Summary of Aluminum Producer Net Shipments 1 December 2018 January 29, 2018

Transcription

1 Ryan Olsen V.P. Business Information & Statistics Henry F. Sattlethight Manager, Statistical Programs Summary of Aluminum Producer Net Shipments 1 December 2018 January 29, 2018 Aluminum net shipments (including exports) by domestic U.S. and Canadian facilities totaled an estimated 1,800 million pounds during December, an increase of 5.6 percent over the December 2017 total of 1,704 million pounds. Shipments of aluminum mill products rose 4.5 percent over the previous year to 1,206 million pounds, while shipments of aluminum ingot for castings, exports and destructive uses advanced 8.0 percent year-overyear, totaling 594 million pounds. For the year, preliminary producer shipments totaled an estimated 24,577 million pounds in 2018, an increase of 3.4 percent over the 2017 total of 23,763. December inventory levels totaled an estimated 3,456 million pounds, off eight-tenths of one percent from the previous month but up 7.8 percent year-over-year. Industry Net Shipments 1 December % Chge Nov. % Chge Total % Chge 2018* 2017 Dec/Dec 2018 Dec/Nov 2018* /17 Mill Products 1,206 1, , ,639 16, Ingot ,938 7, Total Shipments 1,800 1, , ,577 23, Producer Inventory 2 3,456 3, , ) U.S. and Canadian producer shipments excluding imports and intra-industry shipments for further fabrication. Estimated for 100% of the industry. 2) Inventory levels reflect both U.S. and Canadian producers. 2,500 Estimated Producer Shipments ,000 1,500 1, Jan. Feb. Mar. Apr. May June July Aug. Sept. Oct. Nov. Dec. The Aluminum Association Not Seasonally Adjusted The Association estimates producer net shipments based on reports by its members of their shipments for the latest month. The Association expands these data to total industry utilizing expansion ratio that attempts to reflect the relationship of reporters to the total industry. While the Association believes that its statistical procedures and methods are reliable, it does not warrant the accuracy or completeness of the data. All data contained herein are subject to revision. This report is available on the Aluminum Association website,

2 Aluminum Producer Net Shipments 1 U.S. and Canada Preliminary Estimates December 2018 Issued: January 29, 2019 December % Chge Nov. % Chge Total % Chge (Figures in Millions of Pounds) 2018* 2017 Dec/Dec 2018 Dec/Nov 2018* /17 Total Sheet & Plate , , Can Stock , , Non-heat Treatable Sheet , , All Other Sheet and Plate , , Foil Extruded Products , , Shapes , , Pipe & Tube Rod & Bar Elec. Conductor Other Total Mill Products 1, , , , , Ingot , , Total Shipments 1, , , , , Total Inventory 4 3, , , Ingot 1, , Scrap Other 1, , , Source: Note: 1) Data presented on this report represent total U.S. and Canadian domestic producer shipments less intra- industry shipments for further fabrication and exclude imports. 2) Other mill products drawing stock; bare wire; forgings and impacts; and powder and paste. 3) Net ingot shipments for foundry castings, export and destructive uses. 4) End of month inventory levels reflect stocks held by U.S. and Canadian producers. Detail may not add to total due to rounding. For additional Association statistics on producer shipments, click here.

3 Aluminum Producer Net Shipments 1 U.S. and Canada Preliminary Estimates December 2018 Issued: January 29, 2019 (Figures in Millions of Pounds) Jan. Feb. Mar. Apr. May June July Aug. Sept. Oct. Nov. Dec. YTD Total Sheet & Plate ,885 Can Stock ,014 Non-heat Treatable Sheet ,973 All Other Sheet and Plate ,897 Foil Extruded Products ,488 Shapes ,539 Pipe & Tube Rod & Bar Elec. Conductor Other Total Mill Products 1,360 1,303 1,446 1,400 1,453 1,424 1,383 1,458 1,372 1,474 1,360 1,206 16,639 Ingot ,938 Total Shipments 2,076 1,982 2,133 2,065 2,061 2,024 1,893 2,241 2,047 2,220 2,034 1,800 24,577 Total Inventory 4 3,198 3,165 3,138 3,196 3,308 3,254 3,345 3,433 3,446 3,460 3,483 3,456 Ingot 1, ,005 1, , ,051 1,070 1,004 Scrap Other 1,442 1,452 1,474 1,446 1,504 1,495 1,488 1,461 1,522 1,470 1,486 1,536 Integrated Inventory The Association will no longer distinguish "integrated" producers from all producers. We apologize for any inconvenience. Source: Note: 1) Data presented on this report represent total U.S. and Canadian domestic producer shipments less intra- industry shipments for further fabrication and exclude imports. 2) Other mill products drawing stock; bare wire; forgings and impacts; and powder and paste. 3) Net ingot shipments for foundry castings, export and destructive uses. 4) End of month inventory levels reflect stocks held by U.S. and Canadian producers. Detail may not add to total due to rounding. For additional Association statistics on producer shipments, click here.

4 Aluminum Producer Net Shipments 1 U.S. and Canada Preliminary Estimates 2017 Revised: August 30, 2018 (Figures in Millions of Pounds) Jan. Feb. Mar. Apr. May June July Aug. Sept. Oct. Nov. Dec. Year* Total Sheet & Plate ,507 Can Stock ,034 Non-heat Treatable Sheet ,823 All Other Sheet and Plate ,650 Foil Extruded Products ,274 Shapes ,385 Pipe & Tube Rod & Bar Elec. Conductor Other Total Mill Products 1,328 1,298 1,438 1,331 1,431 1,421 1,317 1,424 1,337 1,388 1,284 1,154 16,149 Ingot ,614 Total Shipments 2,036 1,918 2,129 1,974 2,095 2,037 1,788 2,106 1,998 2,059 1,918 1,704 23,763 Total Inventory 4 2,861 2,818 2,863 2,897 2,921 2,918 2,961 3,043 3,113 3,134 3,111 3,206 Ingot Scrap Other 1,377 1,379 1,414 1,433 1,420 1,396 1,438 1,392 1,462 1,469 1,444 1,467 Integrated Inventory The Association will no longer distinguish "integrated" producers from all producers. We apologize for any inconvenience. Source: Note: 1) Data presented on this report represent total U.S. and Canadian domestic producer shipments less intra- industry shipments for further fabrication and exclude imports. 2) Other mill products drawing stock; bare wire; forgings and impacts; and powder and paste. 3) Net ingot shipments for foundry castings, export and destructive uses. 4) End of month inventory levels reflect stocks held by U.S. and Canadian producers. Detail may not add to total due to rounding. For additional Association statistics on producer shipments, click here.

5 Aluminum Producer Net Shipments 1 U.S. and Canada Preliminary Estimates 2016 Revised: August 30, 2018 (Figures in Millions of Pounds) Jan. Feb. Mar. Apr. May June July Aug. Sept. Oct. Nov. Dec. Year* Total Sheet & Plate ,390 Can Stock ,154 Non-heat Treatable Sheet ,773 All Other Sheet and Plate ,463 Foil Extruded Products ,138 Shapes ,271 Pipe & Tube Rod & Bar Elec. Conductor Other Total Mill Products 1,254 1,280 1,388 1,339 1,338 1,395 1,288 1,413 1,354 1,300 1,279 1,131 15,758 Ingot ,835 Total Shipments 1,923 1,933 2,066 1,971 2,020 2,003 1,781 2,141 2,099 1,975 1,953 1,727 23,592 Total Inventory 4 2,966 3,050 2,960 2,981 2,904 2,918 2,983 2,960 2,907 2,896 2,793 3,075 Ingot 950 1,031 1, Scrap Other 1,498 1,517 1,452 1,467 1,466 1,457 1,514 1,473 1,446 1,418 1,378 1,632 Integrated Inventory The Association will no longer distinguish "integrated" producers from all producers. We apologize for any inconvenience. Source: Note: 1) Data presented on this report represent total U.S. and Canadian domestic producer shipments less intra- industry shipments for further fabrication and exclude imports. 2) Other mill products drawing stock; bare wire; forgings and impacts; and powder and paste. 3) Net ingot shipments for foundry castings, export and destructive uses. 4) End of month inventory levels reflect stocks held by U.S. and Canadian producers. Detail may not add to total due to rounding. For additional Association statistics on producer shipments, click here.

6 Producer Shipments & Inventory Levels U.S. and Canada December 2016 December ,600 Producer Shipments - Ingot and Mill Products 3,500 Producer Inventory Levels 1,400 3,400 1,200 1, Mill Products Ingot 3,300 3,200 3,100 3,000 2,900 2,800 2,700 The Aluminum Association Not Seasonally Adjusted 850 Sheet & Plate 100 Foil Extruded Products 90 Electrical Conductor

7 The Aluminum Association, founded in 1933, represents U.S. and foreign-based primary producers of aluminum, as well as recyclers, and producers of semi-fabricated products, foundries, distributors and suppliers. Member companies operate roughly 170 plants in North America and many conduct business worldwide. Statistical Reports and Publications The Aluminum Association's statistical programs provide industry information on primary aluminum production, new orders of mill products, industry shipments, end use market estimates, inventories, recycling and foreign trade on a monthly, quarterly and annual basis. Special surveys provide data on specific subjects such as primary capacity, flat roll capacity, inventories and castings shipments. Custom reports are available on a for-fee basis and Webinars may be scheduled by contacting the Association. Industry Overview Aluminum Statistical Review (Annual Fact Book) Aluminum Highlights (Weekly) Aluminum Situation (Monthly) Summary of Producer Shipments and Inventories (Monthly) Primary Aluminum Primary Aluminum Production (Monthly) Primary Installed Capacity (Annual) Shipments of Primary Aluminum by Form (Quarterly) Mill Products Index of Net New Order Receipts for Aluminum Mill Products (Monthly) Can Stock Shipments (Monthly) Electrical Conductor Shipments (Monthly) Extruded Products Shipments and Press Utilization (Monthly) Flat Roll Capacity (Annual) Forging and Impacts Shipments (Monthly) Rod, Bar, and Wire Shipments (Monthly) Sheet and Plate Shipments (Monthly) End Use Extrusion Shipments by End Use (Quarterly) Fin Stock Shipments by End Use (Quarterly) Foil Shipments by End Use (Monthly) Sheet and Plate Shipments by End Use (Quarterly) Castings U.S. Foundry Castings Shipments (Biannual) Canada Foundry Castings Shipments (Annual) Recycling New Can Stock (Class) Scrap Receipts (Monthly) Used Beverage Can Reclamation (Annual) Foreign Trade Summary of U.S. Imports and Exports (by Commodity), Monthly U.S. and Canada Foreign Trade Online Database - U.S., Canada and China Exports & Imports of Aluminum (By Commodity, by Country) For a complete list of statistical publications and reports visit our website.

8 COPYRIGHT NOTICE AND LICENSE AGREEMENT The foregoing document is subject to the copyright laws of the United States and any jurisdiction in which the document is distributed by The Aluminum Association. By accepting receipt of this document, the recipient ( Licensee ) agrees to the terms set forth herein by The Aluminum Association ( Licensor ) regarding the foregoing document (the Work ): 1. Licensor owns all proprietary rights in and to the Work. 2. Licensor retains all rights in and to the Work and has the right to license the Work. 3. Licensor grants to Licensee a limited worldwide (to the extent such rights exist), non-exclusive, nonsublicensable, non-transferable, royalty-free license to utilize the Work internally and to reproduce, copy, and distribute the Work internally to Licensee s employees, agents, and representatives. 4. Licensee acknowledges that Licensor is the sole and exclusive owner of the Work and all associated federal registrations and pending registrations and all common law rights, and Licensee has no claim to the rights in and to the Work. Nothing in this Agreement shall serve to limit Licensor s ownership, use, sale, or distribution of the Work. 5. Licensee agrees that the scope of this Agreement does not permit it to create any derivative works of the Work that incorporate and/or alter the content of the Work. 6. Licensee agrees that it shall not copy, distribute, or reproduce the Work to or for any third party without express prior written authorization from Licensor. Unless authorized by Licensor in writing, any distribution or reproduction of the Work in whole or in part to third parties is strictly prohibited. 7. Licensee shall give Licensor prompt notice of any unauthorized uses of the Work of which it becomes aware. Licensee shall cooperate with Licensor in connection with any action taken by Licensee to enforce, maintain, or defend the copyrights in the Work that arise out of or relate to the Licensee s use, reproduction, and/or distribution of the Work, and shall not be entitled to any recoveries in respect of the foregoing. 8. The Work is provided as is, without warranty of any kind, express or implied. Licensor hereby disclaims all express and implied warranties. There is no warranty against interference with Licensee s enjoyment of the information or against infringement; there is no warranty that the information contained in the Work is fit for any particular purpose; there is no warranty as to the accuracy of the informational content of the Work; there is no warranty of merchantability; and there are no warranties which extend beyond the description on the face hereof. 9. This License Agreement shall be construed and governed in accordance with the laws of the Commonwealth of Virginia The Aluminum Association. All rights reserved.