Certification Exam Guide. Infor Certified M3 Sales Management & Logistics Consultant v13.3 Exam #: M3-SMLC13-110

Transcription

1 Certification Exam Guide Infor Certified M3 Sales Management & Logistics Consultant v13.3 Exam #: M3-SMLC13-110

2 Target Audience The exam targets the skills and abilities required by an M3 Sales Management & Logistics Consultant with relevant experience to successfully implement and configure customer solutions to meet the customer's business needs. Exam Details Exam number: M3-SMLC Onsite or Online, proctored 70 questions 90 minute time limit Schedule and Register Below are the steps to schedule and register for an onsite or online proctored exam. Onsite Prior to registering for an exam, please follow the steps below to register for your preferred exam date/time: 1. If required, create a new account by clicking here. 2. If you already have an account, login to Webassessor. 3. Click Register for an Exam. 4. Find the exam you wish to attempt. 5. Click Select next to the Onsite Proctored option. 6. Search for a test center or choose one of the closest test centers listed. 7. Select your preferred date and time to attempt the exam. (Test centers set their own testing schedules.) 8. Read and accept the Terms and Conditions and then click Select. 9. If you have a Voucher/Coupon code, enter the code and click Apply. 10. If the exam details are correct, click Checkout. 11. If using a credit card, choose your payment type and click Submit. 12. After confirming payment, click Done. 13. You will receive a confirmation with your Test Taker Authorization Code and additional onsite details. Please Note: Ensure you have your Test Authorization Code with you when you arrive at the test center. You cannot attempt your exam without the Test Authorization Code, and no refund will be provided. Please arrive at the test center at least 15 minutes prior to your scheduled exam. Parking and other test center specific instructions are included in your confirmation . Register here

3 Online Prior to registering for an exam, please follow the steps below at least 5 days prior to you preferred exam date/time: 1. Test your Internet connection. Run the test twice: once with the default server and then to a server in Arizona (e.g. Phoenix, AZ; Tempe AZ, Tucson, AZ; etc.) Results to an Arizona server must meet these minimum requirements: o Ping times must be less than 200ms o Jitter must be less than 50ms o Download and upload must be greater than 1Mbps 2. Ensure your computer meets other requirements outlined in this Guide. Some of the requirements are: o A webcam is required - built in webcams ARE permitted o A microphone is required - headsets are NOT permitted o Sentinel Secure software must be installed (MS Windows and MAC supported) 3. If you encounter any problems, contact Kryterion Support: o Voice: (U.S.) or (International) o Live Chat: then click on "LIVE HELP" o OLPsupport@KryterionOnline.com 4. If required, create a new account by clicking here. 5. If you already have an account, login to Webassessor. 6. Click Register for an Exam. 7. Find the exam you wish to attempt. 8. Click Select next to the Online Proctored option. 9. Select your preferred date and time to attempt the exam and click Select. 10. Read and accept the Terms and Conditions and then click Select. 11. If you have a Voucher/Coupon code, enter the code and click Apply. 12. If the exam details are correct, click Checkout. 13. If using a credit card, choose your payment type and click Submit. 14. After confirming payment, click Done. 15. You will receive a confirmation . Register here

4 Exam Topic Area Summary The following summarizes the percentage of each topic area included on the exam: Setup & Configuration - 84% Using - 16% Related Training and Documentation Although not required, the following training courses and documentation cover content included in this exam: Training courses found on Campus: M3: v13x Manufacturing Foundation M3: v13x Designing Mashups Advanced M3: v13x Configuring Warehouse Management and Distribution Orders M3: v13x Configuring Lot and Allocation Control M3: v13x Configuring Customer Orders Other documentation found on Infor Documentation Infocenter: M3 Supply Chain Execution User Guide Exam Objectives by Topic Area and Resource This certification exam includes the following exam objectives by topic and resource. Topic Area and Percentage Resource and related exam objective(s) Setup & Configuration Using 84% 16% M3: v13x Manufacturing Foundation Describe how Infor M3 is able to manage and integrate the activities within a manufacturing company Execute the main process flows in Infor M3. Explain the concepts of supply chain planning. M3: v13x Designing Mashups Advanced Localize a Mashup in a different language. M3: v13x Configuring Warehouse Management and Distribution Orders Generate a planned distribution order. Configure cross-docking. Configure order types. Create a dispatch policy and customer order type. Create dispatch policies. Create facilities warehouses internal addresses stock zones locations and containers. Define elements of the warehouse structure. Define item facility relationships. Define item types. Define item warehouse relationships.

5 Topic Area and Percentage Resource and related exam objective(s) Setup & Configuration Using Define key supporting item data for alternate units of measure related/alias items search groups and item hierarchy. Define package-based picking. Describe key design considerations and parameters related to the company and division relationships to the warehouse structure. Describe system-directed put-away. Describe the process of stock and item movement between locations. Describe the warehouse management process flow. Display, by item, the summarized balance identity at warehouse level or for all warehouses. Enter a distribution order and releasing the order for picking manually. Enter a distribution order and reporting picking lists automatically. Identify the main programs related to warehouse management configuration for supply chain execution. Manage dispatch handling when all the routines are controlled by the delivery number. Manage the picking order. Perform advanced manual packing (predefined packages). Perform goods receiving for distribution orders using item numbers. Perform goods receiving for distribution orders using SSCC numbers. Perform simple manual packing. Process a distribution order. Release the planned order. Report an item immediately put in to stock. Report and confirm dispatch. Report goods receipt at the receiving warehouse. Report system-guided pick and pack. Set the parameters related to dispatchable order types and dispatch policies. Use distribution share to split demand across warehouses. Use lead times to accurately manage the time it takes to acquire an item. Use pick resource planning. Work with event-based document control. M3: v13x Configuring Lot and Allocation Control Explain the ramifications related to various parameters and settings. Identify key design considerations for configuring lot and allocation control for supply chain execution. Test and verify various lot and allocation control settings using standard M3 functionality. M3: v13x Configuring Customer Orders Explain how to create additional information to be connected to a customer order (CO) Header. Explain how to set up customer item numbers and other aliases. Explain how to set up Customer Order Type field selections. 84% 16%

6 Topic Area and Percentage Resource and related exam objective(s) Setup & Configuration Using Explain how to set up line charges and a line charge model. Explain how to set up routes. Set up basic customer order settings. Set up customer order types. Set up discount structure. Set up dispatch policies. Set up key fields in the customer master file. Set up master agreements. Set up price lists. Set up promotions. M3 Supply Chain Execution User Guide Explain how to use Payment Proposals and Advance Payments to control deliveries. Explain up flow and down flow of changes to supply chain orders, i.e. date change or quantity change and what effect it has through the whole supply chain 84% 16% Questions and Help Additional Certification Program information is available at Additional information about Infor Education training courses is available at If you experience any issues when registering for a certification exam, please contact olpsupport@kryteriononline.com. If you need help registering for a training course, please contact: For Americas: EducationAmericas@infor.com For Europe, the Middle East and Africa: EducationEMEA@infor.com For Asia Pacific: EducationAPAC@infor.com

7 Sample Questions The sample questions below provide examples of the types of questions included on the certification exams delivered through the Webassessor testing platform. The correct answers are provided for reference purposes only in the following Key to Sample Questions section. Note: The Webassessor platform randomizes all certification question items and answer options during the exam. 1. Which one of the following Infor products integrates a wide range of disparate systems, providing a simple but powerful framework for managing business process flows, workflows, and alerts? A. Infor BI B. Infor Cloud C. Infor ION D. Infor Smart Office 2. You need to set the critical setting for the manufacturing order flow MO lead-time method which controls if the lead-time should be calculated by the system, or if a user needs to set it up manually? Which one of the following options is where you set this critical setting? A. Manufacturing Order Type. Open (PMS120) B. Product Structure. Open (PDS001) C. Item. Connect Facility (MMS003) D. Item. Connect Warehouse (MMS002) 3. Which two of the following are ways to enter the item quantity when using quick order entry? Choose 2 answers. A. Type the quantity in Item. Connect to Warehouse (MMS002/B) B. Type the quantity in Req/Distr Order. Open (MMS100/P) C. Type the quantity in the Trans qty bu/m field on (MMS100/N) D. Type the quantity in Req/Distr Order. Open Lines (MMS101/B) 4. Which one of the following best describes the purpose of using payment proposals? A. To create and process a list of invoices due payment B. To include approved and unapproved invoices for automatic payments C. To track invoices due for payment D. To create price agreements and discounts with suppliers 5. Select from the drop-down lists on the right the M3 program that corresponds with each description on the left. Use each option only once? A. This program allows you to connect the item to the warehouse. B. This program allows you to create a warehouse. C. D. E. This program allows you to set dispatch handling policy for the distribution order type. This program allows you to create a distribution order type. This program allows you to add details to the distribution order type. Note: In Webassessor the responses on the right display in a drop-down list box. Req/Dist Order Type. Open (CRS201) Dispatch Policy. Open (MWS010) Req/Dist Order Type. Open (CRS200) Warehouse. Open (MMS005) Item. Connect Warehouse (MMS002)

8 6. The warehouse personnel know all the item numbers for the items they receive. Which one of the following forms do they use to receive by item number? A. Goods Receipt DO/RO.Report (MWS440) B. Delivery.Open Toolbox (MWS410) C. Req/Distr Order.Open (MMS100) D. Item.Connect to Warehouse (MMS002) 7. Which three of the following activities are controlled by the dispatch policy? Choose 3 answers. A. Picking B. Printer control C. Packing D. Stock issues E. Customer charges 8. Which one of the following tools does the warehouse team use to access, view, and act upon orders and deliveries? A. Delivery toolbox B. Item data interface C. Business Intelligence D. Item toolbox 9. Which one of the following describes the distribution between two warehouses in Infor M3? A. Forward and backward scheduling B. Inbound and outbound logistics C. Internal and external warehousing D. Input and output control 10. Which three of the following statements best describe some of the main uses of joint delivery rules in allocation control management? Choose 3 answers. A. Configure the dispatch policy so release for allocation and picking lists are not activated. B. Rules can apply even when a line is not 100% allocated. C. Perform a check to see if a group of lines pass or fail for dispatch according to the joint delivery rules. D. Ensure delivery according to customer requirements prior to the release of the order. E. Allocate stock to an order even if joint delivery rules prevent shipment on an order. 11. Which one of the following programs can you use to define an item, globally, in the item master file? A. Interface Item Field Control. Open (MHS263) B. Item. Interface. Select Control Fields (MHS264) C. Item. Open (MMS001) D. Item. Connect Warehouse (MMS002) 12. Which three of the following items do you want to review when looking at the stock for an item at a specific location? Choose 3 answers. A. Item B. Location C. Part number D. Surplus balance E. Allocable net quantity

9 13. Which three of the following create a wave picking list? Choose 3 answers. A. Warehouse B. Dispatch policy C. Stock zone D. Warehouse equipment E. Order type 14. Which one of the following statuses on the Customer.Open (CRS610) form do you use to indicate the customer is approved? A. 10-Preliminary B. 11-Temp custom no C. 20-Definite D. 0 - Normal customer 15. Which one of the following describes why you should use multi-unit coordination (MUC) configuration when configuring distribution pricing? A. Use when a company will not be distributing products between warehouses B. Use when a company needs to install equipment within maintenance and process work orders for the return of excess materials to stock Use when a company consists of more than one legal unit, and products will be distributed between C. warehouses, invoking different costs D. Use when deliveries can be grouped together to optimize picking 16. Which one of the following describes the delivery type that you can include on orders likely to be delivered within a certain time period as part of distribution order processing to optimize transportation costs? A. Future B. Planned C. Assigned D. Same 17. Which one of the following fields is used to indicate if, and how, lot control is applied? A. Lot control management B. Restricted release C. Lot control method D. Lot number method 18. Which two of the following are key design considerations related to basic customer order settings? Choose 2 answers. A. The information that the customer wants to include on the Quot date check B. The information that the customer wants to include on the invoice C. The date to use as a check date for agreements D. The promotions that are valid for an order 19. Which one of the following programs do you use to enter an order charge? A. CO Type. Connect Charges (OIS013) B. CO Charge. Open (OIS030) C. CO Type. Open (OIS010) D. Customer. Connect Charge (OIS003)

10 20. Which one of the following options expands on item lot control rules on the Item. Connect to Warehouse (MMS002) record and is added to the specific lot number record for an item? A. Shelf life rules for calendar and shipment dates B. Dispatch policies on expiration and sales dates C. Shelf life rules for expiration and sales dates D. Re-inspection times and expiration dates

11 Key to Sample Questions The correct answers for the Sample Questions are provided here for reference purposes only. Note: The Webassessor platform does not provide correct answers/feedback during the exam. 1. Which one of the following Infor products integrates a wide range of disparate systems, providing a simple but powerful framework for managing business process flows, workflows, and alerts? A. Infor BI B. Infor Cloud C. Infor ION D. Infor Smart Office 2. You need to set the critical setting for the manufacturing order flow MO lead-time method which controls if the lead-time should be calculated by the system, or if a user needs to set it up manually? Which one of the following options is where you set this critical setting? A. Manufacturing Order Type. Open (PMS120) B. Product Structure. Open (PDS001) C. Item. Connect Facility (MMS003) D. Item. Connect Warehouse (MMS002) 3. Which two of the following are ways to enter the item quantity when using quick order entry?. Choose 2 answers. A. Type the quantity in Item. Connect to Warehouse (MMS002/B) B. Type the quantity in Req/Distr Order. Open (MMS100/P) C. Type the quantity in the Trans qty bu/m field on (MMS100/N) D. Type the quantity in Req/Distr Order. Open Lines (MMS101/B) 4. Which one of the following best describes the purpose of using payment proposals? A. To create and process a list of invoices due payment B. To include approved and unapproved invoices for automatic payments C. To track invoices due for payment D. To create price agreements and discounts with suppliers 5. Select from the drop-down lists on the right the M3 program that corresponds with each description on the left. Use each option only once? A. This program allows you to connect the item to the warehouse. B. This program allows you to create a warehouse. C. D. E. This program allows you to set dispatch handling policy for the distribution order type. This program allows you to create a distribution order type. This program allows you to add details to the distribution order type. Note: In Webassessor the responses on the right display in a drop-down list box. Item. Connect Warehouse (MMS002) Warehouse. Open (MMS005) Dispatch Policy. Open (MWS010) Req/Dist Order Type. Open (CRS200) Req/Dist Order Type. Open (CRS201)

12 6. The warehouse personnel know all the item numbers for the items they receive. Which one of the following forms do they use to receive by item number? A. Goods Receipt DO/RO.Report (MWS440) B. Delivery.Open Toolbox (MWS410) C. Req/Distr Order.Open (MMS100) D. Item.Connect to Warehouse (MMS002) 7. Which three of the following activities are controlled by the dispatch policy? Choose 3 answers. A. Picking B. Printer control C. Packing D. Stock issues E. Customer charges 8. Which one of the following tools does the warehouse team use to access, view, and act upon orders and deliveries? A. Delivery toolbox B. Item data interface C. Business Intelligence D. Item toolbox 9. Which one of the following describes the distribution between two warehouses in Infor M3? A. Forward and backward scheduling B. Inbound and outbound logistics C. Internal and external warehousing D. Input and output control 10. Which three of the following statements best describe some of the main uses of joint delivery rules in allocation control management? Choose 3 answers. A. Configure the dispatch policy so release for allocation and picking lists are not activated. B. Rules can apply even when a line is not 100% allocated. C. Perform a check to see if a group of lines pass or fail for dispatch according to the joint delivery rules. D. Ensure delivery according to customer requirements prior to the release of the order. E. Allocate stock to an order even if joint delivery rules prevent shipment on an order. 11. Which one of the following programs can you use to define an item, globally, in the item master file? A. Interface Item Field Control. Open (MHS263) B. Item. Interface. Select Control Fields (MHS264) C. Item. Open (MMS001) D. Item. Connect Warehouse (MMS002)

13 12. Which three of the following items do you want to review when looking at the stock for an item at a specific location? Choose 3 answers. A. Item B. Location C. Part number D. Surplus balance E. Allocable net quantity 13. Which three of the following create a wave picking list? Choose 3 answers. A. Warehouse B. Dispatch policy C. Stock zone D. Warehouse equipment E. Order type 14. Which one of the following statuses on the Customer.Open (CRS610) form do you use to indicate the customer is approved? A. 10-Preliminary B. 11-Temp custom no C. 20-Definite D. 0 - Normal customer 15. Which one of the following describes why you should use multi-unit coordination (MUC) configuration when configuring distribution pricing? A. Use when a company will not be distributing products between warehouses B. Use when a company needs to install equipment within maintenance and process work orders for the return of excess materials to stock C. Use when a company consists of more than one legal unit, and products will be distributed between warehouses, invoking different costs D. Use when deliveries can be grouped together to optimize picking 16. Which one of the following describes the delivery type that you can include on orders likely to be delivered within a certain time period as part of distribution order processing to optimize transportation costs? A. Future B. Planned C. Assigned D. Same 17. Which one of the following fields is used to indicate if, and how, lot control is applied? A. Lot control management B. Restricted release C. Lot control method D. Lot number method

14 18. Which two of the following are key design considerations related to basic customer order settings? Choose 2 answers. A. The information that the customer wants to include on the Quot date check B. The information that the customer wants to include on the invoice C. The date to use as a check date for agreements D. The promotions that are valid for an order 19. Which one of the following programs do you use to enter an order charge? A. CO Type. Connect Charges (OIS013) B. CO Charge. Open (OIS030) C. CO Type. Open (OIS010) D. Customer. Connect Charge (OIS003) 20. Which one of the following options expands on item lot control rules on the Item. Connect to Warehouse (MMS002) record and is added to the specific lot number record for an item? A. Shelf life rules for calendar and shipment dates B. Dispatch policies on expiration and sales dates C. Shelf life rules for expiration and sales dates D. Re-inspection times and expiration dates

15 641 Avenue of the Americas New York, NY infor.com About Infor Infor builds business software for specific industries in the cloud. With 16,500 employees and over 90,000 customers in more than 170 countries, Infor software is designed for progress. To learn more, please visit Copyright 2018 Infor. All rights reserved. The word and design marks set forth herein are trademarks and/or registered trademarks of Infor and/or related affiliates and subsidiaries. All other trademarks listed herein are the property of their respective owners. This document is provided for informational purposes only and does not constitute a commitment to you in any way. The information, products and services described herein are subject to change at any time without notice. INFDTP en-US