GAIL (India) Limited (A Government of India Undertaking) (A Navratna Company)

Transcription

1 TIN : GAIL (India) Limited (A Government of India Undertaking) (A Navratna Company) P.O. GAIL COMPLEX, VIJAIPUR DISTT. GUNA, MP Ph: Fax: vijpcp@gail.co.in ECC NO: AAACG1209JXM004 REQUEST FOR QUOTATION To, GAIL WEBSITE VENDOR, India Vendor Code : RFQ No. :GAIL/VH/08/M107/ /MECH Date: RFQ Due on : at 14:00 Hrs IST Tender Opening Date : at Hrs IST Dear Sir(s)/Madam, GAIL (India) Ltd. invites you to submit your offer in sealed envelope, superscribing RFQ No. & Due date for the following item(s) in complete accordance with enquiry documents/attachments: Sl. No MatCode UOM QTY Unit Price Description (in figures & words) Group : 1 DRILLING MACHINE MAKE: WOLF MODEL: EG 3C TYPE: SENSITIVE DRILLING CAPACITY IN STEEL: DRILLING CAPACITY IN CAST IRON: DRILLING DEPTH: WORKING LENGTH: MAXIMUM SPINDLE SPEED: MOTOR: EACH 1 DRILLING M/C,LIGHT DUTY,WOLF,EG3C COMPLETE UNIT,LIGHT DUTY COMPLETE UNIT EJ3c 10MM LIGHT-DUTY DRILL MAKE: RALLI WOLF OR EQ. Group : 2 Regd. Office: 16, Bhikaiji Cama Place, R. K. Puram, New Delhi Page 1 of 22

2 DIMENSION SERIES: METRIC DRILL BIT MATERIAL: HSS SHANK TYPE: STRAIGHT STANDARD: TYPE: TWIST EACH 4 DRILL,TWIST,STRAIGHT SHANK,HSS,1MM SIZE: 1.0 MM MAKE: MIRINDA/EVEREST/IT/JK/ADDISON OR EQ EACH 4 DRILL,TWIST,STRAIGHT SHANK,HSS,1.5MM SIZE: 1.5 MM MAKE: MIRINDA/EVEREST/IT/JK/ADDISON OR EQ EACH 4 DRILL,TWIST,STRAIGHT SHANK,HSS,2MM SIZE: 2.0 MM MAKE: MIRINDA/EVEREST/IT/JK/ADDISON OR EQ EACH 4 DRILL,TWIST,STRAIGHT SHANK,HSS,2.5MM SIZE: 2.5 MM STANDARD: IS 5101 TYPE: STRAIGHT SHANK MAKE: MIRINDA/EVEREST/IT/JK/ADDISON OR EQ EACH 4 DRILL,TWIST,STRAIGHT SHANK,HSS,3MM SIZE: 3.0 MM MAKE: MIRINDA/EVEREST/IT/JK/ADDISON OR EQ EACH 4 DRILL,TWIST,STRAIGHT SHANK,HSS,3.5MM SIZE: 3.5 MM Page 2 of 22

3 MAKE: MIRINDA/EVEREST/IT/JK/ADDISON OR EQ EACH 4 DRILL,TWIST,STRAIGHT SHANK,HSS,4MM SIZE: 4.0 MM MAKE: MIRINDA/EVEREST/IT/JK/ADDISON OR EQ EACH 4 DRILL,TWIST,STRAIGHT SHANK,HSS,4.5MM SIZE: 4.5 MM MAKE: MIRINDA/EVEREST/IT/JK/ADDISON OR EQ EACH 4 DRILL,TWIST,STRAIGHT SHANK,HSS,5MM SIZE: 5.0 MM MAKE: MIRINDA/EVEREST/IT/JK/ADDISON OR EQ. Group : 3 DIMENSION SERIES: METRIC DRILL BIT MAKE: MATERIAL: HSS MODEL: GSC-3.5 SHANK TYPE: PARALLEL STANDARD: IS TYPE: TWIST EACH 4 DRILL,TWIST,PARALLEL SHANK,HSS,5.5MM SIZE: 5.5 MM MAKE: MIRINDA/EVEREST/IT/JK/ADDISON OR EQ. Group : 4 Page 3 of 22

4 DIMENSION SERIES: METRIC DRILL BIT MATERIAL: HSS SHANK TYPE: STRAIGHT STANDARD: TYPE: TWIST EACH 2 DRILL,TWIST,STRAIGHT SHANK,HSS,6MM SIZE: 6.0 MM MAKE: MIRINDA/EVEREST/IT/JK/ADDISON OR EQ EACH 2 DRILL,TWIST,STRAIGHT SHANK,HSS,7MM SIZE: 7.0 MM MAKE: MIRINDA/EVEREST/IT/JK/ADDISON OR EQ EACH 2 DRILL,TWIST,STRAIGHT SHANK,HSS,8MM SIZE: 8.0 MM MAKE: MIRINDA/EVEREST/IT/JK/ADDISON OR EQ. Group : 5 TYPE: SLOGGING, DOUBLE HEX WRENCH EACH 2 WRENCH,SLOGGING DBL,HEX,32MM MAKE: MEKASTER SIZE: 32 MM HEAVY DUTY SLOGGING WRENCH, DOUBLE HEXAGONAL,SHORT STRONG PROFILED HANDLE, MATERIAL: DROP FORGED CHROME VANADIUM STEEL AS PER IS-4509 MAKE: EVEREST/JHALANI/TAPARIA /MEKASTER OR EQ. Page 4 of 22

5 Group : 6 FINISH: HANDLE MATERIAL: MAKE: JALANI/TAPARIA OR EQUIVALENT MATERIAL: STANDARD: TYPE: SLUGGING WRENCH EACH 2 WRENCH,SLUGGING,34MM SIZE: 34 MM HEAVY DUTY SLOGGING WRENCH, DOUBLE HEXAGONAL,SHORT STRONG PROFILED HANDLE, MATERIAL: DROP FORGED CHROME VANADIUM STEEL AS PER IS-4509 MAKE: EVEREST/JHALANI/TAPARIA /MEKASTER OR EQ. Group : 7 TYPE: SLOGGING, DOUBLE HEX WRENCH EACH 2 WRENCH,SLOGGING DBL,HEX,36MM,P/N-MSS-361 MAKE: MEKASTER SIZE: 36 MM PART NO: MSS-361 HEAVY DUTY SLOGGING WRENCH, DOUBLE HEXAGONAL,SHORT STRONG PROFILED HANDLE, MATERIAL: DROP FORGED CHROME VANADIUM STEEL AS PER IS-4509 MAKE: EVEREST/JHALANI/TAPARIA /MEKASTER OR EQ EACH 1 WRENCH,SLOGGING DBL,HEX,38MM,P/N-MSS-381 MAKE: MEKASTER SIZE: 38 MM PART NO: MSS-381 Page 5 of 22

6 HEAVY DUTY SLOGGING WRENCH, DOUBLE HEXAGONAL,SHORT STRONG PROFILED HANDLE, MATERIAL: DROP FORGED CHROME VANADIUM STEEL AS PER IS-4509 MAKE: EVEREST/JHALANI/TAPARIA /MEKASTER OR EQ. Group : 8 SPANNER TYPE: SLOGGING OPEN EACH 2 SPANNER,SLUGGING,S,E OPEN,SET SPANNER,SLUGGING,S,E OPEN,SET SIZE: 34MM, GERMAN TYPE ENGINEER'S SPANNER WITH LONG HANDLE AND WITH A RAISED COLLAR AROUND THE OPEN END. DROP FORGED CHROME VANADIUM STEEL WITH HEAD SET AT 15 DEG ANGLE AS PER IS-2028 MAKE: EVEREST/JHALANI/TAPARIA /MEKASTER OR EQ. Group : 9 MAKE: JHALANI/TAPARIA OR EQUIVALENT SPANNER TYPE: METRIC SERIES TYPE: SINGLE OPEN END EACH 2 SPANNER,SINGLE OPEN END,36MM,IS MOC: DROP FORGED CHROME VANADIUM STEEL SIZE: 36 MM Page 6 of 22

7 GERMAN TYPE ENGINEER'S SPANNER WITH LONG HANDLE AND WITH A RAISED COLLAR AROUND THE OPEN END. DROP FORGED CHROME VANADIUM STEEL WITH HEAD SET AT 15 DEG ANGLE AS PER IS-2028 MAKE: EVEREST/JHALANI/TAPARIA /MEKASTER OR EQ EACH 1 SPANNER,SINGLE OPEN END,38MM MOC: DROP FORGED CHROME VANADIUM STEEL SIZE: 38 MM STANDARD CONFORM TO IS 2028 GERMAN TYPE ENGINEER'S SPANNER WITH LONG HANDLE AND WITH A RAISED COLLAR AROUND THE OPEN END. DROP FORGED CHROME VANADIUM STEEL WITH HEAD SET AT 15 DEG ANGLE AS PER IS-2028 MAKE: EVEREST/JHALANI/TAPARIA /MEKASTER OR EQ. Group : 10 FINISH: MAKE: MATERIAL: CARBON STEEL SOCKET STANDARD: TYPE: HEXAGONAL TYPE: METRIC SERIES EACH 2 SOCKET,SQ.DRIVE 1/2IN,34MM DRIVE: 1/2IN SIZE: 34 MM 1/2" SQUARE DRIVE HEAVY DUTY SOCKET MAKE: EVEREST/JHALANI/TAPARIA /MEKASTER OR EQ EACH 2 SKT,3/4IN,D\HEX,SQ.DRV,36MM,P/N-MLM-336 Page 7 of 22

8 DRIVE: 3/4IN MAKE: MEKASTAR SIZE: 36 MM PART NO: MLM-336 3/4" SQUARE DRIVE HEAVY DUTY SOCKET MAKE: EVEREST/JHALANI/TAPARIA /MEKASTER OR EQ EACH 2 SOCKET,38MM SIZE: 38 MM 3/4" SQUARE DRIVE HEAVY DUTY SOCKET MAKE: EVEREST/JHALANI/TAPARIA /MEKASTER OR EQ. Group : 11 ENGINEERING FILES MAKE: MATERIAL: SHAPE: STANDARD: TOOTH DESIGN: EACH 2 FILE,NEEDLE SET-160MM FILE,NEEDLE SET CONSIST MINIMUM 10 NOS. OF DEFFERENT TYPE OF NEEDLE FILES. MAKE: JK/ESCON OR EQ. Group : 12 FRAME STANDARD: TYPE: HACKSAW EACH 2 FRAME,HACKSAW,300MM SIZE: 12 IN Page 8 of 22

9 MAKE: PYE/EVEREST OR EQ. Group : 13 TAP THREAD TYPE: UNF MATERIAL: FLUTE TYPE: NUMBER OF FLUTE: CUT: THREAD LENGTH: OVERALL LENGTH: MAKE: STANDARD: EACH 2 TAP,HSS,UNF,1/4IN SIZE: 1/4 IN EACH SIZE CONSIST OF 3 PCS. i.e. ROUGH,/MEDIUM/FINE MAKE: IT/ALPS/SMT OR EQ EACH 2 TAP,HSS,UNF,3/8IN SIZE: 3/8 IN EACH SIZE CONSIST OF 3 PCS. i.e. ROUGH,/MEDIUM/FINE MAKE: IT/ALPS/SMT OR EQ EACH 2 TAP,HSS,UNF,1/2IN SIZE: 1/2 IN EACH SIZE CONSIST OF 3 PCS. i.e. ROUGH,/MEDIUM/FINE MAKE: IT/ALPS/SMT OR EQ. Group : 14 Page 9 of 22

10 CUT: FLUTE TYPE: MAKE: MATERIAL: NUMBER OF FLUTE: OVERALL LENGTH: STANDARD: TAP THREAD LENGTH: THREAD TYPE: UNC EACH 2 TAP,HSS,UNC,1/4IN SIZE: 1/4 IN EACH SIZE CONSIST OF 3 PCS. i.e. ROUGH,/MEDIUM/FINE MAKE: IT/ALPS/SMT OR EQ EACH 2 TAP,HSS,UNC,3/8IN SIZE: 3/8 IN EACH SIZE CONSIST OF 3 PCS. i.e. ROUGH,/MEDIUM/FINE MAKE: IT/ALPS/SMT OR EQ SET 1 TAP,HSS,UNC,5/8IN SIZE: 5/8 IN MAKE: TOTEM EACH SIZE CONSIST OF 3 PCS. i.e. ROUGH,/MEDIUM/FINE MAKE: IT/ALPS/SMT OR EQ EACH 1 TAP,HSS,UNC,3/4IN SIZE: 3/4 IN EACH SIZE CONSIST OF 3 PCS. i.e. ROUGH,/MEDIUM/FINE MAKE: IT/ALPS/SMT OR EQ. Page 10 of 22

11 EACH 1 TAP,HSS,UNC,1/2IN SIZE: 1/2 IN EACH SIZE CONSIST OF 3 PCS. i.e. ROUGH,/MEDIUM/FINE MAKE: IT/ALPS/SMT OR EQ. Group : 15 CUT: FLUTE TYPE: MAKE: TOTEM, SAP OR EQUIVALENT MATERIAL: HSS NUMBER OF FLUTE: OVERALL LENGTH: STANDARD: IS TAP THREAD LENGTH: TYPE: METRIC SERIES EACH 1 TAP,SET W/ACC,3-24MM SIZE: 3-24 MM WITH ACCESSORIES SET CONSIST OF SIZES- 3,3.5,4,4.5,5,5.5,6,8,10,12,14,16,18,20,22,24 MM (EACH SIZE CONSIST OF 3 PCS. i.e. ROUGH,/MEDIUM/FINE) MAKE: TOTEM/IT/ALPS/SMT OR EQ. Group : 16 HAMMER, NON-SPARKING TYPE: ALL TYPES EACH 1 HAMMER,CLAW,600GM LENGTH: 350MM WEIGHT: 600GM MAKE: JHALANI/TAPARIA/MEKASTER/ TOTEM OR EQ. Page 11 of 22

12 Group : 17 CHISEL TYPE: FLAT EACH 1 CHISEL,FLAT CHISEL,FLAT CHISEL SET CONSIST OF SIZES- (OCTAGONAL-9x125/16x150/22x200/flat-20x150/25x200)-5 pcs set MAKE: EVEREST/TAPARIA OR EQ. Group : 18 MAKE: JHALANI/TAPARIA OR EQUIVALENT SPANNER TYPE: COMBINATION,RING & OPEN EACH 5 SPANNER,COMB,RING&OPEN END,5/16IN SIZE: 5/16 IN MAKE: JHALANI/TAPARIA/MEKASTER/ TOTEM OR EQ EACH 5 SPANNER,COMB,RING&OPEN END,3/8IN SIZE: 3/8 IN MAKE: JHALANI/TAPARIA/MEKASTER/ TOTEM OR EQ. Group : 19 Page 12 of 22

13 TAP THREAD TYPE: UNF MATERIAL: FLUTE TYPE: NUMBER OF FLUTE: CUT: THREAD LENGTH: OVERALL LENGTH: MAKE: STANDARD: SET 2 TAP,HSS,UNF,TOTEM,5/16IN SIZE: 5/16 IN MAKE: TOTEM EACH SIZE CONSIST OF 3 PCS. i.e. ROUGH,/MEDIUM/FINE MAKE: IT/ALPS/SMT OR EQ. Group : 20 DIE SHAPE: CIRCULAR TYPE: THREAD MATERIAL: HSS HANDLE CUT: MAKE: STANDARD: SET 1 DIES,THREAD CS,INCH,UNF,1/4 To 1-1/2IN SIZE: 1/4 To 1-1/2 UNF IN ROUND DIES, SET CONSIST OF SIZES: 1/4",5/16",3/8",7/16",1/2",9/16",5/8",3/4",7/8",1",1-1/8",1-1/4", 1-3/8",1-1/2" MATERIAL: CARBON STEEL MAKE: TOTEM/IT/ALPS/SMT OR EQ SET 1 DIES,THREAD CS,INCH,UNC,1/4 To 1-1/2IN SIZE: 1/4 To 1-1/2 UNC IN Page 13 of 22

14 ROUND DIES, SET CONSIST OF SIZES : 3/8",7/16",1/2",9/16",5/8",3/4",7/8",1",1-1/8",1-1/4",1-3/8",1-1/2" MATERIAL: CARBON STEEL MAKE: TOTEM/IT/ALPS/SMT OR EQ. Group : 21 DIE SHAPE: TYPE: METRIC SERIES MATERIAL: HSS HANDLE: CUT: MAKE: TOTEM STANDARD: SET 1 DIE,SET,2 To 24 MM SIZE: 2 To 24 MM ROUND DIES, SET CONSIST OF SIZES: 2,3,4,5,6,7,8,10,12,14,16,18,20,22, 24 MM, MATERIAL: CARBON STEEL MAKE: TOTEM/IT/ALPS/SMT OR EQ. Group : 22 MAKE: JHALANI/TAPARIA OR EQUIVALENT SPANNER TYPE: METRIC SERIES TYPE: SINGLE OPEN END EACH 2 SPANNER,SINGLE OPEN END,32MM FINISH: BLACK MOC: FORGED SPECIAL STEEL OFFSET: 15 DEGREE SIZE: 32 MM Page 14 of 22

15 GERMAN TYPE ENGINEER'S SPANNER WITH LONG HANDLE AND WITH A RAISED COLLAR AROUND THE OPEN END. DROP FORGED CHROME VANADIUM STEEL WITH HEAD SET AT 15 DEG ANGLE AS PER IS-2028 MAKE: EVEREST/JHALANI/TAPARIA /MEKASTER OR EQ. Group : 23 TYPE: SLOGGING, DOUBLE HEX WRENCH EACH 1 WRENCH,SLOGGING,RING END,80MM SIZE: 80 MM HEAVY DUTY SLOGGING WRENCH, DOUBLE HEXAGONAL,SHORT STRONG PROFILED HANDLE, MATERIAL: DROP FORGED CHROME VANADIUM STEEL AS PER IS-4509 MAKE: EVEREST/JHALANI/TAPARIA /MEKASTER OR EQ. Group : 24 MAKE: JHALANI/TAPARIA OR EQUIVALENT SPANNER TYPE: METRIC SERIES TYPE: SINGLE OPEN END EACH 1 SPANNER,SINGLE OPEN END,80MM FINISH: BLACK MOC: FORGED SPECIAL STEEL OFFSET: 15 DEGREE SIZE: 80 MM GERMAN TYPE ENGINEER'S SPANNER WITH LONG HANDLE AND WITH A RAISED COLLAR AROUND THE OPEN END. DROP FORGED CHROME VANADIUM STEEL WITH HEAD SET AT 15 DEG ANGLE AS PER IS-2028 MAKE: EVEREST/JHALANI/TAPARIA /MEKASTER OR EQ. Group : 25 Page 15 of 22

16 MAKE: JHALANI/TAPARIA OR EQUIVALENT SPANNER TYPE: COMBINATION,RING & OPEN EACH 5 SPANNER,COMB,RING&OPEN END,7/16IN SIZE: 7/16 IN MAKE: JHALANI/TAPARIA/MEKASTER/ TOTEM OR EQ EACH 5 SPANNER,COMB,RING&OPEN END,1/2IN SIZE: 1/2 IN MAKE: JHALANI/TAPARIA/MEKASTER/ TOTEM OR EQ. Group : 26 SCADA SYSTEM (ContINued from ) EACH 4 SCREWDRIVER,LG SLOT,1/8IN ASSY: TEST EQUIPMENT & TOOLS, SUB ASSY: TOOLS SCREWDRIVER, LONG SLOT SIZE: 1/8 IN BLADE LENGTH=75MM, BLADE DIA = 3MM, TIP DIMENSIONS = 1.6x0.4 MM MAKE: EQUIVALENT TO TAPARIA MODEL 933 Group : 27 DRIVER MAKE: JHALANI/TAPARIA OR EQUIVALENT TYPE: INCH SERIES TYPE: SCREW EACH 4 SCREWDRIVER,4IN SIZE: 4 IN Page 16 of 22

17 BLADE LENGTH=100MM, BLADE DIA = 4MM, TIP DIMENSIONS = 4.3x0..6 MM MAKE: EQUIVALENT TO TAPARIA MODEL EACH 4 SCREW DRIVER SCREW DRIVER,SET BLADE LENGTH=75MM, BLADE DIA = 5MM, TIP DIMENSIONS = 5.0x0..6 MM MAKE: EQUIVALENT TO TAPARIA MODEL EMD Details : WITH REFRENCE TO CLAUSE NO.11 (i) OF G.P.C, OFFER SHOULD ACCOMPANY EMD/ BID OF QUOTED VALUE OR RS WHICHEVER IS MORE IN THE FORM OF DEMAND DRAFT IN FAVOUR OF GAIL (INDIA) LTD PAYABLE AT STATE BANK OF INDIA (BRANCH CODE 6635) OR IN THE FORM OF BANK GUARANTEE IF QUOTED VALUE IS MORE THAN Rs. 01 (ONE) LAC. Page 17 of 22

18 Instruction to Bidders : 1. YOUR OFFER SHOULD BE VALID FOR 03 MONTHS FROM THE DATE OF TENDER OPENING. 2. PLEASE MENTION THE "MAKE" OF THE ITEM CLEARLY IN YOUR OFFER.IN CASE BIDDER IS QUOTING EQUIVALENT PRODUCT/MAKE BIDDER HAS TO FURNISH DOCUMENTARY EVIDENCE SUBSTANTIATING BEC AND EQUIVALENCE. 3. BIDDER IS REQUESTED TO SUBMIT : (a) DULY FILLED -IN,SIGNED & STAMPED ANNEXURE-I (FORMAT FOR TERMS,CONDITION TAXES & DUTIES) (b) THIS RFQ AND GENERAL PURCHASE CONDITIONS ; ALONG WITH THEIR OFFER. 4. BIDDER IS REQUESTED TO CLEARLY MENTION RFQ NO. & BID DUE DATE OF OPENING AT THE TOP LEFT HAND COVER OF THE ENVELOPE. 5. CONDITIONAL,LATE OFFERS SHALL NOT BE ENTERTAINED. 6. BIDS COMPLETE IN ALL RESPECT SHOULD REACH ON OR BEFORE THE BID DUE DATE AND TIME. BIDS THROUGH FAX/ SHALL NOT BE CONSIDERED 7 GAIL SHALL NOT ISSUE CONCESSIONAL FORM /FORM "C" FOR THIS PURCHASE, PLEASE QUOTE SALES TAX ACCORDINGLY. 8. PLEASE FURNISH A CATALOGUE/ WRITEUP OF QUOTED ITEMS INDICATING DETAILED SPECIFICATIONS ALONG WITH OFFER. 9. REJECTION CRITERIA : A. PLEASE NOTE THAT THIS RFQ IS ON "ZERO DEVIATION" BASIS. GAIL WILL ACCEPT OFFERS BASED ON TERMS AND CONDITIONS OF RFQ ONLY. DEVIATION TO TERMS AND CONDITIONS OF RFQ MAY LEAD TO REJECTION OF OFFER. B. DEVIATION TO THE FOLLOWING CLAUSES OF RFQ SHALL LEAD TO REJECTION OF BID: (I) FIRM PRICE (II) EMD/ BID BOND, IF APPLICABLE (III)SCOPE OF WORK/ SPECIFICATIONS (IV) PRICE SCHEDULE/ PRICE BASIS (V) PERIOD OF VALIDITY OF BID. (VI) PRICE REDUCTION SCHEDULE (VII) DELIVERY PERIOD (VIII) PERFORMANCE BANK GUARANTEE/ SECURITY DEPOSIT, WHEREVER APPLICABLE. (IX) WARANTEE/GUARANTEE CLAUSE (X) ARBITRATION/ JURISDICTION OF COURT (XI) FORCE MAJEURE 10. TECHNICAL AND COMMERCIAL QUERIES (TQ/CQ), IF REQUIRED MAY BE ISSUED TO ONLY THOSE BIDDERS WHOSE BIDS ARE FOUND PRIMA-FACIE RESPONSIVE, FOR SEEKING Page 18 of 22

19 CLARIFICATION ONLY. THE REQUEST FOR SUCH CLARIFICATIONS AND THE RESPONSE SHALL BE IN WRITING AND NO CHANGE IN THE PRICE OR SUBSTANCE OF BIDS SHALL BE SOUGHT, OFFERED OR PERMITTED. THE SUBSTANCE OF THE BID INCLUDES BUT NOT LIMITED TO PRICE, DELIVERY/COMPLETION, SCOPE, SPECIFICATION ETC. 11. IN CASE OF ANY CLARIFICATION, PLEASE CONTACT : GM (C&P) GAIL (INDIA) LTD, PO GAIL COMPLEX, VIJAIPUR, DIST. GUNA M.P. TEL: , FAX: vijpcp@gail.co.in / psnabiyal@gail.co.in 12. PRE-TENDERING CONFERENCE: FOR ANY QUERY ON RFQ PTC SHALL HELD 1½ WEEKS AFTER RFQ ISSUE DATE. IF SAME HAPPENS TO BE HOLIDAY, PTC SHALL HELD ON NEXT WORKING DAY. Price Basis : FOT GUNA BASIS Delivery/Completion Schedule : WITHIN 6 WEEKS FROM DATE OF ISSUE OF P.O Terms of delivery : THROUGH ROAD TRANSPORT (PREFERABLY BY TCI/ETO WHO HAVE THEIR OFFICES IN GUNA, M.P.). TRANSIT INSURANCE SHALL BE ARRANGED BY GAIL. DATE OF L.R SHALL BE CONSIDERED AS DATE OF DELIVERY. Consignee Address : GM(C&P) GAIL (INDIA) LTD., PO GAIL COMPLEX, VIJAIPUR DISTT.- GUNA M.P PHONE: , FAX: vijpcpgail.co.in Terms of payment : 100% PAYMENT SHALL BE RELEASED WITHIN 15 DAYS AFTER RECEIPT AND ACCEPTANCE OF ITEMS AT SITE. PAYMENT SHALL BE RELEASED DIRECTLY TO YOUR BANK ACCOUNT THROUGH E-BANKING ONLY. PLEASE PROVIDE YOUR BANK ACCOUNT NO. IN ANY BRANCH OF SBI/ HDFC/ ICICI BANK WHICH HAS E-BANKING FACILITY. IN CASE BIDDER DOES NOT HAVE ACCOUNT IN ANY OF ABOVE MENTIONED BANK, PLEASE CONFIRM THAT PAYMENT SHALL BE ACCEPTED THROUGH E-BANKING CHANNELS OF SBI/ HDFC/ ICICI BANK IN THE EVENT OF RECEIPT OF ORDER FROM GAIL. Page 19 of 22

20 Warranties : WARRANTY PERIOD SHALL BE 12 MONTHS FROM DATE OF OPERATION OR 24 MONTHS FROM THE DATE OF DESPATCH WHICH EVER IS EARLIER. Price Reduction Schedule : APPLICABLE AS PER GAIL GPC Performance Bank Guarantee : APPLICABLE AS PER GAIL'S GPC (ENCLOSED) Other contractual stipulations : BIDDER'S ELIGIBILITY CRITERIA : BIDDER SHOULD EITHER BE A MANUFACTURER / AN AUTHORIZED DISTRIBUTOR / AN AUTHORIZED DEALER OF MANUFACTURER OF SIMILAR ITEMS AS SPECIFIED IN RFQ/TENDER ENQUIRY. IN SUPPORT OF ABOVE, A VALID DOCUMENTARY PROOF OF BEING MANUFACTURER [NSIC / SSI CERTIFICATE, ISO CERTIFICATE, EXCISE REGISTRATION CERTIFICATE / EQUIVALENT CERTIFICATE OF STATUTORY AUTHORITY ETC.] OR "CERTIFICATE OF AUTHORIZED DISTRIBUTORSHIP" / "CERTIFICATE OF AUTHORIZED DEALERSHIP" BY MANUFACTURER FOR REQUIRED MATERIALS AS SPECIFIED IN RFQ / TENDER ENQUIRY MUST BE SUBMITTED ALONG WITH THE OFFER. FAILING ABOVE, OFFER SHALL BE LIABLE TO BE REJECTED. Special Conditions of Contract : 1. BIDDERS ARE REQUESTED TO SUBMIT THEIR OFFER ALONG WITH TENDER DOCUMENTS DULY SIGNED & STAMPED DULY NUMBERED IN EACH PAGE. 2. ALL PAGESE OF THE BID TO BE SIGNED AND SEALED BY AUTHORISED PERSON OF THE BIDDER. 3. PLEASE SUBMIT SAMPLE /CATALOGUES & THE DETAILED SPECIFICATION ALONG WITH OFFER. Enclosures : 1. ANNEXURE - I FORMAT FOR GENERAL TERMS & CONDITIONS. 2. GENERAL PURCHASE CONDITIONS (GPC) 3. PROFORMA-1: FOR CREATION/ADDITION OF BANK ACCOUNT DETAILS 4. PROFORMA-2: FOR UPDATION/MODIFICATION OF EXISTING BANK ACCOUNT DETAILS 5. FORMAT FOR CONFRMATION ON APPLICABILITY OF "MICRO, SMALL AND MEDIUM ENTERPRISES DEVELOPMENT ACT, 2006 [MSMED ACT 2006)" Page 20 of 22

21 Bid Evaluation Area : THE EVALUATION OF ALL THE RESPONSIVE BIDS SHALL BE DONE ON ITEM WISE BASIS SO AS TO ARRIVE AT THE LOWEST EVALUATED OFFER AS UNDER : i) EX-WORKS PRICE QUOTED BY THE BIDDER (INCLUDING PACKING & FORWARDING CHARGES) ii) EXCISE DUTY ON THE FINISHED GOODS. III) SALES TAX ON THE FINISHED GOODS iv) FREIGHT CHARGES TO PURCHASER'S SITE. Important : 1. Percentage of Taxes, Duties, P&F, Freight charges etc. of quoted basic price should be clearly mentioned in the quotation. 2. Please go through the General Purchase Conditions (GPC) enclosed as Annexure. Deviations to GPC shall liable for rejection of your offer. 3. Please submit Catalogue/Specification Details, Test Certificates/Traceability Certificate for accuracy along with your quotation. Yours truly, For and on behalf of GAIL ( India ) Ltd. (Authorized signatory) Page 21 of 22

22 ANNEXURE-I FORMAT FOR TERMS, CONDITIONS, TAXES AND DUTIES (HVJ) (PLEASE SUBMIT THIS ANNEXURE ALONG WITH OFFER FOR DETAILED EVALUATION OF YOUR OFFER) SL. NO. DESCRIPTION DETAILS/ CONFIRMATION A. OFFER REF. NO.. DATE. NAME OF BIDDER TELEPHONE/MOBILE NO ID.. B FAX NO DOCUMENTS SUBSTANTIATING BEC HAS BEEN SUBMITTED AS UNDER: C DESCRIPTION : BIDDERS CONFIRMATIONS DETAILS OF DOCUMENTS SUBSTANTIATNG BIDDER S ELIGIBILITY CRITERIA ( BEC ) I PERIOD OF VALIDITY OF BID II III IV V VI VII VII VIII DETAILS OF EMD/ BID BOND ACCEPTANCE OF FIRM PRICE DURING THE CURRANCY OF CONTRACT. P & F (IF,APPLICABLE) EXCISE DUTY EXCISE CHAPTER ID IF EXCISE DUTY IS APPLICABLE/INCLUSIVE, PLEASE CONFIRM SUBMISSION OF EXCISE INVOICE AT THE TIME OF SUPPLY VAT / CST (WITHOUT FORM C / FORM - 33) ANY OTHER TAXES (IF ANY) IX TAX IDENTIFICATION NO. ( TIN) X ECC NO. XI FREIGHT CHARGES(IF APPLICABLE).%(OF BASIC PRICE) OR RS XII DELIVERY TERM

23 XIII XIV XV XVI PAYMENT TERMS ACCEPTANCE TO ALL THE TERMS & CONDITIONS OF GENERAL PURCHASE CONDITION OF RFQ IN CASE BIDDER IS QUOTING EQUIVALENT PRODUCT/MAKE, MAKE AND DOCUMENTARY EVIDENCE FOR SUBSTANTIATING EQUIVALENCE AND MEETING BEC. BANK A/C NO. IN SBI/ HDFC/ ICICI BRANCH WHICH HAS E-BANKING FACILITY. NAME OF MAKE:.. DOCUMENTS SUBSTANTIATING EQUIVALENCE AND MEETING BEC: BANK:.. ACCOUNT NO. : BRANCH CODE: NOTE: PLEASE SUBMIT THIS FORMAT DULY FILLED ALONG WITH YOUR OFFER. PLACE: DATE: SIGNATURE OF AUTHORISED SIGNATORY NAME: DESIGNATION: SEAL:

24

25

26 REF: GAIL/VIJP/E-BANKING/TENDER NO. GAIL/V FORMAT FOR "e-banking" (CREATION/ADDITION) Dated: Sub: E-payment to Vendors/Contractors/Customers Dear Sir/Madam, We are pleased to inform you that GAIL has adopted e-payment system for all Vendors/Contractors/Customers through e-banking to avoid delay in payment, loss of instrument like DD/Cheque in transit, etc and ensure faster payment. In view of above, you being a valuable Customer/Contractor/Vendor to GAIL, are requested to open your account in any of the designated bank as given below for making payment to you through e-banking: 1. State Bank of India 2. ICICI Bank 3. HDFC Bank To facilitate this transaction, you are requested to forward us the following two documents (format enclosed) duly filled in, stamped and signed by authorized signatory at the earliest. 1. Format -1: This format is to be filled by the Vendor/Customer/Contractor on their letter head 2. Format -2: This format is to be filled by the Banker (of Vendor/Customer/Contractor) on their letter head On receipt of above mentioned documents, your bank account details will be created/added in our e-banking system. Payment against existing/future contracts/orders (if any) shall be directly made to your account with intimation to you. Please arrange to forward your authorization in prescribed formats at the earliest. Thanking you, Yours truly, For & on behalf of GAIL (India) Limited (Authorised Signatory)

27 (CREATION/ADDITION) Format-1 [FORMAT APPLICABLE FOR VENDORS/CUSTOMERS/CONTRACTORS DESIROUS OF RECEIVING PAYMENT THROUGH E-BANKING IN THEIR ACCOUNT WITH SBI/HDFC/ICICI BANK DIRECTLY] THIS FORMAT IS TO BE FILLED BY THE VENDOR/CUSTOMER/CONTRACTOR ON THEIR LETTER HEAD REF: GAIL/VIJP/E-BANKING/TENDER NO. GAIL/V Dated: To, M/s GAIL (India) Ltd, GAIL Complex, Vijaipur, Distt: Guna (M.P.) Sub: Consent for receiving payment through e-banking directly in our account maintained in SBI/HDFC/ICICI Bank. Dear Sir/Madam, We are pleased to forward our consent to receive payment directly to our bank account through e-banking. Required details are given below: 1. Vendor/Customer s name with detail address: Tel no Fax No. Id: 2. Vendor Code: (As mentioned in address block of RFQ issued by GAIL) 3. Name of bank with detail address: Tel no Fax No. Id: 4. Branch code : 5. Bank account no.: 6. Account type (Current/Saving): 7. MICR code: Further to above, please find herewith our bank details duly verified /furnished by our banker for creation/addition in your e-banking system and releasing payment directly to our bank account accordingly. Thanking you, (Authorized Signatory with name and seal)

28 (CREATION/ADDITION) Format-2 [FORMAT APPLICABLE FOR VENDORS/CONTRACTORS/CUSTOMERS DESIROUS OF RECEIVING PAYMENT THROUGH E-BANKING IN THEIR ACCOUNT WITH SBI/HDFC/ICICI BANK DIRECTLY] THIS FORMAT IS TO BE FILLED BY THE BANKER (OF VENDOR/CUSTOMER/CONTRACTOR) ON THEIR LETTER HEAD REF: GAIL/VIJP/E-BANKING/TENDER NO. GAIL/V Dated: To, M/s Dear Sir/Madam, Sub: Verification/Furnishing of Particulars of Account Holder This has reference to your request for the following Particulars to be furnished/verified from this bank, wherein you have account and the same is in vogue. 1. Name of bank with detail address: Tel no Fax No. Id: 2. Branch code : 3. Account type (Current/Saving): 4. Bank account no.: 5. MICR code: (Authorized Signatory with name and seal)

29 Format F- PROFORMA FOR CONFIRMATION ON APPLICABILITY OF MICRO, SMALL AND MEDIUM ENTERPRISES DEVELOPMENT ACT, 2006 [MSMED ACT 2006) REF: GAIL/VIJP/SME /TENDER NO. You may aware that Micro, Small and Medium Enterprises Development Act 2006 ( MSMED ) has been come into force w.e.f. 2 nd October 2006, which has repealed the provisions of the old Act regarding Small Scale Industrial undertakings. 2. As per the MSMED Act, Enterprises engaged in the manufacture / production of goods or rendering / providing of services are to be classified into Micro, Small and Medium enterprises based on the investment in plant and machinery/equipment. 3. Such Enterprises are required to file a memorandum in the prescribed form to the appropriate authority as mentioned in the MSMED Act. 4. The term Enterprises stated in the above paragraph includes Proprietorship, Hindu undivided family, Association of persons, Cooperative Society, Partnership firms, undertaking or any other legal entity. 5. For your ready reference, the definitions of Micro, Small and Medium enterprises are given below: Classification of enterprises engaged in: (a) (b) Manufacture or production of goods pertaining to any industry specified in the First Schedule to the Industries (Development and Regulation) Act 1951 as: Nature of Enterprise Investment in Plant & Machinery (#) Micro Does not exceed Rs. 25 Lacs Small More than Rs. 25 Lacs but does not exceed Rs. 5 Crores Medium More than Rs. 5 Crores but does not exceed Rs. 10 Crores Providing or rendering services: Nature of Enterprise Investment in Equipment Micro Does not exceed Rs. 10 Lacs Small More than Rs. 10 Lacs but does not exceed Rs. 2 Crores Medium More than Rs. 2 Crores but does not exceed Rs. 5 Crores (#) In calculating the investment in plant & machinery, the cost of pollution control, research and development, industrial safety devices and such other items as may be specified will be excluded 6. You are therefore requested to fill the Format [proforma attached] and submit the same along with proof of valid document/ certificate [indicating registration no.] in your offer. In case same is not submitted along with your offer, it will be presumed that your organization is not a micro, small or medium enterprises as per the provisions of MSMED Act 2006 and consequently you will not be eligible to the benefits admissible under the MSMED Act 2006.

30 Format - (A) CONFIRMATION ON APPLICABILITY OF MICRO, SMALL AND MEDIUM ENTERPRISES DEVELOPMENT ACT, 2006 (MSMED ACT 2006) 1. We confirm that provisions of Micro, Small and Medium Enterprises Development Act 2006 ( MSMED ) are applicable to us and our organization falls under the definition of: a. Micro Enterprise - [ ] b. Small Enterprise - [ ] c. Medium Enterprise - [ ] (Please put a tick in the appropriate box) 2. Copy of proof of valid document/ certificate [indicating registration no.] of being a Micro/ Small/ Medium Enterprises is enclosed. Place: Date: Signature of Authorised Signatory Name: Designation: Seal: Note: In case above Format along with proof of valid document/ certificate [indicating registration no.] is not submitted in offer, it will be presumed that your organization is not a micro, small or medium enterprises as per the provisions of MSMED Act 2006 and consequently you will not be eligible to the benefits admissible under the MSMED Act 2006.