ISO 3030:2011 Rolling bearings Radial needle roller and cage assemblies Boundary dimensions and tolerances E

Transcription

1 Standards published New International Standards published between 01 September and 30 September 2011 * Available in English only ** French version of standard previously published in English only Price group TC 4 Rolling bearings ISO 3030:2011 Rolling bearings Radial needle roller and cage assemblies Boundary dimensions and tolerances E TC 5 ISO ISO :2011 ISO ISO :2011 TC 6 ISO :2011 Ferrous metal pipes and metallic fittings * Cold-formed welded structural hollow sections of non-alloy and fine grain steels Part 1: Technical delivery conditions * Cold-formed welded structural hollow sections of non-alloy and fine grain steels Part 2: Dimensions and sectional properties * Hot-finished structural hollow sections of non-alloy and fine grain steels Part 1: Technical delivery conditions * Hot-finished structural hollow sections of non-alloy and fine grain steels Part 2: Dimensions and sectional properties Paper, board and pulps Paper and board Testing of cores Part 7: Determination of flexural modulus by the three-point method M N M N D ISO 12192:2011 Paper and board Determination of compressive strength Ring crush method E TC 8 ISO :2011 TC 12 ISO :2009/Cor TC 17 Ships and marine technology * Ships and marine technology Breathing apparatus for ships Part 2: Self-contained breathing apparatus for shipboard firefighters Quantities and units Quantities and units Part 1: General Technical Corrigendum 1 Steel H free ISO 630- * Structural steels Part 1: General technical delivery conditions for hot-rolled products F ISO 630-2:2011 * Structural steels Part 2: Technical delivery conditions for structural steels for general purposes G TC 20 Aircraft and space vehicles ISO 10785:2011 * Space systems Bellows Design and operation G ISO 10789:2011 * Space systems Programme management Information and documentation management H ISO/TS 12208:2011 * Space systems Space environment (natural and artificial) - Observed proton fluences over long duration at GEO and guideline for selection of confidence level in statistical model of solar proton fluences E

2 ISO :2011 * Space systems Programme management Part 2: Product assurance E TC 22 ISO 14572:2011 Road vehicles * Road vehicles Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables Test methods and requirements for basic- and high-performance cables J ISO 11096:2011 * Road vehicles Pedestrian protection Impact test method for pedestrian thigh, leg and knee ISO 15006:2011 TC 28 * Road vehicles Ergonomic aspects of transport information and control systems Specifications for invehicle auditory presentation Petroleum products and lubricants H ISO 377 Petroleum products Determination of base number Perchloric acid potentiometric titration method D ISO 20846:2011 TC 29 Petroleum products Determination of sulfur content of automotive fuels Ultraviolet fluorescence method Small tools F ISO 52 Machine chucking reamers with cylindrical shanks and Morse taper shanks C ISO 2296:2011 Metal slitting saws with fine and coarse teeth Metric series B ISO 675 Tools for moulding Ejector pins with cylindrical head C ISO 8693:2011 Tools for moulding Flat ejector pins C ISO 8694:2011 Tools for moulding Shouldered ejector pins B ISO :2011 Tools for pressing Wear plates for press dies Part 2: Type B B ISO Tools for pressing Punch holder shanks Part 1: Type A B ISO 18084:2011 Press tools for tablets Punches and dies G TC 33 Refractories ISO 12677:2011 Chemical analysis of refractory products by X-ray fluorescence (XRF) Fused cast-bead method W TC 34 ISO :2003/Amd Food products Microbiology of food and animal feeding stuffs Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 4: Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products Amendment 1 XZ ISO 17932:2011 Palm oil Determination of the deterioration of bleachability index (DOBI) and carotene content D TC 37 Terminology and other language and content resources ISO :2011 * anguage resource management Feature structures Part 2: Feature system declaration T TC 38 Textiles ISO 9092:2011 * Textiles Nonwovens Definition A TC 42 Photography ISO 18920:2011 * Imaging materials Reflection prints Storage practices ISO 18930:2011 TC 44 ISO :2000/Amd * Imaging materials Pictorial colour reflection prints Methods for evaluating image stability under outdoor conditions Welding and allied processes Welding consumables Test methods Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys Amendment 1 H XZ

3 ISO :2011 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding G ISO 17654:2011 Resistance welding Destructive tests of welds Pressure test of resistance seam welds B ISO Health and safety in welding and allied processes Sampling of airborne particles and gases in the operator's breathing zone Part 1: Sampling of airborne particles Q ISO :2011 Health and safety in welding and allied processes aboratory method for sampling fume and gases Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas chromatography-mass spectrometry G TC 45 ISO 3994:2007 Rubber and rubber products Plastics hoses Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials Specification G ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications Specification D ISO 36:2011 Rubber, vulcanized or thermoplastic Determination of adhesion to textile fabrics D ISO 188:2011 Rubber, vulcanized or thermoplastic Accelerated ageing and heat resistance tests K ISO 1817:2011 Rubber, vulcanized or thermoplastic Determination of the effect of liquids H ISO 2878:2011 Rubber, vulcanized or thermoplastic Antistatic and conductive products Determination of electrical resistance D ISO 6943:2011 Rubber, vulcanized Determination of tension fatigue J ISO 14309:2011 * Rubber, vulcanized or thermoplastic Determination of volume and/or surface resistivity G TC 58 ISO 11513:2011 ISO/TR TC 59 Gas cylinders * Gas cylinders Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging (excluding acetylene) Design, construction, testing, use and periodic inspection * Gas cylinders - Guidance for design of composite cylinders Part 1: Stress rupture of fibres and burst ratios related to test pressure Buildings and civil engineering works H ISO 9836:2011 * Performance standards in building Definition and calculation of area and space indicators K TC 61 ISO 15063:2011 TC 67 Plastics * Plastics Polyols for use in the production of polyurethanes Determination of hydroxyl number by NIR spectroscopy Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries N ISO 15546:2011 * Petroleum and natural gas industries Aluminium alloy drill pipe S ISO 12490:2011 * Petroleum and natural gas industries Mechanical integrity and sizing of actuators and mounting kits for pipeline valves U ISO :2011 * Petroleum and natural gas industries Design and operation of subsea production systems Part 15: Subsea structures and manifolds V TC 72 Textile machinery and accessories ISO 13435:2011 * Textile machinery and accessories Bars for drop wires for electrical warp stop motions B TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use ISO :2011 Injection containers and accessories Part 4: Injection vials made of moulded glass D ISO Infusion equipment for medical use Part 1: Infusion glass bottles D

4 TC 83 Sports and recreational equipment ISO 5912:2011 Camping tents ISO 10966:2011 Sports and recreational equipment Fabrics for awnings Specification C TC 85 Nuclear energy, nuclear technologies, and radiological protection ISO 11320:2011 Nuclear criticality safety Emergency preparedness and response E TC 102 Iron ore and direct reduced iron ISO 3087:2011 * Iron ores Determination of the moisture content of a lot J TC 106 Dentistry ISO :2011 Dentistry Endodontic instruments Part 5: Shaping and cleaning instruments D TC 107 Metallic and other inorganic coatings ISO 12679:2011 * Thermal spraying Recommendations for thermal spraying G TC 110 Industrial trucks ISO 2328:2011 Fork-lift trucks Hook-on type fork arms and fork arm carriages Mounting dimensions C ISO TC 126 Industrial trucks Safety requirements and verification Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks Tobacco and tobacco products S ISO 6565:2011 Tobacco and tobacco products Draw resistance of cigarettes and pressure drop of filter rods Standard conditions and measurement TC 135 ISO TC 138 Non-destructive testing Non-destructive testing Industrial computed radiography with storage phosphor imaging plates Part 1: Classification of systems Plastics pipes, fittings and valves for the transport of fluids M ISO Plastics piping systems for renovation of underground gas supply networks Part 1: General G ISO :2011 ISO 23228:2011 TC 147 Plastics piping systems for renovation of underground gas supply networks Part 3: ining with close-fit pipes * Thermoplastics pipes for the conveyance of fluids Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens Water quality G E ISO 1316 Water quality Measurement of polonium 210 activity concentration in water by alpha spectrometry H TC 160 Glass in building ISO * Glass in building Coated glass Part 1: Physical defects D ISO :2011 * Glass in building Coated glass Part 2: Colour of façade D TC 172 ISO :2011 Optics and photonics * Optics and optical instruments Test methods for telescopic systems Part 8: Test methods for nightvision devices ISO asers and laser-related equipment Determination of laser resistance of tracheal tubes Part 1: Tracheal tube shaft E TC 178 ifts, escalators and moving walks

5 ISO/TS :2011 ISO/TS :2011 TC 184 ISO :2009/Cor ISO TC 188 * Safety requirements for lifts (elevators) Part 3: Global conformity assessment procedures (GCAP) Prerequisites for certification of conformity of lift systems, lift components and lift functions * Safety requirements for lifts (elevators) Part 4: Global conformity assessment procedures (GCAP) Certification and accreditation requirements Automation systems and integration * Industrial automation systems and integration Product data representation and exchange Part 235: Application protocol: Engineering properties for product design and verification Technical Corrigendum 1 Advanced automation technologies and their applications Requirements for establishing manufacturing enterprise process interoperability Part 1: Framework for enterprise interoperability Small craft D E free Q ISO 1159 Small craft, engine-driven Field of vision from helm position E TC 190 Soil quality ISO :2011 * Soil quality Avoidance test for determining the quality of soils and effects of chemicals on behaviour Part 2: Test with collembolans (Folsomia candida) G ISO/TS :2011 Soil quality Determination of soil microbial diversity Part 2: Method by phospholipid fatty acid analysis (PFA) using the simple PFA extraction method D ISO 2890 * Soil quality Guidance for burial of animal carcasses to prevent epidemics N TC 207 Environmental management ISO 1405 * Environmental management Material flow cost accounting General framework R TC 211 ISO 19131:2007/Amd TC 216 Geographic information/geomatics Geographic information Data product specifications Amendment 1: Requirements relating to the inclusion of an application schema and feature catalogue and the treatment of coverages in an application schema. Footwear XZ ISO 20877:2011 Footwear Test methods for whole shoe Thermal insulation A TC 218 ISO 13059:2011 TC 229 Timber * Round timber Requirements for the measurement of dimensions and methods for the determination of volume Nanotechnologies C ISO/TS :2011 TC 234 * Nanotechnologies Vocabulary Part 7: Diagnostics and therapeutics for healthcare D Fisheries and aquaculture ISO 12875:2011 JTC 1 ISO/IEC 13156:2011 ISO/IEC TR 16167:2011 ISO/IEC 16317:2011 ISO/IEC 16353:2011 * Traceability of finfish products Specification on the information to be recorded in captured finfish distribution chains Information technology * Information technology Telecommunications and information exchange between systems High rate 60 GHz PHY, MAC and PAs * Information technology Telecommunications and information exchange between systems Next Generation Corporate Networks (NGCN) Emergency calls * Information technology Telecommunications and information exchange between systems proxzzzy for sleeping hosts * Information technology Telecommunications and information exchange between systems Front-end configuration command for NFC-WI (NFC-FEC) N XF Q M B

6 ISO/IEC TR 26927:2011 * Information technology Telecommunications and information exchange between systems Corporate telecommunication networks Mobility for enterprise communications P ISO/IEC * Information technology Open systems interconnection Part 1: Object identifier resolution system K ISO/IEC :2011 * Information technology Open systems interconnection Part 2: Procedures for the object identifier resolution system operational agency D ISO/IEC 14882:2011 * Information technology Programming languages C++ X ISO/IEC 16963:2011 * Information technology Digitally recorded media for information interchange and storage Test method for the estimation of lifetime of optical media for long-term data storage P ISO/IEC ISO/IEC * Information technology UPnP Device Architecture Part 1: UPnP Device Architecture Version 1.0 V * Information technology UPnP Device Architecture Part 1-1: UPnP Device Architecture Version 1.1 XA ISO/IEC :2011 4: : : :2011 ISO/IEC :2011 ISO/IEC :2011 ISO/IEC :2011 ISO/IEC :2003/Amd 4:2011 ISO/IEC :2003/Amd 6:2011 * Information technology UPnP Device Architecture Part 3-1: Audio Video Device Control Protocol Audio Video Architecture * Information technology UPnP Device Architecture Part 4-2: Audio Video Device Control Protocol evel 2 Media Renderer Device * Information technology UPnP Device Architecture Part 4-4: Audio Video Device Control Protocol evel 2 Audio Video Data Structures * Information technology UPnP Device Architecture Part 4-10: Audio Video Device Control Protocol evel 2 Audio Video Transport Service * Information technology UPnP Device Architecture Part 4-11: Audio Video Device Control Protocol evel 2 Connection Manager Service * Information technology UPnP Device Architecture Part 4-13: Audio Video Device Control Protocol evel 2 Rendering Control Service * Information technology UPnP Device Architecture Part 4-14: Audio Video Device Control Protocol evel 2 Scheduled Recording Service * Information technology UPnP Device Architecture Part 14-12: Audio Video Device Control Protocol evel 3 Audio Video Content Directory Service * Information technology UPnP Device Architecture Part 15-10: Content Synchronization Device Control Protocol Content Synchronization Service * Information technology UPnP Device Architecture Part 17-10: Quality of Service Device Control Protocol evel 3 Quality of Service Device Service * Information technology Multimedia content description interface Part 6: Reference software Amendment 4: Reference software for video signature tools * Information technology Multimedia content description interface Part 7: Conformance testing Amendment 6: Conformance testing for video signature tools K W S V XF XE X X XZ XZ ISO/IEC 19773:2011 * Information technology Metadata Registries (MDR) modules X ISO/IEC :2011 * Information technology Document Schema Definition anguages (DSD) Part 5: Extensible Datatypes J ISO/IEC :2011 * Information technology User interface icons Part 40: Management of icon registration E ISO/IEC 15897:2011 * Information technology User interfaces Procedures for the registration of cultural elements S ISO/IEC TS ISO/IEC TS :2011 * Information technology for learning, education and training Nomadicity and mobile technologies Part 1: Nomadicity reference model * Information technology for learning, education and training Nomadicity and mobile technologies Part 2: earner information model for mobile learning ISO/IEC :2011 * Information technology Biometric data interchange formats Part 6: Iris image data K

7 ISO/IEC :2011 * Information technology Biometric data interchange formats Part 9: Vascular image data K ISO/IEC :2010/Cor ISO/IEC :2011 ISO/IEC :2011 * Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC Part 4: Finger image data Technical Corrigendum 1 * Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC Part 6: Iris image data * Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC Part 7: Signature/sign time series data free E Q ISO/IEC 29164:2011 * Information technology Biometrics Embedded BioAPI S Standards confirmed The following International Standards are confimred for a five year period: TC 8 Ships and marine technology ISO 5489:2008 ISO :2008 TC 20 ISO 15887:2000 ISO 15888:2000 Aircraft and space vehicles ISO 21460:2007 ISO 22663:2007 ISO 14625:2007 ISO 15389:2001 ISO 16454:2007 ISO 22108:2008 ISO 23041:2007 TC 23 ISO 789-7:1991 ISO 789-8:1991 ISO 3965:1990 ISO 12368:2001 Tractors and machinery for agriculture and forestry ISO 10998:2008 ISO 21244:2008 ISO 26402:2008

8 TC 34 ISO 5549:1978 Food products ISO 22160:2007 ISO 22662:2007 ISO/TS 26844:2006 TC 35 Paints and varnishes ISO 17895:2005 ISO :2006 ISO :2006 TC 37 Terminology and other language and content resources ISO 639-5:2008 TC 38 Textiles ISO 2648:1974 ISO 3660:1976 ISO 3790:1976 ISO 4916:1991 ISO :2008 ISO 11092:1993 ISO :2001 TC 42 ISO 420:1994 ISO 422:1994 ISO 423:1994 ISO 424:1994 ISO 516:1999 ISO 2720:1974 ISO 3298:1994 ISO 3299:1994 ISO 3617:1994 ISO 3618:1994 ISO 3619:1994 ISO 3620:1994 ISO 3621:1994 ISO 3623:1994 ISO 3624:1994 ISO 3625:1994 ISO 3628:1994 ISO 5763:1989 ISO 6053:1979 Photography

9 ISO 8581:1994 ISO :1999 ISO 10636:1994 ISO 15740:2008 ISO 18917:1999 ISO 18919:1999 TC 46 Information and documentation ISO 2709:2008 TC 61 Plastics ISO 293:2004 ISO 294-3:2002 TC 85 ISO :1994 Nuclear energy, nuclear technologies, and radiological protection ISO :2008 ISO :2008 TC 91 ISO 2456:1986 ISO 2868:1973 ISO 2869:1973 Surface active agents ISO 2870:2009 ISO :2010 ISO :2010 ISO 4198:1984 ISO 4311:1979 ISO 4312:1989 ISO 4313:1976 ISO 4314:1977 ISO 4315:1977 TC 113 Hydrometry ISO 1438:2008 ISO 8368:1999 ISO 9827:1994 ISO 14139:2000 TC 146 Air quality ISO 16107:2007 ISO 16702:2007 ISO :2007 TC 155 Nickel and nickel alloys

10 ISO 22725:2007 TC 159 ISO 11226:2000 ISO :2000 ISO :2000 ISO :2000 TC 163 Ergonomics Thermal performance and energy use in the built environment ISO 13786:2007 ISO 13789:2007 ISO 8142:1990 TC 190 Soil quality ISO 23909:2008 ISO :2007 TC 218 ISO 3130:1975 TC 221 Timber Geosynthetics ISO 10321:2008 JTC 1 ISO/IEC :1994 ISO/IEC :2000 ISO/IEC :2000 ISO/IEC 16485:2000 Information technology Standards withdrawn Period from 01 September to 30 September 2011 TC 5 Ferrous metal pipes and metallic fittings ISO 630-2:2000 (replaced by ISO ) ISO :2000 (replaced by ISO :2011) ISO 4019:2001 (replaced by ISO :2011) ISO 10799:2001 (replaced by ISO ) TC 42 ISO/TR 18930:2001 Photography (replaced by ISO 18930:2011)

11 TC 44 ISO/TS :2006 TC 131 ISO/TS 13725:2001 TC 218 Welding and allied processes (replaced by ISO :2011) Fluid power systems (replaced by ) Timber ISO 4480:1983 (replaced by ISO 13059:2011)