LABEL INSPECTION. ftsystem.com

Transcription

1 LABEL INSPECTION ftsystem.com

2 Ideal to ensure the presence of opaque or partially transparent labels applied on any type of container, whether partial or wraparound. Label control CE600-SE / CE600-VA / CE600-CR MAIN FUNCTIONS The configuration of the label presence system is defined according to the type of container and label applied STANDARD INSPECTION [depending to the configurations] LABEL PRESENCE LABEL COLOR FEATURES Optical sensors technology The control of semi-transparent labels is based on advanced Smart-Sensor No change to the existing line for installation Can be remotated and integrated in the interface of other controls Can be integrated within the labeller in the case of partial labels Can be installed on conveyor in the case of wraparound or sleeve label 700 Series HMI [Advanced model] 600 Series HMI [Basical model] ADVANTAGES IMPROVE PRODUCTIVITY Reduction of the number of rejects in case of malfunctioning of the labeller through the control on consecutive rejects IMPROVE QUALITY Eliminate customer complaints related to label absence Ensureproduct quality Label presence with sensors Principle Label presence with sensors Label presence with Smart Sensor Principle Label presence with Smart Sensor TYPE OF CONTAINER All types of closures, all types of containers with at least 5% of transparency Feasibility and accuracy of the system indicated in the FT System s official Technological Warranties Label Presence 2 Sensors Conf. [Opaque Label surface more of 60%] 19

3 Label inspection IE720-1VA / IE720-2VA IE730-1VA / IE730-2VA Ideal to ensure the quality of the labelling as regards the correct positioning, compliance with the format being produced and integrity of the labels of each type, including opaque and partially transparent labels applied on any type of container, whether partial or wraparound. MAIN FUNCTIONS The configuration of the inspection system more suitable varies according to the specific inspection and the degree of precision required to meet the customer s needs STANDARD INSPECTION [depending to the configurations] LABEL PRESENCE LABEL POSITIONING (VERTICAL, HORIZONTAL, ROTATION) CONFIRMATION OF CORRECT LABEL* LABEL QUALITY/INTEGRITY* CODE INTEGRITY (LOT, EXPIRATION DATA)* CODE READING (BARCODE, DATAMATRIX, QR-CODE)* Clear and intuitive interface Easy graphical settings FEATURES Machine vision technology Configurable with 1 or 2 cameras Specific lighting for maximum visibility of defects No change to the existing line for installation Can be integrated inside the labeller Front/back labels inspection acquisition Principle Front/back labels inspection ADVANTAGES IMPROVE PRODUCTIVITY Reduction of the number of rejects in case of malfunctioning of the labeller through the control on consecutive rejects Optimization of the adjustment and maintenance of the labeller IMPROVE QUALITY Eliminate customer complaints related to label wrong positioning Guarantee of correct labelling Guarantee of label integrity, compliance, correct codes printing on the labels Ensureproduct quality Label presence control acquisition Principle labels presence control TYPE OF CONTAINER All types of labels opaque or partially transparent * (In association with the correct configuration of the sensors) * Only advanced version. The advanced version inspect partial non-wraparound labels (e.g.: Front/back Feasibility and accuracy of the system indicated in the FT System s official Technological Warranties Acquisition [ in-machine] Principle in-machine 20

4 Ideal to ensure the total quality of the labelling as regards the correct positioning, compliance with the format being produced and integrity of the labels of each type, including opaque and partially transparent labels applied on any type of rounded shape container, whether partial or wraparound. 3D Full Label inspection IE4000-4VA MAIN FUNCTIONS The labelling inspector with 3D technology uses 4 industrial cameras system that creates a REAL RECON- STRUCTION of a 3D MODEL REAL RECONSTRUCTION which does not require bottles orientation STANDARD INSPECTION [depending to the configurations] LABEL PRESENCE LABEL POSITIONING (VERTICAL, HORIZONTAL, ROTATION) CORRECT AXIAL POSITION BETWEEN LABELS CORRECT POSITIONING OF LABELS AGAINST THE EMBOSSED ELEMENTS OF THE BOTTLES CONFIRMATION OF CORRECT LABEL LABEL QUALITY/INTEGRITY ABSENCE OF DEFECTS IN THE WELDING AREA OF SLEEVE LABELS COMPLIANCE OF CAPSULE COLOR CAPSULE CORRECT POSITIONING CODE INTEGRITY (LOT, EXPIRATION DATA) CODE READING (BARCODE, DATAMATRIX, QR-CODE) Clear and intuitive interface Easy grapghical settings FEATURES Machine vision technology Real 3D reconstruction engine System independent of the containers orientation* Inspection of labelling of square or round based containers Simple and intuitive system for the creation of the formats, setting of the analysis in a graph, -based on the real-acquired image Automatic learning system for good product calibration values 4 synchronous cameras acquisition Principle Acquisition camera ADVANTAGES IMPROVE PRODUCTIVITY Reduction of the number of rejects in case of malfunctioning of the labeller through the control on consecutive rejects Optimization of the adjustment and maintenance of the labeller IMPROVE QUALITY Eliminate customer complaints related to label wrong positioning Guarantee of correct labelling (positioning and printing) Guarantee of label integrity, compliance, correct codes printing on the labels Ensureproduct quality 3D modeling Principle Dome for uniform lighting TYPE OF CONTAINER Round or square based containers completely labelled * Different configurations and precision for cylindrical bottles and squred based bottles Feasibility and accuracy of the system indicated in the FT System s official Technological Warranties First reconstruction Final reconstruction 21

5 WE HAVE YOUR SOLUTION HAS A COMPLETE RANGE OF CONTROL AND INSPECTION SYSTEMS in order to ensure the high quality of your product allowing the optimization of your production reducing costs FOR YOUR... PLASTIC LINE Monitoring Fill level Leak Ctrl. [Squeezer] Ejector Organic Residure FILLER CAPPER Shape Cap Quality (QT) Capping PCS700 Leak Detection Pressure/Vacuum [Laser spectroscopy for pressure measurement in line] Diverter QCS Blown bottle Checkweigher Coding Labelling BLOW MOLDER Shrinkwrapper Bundel Boxing LABELLER Preform FOR YOUR... GLASS LINE Empty bottle Diverter Monitoring Fill level Leak/Pressure [Acoustic/Sound] FILLER CAPPER PASTEURIZER WASHER Cap Quality (QT) Capping PCS700 Leak Detection Pressure/Vacuum [Laser spectroscopy for pressure measurement in line] Ejector Checkweigher Coding Labelling Shape Shrinkwrapper Bundel, Boxing LABELLER FOR YOUR... CANS LINE Monitoring Fill level Pressure Ctrl. Ceckweigher for single product FILLER SEAMER PASTEURIZER Ejector Diverter Checkweigher Coding Empty Cans Shrinkwrapper Bundel Boxing FOR YOUR... LABORATORY CO 2 Content analysis O 2 Content analysis CO 2 + O 2 Content analysis 3

6 Via Leonardo Da Vinvi Alseno (PC) - ITALY Ph Fax commercial@ftsystem.com CONTROL & INSPECTION FOR YOUR BOTTLING AND PACKAGING LINE Founded in 1998, has specialised in the design and production of quality control monitoring systems along the entire bottling and packaging line. From the inspection of empty containers and caps to the fill levels, from the accurate capping to the leakage detection, from measuring the internal pressure of the container to the weight control, the label checking to laboratory analysis, guarantees the quality of your packaging products by optimising production and cost reduction. INTEGRATED AND TOTAL QUALITY SOLUTIONS The simple and intuitive multiple inspection stations along the entire packaging process can also be integrated into a single control panel for a total overview of the quality and production performance. CONSTANT RESEARCH The heart of is its R & D team, assisted by a developed network of partnerships with universities and international research centers, dedicated to the most innovative and non-destructive inspection technologies: high frequency, X-ray, infrared, optical, laser, artificial acoustic and visual analysis. GAS SENSING L PRO-GAS SENSING is a patented technology dedicated to laser spectroscopy. A revolutionary and innovative method, which has enabled the design and the realization of nondestructive instruments of analysis and measurement of gas inside closed containers. The main fields of application of L PRO technology are the bottling of wine, beer, water and soft drinks and even the wider industry and pharmaceutical industry. 1

7 ftsystem.com arol.com lpro.it unimac-gherri.com FRANCE UK, IRELAND DEUTSCHLAND HEADQUARTER Via L. Da Vinci, ALSENO - ITALY AROL HEADQUARTER Viale Italia, CANELLI - ITALY AROL BÉZIERS CHALLES LES EAUX ESPAÑA AROL BARCELONA BARCELONA FRANCE ITALY L-PRO HEADQUARTER Via del lavoro, 1/ CAMISANO VICENTINO - ITALY UK, IRELAND HALSTEAD [U.K.] ESPAÑA UniMac GHERRI HEADQUARTER Str. per Barco, 4/G MONTECCHIO EMILIA - ITALY DEUTSCHLAND VIERNHEIM USA, CANADA AROL BUFORD [GEORGIA U.S.A.] PEMBROKE [MASSACHUSETTS - U.S.A.] MEXICO, CENTRAL AMERICA USA CANADA EUROPE CUAJIMALPA MEXICO CENTRAL AMERICA AFRICA INDIA CHINA BRAZIL, SOUTH AMERICA LAPA, SAN PAOLO CHINA BRAZIL SOUTH AMERICA SHANGHAI INDIA PUNE, MAHARASHTRA WORLDWIDE AFRICA BÉZIERS [FR]