BRIDGING THE GAP BETWEEN SMALL AND MIGHTY.

Transcription

1 ,00,600 GPD KEY FETURES: Model T56+PC Shown HP 6SS Feed Pump 0 sq ft of 5 Micron Filtration Robust 6SS HP Pump Wash-down Duty Motors Dual Shockmounting Exclusive V Control System Marine Certified HMI Touch Screen One-Piece luminum Powder Coated Frame Construction Fully utomatic Operation with PC Entire Series Is Upgradeable To,600 GPD RIDGING THE GP ETWEEN SMLL ND MIGHTY. The tlas+ Series is the most compact commercial system FCI has to offer. uilt on the smaller, marine Max-Q+ platform, it has all the working benefits of its much larger, industrial Neptune+ sibling. The tlas+ Series is capable of producing,00,600 GPD, and is upgradeable throughout the series. The utomated Pressure Control (PC) with manual override puts making pure fresh water, literally, a touch away. t the heart of the system is a durable wash-down duty, 5 HP motor and a robust 6 stainless steel high pressure pump that allow for extended run times. When installation space or generator size is limited, the tlas+ Series truly encompasses the best of both pleasure boating and commercial worlds. For nearly three decades, FCI Watermakers has been pioneering technologies and manufacturing the most reliable, trouble-free watermaking systems for the offshore and boating industries. Each unit is manufactured and live-tested in our facility. Your system comes with peace of mind, and a readily available customer service and technical support team. Our worldwide service network ensures proper maintenance, and unrivaled satisfaction. HMI TOUCH CONTROLS Simple one-touch operation, and intuitive interface. ESY SETUP ND CONFIGURTION Icons and simple navigation make customizing your system effortless. QUICK VIEW Monitor system operation and operational stats, or connect via MODUS. ROUST PUMP ND MOTOR DRIVE Extended-duty, 6 stainless steel commercial High-Pressure Pump. FCI Watermakers West Valley, UT 80 T F fciwatermakers.com

2 TLS+PC SYSTEM FETURES: MOTORS: TEFC continuous-duty washdown rated motors with 6SS shaft, and sealed maintenance-free bearings for long life applications. LP FEED PUMP: Closed impeller design offers 50% more pressure efficiency over standard pumps. ELECTRICL: NEM X rated enclosure. HMI TOUCH SCREEN: 7" High-resolution, Marine Grade and ridge Certified. OPEN FRME DESIGN: llows easy visual inspection and access for maintenance. FRESH WTER FLUSH: Schedule automated flushes through the V Control. SHOCK MOUNTS: Installed on frame and motor to reduce noise and vibration. MEMRNES: High Rejection non-proprietary membranes used to obtain the highest quality of product water. UTOMTIC PRESSURE CONTROL (PC): uto-adjusts system pressure to feed water conditions. HIGH PRESSURE PUMP: Extended-duty 6SS HP pump. PRODUCT VESSELS: 6 SS product/pressure ports, and FD/NSF-5 fittings used on the product water. PRE-FILTER: 0 sq. ft. of pleated filter with PVC core in addition to pressure monitoring and alarming. DESIGN PRMETERS POWER SUPPLY OPTIONS UTILITIES Design Permeate Salinity: < 500ppm Salt Rejection (Chloride): 99.7% Power:.7kW Control Voltage: vdc Operation Pressure: 85 PSI/56 Kg/cm² VC/Phase/Hz 08-0//60 mperes: // // Inlet: " FNPT rine: 5 /8" Tube Product: /" Tube FWF: /" Tube MODEL GPD/LPD GPH/LPH m RECOVERY RTE % WEIGHT lbs/kg T6+/ T6+PC T06+/ T06+PC T56+/ T56+PC T86+/ T86+PC T66+/ T66+PC,00 / 5,98,000 / 7,568,500 / 9,60,800 / 0,595,600 /,6 58 / 8 / 5 0 / 9 7 / 50 / / / / / / 67. NOTE: Ratings based on 77ºF/5ºC; 5,000 TDS; < SDI; 7.5 ph; Free Chlorine max 0. mg/l. DIMENSIONS FRME WIDTH FRME ONLY.60 in. WITH FILTER 7.0 in. WITH MEMRNES 7.00 in GPD WITH MEMRNES 5.5 in. 800 GPD Unit FRME DEPTH FRME ONLY 8.0 in. WITH MEMRNES.50 in. Units up to 800 GPD FRME HEIGHT H 0.50 in. LP PUMP W 6.9 in. D.5 in. H 9. in. PRE-FILTER W. in. D 9.6 in. H 9.0 in. 600 PV SSEMLY Includes Wall-mounting racket W 5.6 in. D 7.8 in. H 5.5 in.

3 tlas+ / tlas+ PC Series Speicifications Reverse Osmosis Watermaker Technical Specifications MNUFCTURE: FCI Watermakers, U.S. MODEL: T6+ / T6+ PC T06+ / T06+ PC T56+ / T56+ PC T86+ / T86+ PC T66+ / T66+ PC UPDTED /0/7

4 tlas+ / tlas+ PC Series Speicifications. Design Parameters Design Output GPD [LPD] [598-6] Permeate salinity, max [TDS] < 500 Salt Rejection (Chloride) [%] 99.8 Design recovery rate [%] - Operation Pressure PSI [Kg/cm ] 85 [56] Sea Water Data - Total Dissolved Solids/ TDS [mg/l] max Silt Density Index/ SDI max. - Temperature Range F [ o C] 5-95 (-5) - Free Chlorine mg/l max Sea water design salinity ppm,000 - Sea water flow (normal operation) GPM 7. - Sea water supply pressure PSI [bar] > - ph-value: -, typical 7.5 Weight: LS[kG} -69 [ ]. Frame Dimensions Width [in].60 Depth [in] 8.0 Height [in] 0.50 Frame with vessels Width [in] 7.00 Depth [in].50 Height [in] 0.50 Water Connections Inlet rine Product Fresh water flush hose 5/8 tubing compression fitting / tubing compression fitting / tubing compression fitting. Description of Supply Scope: Each Framed Watermaker includes. Low-pressure Pump Material: Pressure head: Power consumption: inlet/outlet: 6SS head with ½ HP washdown duty motor with 6SS shaft 5 PSI HP x NPT. Pre-Filter ssembly commercial filter housing, 5 micron cartridge, 0-sq.ft. High Pressure Pump with Motor 6SS Direct Drive High-pressure plunger pump (positive displacement pump) w/ 5 HP TEFC washdown duty motor. Capacity : 7. / 8 GPM / LPM Pressure head: 69 bar Power consumption:. kw UPDTED /0/7

5 tlas+ / tlas+ PC Series Speicifications. Permeators and Pressure vessels, or Spiral wound membranes with thin film composite membranes fitted into pressure vessels mounted on the frame Membrane type:.5 x 0 / x0 Max operating pressure: 69 bar Max operating temperature: 5 o C Permeate piping: Poly Tubing Materials - Permeators: polyester / polsulfone / polyamide - Pressure Vessels: GRP.5 Piping and accessories High-pressure Tubing made of R00 HP hose w/6ss JIC reusable hose ends. Low pressure piping made of poly tubing and sch 80 PVC ll piping completely assembled including fittings, process valves, locally mounted gauges etc..6 V HMI Control System The V control systems is the most advanced watermaker controllers with FCI s patented technology featuring: Type pproved 7"High Resolution Touch Screen Interface ll Displays are Type pproval Certified for marine use by: S, GL, Lloyd s Register, EME, Det Norske Veritas, and RussianMaritime Register of Shipping. NME 000 compatible Unique IP address for remote access uilt-in, on-screen troubleshooting and manual Control larms: Low pressure fault High pressure fault utomatic low quality salinity diverts Production beyond rated capacity Control Features: Stage start Motor contactors utomatic salinity control utomatic fresh water flush Programmable fresh water flush for unattended flushing Programmable start time Programmable production capacity for making a predetermined quantity of water Programmable to run for a specified amount of time. Fully automatic operation (with PC option) NME compatible System Control Panel Low pressure transducer High pressure transducer Product flow sensor rine flow sensor UPDTED /0/7

6 tlas+ / tlas+ PC Series Speicifications.7 Loose Supply: Installation Kit: included with necessary tubing and connection fittings needed to install the Watermaker on most standard installations. ddition tubing may be needed on some installations. The industry s most comprehensive complete installation, operation and maintenance manual.8 Optional Equipment and ccessories DTS, Dockside Treatment System Compatible ridge classified." or 7"remote touch control station ph neutralizer filter Cruising kits UV sterilizers Feed water pressure regulators, relief valves utomated and manual Media Filters System soft start Shipyard Supply : Minimum of a Inlet Thru Hull Fitting with Forward Facing Scoop and Shut-off Valve Minimum of a ¾ Thru-Hull Discharge Fitting and ll Pipings and Fittings Minimum of a Sea Strainer Potable Water Storage Tank Line voltage wire, panel breaker, misclanous wire and connectors. (standard parts). Technical Service vailible upon request. Per diam charges will apply.. Technical Document 5. Warranty: The industry s most comprehensive complete installation, operation and maintenance manual lso available for download upon request One year from date of start up or 8 months from invoice date, whichever is earlier. UPDTED /0/7

7 0.5 in 50.9 mm 7. in 96. mm.5 in 57. mm DRY WEIGHT PPROX. 0 LS / 08.9 KG DIMENSIONS & WEIGHTS SUJECT TO CHNGE WITHOUT NOTICE DIMENSIONS RE IN INCHES PPROVLS DTE TOLERNCES RE DECIMLS FRCTIONS PREPRED Y Mark /7/7.X :.00 /6.XX :.00 NGLES CHECKED Y PPROVED Y THIS DRWING CONTINS PROPRIETRY INFORMTION OF FILTRTION CONCEPTS INC. IT SHLL NOT E RELESED, USED, DUPLICTED OR DISCLOSED IN WHOLE OR IN PRT FOR MNUFCTURE OR PROCUREMENT WITHOUT THE EXPLICIT INTENT ND WRITTEN PERMISSION OF FCI WHICH RETINS LL DESIGN ND PTENT RIGHTS. SIZE DRWING NUMER REV DO NOT SCLE FILTRTION CONCEPTS INC. TEL (80) FX(80) tlas+pc 500 GPD T56+PC SHEET OF

8 0.5 in 50.9 mm 5.5 in 85. mm.6 in 6.6 mm DRY WEIGHT PPROX. 6 LS / 7.9 KG DIMENSIONS & WEIGHTS SUJECT TO CHNGE WITHOUT NOTICE DIMENSIONS RE IN INCHES PPROVLS DTE TOLERNCES RE DECIMLS FRCTIONS PREPRED Y Mark /7/7.X :.00 /6.XX :.00 NGLES CHECKED Y PPROVED Y THIS DRWING CONTINS PROPRIETRY INFORMTION OF FILTRTION CONCEPTS INC. IT SHLL NOT E RELESED, USED, DUPLICTED OR DISCLOSED IN WHOLE OR IN PRT FOR MNUFCTURE OR PROCUREMENT WITHOUT THE EXPLICIT INTENT ND WRITTEN PERMISSION OF FCI WHICH RETINS LL DESIGN ND PTENT RIGHTS. SIZE DRWING NUMER REV DO NOT SCLE FILTRTION CONCEPTS INC. TEL (80) FX(80) tlas+pc 800 GPD T86+PC SHEET OF

9 0.5 in 50.9 mm 7. in 9. mm 8. in 65. mm 5.5 in 67.7 mm 5.6 in 85.9 mm 7.8 in 98.6 mm DRY WEIGHT PPROX. 69 LS / 67. KG DIMENSIONS & WEIGHTS SUJECT TO CHNGE WITHOUT NOTICE DIMENSIONS RE IN INCHES PPROVLS DTE TOLERNCES RE DECIMLS FRCTIONS PREPRED Y Mark /7/7.X :.00 /6.XX :.00 NGLES CHECKED Y PPROVED Y THIS DRWING CONTINS PROPRIETRY INFORMTION OF FILTRTION CONCEPTS INC. IT SHLL NOT E RELESED, USED, DUPLICTED OR DISCLOSED IN WHOLE OR IN PRT FOR MNUFCTURE OR PROCUREMENT WITHOUT THE EXPLICIT INTENT ND WRITTEN PERMISSION OF FCI WHICH RETINS LL DESIGN ND PTENT RIGHTS. SIZE DRWING NUMER REV DO NOT SCLE FILTRTION CONCEPTS INC. TEL (80) FX(80) tlas+pc 600 GPD T66+PC SHEET OF

10 GENERL CONNECTION DIGRM SIDE VIEW OF TLS+ REVISIONS REV DESCRIPTION DTE ENG. MFG. Production Release /6/7 M PRE-FILTER TLS+ FRME INSTLL RINE DISCHRGE FITTINGS OVE SE LEVEL Post Treatment CHRCOL FILTER (GC, OPTIONL) LOW PRESSURE PUMP PRODUCT WTER TNK PUMP (SHIP'S SUPPLY) CHECK VLVE (SHIP'S SUPPLY) SE STRINER (SHIP'S SUPPLY) /" SE COCK (OWNER SUPPLIED) ULTRVIOLET (OPTIONL) LDDER TNK (SHIP'S SUPPLY DIMENSIONS RE IN INCHES TOLERNCES RE DECIMLS FRCTIONS.X :.00 /6.XX :.00 NGLES PPROVLS DTE PREPRED Y CHECKED Y PPROVED Y CD SM /0/07 THIS DRWING CONTINS PROPRIETRY INFORMTION OF FILTRTION CONCEPTS INC. IT SHLL NOT E RELESED, USED, DUPLICTED OR DISCLOSED IN WHOLE OR IN PRT FOR MNUFCTURE OR PROCUREMENT WITHOUT THE EXPLICIT INTENT ND WRITTEN PERMISSION OF FCI WHICH RETINS LL DESIGN ND PTENT RIGHTS. SIZE DRWING NUMER REV DO NOT SCLE FILTRTION CONCEPTS INC. TEL (80) FX(80) tlas+ Frame General Connection Diagram SHEET OF

11 RINE DISCHRGE /" PE FITTING FRESH WTER FLUSH SUPPLY /" PE FITTING PRODUCT DISCHRGE /8" PE FITTING FRESH WTER FLUSH DISCHRGE /" PE FITTING OIL DRIN DIMENSIONS RE IN INCHES PPROVLS DTE TOLERNCES RE DECIMLS FRCTIONS PREPRED Y Mark /0/07.X :.00 /6.XX :.00 NGLES CHECKED Y PPROVED Y THIS DRWING CONTINS PROPRIETRY INFORMTION OF FILTRTION CONCEPTS INC. IT SHLL NOT E RELESED, USED, DUPLICTED OR DISCLOSED IN WHOLE OR IN PRT FOR MNUFCTURE OR PROCUREMENT WITHOUT THE EXPLICIT INTENT ND WRITTEN PERMISSION OF FCI WHICH RETINS LL DESIGN ND PTENT RIGHTS. SIZE DRWING NUMER REV DO NOT SCLE FILTRTION CONCEPTS INC. TEL (80) FX(80) tlas+ Frame General Connection Diagram SHEET OF

12 REVISIONS REV DESCRIPTION DTE ENG. MFG. Production Release /7/7 M. in 60. mm. in 57. mm. in 6.9 mm.5 in 68. mm.0 in 5. mm DIMENSIONS RE IN INCHES PPROVLS DTE TOLERNCES RE DECIMLS FRCTIONS PREPRED Y Mark /7/7.X :.00 /6.XX :.00 NGLES CHECKED Y PPROVED Y THIS DRWING CONTINS PROPRIETRY INFORMTION OF FILTRTION CONCEPTS INC. IT SHLL NOT E RELESED, USED, DUPLICTED OR DISCLOSED IN WHOLE OR IN PRT FOR MNUFCTURE OR PROCUREMENT WITHOUT THE EXPLICIT INTENT ND WRITTEN PERMISSION OF FCI WHICH RETINS LL DESIGN ND PTENT RIGHTS. SIZE DRWING NUMER REV DO NOT SCLE FILTRTION CONCEPTS INC. TEL (80) FX(80) tlas+pc 500 GPD T56+PC SHEET OF

13 .5 in.0 mm 9. in 5. mm.0 in 0.6 mm.0 in 0.6 mm 6.8 in 7.9 mm. in 0.5 mm DRY WEIGHT PPROX. 7 LS / 6.8 KG DIMENSIONS & WEIGHTS SUJECT TO CHNGE WITHOUT NOTICE DIMENSIONS RE IN INCHES TOLERNCES RE DECIMLS FRCTIONS.X :.00 /6.XX :.00 NGLES PPROVLS PREPRED Y CHECKED Y PPROVED Y THIS DRWING CONTINS PROPRIETRY INFORMTION OF FILTRTION CONCEPTS INC. IT SHLL NOT E RELESED, USED, DUPLICTED OR DISCLOSED IN WHOLE OR IN PRT FOR MNUFCTURE OR PROCUREMENT WITHOUT THE EXPLICIT INTENT ND WRITTEN PERMISSION OF FCI WHICH RETINS LL DESIGN ND PTENT RIGHTS. DTE Mark /9/0 SM 7/6/005 SIZE DRWING NUMER REV DO NOT SCLE FILTRTION CONCEPTS INC. TEL (80) FX(80) ssy, LP Pump, SS, HP, PH F SHEET OF

14 8.9 in 8. mm 0.0 in 5. mm 5.0 in 7. mm.0 in 79.5 mm DRY WEIGHT PPROX. 7 LS /. KG 5.0 in 7. mm DIMENSIONS & WEIGHTS SUJECT TO CHNGE WITHOUT NOTICE DIMENSIONS RE IN INCHES TOLERNCES RE DECIMLS FRCTIONS.X :.00 /6.XX :.00 NGLES PPROVLS DTE PREPRED Y CHECKED Y PPROVED Y CD SM /0/07 THIS DRWING CONTINS PROPRIETRY INFORMTION OF FILTRTION CONCEPTS INC. IT SHLL NOT E RELESED, USED, DUPLICTED OR DISCLOSED IN WHOLE OR IN PRT FOR MNUFCTURE OR PROCUREMENT WITHOUT THE EXPLICIT INTENT ND WRITTEN PERMISSION OF FCI WHICH RETINS LL DESIGN ND PTENT RIGHTS. SIZE DRWING NUMER REV FILTRTION CONCEPTS INC. TEL (80) FX(80) ssy, Pre-Filter, 5 Micron, quamiser+/maxq+/tlas+ DO NOT SCLE SHEET OF

15 REVISIONS REV DESCRIPTION DTE ENG. MFG. Production Release /0/7 M LP TRNSDUCER VESSEL SETUP w/tlas+ HP PUMP PRE-FILTER HP TRNSDUCER FM w/tlas+pc TDS PROE LEGEND FM SE WTER INLET CHECK VLVE REMINERLIZTION FILTER ULTRVIOLET FRESH WTER FLUSH FILTER GC LP PUMP SE STRINER LL VLVE WY LL VLVE WY SOLENOID VLVE WY SOLENOID VLVE CHRCOL FILTER LDDER TNK RINE DISCHRGE MNUL NEEDLE VLVE UTO NEEDLE VLVE PUMP ULTRVIOLET CHECK VLVE FM FLOW METER PRODUCT WTER TNK PI PRESSURE GUGE TYPICL SHIP'S FRESH WTER SYSTEM ITEMS TO E PROVIDED Y UILDER DIMENSIONS RE IN INCHES TOLERNCES RE DECIMLS FRCTIONS.X :.00 /6.XX :.00 NGLES PPROVLS DTE PREPRED Y CHECKED Y PPROVED Y M /0/07 THIS DRWING CONTINS PROPRIETRY INFORMTION OF FILTRTION CONCEPTS INC. IT SHLL NOT E RELESED, USED, DUPLICTED OR DISCLOSED IN WHOLE OR IN PRT FOR MNUFCTURE OR PROCUREMENT WITHOUT THE EXPLICIT INTENT ND WRITTEN PERMISSION OF FCI WHICH RETINS LL DESIGN ND PTENT RIGHTS. SIZE DRWING NUMER REV DO NOT SCLE FILTRTION CONCEPTS INC. TEL (80) FX(80) P&ID, tlas SHEET OF

16 TERMS ND CONDITIONS OF SLE Order cceptance: Orders are considered firm and non-cancelable once issued in writing and accepted by Filtration Concepts Inc. (FCI). The entire quotation or proposal will be considered a contract with the buyer once the order has been placed and accepted. FCI is not responsible for typographical or other good faith errors in proposals or quotations. ny changes to any part of FCI proposals must be accepted in writing by FCI to be valid. FCI reserves the right to make improvements to the system design and to substitute equal or better materials or components as may be required to affect a timely delivery. ny customer requested changes made after order acceptance will be subject to Change Order Terms as detailed below. Change Order Fees: ny changes made to the system specifications, design, layout, operating parameters, components, quantities or other changes entailing additional costs for FCI after placement of the order are subject to change fees. ny Change Orders must be in writing and subject to additional charge. These change fees will be quoted at the time of the request for a change and must be agreed to in writing prior to making the change in the drawings or the system. When the change is agreed to in writing it shall become a binding part of the order. ll change fees must be paid within 0 days after the change order is effective, but prior to the time of shipment. Delivery Date Conditions: FCI will deliver the equipment (present the equipment completed and ready for pick up by the freight carrier) the quoted delivery time from the receipt of the order together with the nonrefundable deposit. This delivery time is subject to change up till order acceptance due to workload and availability of materials. The delivery time does not start counting with the issue of the order, but rather when it, along with the non-refundable deposit are received in approved form by FCI. FCI is not responsible for delays in performance due to flood, fire, strike, or other labor difficulty, act of God, act of governmental authority or of the purchaser, earthquake, riot, fuel or energy shortage, accidents, delay in transportation, inability to obtain necessary labor, materials or manufacturing facilities or output from the usual source or due to any other cause beyond its reasonable control. L/C Terms: If using an L/C, the L/C must be irrevocable, confirmed by a major U.S. bank, and all terms, conditions, F.O.. point, schedule of payments, delivery date and expiration date, documentation required, and other important conditions must be approved by FCI. It is therefore advised that a draft of proposed terminology and conditions be faxed to FCI prior to opening the L/C in order to avoid unnecessary delays and amendment costs, which would be for the account of the purchaser. Wire Transfers: Payments via wire transfers must arrive at FCI s bank in full. ll charges outside FCI s bank are the responsibility of the purchaser. When the purchaser s bank uses an intermediary bank to send the funds, the intermediary bank s charges are the responsibility of the purchaser. FCI is responsible only for the charges imposed by FCI s bank. Contact FCI, for wire transfer routing instructions. Past Due ccounts: The purchaser agrees to pay all amounts when due. In the event of late payments, the purchaser agrees to pay interest at the rate of.5% on all past due amounts until paid. The purchaser also agrees to pay attorney s fees or other collection costs required to obtain any payments not remitted when due. No performance, including deliveries or warranties, shall be required from FCI unless the account is current. Shipping: ll FCI products are offered Ex-Works Factory, West Valley City, Utah, or other FCI location. ll shipping costs, including local ground transportation from the factory to the port, transfer fees, loading fees, documentation fees, etc., are the responsibility of the purchaser. FCI will assist in arranging transportation at favorable rates.