RAL 70 Ambient temperature +70 C Storage temperature C Humidity Max. 6% Vibration resistance. mm (10... Hz); g ( 00 Hz) Shock and impact resistance 70 g/6 ms cycles Approvals EN 000, ETS 006, CE, FCC Mass 0. kg 107 6

11 1 00 (-0) RFID systems.1 Bosch Rexroth AG RFID system ID 0 Antenna ID 0/A-... khz 1,6 MHz 00 The antennas are used to read and write mobile data tag MDT...L ( khz, low frequency) or MDT...H (1.6 MHz, high frequency). The antennas are designed for operation on a communication module and are also powered from this module. Antenna ID 0/A-...F (flat antenna) The flat design of the antenna is optimized for side mounting on transfer systems. Other installation situations are possible with corresponding assembly kits. Antenna ID 0/A-...R (round antenna) The round design of the antenna is particularly suitable for reading data tags that are mounted on the underside of the workpiece pallet. Other installation situations are possible with corresponding assembly kits. Accessories: Assembly kits F - Note: Mobile data tag MDT.../...H for 1.6 MHz F -6 Mobile data tag MDT.../...L for khz F ,6 7,, Antenna ID 0/A-...F ID 0/A-HF (1.6 MHz) ID 0/A-LF ( khz) 10 6 L LED Mx1, Mx1 Antenna ID 0/A-...R ID 0/A-HR (1.6 MHz) ID 0/A-LR ( khz) 10 7 Type ID 0/A-LR ID 0/A-LF ID 0/A-HR ID 0/A-HF Operating voltage (from communication module) V V V V Status indicator LED orange/green LED orange/green LED orange/green LED orange/green Protection type IP67 IP67 IP67 IP67 Housing material PBT/ PBT/ stainless steel ABS plastic stainless steel ABS plastic Ambient temperature C C C C Storage temperature -0 + C -0 + C -0 + C -0 + C Humidity max 6% max 6% max 6% max 6% Vibration resistance 1 mm (10... Hz); g ( Hz) Shock and impact resistance 0 g/11 ms cycles Mass 0.1 kg 0.1 kg 0.1 kg 0.1 kg Transmission frequency khz khz 1.6 MHz 1.6 MHz Read/write distance static mm mm mm mm dynamic (v = m/min) mm mm 0 mm 0 mm min. distance between two antennas multiplex operation 0 mm 0 mm 0 mm 100 mm simultaneous operation 0 mm 0 mm 0 mm 0 mm

12 6 Bosch Rexroth AG RFID systems (-0) RFID system ID 0 Mobile data tag MDT...H (1.6 MHz) IP 6 1,6 MHz 0011 The mobile data tags are compatible with international standard ISO 6 (1.6 MHz) and work without batteries and with FRAM memory. Several housing variants offer a wide range of installation positions on the workpiece pallet or directly on the products to be identified. The data tags can be read from several sides, including dynamically while passing. MDTs with FRAM memory Memory capacity: 00 byte user memory Additional 6 bit: unique serial number Read/write cycles: ,7,, MDT , 10,,, 10,7 MDT I wt, b wt > 0 (PA), 11, MDT with FRAM memory MDT 1/K-H MDT /K-H MDT /K-H MDT /K-H 10 MDT 6/K-H MDT, 00100,, , 1,, 1, 001 1, 6 Type Frequency Conformity with standards Memory capacity Data access Memory type Number of write cycles Number of read cycles Transmission distance static dynamic Ambient temperature during operation Housing material MDT.../K-H 1.6 MHz ISO 6 00 bytes byte block FRAM 10 billion unlimited mm 0 mm C PA , 10, 6 MDT I wt, b wt > 0 (PE), 1,6 MDT 6 I wt, b wt = 0 (PA, PE) 1,1 10,7 11 -

13 1 00 (-0) RFID systems.1 Bosch Rexroth AG 7 RFID system ID 0 Mobile data tag MDT L ( khz) IP 6 The mobile data tag MDT.../-L is located directly on the workpiece pallet and stores the identification allocated by the user during initialization. The compact MDT has a non-volatile EEPROM (battery back-up not required) with a memory capacity of bytes (payload data). MDT.../-L can be read from all sides (front, lift/right side, top and bottom) an unlimited number of times. In addition to various installation positions on the workpiece pallet, seamless integration into the workpiece pallet is also possible F -, -. ID data tags from manufacturing date FD6 can be initialized using the diagnostic package DPS/L for use with ID 0. The simultaneous operation of ID and ID 0 is not possible. MDT...L MDT 11/-L MDT 1/-L 1 MDT /-L MDT 1/-L 11 MDT /-L Type MDT.../-L Frequency khz Conformity with standards Memory capacity bytes Memory type EEPROM Number of write cycles 100,000 Number of read cycles unlimited Transmission distance static mm dynamic mm Ambient temperature during operation C Housing material PA66 MDT 11/-L MDT /-L,,, (x) 7,6 7,6 6, 6, MDT 1/-L, 6, 7,6 MDT 1/-L MDT /-L

14 Bosch Rexroth AG RFID systems (-0) RFID system ID 0 Assembly kits ID TS 1 TS plus TS plus TS 1 TS plus TS plus 0, 1, 66,, 10, ,, 71, 6, 1,,,, 7, 6, 0, 100 Assembly kit ID 0/MS-1 ID 0/MS Assembly kit ID 0/MS- ID 0/MS TS plus TS plus TS plus Assembly kit ID 0/MS- ID 0 /MS Assembly kit ID 0/MS- ID 0/MS

15 1 00 (-0) RFID systems.1 Bosch Rexroth AG RFID system ID 0 Assembly kits ID 0 00 VarioFlow, b = b = Assembly kit ID 0/MS-, 0 ID 0/MS , 6 TS plus TS TS 001 Assembly kit ID 0/MS-6 ID 0/MS , 7, Assembly kit ID 0/MS-7 ID 0/MS-7 1 Assembly kit ID 0/MS- ID 0/MS-

16 10 RFID systems.1 Bosch Rexroth AG 1 00 (-0) RFID system ID 0 Assembly options ID 0 TS 1 TS plus TS plus lwt, bwt > 0 (PA) TS plus lwt, bwt > 0 (PE) 1,6 MHz Mobile data tag MDT 1/K-H MDT /K-H MDT /K-H MDT /K-H MDT 6/K-H Kit for WT Assembly kit flat antenna ID 0/MS-1 ID 0/MS- ID 0/MS- ID 0/MS-7 (longitudinal conveyor) ID 0/MS- (transverse conveyor) Flat antenna ID 0/A-HF Assembly kit round antenna ID 0/MS-6 Round antenna ID 0/A-HR khz Mobile data tag MDT 11/-L MDT 1/-L MDT 1/-L MDT /-L MDT /-L Kit for WT Assembly kit flat antenna ID 0/MS- ID 0/MS- ID 0/MS- ID 0/MS- ID 0/MS-7 (longitudinal conveyor) ID 0/MS- (transverse conveyor) Flat antenna ID 0/A-LF

17 1 00 (-0) RFID systems.1 Bosch Rexroth AG 11 RFID system ID 0 Assembly options ID 0 1 TS plus TS plus lwt, bwt = 0 (PA, PE) TS VarioFlow

18 Bosch Rexroth AG RFID systems (-0) RFID system ID 0 Accessories - cable 0010 Connecting cable between antenna and communication module. Antenna cable Socket Plug l (m) ID 0/K-ANT-M straight angled ID 0/K-ANT-M straight angled ID 0/K-ANT-M angled angled ID 0/K-ANT-M angled angled Power supply for communication module. Power supply cable l (m) ID 0/K-VCC-M Ethernet cable for connection between communication module and control system. Ethernet cable l (m) ID 0/K-ETH M - M ID 0/K-ETH M - 10M ID 0/K-ETH M - M 10 1 ID 0/K-ETH RJ - M 10 1 ID0_Ethernet

19 1 00 (-0) RFID systems.1 Bosch Rexroth AG 1 RFID system ID PROFIBUS cable for connection between communication module and control system. PROFIBUS cable ID 0/K-PDP R ID 0/K-PDP Y Cable l (m) 0011 PROFIBUS cable with termination resistor 001 PROFIBUS Y cable Diagnostic cable for PROFIBUS variant. For connection between communication module and PC. Required accessories: Null modem cable Diagnostic cable ID 0/K-Diag l (m) Null modem cable to connect the diagnostic cable to a PC for PROFIBUS variant. Null modem cable ID 0/K-NMK 001 l (m)

20 1 Bosch Rexroth AG RFID systems (-0) RFID system ID 0 Diagnostics package DPS/L Use: Test and initial description of the mobile data tag MDT.../-L ( khz) via a PC external to the plant. Software functions: Reading the MDT.../-L Writing the MDT.../-L Importing prepared lists (csv format) Writing the MDT.../-L as per list Scope of delivery: Manual antenna with data cable for connecting to a USB port Software on CD-ROM 006 Diagnostics package DPS/L DPS/L 06

21 1 00 (-0) RFID systems.1 Bosch Rexroth AG 1 RFID system ID 0 RFID system ID 0 Operating principle - Mobile data tag - Read/write head - Accessories

22 Bosch Rexroth AG RFID systems (-0) RFID system ID 0 Identification and data memory system ID 0 The identification system ID 0 provides a reliable and fast supply of workpiece data on the workpiece pallet. Relevant information must be available at every processing station for each arriving part, such as Workpiece type Production status Next processing step Setting parameters These are particularly important where products are being manufactured on the same plant in several variants. All data is stored by a stationary read/ write head (SLK) - on a mobile data tag (MDT) -, which is located directly on the workpiece pallet (WT) and goes through the entire installation process with it. Decentralized data storage guarantees short access times and high system availability. 00 An integrated delete function, which must be triggered on the SLK only, enables the data memory to be cleared so it no longer remains in the SLK. The read/write head (SLK) offers a direct fieldbus connection for the fieldbus system PROFIBUS DP via M plug-in connection. The ID 0 enables dynamic data transmission: When passing at distance a and at a transport speed of up to 0 m/ min, the transmission capacity is 6 bytes. a = 10 mm Transmission range at front a = 6 mm Transmission range at side The user manual, latest information and software can be downloaded under

23 1 00 (-0) RFID systems.1 Bosch Rexroth AG RFID system ID 0 Mobile data tag ID 0/MDT IP 6 1, MHz 00 The mobile data tag (MDT) for the ID 0 is located directly on the workpiece pallet and stores the workpiece data. The compact MDT has a non-volatile RAM (battery back-up not required). It can be read and written from three sides (front, left/right side) up to 10 billion times and enables diverse installation positions on the workpiece pallet. The MDT memory capacity is either approx. KB, KB or KB. The threecolor status LED on the MDT displays correct data transmission and transmission errors. The MDT complies with protection type IP6. Scope of delivery: Includes assembly kit 7. Optional accessories: Assembly kits - Mobile data tag ID 0/MDT ID 0/MDTK 06 0 ID 0/MDTK 06 0 Memory capacity - MDTK - MDTK 10 bytes 000 bytes Data retention time > 10 years (... 0 C) Data access bytewise Ambient temperature during operation +70 C Storage temperature + C Humidity +... % Protection type IP6 Housing material Polyamide PA6 Media resistance Water, mineral oil, other on request Mass 0.06 kg Transmission direction frontal or on the right/left side Read/write distance frontal... mm/ mm static/dynamic at side mm/ mm static/dynamic Permissible height offset between SLK +/- mm and MDT Status indicators LED, -color Installation in metal 10 mm clearance on all sides required

24 Bosch Rexroth AG RFID systems (-0) RFID system ID 0 Read/write head ID 0/SLK- 00 The read/write head (ID 0/SLK- ) is used to transfer workpiece data between MDT and a bus master to control workpiece pallets in the Rexroth transfer systems. The SLK can be easily installed in the Rexroth transfer systems TS 1, TS plus and TS plus using a standard assembly kit. Direct connection to the fieldbus system PROFIBUS DP (ID 0/SLK-PDP) via M plug-in connection. The antenna of the SLK can be swiveled through 0 and rotated through 0, providing a variety of installation possibilities. The semi-transparent cover of the antenna lights up during data transmission with the MDT. The -digit alphanumeric display provides information about the current status of the fieldbus connection and the communication with the MDT. The built-in RS serial interface enables parameterization and diagnosis, e.g. with a web browser and a notebook. Userfriendly power supply via a standard AS-i profile cable (black). The SLK complies with protection type IP6. Scope of delivery: Includes assembly kit 7 6. Read/write head ID 0/SLK- ID 0/SLK PDP Operating voltage V + % Waviness < 10% Current consumption max. 0. A Fieldbus connections Profibus-DPV0 serial interface RS Status indicators 1 LED alphanumeric display Protection type IP6 Ambient temperature + + C Storage temperature + C Humidity 6% Approvals EN 000, ETS 006, CE Weight (including mounting plate) 0. kg max. read/write distance static mm dynamic (v = m/min) 10 mm min. distance between two read/ 100 write heads Installation in metal 10 mm clearance required

25 1 00 (-0) RFID systems.1 Bosch Rexroth AG RFID system ID 0 Accessories Assembly kit for ID 0/MDT... Assembly kit (A) in a reinforced version for applications with high mechanical load of the data tag. Assembly kit (B) for using the ID 0/MDT as a replacement for ID 0/E on workpiece pallets WT with ID 0 drill pattern Assembly kit (A) 70 Assembly kit (B) Assembly kit for ID 0/SLK for vibration-decoupled mounting. Application in high vibration environments (on request) Assembly kit ID 0 7* * Price and availability on request.

26 6 Bosch Rexroth AG RFID systems (-0) RFID system ID 0 Accessories - software, cable Configuration and diagnostic software package for setting equipment parameters (such as the fieldbus node number) and reading out system diagnostics data. System requirements Win NT.0/Win 00/Win XP diagnostic cable RS (M plug on -pin Sub-D) Configuration and diagnostic software package Diagnostic cable RS The diagnostic cable is used: to efficiently exchange data via web browsing functionality for the direct serial connection to workstations to set the ID 0/SLK bus address to read out the internal diagnostic memory Diagnostic cable RS l (m) 06 1 Function modules Contain all the basic functions for reading and writing data blocks on the MDT, parameterizable. For Siemens S7 controllers from CPU onwards For Rexroth IndraLogic on request Function modules Siemens S7 controllers Fieldbus connection cable l (m) PROFIBUS DP *) M plug, straight, open end M socket, straight, open end M plug, angled, open end 10 0 M socket, angled, open end 10 0 M plug, angled, M socket, angled 10 0 Fieldbus termination resistor 06 6 *) No GND on pin, shield on the housing

27 1 00 (-0) RFID systems.1 Bosch Rexroth AG 1 RFID system ID RFID system ID Operating principle - Read/write head - Mobile data tag - Diagnostics package - Fastening kits -6 Protective cover -7 Assembly options - Addressing device and AS-i accessories

28 Bosch Rexroth AG RFID systems (-0) RFID system ID Identification system ID The identification system ID enables the reliable and quick identification of workpieces. The data tag can be mounted on or below the workpiece pallet and can also be fully integrated into the Rexroth workpiece pallet. Short access times with high interference resistance and high availability are the main features of the system. The read/write head (SLK) offers a direct connection to the actuator sensor level via AS-i via an M plug-in connection. The ID enables dynamic data transmission: When passing at distance a and a transport speed of up to m/min. A separate antenna with USB connection used in conjunction with the ID diagnostic software enables quick and easy initialization of the data tag. 00 The user manual, latest information and software can be downloaded under a = 0 mm Transmission range at front a = 0 mm Transmission range at side a = 0 10 mm Transmission range at top

29 1 00 (-0) RFID systems.1 Bosch Rexroth AG RFID system ID Read/write head ID /SLK IP The read/write head (ID /SLK) is used to transfer workpiece data between MDT.../-L and an AS-i bus master to control workpiece pallets in the Rexroth transfer systems. With the ID /SLK, a maximum of bits of user data can be written or read on an MDT.../-L. The SLK can be easily installed in the Rexroth transfer systems TS 1, TS plus and TS plus and VarioFlow chain conveyor system using standard fastening kits. Direct connection to AS-i via M plug-in connection, can be swiveled through 70. Three light-emitting diodes show Operational readiness (green) Presence of a data tag in the field (yellow) Fault (red) Scope of delivery: Read/write head Required accessories: Fastening kit according to the application F -6 Read/write head ID /SLK- ID /SLK a a 100 mm Mx1 LED a a 1,7, a > 100 mm 60-.eps a a, a 60-.eps Operating voltage (via AS-i power pack) V Current consumption max. 0.1 A Fieldbus connections AS-i, profile 7. Status indicators LEDs Protection type IP67 Housing material PA Ambient temperature +60 C Storage temperature +0 C Humidity % Vibration resistance DIN EN g ( Hz) Shock and impact resistance EN g/6 ms Shock and impact resistance EN g/11 ms Approvals EN 000, EN 616, CE, FCC Mass 0.1 kg max. read/write distance static mm dynamic (v = m/min) mm min. distance between two read/write heads 00 mm (reading and writing) 0 mm (only reading)

30 Bosch Rexroth AG RFID systems (-0) RFID system ID Mobile data tag MDT L ( khz) IP 6 The mobile data tag MDT.../-L is located directly on the workpiece pallet and stores the identification allocated by the user during initialization. The compact MDT has a non-volatile EEPROM (battery back-up not required) with a memory capacity of bytes (payload data). MDT.../-L can be read from all sides (front, lift/right side, top and bottom) an unlimited number of times. In addition to various installation positions on the workpiece pallet, seamless integration into the workpiece pallet is also possible F -, -. MDT 11/-L,,, (x) 7,6 7,6 6, 6, MDT 1/-L, 6, 7,6 ID data tags from manufacturing date FD6 can be initialized using the diagnostic package DPS/L for use with ID 0. The simultaneous operation of ID and ID 0 is not possible. MDT...L MDT 11/-L MDT 1/-L 1 MDT /-L MDT 1/-L 11 MDT /-L MDT /-L MDT 1/-L Type MDT.../-L Frequency khz Conformity with standards Memory capacity bytes Memory type EEPROM Number of write cycles 100,000 Number of read cycles unlimited Transmission distance static mm dynamic mm Ambient temperature during operation C Housing material PA66 MDT /-L -

31 1 00 (-0) RFID systems.1 Bosch Rexroth AG RFID system ID Diagnostics package DPS/L Use: Test and initial description of the mobile data tag MDT.../-L ( khz) via a PC external to the plant. Software functions: Reading the MDT.../-L Writing the MDT.../-L Importing prepared lists (csv format) Writing the MDT.../-L as per list Scope of delivery: Manual antenna with data cable for connecting to a USB port Software on CD-ROM Diagnostics package DPS/L DPS/L

32 6 Bosch Rexroth AG RFID systems (-0) RFID system ID Fastening kits for read/write head, ID /SLK,,, Ø, (x),,, (x) 6 7, 6, 0, 66 6,6, (x) 6, 10, , 1,,, 6,6, (x) 0 7 6, 6,6 7, (x), (x), 6 1 0,, Fastening kit ID /MS-1 ID /MS-1 Fastening kit ID /MS- ID /MS Fastening kit ID /MS- ID /MS-

33 1 00 (-0) RFID systems.1 Bosch Rexroth AG 7 RFID system ID Protective cover for ID /SLK Protective cover ID /SLK ID /SLK 7,

34 Bosch Rexroth AG RFID systems (-0) RFID system ID Assembly options ID Installation on workpiece pallets TS 1, TS plus or TS plus TS 1 TS plus TS plus Mobile data tag MDT 11/-L MDT 1/-L 1 1 Fastening kit for read/write head ID /MS Integration in frame modules of workpiece pallets TS 1, TS plus or TS plus TS1 TS plus TS plus Mobile data tag MDT /-L MDT 1/-L 11 Fastening kit for read/write head ID /MS-1

35 1 00 (-0) RFID systems.1 Bosch Rexroth AG RFID system ID Attachment under workpiece pallet TS plus Integration in VarioFlow workpiece pallet TS plus Mobile data tag MDT /-L Fastening kit for read/write head ID /MS- VarioFlow Mobile data tag MDT /-L Fastening kit for read/write head ID / MS

36 10 Bosch Rexroth AG RFID systems (-0) RFID system ID Addressing device DPS/AS-i and AS-i accessories AS-i addressing device Use: The handy, robust addressing and diagnostics tool for commissioning, maintenance and servicing AS-i systems offers the following functions: Readout of slave addresses 0.. 1, A, B without scrolling with clear full LCD display Readout of slave IO and ID codes (including extended ID code 1 and ID code ) Standard addressing mode and extended addressing mode as per AS-i version.1. Programming of ID code 1 Functional test of slaves including analog slaves with profile 7.1 to 7. Detection of complete system assemblies Memory, diagnostic and PC gateway function Data transmission, management and documentation of system parameters using optional software Connection via plug M (A coded) Infrared interface 00 Scope of delivery: AS-i addressing and testing device DPS/AS-i with batteries ( x 1. V Mignon (AA) LR6). Addressing device DPS/AS-i DPS/AS-i 06 AS-i accessories AS-i branch terminal for connecting M plugs to an AS-i signal cable AS-i branch terminal 06 6 Connection cable M plug, straight, M socket, straight M plug, straight, M socket, angled l (m)

37 1 00 (-0) RFID systems.1 Bosch Rexroth AG 1 Technical data Technical data RFID system ID 0 - RFID system ID 0 - RFID system ID

38 Bosch Rexroth AG RFID systems (-0) Technical data RFID system ID 0 Drill patterns for workpiece pallets TS 1 WT1 TS plus TS plus PH SW M D = Nm M 7,7 7, TS plus TS plus , M

39 1 00 (-0) RFID systems.1 Bosch Rexroth AG Technical data RFID system ID 0 Drill patterns for workpiece pallets TS 1 TS plus 1 TS plus

40 Bosch Rexroth AG RFID systems (-0) Technical data RFID system ID Drill patterns for workpiece pallets TS 1 WT 1/K WT 1/S WT 1/P TS plus -7, -

41 1 00 (-0) RFID systems.1 Bosch Rexroth AG Technical data 1 TS plus SW M D = Nm, M TS plus 1,

42 6-0 Bosch Rexroth AG RFID systems (-0) Overview of order numbers, Index Overview of order numbers Order number Page Order number Page , , -10, , -10, , -10, , , -10, , -10, , -10, , , , , -10, , , -10, , , -10, -11, -, -, - -7, -10, -11, -, , -10, -, - -7, -10, -, - -6, - -6, - 1-7, -10, -11, -, - -6, , -11 -,

43 1 00 (-0) RFID systems.1 Bosch Rexroth AG 6 1 Overview of order numbers, index Index A Addressing device DPS/AS-i -10 AS-i branch terminal -10 AS-i accessories -10 C Central data storage 1- Connection cable -10 D Data storage in assembly technology 1- Decentralized data storage 1- Diagnostics package DPS/L -1, - I ID -1 Installation on workpiece pallets - Fastening kits for read/write head -6 Data tag - Diagnostics package DPS/L -1, - Operating principle - Integration in frame modules - Integration in VarioFlow workpiece pallets - Assembly options - Read/write head - -6, -7 Protective cover -7 Accessories -10 ID 0-1 Data tag - Fieldbus connection cable -6 Operating principle - Cable -6 Read/write head - Software -6 Accessories -, -6 ID 0-1 Antenna - Data tag MDT...H -6 Data tag MDT...L -7 Diagnostics package DPS/L -1, - Operating principle - Cable -, -1 Communication module - Assembly kits -, - Assembly options -10 Accessories -, -1 Identification and data memory system ID 0 - Identification system ID - Identification system ID 0 - M Main features 1- S Symbols 0- T Table of contents 1-1 Technical data

44 Bosch Rexroth AG Postfach Stuttgart, Germany Find your local contact person here: The data specified above only serves to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging (-0) Bosch Rexroth AG Subject to modifications