GSX14. Energy-Efficient Split System Air Conditioner Up to 15 SEER & 12.5 EER. Cooling Capacity : 18,000-60,000 BTU/h

Transcription

1 ooling apacity : 18,000-60,000 BTU/h Energy-Efficient plit ystem Air onditioner Up to 15 EE & 12.5 EE ontents Nomenclature... 2 Product pecifications... 3 Expanded ooling Data... 5 Performance Data AHI atings Wiring Diagrams Dimensions Accessories tandard Features Energy-efficient compressor ingle-speed condenser fan motor Factory-installed filter drier opper tube/aluminum fin coil ervice valves with sweat connections and easy-access gauge ports ontactor with lug connection Ground lug connection AHI ertified; ETL Listed abinet Features Heavy-gauge galvanized-steel cabinet with a louvered sound control top Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval teel louver coil guard Top and side maintenance access ingle-panel access to controls with space provided for field-installed accessories When properly anchored, meets the 2010 Florida Building ode unit integrity requirements for hurricane-type winds (Anchor bracket kits available.) * omplete warranty details available from your local dealer or at To receive the 10-ear Parts Limited Warranty, online registration must be completed within 60 days of installation. Online registration is not required in alifornia or Quebec /17 upersedes 3/17

2 Nomenclature G X AA ,5 6,7,8 9 10,11 Brand Engineering * G Goodman Brand Major & Minor revisions * Not used for inventory control. Product ategory plit ystem Electrical Unit Type 1-208/230 V, 1 Phase, 60 Hz X ondenser -410A apacity Z Heat Pump -410A 018-1½ tons 030-2½ tons 042 3½ Tons 019-1½ tons 031-2½ tons 043 3½ Tons Efficiency tons tons Tons EE EE tons tons Tons EE EE 2 -

3 Product pecifications 0181L* 0191K* 0241L* 0251L* 0301L* 0311K* apacities Max ooling (BTU/h) 18,000 18,000 24,000 24,000 30,000 30,000 EE/EE 14 / / / / / / 12.2 Decibels ompressor LA LA ondenser Fan Motor Hp 1/8 1/8 1/8 1/8 1/6 1/6 FLA efrigeration ystem efrigerant Line ize ¹ Liquid Line ize ( O.D.) ⅜" ⅜" ⅜" ⅜" ⅜" ⅜" uction Line ize ( O.D.) ¾" ¾" ¾" ¾" ¾" ¾" efrigerant onnection ize Liquid Valve ize ( O.D.) ⅜" ⅜" ⅜" ⅜" ⅜" ⅜" uction Valve ize ( O.D.) ² ³ ¾" ¾" ¾" ¾" ¾" ¾" Valve Type weat weat weat weat weat weat harge Included piston: Electrical Data Voltage-Phase (60 Hz) 208/ / / / / /230-1 Minimum ircuit Ampacity ⁴ Max. Overcurrent Protection ⁵ 15 amps 20 amps 15 amps 30 amps 20 amps 25 amps Min/Max Volts 197/ / / / / /253 onduit ½" or ¾" ½" or ¾" ½" or ¾" ½" or ¾" ½" or ¾" ½" or ¾" Equipment Weight hipping Weight ¹ Line sizes denoted for 25 line sets, tested and rated in accordance with AHI tandard 210/240. For other line-set lengths or sizes, refer to the installation & Operating instructions and/or the long line-set guidelines. ² Installer will need to supply ¾ to ⅞ adapters for suction line connections. ³ Installer will need to supply ⅞ to 1⅛ adapters for suction line connections. ⁴ Wire size should be determined in accordance with National Electrical odes; extensive wire runs will require larger wire sizes ⁵ Must use time-delay fuses or HA-type circuit breakers of the same size as noted. Notes Always check the & plate for electrical data on the unit being installed. Unit is charged with refrigerant for 15 of ⅜ liquid line. ystem charge must be adjusted per Installation Instructions Final harge Procedure

4 Product pecifications (cont.) 0361K* 0371K* 0421K* 0431K* 0481K* 0601K* apacities Nom ool (BTU/h) 36,000 36,000 42,000 42,000 48,000 60,000 EE/EE 14 / / / / / / 11.7 Decibels ompressor LA LA ondenser Fan Motor Hp 1/6 1/6 1/6 1/6 1/4 1/4 FLA efrigeration ystem efrigerant Line ize ¹ Liquid Line ize ( O.D.) ⅜" ⅜" ⅜" ⅜" ⅜" ⅜" uction Line ize ( O.D.) ⅞" ⅞" 1⅛" 1⅛" 1⅛" 1⅛" efrigerant onnection ize Liquid Valve ize ( O.D.) ⅜" ⅜" ⅜" ⅜" ⅜" ⅜" uction Valve ize ( O.D.) ² ³ ¾" ¾" ⅞" ⅞" ⅞" ⅞" Valve Type weat weat weat weat weat weat harge Included piston: Electrical Data Voltage-Phase (60 Hz) 208/ / / / / /230-1 Minimum ircuit Ampacity ⁴ Max. Overcurrent Protection ⁵ 30 amps 30 amps 35 amps 35 amps 45 amps 50 amps Min/Max Volts 197/ / / / / /253 onduit ½" or ¾" ½" or ¾" ½" or ¾" ½" or ¾" ½" or ¾" ½" or ¾" Equipment Weight hipping Weight ¹ Line sizes denoted for 25 line sets, tested and rated in accordance with AHI tandard 210/240. For other line-set lengths or sizes, refer to the installation & Operating instructions and/or the long line-set guidelines. ² Installer will need to supply ¾ to ⅞ adapters for suction line connections. ³ Installer will need to supply ⅞ to 1⅛ adapters for suction line connections. ⁴ Wire size should be determined in accordance with National Electrical odes; extensive wire runs will require larger wire sizes ⁵ Must use time-delay fuses or HA-type circuit breakers of the same size as noted. Notes Always check the & plate for electrical data on the unit being installed. Unit is charged with refrigerant for 15 of ⅜ liquid line. ystem charge must be adjusted per Installation Instructions Final harge Procedure

5 Wiring Diagram 0 [181**/241**/30A*/30K*/421**-601**] Wiring is subject to change. Always refer to the wiring diagram or the WANING unit for the most up-to-date wiring. LVJB /PK OMP H F F A (IF UED) ALTENATE DOUE POLE ONTATO ONL OLO ODE AK UE /PK UE/PINK TIPE OWN O OANGE PLE ED WH WHITE ELLOW ALTENATE DOUE POLE ONTATO M ONTOL BOX /PK HEM F F /PK /PK A (IF UED) NOTE 2 OMP EQUIPMENT GOUND HP NOTE 1 OUTDOO POWE UPPL EE ATING PLATE M WIING ODE FATO WIING OPTNAL FIELD WIING HP OMPONENT ODE ONTATO M OUTDOO FAN MOTO OMP OMPEO HP HIGH PEUE WITH INTENAL OVELOAD LVJB JUNTN BOX F UN APAITO FO OMPEO & FAN A TAT AIT TAT APAITO FO OMPEO (OPTNAL) TAT ELA FO OMPEO (OPTNAL) NOTE: 1) TO INDOO UNIT TEMINAL OK AND INDOO THEMOTAT 2) TAT AIT FATO EQUIPPED WHEN EQUIED. 3) UE OPPE ONDUTO ONL. UE N.E.. LA 2 WIE ONTOL HOWN WITH THEMOTAT IN 'OFF' POITN B High Voltage: Disconnect all power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury, or death

6 Wiring Diagram 0301L* /PK Wiring is subject to change. Always refer to the wiring diagram or the WANING unit for the most up-to-date wiring. LVJB /PK OMP H F F A (IF UED) ALTENATE DOUE POLE ONTATO ONL OLO ODE AK UE /PK UE/PINK TIPE OWN O OANGE PLE ED WH WHITE ELLOW ALTENATE DOUE POLE ONTATO M ONTOL BOX /PK HEM F F /PK A (IF UED) NOTE 2 OMP HP EQUIPMENT GOUND EE NOTE 3 H G EE NOTE 1 OUTDOO POWE UPPL EE ATING PLATE M 7 8 H WIING ODE FATO WIING OPTNAL FIELD WIING HP OMPONENT ODE ONTATO M OUTDOO FAN MOTO OMP OMPEO HP HIGH PEUE WITH INTENAL OVELOAD LVJB JUNTN BOX F UN APAITO FO OMPEO & FAN A TAT AIT TAT APAITO FO OMPEO (OPTNAL) TAT ELA FO OMPEO (OPTNAL) H ANKAE HEATE ANKAE HEATE ELA EE NOTE 1 NOTE: 1) TO INDOO UNIT TEMINAL OK AND INDOO THEMOTAT 2) TAT AIT FATO EQUIPPED WHEN EQUIED. 3) UE OPPE ONDUTO ONL. UE N.E.. LA 2 WIE ONTOL HOWN WITH THEMOTAT IN 'OFF' POITN A High Voltage: Disconnect all power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury, or death

7 Wiring Diagram 0 [191 / 25]1** LVJB ONTOL BOX OUTDOO POWE UPPL EE ATING PLATE OMP H F F A (IF UED) ALTENATE DOUE POLE ONTATO ONL OLO ODE AK UE OWN O OANGE PLE ED WH WHITE ELLOW ALTENATE DOUE POLE ONTATO M EE NOTE 1 WIING ODE FATO WIING OPTNAL M FIELD WIING A (IF UED) NOTE 2 F H F OMPONENT ODE ONTATO M OUTDOO FAN MOTO OMP OMPEO INTENAL OVELOAD LVJB JUNTN BOX F UN APAITO FO OMPEO & FAN A TAT AIT TAT APAITO FO OMPEO (OPTNAL) TAT ELA FO OMPEO (OPTNAL) ONTOL HOWN WITH THEMOTAT IN 'OFF' POITN. EE NOTE 1 OMP EQUIPMENT GOUND EE NOTE 3 NOTE: 1) TO INDOO UNIT TEMINAL OK & INDOO THEMOTAT. 2) TAT AIT FATO EQUIPPED WHEN EQUIED. 3) UE OPPE ONDUTO ONL. UE N.E.. LA 2 WIE P- Wiring is subject to change. Always refer to the wiring diagram or the WANING unit for the most up-to-date wiring. High Voltage: Disconnect all power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury, or death

8 Dimensions Model Dimensions W" D" H" 0181** ½ 0191** ½ 0241** ½ 0251** ½ 0301K* ½ 0301L* ¼ 0311** ½ 0361** ½ 0371** ½ 0421** ¼ 0431** ¼ 0481** 35½ 35½ 36¼ 0601** 35½ 35½ 38¼ Accessories Model # Description 018/19** 024/25** 030/31** 036/37** 042/43** 048** A-20 Anchor Bracket Kit ^ X X X X X A-21 Anchor Bracket Kit ^ X X A-01 Anti-hort ycle Kit X X X X X X X -U-1 Hard-start Kit X X X X -U-2 Hard-start Kit X X X -U-3 Hard-start Kit X X FK01A¹ Freeze Protection Kit X X X X X X X LK02A² Liquid Line olenoid Kit X X X X X X X LAKT01A Low-Ambient Kit X X X X X X X Low-Pressure witch Kit X X X X X X X TX2N4² TXV Kit X TX2N4A² TXV Kit X X TX3N4² TXV Kit X X TX5N4² TXV Kit X X X 060** ^ ontains 20 brackets; four brackets needed to anchor unit to pad ¹ Installed on indoor coil ² Field-installed, non-bleed, expansion valve kit ondensing units and heat pumps with rotary compressors require start-assist components when used in conjunction with an indoor coil using a non-bleed thermal expansion valve refrigerant metering device. Goodman Manufacturing ompany, L.P., reserves the right to discontinue, or change at any time, specifications or designs without notice or without incurring obligations Goodman Manufacturing ompany, L.P. Houston, Texas Printed in the UA