SELÇUK KARABATI. Professor of Operations Management. Koç University, College of Administrative Sciences and Economics.

Transcription

1 SELÇUK KARABATI Professor of Operations Management Koç University College of Administrative Sciences and Economics 34450, Sarıyer, İstanbul, Turkey Phone: + 90 (212) Facsimile: + 90 (212) URL: skarabati skarabati@ku.edu.tr Education August 1992 May 1989 June 1987 June 1982 The University of Texas at Austin, Austin, Texas. Ph.D. in Business Administration. Major Area: Operations Management. Minor Area: Industrial Engineering. Dissertation Topic: Design and Operational Problems in Flow Lines. Dissertation Advisor: Dr. Panagiotis Kouvelis. University of Southern California, Los Angeles, California. Master of Science in Industrial and Systems Engineering. Master s Thesis: Flexible Manufacturing Systems (FMS): Design and Operational Problems. Boğaziçi University, İstanbul, Turkey. Bachelor of Science in Industrial Engineering. Galatasaray Lyceum, İstanbul, Turkey. Academic Positions 06/2004 Professor of Operations Management 11/ /2004 Associate Professor of Operations Management 08/ /1998 Assistant Professor of Operations Management 08/ /1995 Assistant Professor of Operations Management Bilkent University, Management Department, Bilkent, Ankara, Turkey 08/ /2010 Visiting Scholar in Operations Management McCombs School of Business, University of Texas at Austin 01/ /2003 Visiting Scholar in Decision and Information Sciences Warrington College of Business, University of Florida 08/ /2002 Visiting Scholar in Operations Management The Boeing Center for Technology, Information & Manufacturing, Olin School of Business, Washington University in St. Louis 1

2 Administrative Positions Honors 08/2010 Vice President for Academic Affairs Koç University. 07/ /2008 Associate Dean Scholarship Award for Graduate Studies: Scholarship received upon nomination by the Industrial Engineering Department, Boğaziçi University, İstanbul, Turkey. Publications in Refereed Journals Pricing and Lot-Sizing Decisions in a Two-Echelon System with Transportation Costs, with Can Yıldırmaz and Serpil Sayın, OR Spectrum, Vol. 31, No. 3, , A Method for Estimating Stock-Out Based Substitution Rates by Using Point-of-Sale Data, with Ömer Cem Öztürk and Barış Tan, IIE Transactions, Vol. 41, No. 5, , Optimal Quantity Discount Design with Limited Information Sharing, with Panos Kouvelis, Decision Sciences, Vol. 39, No. 4, , Single-Supplier/Multiple-Buyer Supply Chain Coordination with Vertical Information Sharing, with Serpil Sayın, European Journal of Operational Research, Vol. 187, , Assigning Cross-Trained Workers to Departments: A Two-Stage Optimization Model to Maximize Utility and Skill Improvement, with Serpil Sayın, European Journal of Operational Research, Vol. 176, No. 3, , February Minimizing Sum of Completion Times on a Single Machine with Sequence-Dependent Family Setup Times, with Can Akkan, Journal of the Operational Research Society, Vol.57, No. 3, , March The Two-Machine Flowshop Total Completion Time Problem: Improved Lower Bounds and a Branch-and-Bound Algorithm, with Can Akkan, European Journal of Operational Research, Vol. 159, No. 2, , December Can the Desired Service Level be Achieved When the Demand and Lost Sales are Unobserved? with Barış Tan, IIE Transactions, Vol. 36, No. 4, April Assembly Line Balancing in a Mixed-Model Sequencing Environment with Synchronous Transfers, with Serpil Sayın, European Journal of Operational Research, Vol. 149, No. 2, , September A Min-Max-Sum Resource Allocation Problem and its Applications, with P. Kouvelis and G. Yu, Operations Research, Vol. 49, No. 6, , November-December Modelling and Scheduling of an Asynchronous Cyclic Production Line with Multiple Part, with Barış Tan, Journal of the Operational Research Society, Vol. 51, No. 11, , November Part Transfer Mode Selection in a Cyclic Mixed-Model Line, IEEE Transactions on Robotics and Automation, Vol. 16, No 5, , October

3 A Min-Sum-Max Resource Allocation Problem, with P. Kouvelis, IIE Transactions, Vol. 32, No 3, , Cyclic Scheduling in Synchronous Production Lines, with P. Kouvelis, IIE Transactions, Vol. 31, No 8, , August A Bicriteria Approach to the Two Machine Flow Shop Scheduling Problem, with Serpil Sayın, European Journal of Operational Research, Vol. 113, , Stochastic Cyclic Scheduling Problem in Synchronous Assembly and Production Lines, with Barış Tan, Journal of the Operational Research Society, Vol. 49, No. 11, , Flow Line Scheduling Problem with Controllable Processing Times, with P. Kouvelis, IIE Transactions, Volume 29, No 1, January Measuring Service Quality: Evaluation of a Method, with C. M. Alpaslan, Industrial Engineering Journal of Chamber of Turkish Engineers, Vol. 7, No 1 January-February 1996 (in Turkish). Cyclic Scheduling in Flow Lines: Modeling Observations, Effective Heuristics, and a Cycle Time Minimization Procedure, with P. Kouvelis, Naval Research Logistics, Vol. 43 pp , Marketing Manufacturing Interface, with Mehmet Paşa, Industrial Engineering Journal of Chamber of Turkish Engineers, Vol. 5, No 5 September-October 1995 (in Turkish). The Discrete Resource Allocation Problem in Flow Lines, with P.Kouvelis and G. Yu, Management Science, Vol. 41, No 9, September The Interface of Buffer Design and Cyclic Scheduling Decisions in Deterministic Flow Lines, with P. Kouvelis, Annals of Operations Research, Vol. 50, The Permutation Flow Shop Scheduling Problem with Sum of Completion Times Performance Criterion, with P. Kouvelis, Naval Research Logistics, Vol. 40, (1993), Exact and Approximate Algorithms for the Loop Layout Problem, with A. Ş. Journal of Production Planning and Control, Vol. 4, No.3 (1993), Kıran, A Location Problem on Unicyclic Networks: Balanced Case, with A. Ş. Kıran and A. T. Ünal, European Journal of Operational Research, 62 (1992), Games, Critical Paths and Assignment Problems in Permutation Flow Shops and Cyclic Scheduling Flow Line Environments, with P. Kouvelis and A. Ş. Kıran, Journal of the Operational Research Society, Vol. 43, No. 3 (1992), Scheduling in Flexible Manufacturing Systems, with A. Ş. Kıran, Industrial Engineering Journal of Chamber of Turkish Engineers, Vol. 1, (4), 3-9, November 1989 (in Turkish). Working Papers Project Selection Problem in Knowledge Intensive Environments: A Human Resources Perspective, with Serpil Sayın, and Eda Kaya. Retail Inventory Management with Stock-Out Based Dynamic Demand Substitution, with Barış Tan. 3

4 Pricing and Scheduling with Multiple Products and Non-Cooperative Agents. Books Competitive Strategies and Business Excellence in the Turkish Appliance Sector Part and Component Suppliers Industry, with G. Ulusoy, A. Toker, G. Barbarosoğlu, and İ. İkiz, (in Turkish), Competitiveness Strategies Series No. 5, TÜSİAD, İstanbul, Publications in Proceedings A Two-Stage Decentralized Supply Chain with Limited Capacity and Limited Information Sharing, with Alper Altan and Fikri Karaesmen, Proceedings of the Analysis of Manufacturing Systems Conference, May 11-16, 2007, Lunteren, The Netherlands. Assembly Line Balancing in a Mixed-Model Sequencing Environment, with Serpil Sayın, Proceedings of the Seventh International Workshop on Project Management and Scheduling, April 17-19, 2000, Osnabruck, Germany. Sequencing and Part Transfer Mode Selection in a Mixed-Model Production Line, Proceedings of the Sixth International Workshop on Project Management and Scheduling, July 7-9, 1998, İstanbul, Turkey. Effects of Variability on the Performance of a Production Line Under Cyclic Scheduling, with Barış Tan, Proceedings of the 1997 European Simulation Multiconference, Ed. A.R. Kaylan and A. Lehmann, pp , Games, Critical Paths and Assignment Problems in Permutation Flow Shops and Cyclic Scheduling Flow Line Environments, with P. Kouvelis and A. Ş. Kıran, Proceedings of the DSI Conference, Miami Beach, Florida, November Presentations Capacity Allocation and Scheduling with Multiple Products, POMS, Vancouver, May Management of a Multi-Item Inventory System with Stock-Out-Based Substitutions, POMS, Orlando, May Pricing and Lot Sizing Decisions in a Two-Echelon Supply Chain with Transportation Costs, EURO, Prague, July Estimating Product Substitution Rates in a Retail Setting, POMS, Boston, April Single-Supplier/Multiple-Buyer Supply Chain Coordination with Vertical Information Sharing, EURO, Rhodes, July Two-Stage Supply Chain Coordination with Economies of Scale and Limited Information Sharing, EURO/INFORMS, İstanbul, July 10, Two-Stage Supply Chain Coordination with Economies of Scale and Limited Information Sharing, Supply Chain Optimization Conference, University of Florida, Gainesville, Florida, February 27,

5 Two-Stage Supply Chain Coordination with Economies of Scale and Limited Information Sharing, Weatherhead School of Management, Case Western Reserve University, February 20, The Two-Machine Flowshop Total Completion Time Problem: Improved Lower Bounds and a Branch-and-Bound Algorithm, INFORMS Annual Meeting, San Jose, California, November 17-20, Can the Desired Service Level be Achieved When the Demand and Lost Sales are Unobserved? with Barış Tan, EURO 2001, The European Operational Research Conference, July 9-11, 2001, Erasmus University, Rotterdam, the Netherlands. Assembly Line Balancing in a Mixed-Model Sequencing Environment, Seventh International Workshop on Project Management and Scheduling, April 17-19, 2000, Osnabruck, Germany. Part Transfer Mode Selection in a Mixed-Model Line, (in Turkish), XXth National Conference of Operational Research and Industrial Engineering, June 8-9, 1999, Kara Harp Okulu, Ankara. Sequencing and Part Transfer Mode Selection in a Mixed-Model Production Line, Sixth International Workshop on Project Management and Scheduling, July 7-9, 1998, İstanbul, Turkey. Sequencing and Line Balancing in Mixed-model Assembly Lines, (in Turkish), with Serpil Sayın, XIXth National Conference of Operational Research and Industrial Engineering, June 25-26, 1998, Middle East Technical University, Ankara. Cyclic Scheduling in Synchronous Assembly Lines, with Panos Kouvelis, INFORMS, Spring 1997, San Diego, U.S.A. Cyclic Scheduling and Performance Improvement in Synchronous Assembly Lines, with Panos Kouvelis, Washington University, Olin School of Business, St. Louis, Missouri, April 28, Cyclic Scheduling Problem on Stochastic Synchronous Production Lines, (in Turkish), with Barış Tan, XVIIIth National Conference of Operational Research and Industrial Engineering, October 23-25, 1996, Istanbul Technical University, Istanbul. Scheduling and Design of Paced Assembly Lines, with P. Kouvelis, INFORMS National Meeting, Washington, D.C., May A Class of Resource Allocation Problems with Applications to Planning and Scheduling, with P. Kouvelis and G. Yu, TIMS/ORSA National Meeting, Boston, Massachusetts, April The Discrete Resource Allocation Problem in Flow Lines, with P. Kouvelis and G. Yu, TIMS/ORSA National Meeting, Chicago, Illinois, May The Interface of Cyclic Scheduling and Buffer Design Issues in Deterministic Flow Lines, with P. Kouvelis, ORSA/TIMS National Meeting, Anaheim, California, November 1991 (Invited Session). Games, Critical Paths and Assignment Problems in Permutation Flow Shops and Cyclic Scheduling Flow Line Environments, with P. Kouvelis and A. Ş. Kıran, ORSA/TIMS National Meeting, Nashville, Tennessee, May 1991 (Invited Session). 5

6 A New Modeling Framework and an Efficient Branch-and-Bound Procedure for the Permutation Flow Shop Scheduling Problem with Sum of Completion Times Performance Criterion, with P. Kouvelis, ORSA/TIMS National Meeting, Nashville, Tennessee, May 1991 (Invited Session). Flow Shop Design and Scheduling, with A. Ş. Kıran, ORSA/TIMS National Meeting, Las Vegas, Nevada, May Scheduling in Flexible Manufacturing Systems, with A. Ş. Kıran, Invited Paper, 12th National Meeting of the Operations Research Society of Turkey, Bilkent University, Ankara, Turkey. June Awards Best Paper Award, Effects of Variability on the Performance of a Production Line Under Cyclic Scheduling, with Barış Tan, 11th European Simulation Multiconference, June 1-4, 1997, Istanbul. Editorial Activities Senior Editor, Production and Operations Management, 2004 Associate Editor, IIE Transactions on Scheduling and Logistics, Supply Chains/Production- Inventory Systems Department, Proceedings Co-Editor, Proceedings of the Sixth International Workshop on Project Management and Scheduling, July 7-9, 1998, İstanbul, Turkey. Special Issue Co-Editor, Journal of Global Optimization, Special Issue on Optimization Applications in Scheduling Theory. Special Issue Co-Editor, European Journal of Operational Research, Special Issue on Sixth International Workshop on Project Management and Scheduling. Professional Services Organizing Committee Member, 25th Operational Research/Industrial Engineering National Meeting, July 4-6, 2005, İstanbul, Turkey. Organizing Committee Member, Sixth International Workshop on Project Management and Scheduling, July 7-9, 1998, İstanbul, Turkey. Reviewer, IIE Transactions, Operations Research, European Journal of Operational Research, IEEE Transactions for Robotics and Automation, Journal of Scheduling, Journal of the Operational Research Society. 6

7 Teaching/Research Experience 09/95- Koç University, Faculty of Administrative Sciences and Economics. MATH 201 Introduction to Statistics OPSM 301 Operations Management OPSM 305 Supply Chain Management OPSM 410 Operations Strategy OPSM 450 Selected Topics: Designing, Managing, and Improving Operations STAT 501 Statistics (MBA program) OPSM 502 Operations Management (MBA program) OPSM 637 Operations Strategy (MBA program) OPSM 638 Supply Chain Management (MBA program) OPSM 901 Operations Management (Executive MBA program) 09/92-08/95 Bilkent University, Faculty of Business Administration. Assistant Professor: MAN 341 Production and Operations Management MAN 342 Production Scheduling and Control MAN 442 Service Operations Management MAN 549 Management of Quality (MBA program) 01/90-08/92 University of Texas at Austin, Management Department. Assistant Instructor: MAN 335 Operations Management Teaching Assistant: Assisted faculty in various courses: BA 380N Operations Management MAN 335 Operations Management (Honors Section) MAN Manufacturing Strategy MAN Design of Operational Systems Research Interests Applied Research Areas: Design and Planning Issues of Manufacturing Systems, Manufacturing Strategy, Interface of Design and Operational Problems in Flow Lines, Layout Design, Scheduling. Teaching Interests Production and Operations Management, Service Operations Management, Management of Quality, Supply Chain Management, Design of Operational Systems, Scheduling, Layout Design, Manufacturing Strategy. Professional Societies The Institute for Operations Research and Management Science (INFORMS). Turkish Operations Research Society (TORS). 7