(૧)Ultrasonic Probe Sonicator and (૨)Digital Polarimeter મ ટ ન ટ ન ડર

Transcription

1 સ ય ષ ટ ર ય નનલનસ ટ ય જક ટ ટ ન ડય ન ટ સ ભ ન ય પ ક ચયય તથ અનધક ર ત નલક ર ત ઓ સ થ સ રફ ધ કલયભ ન ચ દળ લ ર નલજ ઞ નનક સ ધન (૧)Ultrasonic Probe Sonicator and (૨)Digital Polarimeter ન બ લ ભ ગ લલ ભ આલ ર છ. (૧)Ultrasonic Probe Sonicator and (૨)Digital Polarimeter મ ટ ન ટ ન ડર ક ય ટ ન ડય પ ભ નલગત સ થ સ ય ષ ટ ર ય નનલનસ ટ ન લ ફસ ઇટ યથ ડ ઉનર ડ કય ળક ળ. ડ ઉનર ડ કય ર ટ ન ડય સ થ પ ર.૧૫૦૦/- ન અરગ D.D. યજ સ ટ ર ય, સ ય ષ ટ ર ય નનલનસ ટ ન ન ભન જ ડલ ન યહ ળ. બય ર દય ક ટ ન ડય પ ભ સ થ EMD (ભનળન ન ક ભત ન ૩%) ન યજ સ ટ ર ય, સ ય ષ ટ ર ય નનલનસ ટ,ય જક ટ તથ ટ ન સ ય ક ત ન ભન ન ળન ર ઇઝડ ફ ન કન ફપક સ ડ ઝ ટ/D.D. સ થ ત.૨૭/૦૧/૨૦૧૭ સ ધ ભ યજ સ ટ ટડ સ ટ ટ / સ ટ ડ સ ટ ટ / ક ય મય ભ યપત.આઈ, GSBTM, યસ મણળ સ ત ર બલન, સ ય ષ ટ ર ય નનલનસ ટ,ય જક ટ-૫ ન ભ ત ય ત ભ કર આલ ન યહ ળ.ફ ધ કલયય (૧)Ultrasonic Probe Sonicator or (૨)Digital Polarimeter મ ટ ન ટ ન ડર ત ભ સ ટ ષ ટ ટ દળ લલ ન યહ ળ. બ લ સ ટ લ ક યલ ક ન સ ટ લ ક યલ આ અ ગ ન અફ નધત અનધક ય ય નનલનસ ટ ન યહ ળ. ભ ફહત / /૨૦૧૭ ક રસચચલ

2 SAURASHTRA UNIVERSITY RAJKOT Tender Form Date: / 01 /2017 Tender Fee: Rs. 1500/- Item No. Name of Item Tech. Specification QTY Rate 1 Ultra Sonic-Probe Sonicator Annexure Digital Polari meter Annexure

3 Terms & Conditions: 1) This tender form in sealed cover superscripted with Probe Sonicator or Polarimeter must reach PI, GSBTM, Chemistry Department, Saurashtra University, Rajkot On or before Dt: ) Each item possesses individual cover along with their tender fee, EMD, Technical Bid and Commercial Bid. 3) The Net prices are inclusive all types of taxes freights and installation Charges. 4) As the quantity shown in tender is indicative university may purchase more number of items at the given rate during the validity of rates mentioned by the vendor. 5) Validity of rates must be for at least one month however supplier may extend the validity. 6) University reserves the right to accept or reject any or all the tenders without assigning any reason. 7) IF not mentioned with specification, the supplier must provide minimum 1 year onsite warranty. 8) All transaction will be subject to Rajkot Jurisdiction. 9) Any tender received after due date and time will not be accepted. 10) The tender form should be filled up in the format provided. There should be no over writing, however if there is overwriting it should be initialed with the affixing of the seal of the tenderer, otherwise it will be considered as invalid. 11) The literature and the specification of the items are to be submitted along with the filled tender form, if necessary. 12) The tenderer shall be bound to supply the ordered items as per terms and at the accepted rates within the stipulated time period after receiving the Final order. Failing which the order shall be cancelled. 13) Any conditions from the tenderer for sending the goods shall not be entertained and that such tenders are liable to be rejected. 14) If the goods are sent by train, road or air transport only freight paid receipt should be sent. No payment for transportation shall be made by the Institute. 15) You have to install the item and make it in satisfactory working condition within stipulated time period mentioned in the order. 16) The deposit is liable to be forfeited if Party fails to supply ordered Item within stipulated time period mentioned in the order. 17) The above specifications are desired minimum. However, higher specification in regard to the base specification,(matched nearest higher side specification) may be appreciated for consideration. 18) Purchase order will be issued as and when the need arise. Bidders are bound to supply the required quantity during contract period. Payment of items will be made after successful installation and inspection procedures. 19) The university may arrange a technical discussion meet to clarify technical queries & all parties submitting quotations are to remain present in the meeting where at final offer on university demand for items selected by university after technical

4 discussion. The parties may be asked to offer final price for items asked for by university. 20) For any matter in this regard the direction of Registrar will be final and binding to all the concerned parties. 21) The Tenderer should invariably submit his tender in three sealed covers separately namely (1) E.M.D covers (2) Technical bid cover. (3) Commercial bid. 22) Technical bid cover should contain along with attested copies of GST and CST registration certificate, and copy of VAT Return 23) Tenderer should also furnish the details on nature of constitution of their firm; names and addresses of the partners/ proprietors/directors and also the details of sister concerns if any. Also specify details or documents requested in tender enquiry. 24) In case of a refusal to execute the work by the successful bidder, the security deposit shall be forfeited. 25) Bidder must provide escalation matrix for supply and warranty related matters including contact details. Name of Tenderer : Address : Ph. No. : Mobile /Fax / No. : Sign &seal of party

5 Annexure - 1 Technical Parameter for Ultrasonic probe sonicator: Sr.No Parameter Range 1 Ultrasound frequency KHZ 2 Power 0-250W 3 Probe 3, 6, 9, 12nm 4 Cushing Capacity ml 5 Timer yes 6 Pulse mode pulse 7 Sound abating chamber yes 8 Amplitude control 0-100% 9 Display LCD/LED Annexure-2 Technical Parameter for Digital Automatic Polarimeter: Sr.No Parameter Range 1 Measurement Range , -120 Z Z 2 Minimum Reading Z and 0.01 Z 3 Repeatability (Standard Deviation) < Minimum sample transmittance 1 % 5 Accuracy : +(0.01 Z + Measurement value 0.05 %) +(0.03 Z+ Measurement value 0.05 %) 6 Display LCD/LED 7 Interface RS 232