SPECIFICATION FREELANDER SERIES

Transcription

1 LISTED CM SPECIFICATION FREELANDER SERIES STREET LIGHT LED LUMINAIRE PRODUCT NAME: FREELANDER VERSION: 48W LED DIMENSION(MM): BODY MATERIAL: ALUMINIUM DIFFUSER MATERIAL: PMMA C US ta40 SHANGHAI P&Q LIGHTING CO., LTD IGHTING

2 CATALOGUE PARTS LISTS & EXPLODED ASSEMBLY DRAWINGS PAGE 3 QUICK SPECIFICATION & LIGHT DISTRIBUTION PAGE 4 SPECIFICATION & DIM DRAWINGS PAGE 6 INSTALLATION INSTRUCTION PAGE 7 PACKING INFORMATION & CONTACT INFORMATION PAGE 9

3 PARTS LISTS & EXPLODED ASSEMBLY DRAWINGS EXPLODED ASSEMBLY DRAWINGS ELECTRIC PART FREELANDER LED PARTS LISTS. ALUMINIUM DIE CAST BASE & GASKET 3 2. ALUMINIUM GEAR TRAY KITS/ELECTRIC PART 3. CLIPS KITS S/STEEL PMMA DIFFUSER 5. GEAR BOX 6. CABLE GLAND HOUSING KITS ACCESSORIES 7 HOUSING KITS ACCESSORIES 7..2MM GAL HOLDER BRACKET 8. E27 HODER 8 9. GEAR COVER 0. REFLECTOR 9 ACCESSORIES DRAWINGS BRACKET 0 FREELANDERACC NOTE :. FREELANDER STREET LIGHT INCLUDE NO.- NO.6 ON THE PARTS LIST AND WITH PCB, CHIPS, DRIVER BE ASSEMBLED COMPLETELY. 2. HOUSING KIT CAN BE USED TO FIT 70W HPS & BALLAST. 3. HOUSING KIT INCLUDE NO., NO.3, NO.4, & NO.7- NO.0 ON THE PARTS LIST. 4. EITHER WHOLE LIGHT ORDER OR HOUSING KIT ORDER INCLUDE BRACKET. 5. ACCEPT BRACKET ORDER.

4 SPECIFICATION & LIGHT DISTRIBUTION PICTURE FEATURES AVERAGE RATED LED LAMP LIFE OF 50,000 HOURS AT L70 IN TA40C ENVIRONMENTS. DURABLE ALUMINIUM OR STAINLESS STEEL BODY OPTIONS. HIGH PERFORMANCE OPTICS WITH IMPROVED ILLUMINATION UNIFORMITY. UV RESISTANT MOULDED LENS WITH INTEGRAL SILICONE SEAL. SUITS STANDARD DIAMETER 34MM POLES AND SPIGOT BRACKETS. LOW PROFILE PROTECTION, IK0 AMBIENT TEMPERATURE, -25 C TO 40 C APPLICATIONS DESIGNED FOR THE SAFE ILLUMINATION OF INFRASTRUCTURE SUCH AS CONVEYORS, WALKWAYS AND PLATFORMS ON MINES, POWER STATIONS, WHARVES, SUGAR MILLS, EYE WASH STATIONS AND GENERAL INDUSTRIAL PLANTS. TECHNICAL FREELANDER CERTIFICATE CERTIFICATE NO CE BCTC BCTC BCTC ETL SHA PRODUCTS QUICK INFORMATION VERSION DIM (MM) MASS (KG) W LED ACCESSORIES WALL BRACKET 35, C0-80 C ,

5 SPECIFICATION & PACKING INFORMATION SPECIFICATION LIST FREELANDER POWER 48W NOMINAL VOLTAGE AC90-240V POWER FACTOR 0.95 PCB CONNECTION 2 SERIES 6 PARALLELS DRIVER OUTPUT 30-48V/.2A PCB QUANTITY 6PCS CHIPS EPISTAR 5630 CHIP QUANTITY 92PCS CCT K CRI 80 LUMINOUS FLUX 3998LM EFFICIENCT 87LM/W BEAM ANGLE 20 BODY MATERIAL ALUMINIUM ADC2 DIFFUSER MATERIAL PMMA IP RATE AMBIENT TEMPERTURE -25 C TO 40 C STORAGE TEMPERATURE -25 C TO 70 C CARTON DIM FOR PC/CTN(MM) CARTON DIM FOR 6PC/CTN(MM) DIM DRAWING (MM) Φ34.0

6 INSTALLATION INSTRUCTION INSTALLATION OR ASSEMBLY INSTRUCTIONS PLEASE READ THESE INSTALLATION INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR MAINTAINING THIS EQUIPMENT. THESE INSTRUCTIONS AND LOCAL REGULATIONS(WHERE APPLICABLE), BY AN AUTHORISED AND LICENCED ELECTRICIAN. IMPORTANT THE PRODUCT MUST BE MAINTAINED AND OPERATED IN ACCORDANCE WITH THE MANUFACTURE S INSTRUCTIONS, FAILURE TO DO SO MAY DAMAGE THE PRODUCT AND SERVICES. IT IS STRONGLY RECOMMENDED THAT THIS IMPORTANT NOTE BE COMMUNICATED TO THE OWNER AND OR OPERATOR OF THE INSTALLATION AT THE TIME OF SITE COMMISSIONING. GOOD PRACTICE DOES NOT RECOMMEND THE 24/7 USE OF PRODUCTS WITHOUT THE APPLICATION OF SUITABLE SWITCH CYCLE INTERVALS. PNQ IS NOT RESPONSIBLE FOR ANY PRODUCT NOT MAINTAINED IN ACCORDANCE WITH THE RECOMMENDED PROCEDURES. ALL PRODUCTS SHOULD BE THOROUGHLY CLEANED ON A REGULAR BASIS TO ENSURE THE OPTICAL PERFORMANCE, TOGETHER WITH THE ELECTRICAL,MECHANICAL AND STRUCTURAL INTEGRITY AS DESIGNED, IS MAINTAINED THROUGHOUT THE SERVICE LIFE OF THE PRODUCT. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR. PRODUCT SPECIFICATION: FREELANDER IP RATING NOMINAL VOLTAGE AC80-240V LINE CURRENT.2A SUITABLE FOR DIRECT MOUNTING ON FLAMMABLE SURFACES NO 2. STORAGE: PRIOR TO INSTALLATION PRODUCTS ARE TO BE STORED IN COOL AND DRY CONDITIONS. 3. APPLICATION: THE INSTALLATION APPLICATION AND ORIENTATION OF THE PRODUCT IS DESIGNED IN ACCORDANCE WITH THE NOMINATED PRODUCT IP RATING, CLASS DESIGNATION AND THESE INSTALLATIONS. INSTALLATION ENVIRONMENTS OUTSIDE THESE CONDITIONS ARE NOT RECOMMENDED. 4. INSTALLATION: INSTALLATION OF THE PRODUCT IS TO BE COMPLETED BY AN AUTHORIZED AND LICENCED ELECTRICIAN, IN ACCORDANCE WITH THESE INSTRUCTIONS, RELEVANT AUSTRALIA STANDARDS AND LOCAL REGULATIONS (WHERE APPLICABLE). FOR ELECTRONIC CONTROL EQUIPMENT (WHEN SUPPLIED) DO NOT MEGGER BETWEEN A AND N. ALL CABLE TERMINATIONS MUST BE INSTALLED IN ACCORDANCE WITH THE DESIGNATED IP RATING OF THE PRODUCT. EXTERIOR PRODUCTS (WHERE RELEVANT), INSTALLED IN HIGH WIND ENVIRONMENTS MUST HAVE SUITABLE INSTALLATION / FASTENING METHODS APPLIED TO ENSURE THE PRODUCT S MOUNTING POINTS ARE NOT DAMAGED THROUGH, CORROSION, CONSTANT VIBRATION AND OR MOVEMENT. EXTERIOR PRODUCTS ARE DESIGNED WITH PRECISE VERTICAL AIMING LIMITS, WHICH SHOULD NOT BE EXCEEDED 5. LAMPS: THE PRODUCT IS DESIGNED WITH THE SUPPLIED (LEDS) / LAMP/S AND IT IS STRONGLY RECOMMENDED THAT ANY LAMP /(LEDS) CHANGES (IF ANY) BE MADE IN ACCORDANCE WITH THE TYPE, COLOUR AND BRAND SUPPLIED. PIERLITE AUSTRALIA IS NOT RESPONSIBLE FOR THE PRODUCT PERFORMANCE OF ALTERNATIVE LAMP/S USED. 6. MAINTENANCE: THE SUPPLY MUST BE ISOLATED BEFORE OPENING OR ACCESSING THE LUMINAIRE. PRODUCT MAINTENANCE IS IMPORTANT AND IS CRITICAL TO THE PRODUCTS DESIGNED PERFORMANCE. THE PRODUCT IS TO BE MAINTAINED IN ACCORDANCE WITH THE MANUFACTURER S INSTRUCTIONS. P&Q IS NOT RESPONSIBLE FOR ANY PRODUCT NOT MAINTAINED IN ACCORDANCE WITH THE RECOMMENDED PROCEDURE OR INTERVALS. FOR RECOMMENDED LAMP / LED MAINTENANCE GUIDES, PLEASE REFER TO THE LAMP INSTALLATION GUIDELINES SUPPLIED WITH THE LAMP PRODUCT OR THE NOMINATED LAMP MANUFACTURER S WEBSITE. FOR PRODUCTS SUPPLIED WITH GLASS VISORS OR COVERS, DO NOT OPERATE THE PRODUCT WITH A DAMAGED VISOR OR COVER; IT IS RECOMMENDED THE PRODUCT BE TURNED OFF, AREA SURROUNDING THE PRODUCT VACATED AND THE DAMAGED GLASS REPLACED BY A PROFESSIONAL INSTALLER IMMEDIATELY. 7. ELECTRICAL SUPPLIES: ALWAYS ENSURE THE CORRECT SUPPLY VOLTAGE IS AS THE RATING LABEL ON THE PRODUCT. SLIGHT VARIATIONS OF THE NOMINAL LINE VOLTAGE WITHIN THE RANGE OF +6%/-6% ARE EXPECTED, ALTHOUGH LUMINAIRES SHOULD NOT BE OPERATED CONTINUOUSLY AT MORE THAN +6%/-0% OF THE RATED SUPPLY VOLTAGE OF THE CONTROL GEAR OR TAPPING.

7 IGHTING CONTACT INFORMATION & CONTACT INFORMATION PACKING INFORMATION BOX FOR PC FREELANDER BOX FOR 6 PCS FREELANDERS EGG GRATE BOX BOX * BOX CAN FIT PC FREELANDER * BOX CAN FIT 6PCS FREELANDERS CONTACT INFORMATION ADDRESS COMPANY ADDRESS ROOM 507, NO. 423 XINCUN RD. PUTUO DIST. SHANGHAI, CHINA - FACTORY ADDRESS NO. 238 HENGZHAI RD. SHESHAN TOWN, SONGJIANG DIST. SHANGHAI, CHINA TELEPHONE NO. BUSINESS OFFICE QUALITY DEPARTMENT COMPLAINT & ADVISE MAIL BOX PRODUCTS CONSULTANT WILLIAM@PNQLIGHTING.COM DAVID@PNQLIGHTING.COM - QUALITY & DESIGN INFORMATION JACK@PNQLIGHTING.COM -