SOCO SYSTEM. Erecting Packing Conveying Sealing Pallet Handling Palletising Pallet Securing.

Transcription

1 SOCO SYSTEM Erecting Packing Conveying Sealing Pallet Handling Palletising Pallet Securing

2 Content Conveying Driven conveyors Drive section for driven roller conveyors Page 1 With Ø 48 plastic rollers. Coupled section for driven roller conveyors Page 3 With Ø 48 plastic rollers. Driven curves Curves with conical rollers 90 Page 5 With two drives for high loadings. Belt conveyors Belt conveyors with roller bedding Page 6 Belt conveyors with plate bedding Page 9 Smooth belts for belt conveyors Page 12 Grip belts for belt conveyors Page 15 Belt conveyors with triplex angles Page 18 Suitable for transport of items that are not suited for sudden transition from inclined to horizontal transport. Belt conveyors with booster Page 19 For gentle transport - up or down. Tel: Fax: info@socosystem.com Web:

3 Content Belt for belt conveyor with booster Page 21 Case sealing Case sealers for random case sizes T-55 Automatic adjustment for case size - Top and bottom closure Page 22 T-602 Fully automatic - Top and bottom closure Page 24 Tel: Fax: info@socosystem.com Web:

4 Driven conveyors Drive section for driven roller conveyors With Ø 48 plastic rollers. The conveyors are used, for instance, where conveyors operate at right angles or where items are pushed from one conveyor to another. Examples of ordering Choose a drive section in the table. Please note that for total lengths exceeding 4 m, the drive section must always be 2 m long. Then choose a coupled section of a length which together with the drive section provides the desired total length. Example 1: 1.5 m driven roller conveyor with 60 mm pitch and, 400 mm width. 1-off item no.: Example 2: 3 m driven roller conveyor with pitch 60 mm, width 400 mm. 1 off item no.: off item no.: Example 3: 6 m driven roller conveyor with pitch 60 mm, width 400 mm. 1 off item no.: off item no.: The conveyors are silent with smooth frames and no sharp edges. Minimum danger of injury - the drive axle is sealed off. Specifications Tubes Axles End bearings Drive unit Ø 48 mm impact-proof plastic. Ø 8 mm aluminium. Plastic insert with stainless steel balls kw or 0.37 kw. Gear Standard 20:1 = 10 m/min. Other gearings available. A frequency control system can be connected directly to the 3- phase motor. Drive Frames Axle pitch Width Length Total length Load Subject to alteration. With polycord belts from coupled axle to each roller. Electro-galvanised steel. 60 or 90 mm. 300, 400, 500, 600 mm. 500, 750, 1000, 1500, 2000, 2500, 3000 mm. Max m depending on the load. 10 kg per roller or max. 75 kg per metre conveyor. Item numbers Width Length* Under 4 m Axle pitch 60/ item no Under 4 m Axle pitch 90/ item no. Over 4 m Axle pitch 60/item no. Over 4 m Axle pitch 90/ item no Tel: Fax: info@socosystem.com Web: 1

5 Width Length* Under 4 m Axle pitch 60/ item no Under 4 m Axle pitch 90/ item no. Over 4 m Axle pitch 60/item no. Over 4 m Axle pitch 90/ item no *Please note that for total lengths exceeding 4 m, the drive section must always be 2 m long. All measurements are in mm. Subject to alteration. Accessories Supports for belt conveyors and driven roller conveyors Coupled section for driven roller conveyors Tel: Fax: info@socosystem.com Web: 2

6 Driven conveyors Coupled section for driven roller conveyors With Ø 48 plastic rollers. Coupled sections are used together with drive sections. Example of ordering Choose drive section. Please note that for total lengths exceeding 4 m, the drive section must always be 2 m long. Then choose a coupled section of a length which together with the drive section provides the desired total length. Specifications Tubes Axles End bearings Drive Frames Axle pitch Width Length Total length Load Ø 48 mm impact-proof plastic. Ø 8 mm aluminium. Plastic insert with stainless steel balls. With polycord belts from coupled axle to each roller. Electro-galvanised steel. 60 or 90 mm. 300, 400, 500, 600 mm. 500, 750, 1000, 1500, 2000, 2500, 3000 mm. Max m depending on the load. 10 kg per roller or max. 75 kg per metre conveyor. Subject to alteration. Item numbers Width Length Axle pitch 60/item no. Axle pitch 90/item no Tel: Fax: info@socosystem.com Web: 3

7 Width Length Axle pitch 60/item no. Axle pitch 90/item no All measurements are in mm. Subject to alteration. Accessories Supports for belt conveyors and driven roller conveyors Drive section for driven roller conveyors Tel: Fax: info@socosystem.com Web: 4

8 Driven curves Curves with conical rollers 90 With two drives for high loadings. The curves are available with guide profiles on both the inside- and the outside. Low guide profile = H1. High guide profile = H2. Driven curves offer smooth product flow. Various gearings and a frequency converter provide adjustability of speed. Large and heavy items can easily be transported. The curves are silent during operation. Specifications Tubes Axles Gear Drive Frames Axle pitch 6. Width Subject to alteration. Impact-proof plastic. Ø 10 mm. Standard 20:1 = 10 M/min. Other gearings are available. A frequency control system can be connected direct to the 3-phase motor. With polycord belts. Electro-galvanised steel. 300, 400, 500, 600 mm. Item numbers Width H1 inside + H1 outside/item no. H1 inside + H2 outside/item no All measurements are in mm. Subject to alteration. Accessories Supports for belt conveyors and driven roller conveyors Tel: Fax: info@socosystem.com Web: 5

9 Belt conveyors Belt conveyors with roller bedding Roller bedding is recommended for lengths over 5 m. Ordering First choose a conveyor of the desired length and width. Then choose a belt of a corresponding length and width. Note! As standard, the motor is fitted on the right side of the belt conveyor, seen in the direction of travel. If the motor needs to be mounted on the left side, this must be stated upon ordering. The construction makes the conveyors ideal for new as well as existing systems. Low noise level and smooth surfaces. An economical solution for long-distance transportation. Specifications Tubes Drive unit Ø 48 mm impact proof plastic kw or 0.37 kw. Gear Standard 40:1 = 10 m/min. Other gearings available. A frequency control system can be connected direct to the 3- phase motor. Frames Width Electro-galvanised steel. 200, 300, 400, 500, 600 mm. Length Available in lengths ranging from 0.75 m to 10 m. Subject to alteration. Item numbers Width Length Item no Not available Not available Tel: Fax: info@socosystem.com Web: 6

10 Width Length Item no Not available Not available Tel: Fax: info@socosystem.com Web: 7

11 Width Length Item no The prices are excluding belts. All measurements are in mm. Subject to alteration. Accessories Supports for belt conveyors and driven roller conveyors Smooth belts for belt conveyors Grip belts for belt conveyors Tel: Fax: info@socosystem.com Web: 8

12 Belt conveyors Belt conveyors with plate bedding Plate bedding is recommended for short conveyors or for transport of light items. Plate bedding with grooves is used for conveyors where width and length are identical or where the conveyor is loaded from the side. Ordering First choose a conveyor of the desired length and width. Then choose a belt of a corresponding length and width. Conveyors with grooved plate bedding always require belts with guide profile. Note! As standard, the motor is fitted on the right side of the belt conveyor seen in the direction of travel. If the motor needs to be mounted on the left side, it must be stated upon ordering. The construction makes the conveyors ideal for new as well as existing systems. Low noise level and smooth surfaces. An economical solution for long-distance transportation. Specifications Tubes Drive unit Ø 48 mm impact proof plastic kw or 0.37 kw. Gear Standard 40:1 = 10 m/min. Other gearings available. A frequency control system can be connected direct to the 3- phase motor. Frames Width Electro-galvanised steel. 200, 300, 400, 500, 600 mm. Length Available in lengths ranging from 0.5 m to 10 m. Subject to alteration. Item numbers Width Length Standard/item no. With grooves/item no Tel: Fax: info@socosystem.com Web: 9

13 Width Length Standard/item no. With grooves/item no Tel: Fax: info@socosystem.com Web: 10

14 Width Length Standard/item no. With grooves/item no The prices are excluding belts. All measurements are in mm. Subject to alteration Accessories Supports for belt conveyors and driven roller conveyors Smooth belts for belt conveyors Grip belts for belt conveyors Tel: Fax: info@socosystem.com Web: 11

15 Belt conveyors Smooth belts for belt conveyors For horizontal transportation or inclines of up to 10. Belts with guide profiles are always used for conveyors where width and length are identical and where the belt conveyor is loaded from the side. Item numbers Width Length Standard/item no. With guide profile/item no Tel: Fax: info@socosystem.com Web: 12

16 Width Length Standard/item no. With guide profile/item no Tel: Fax: info@socosystem.com Web: 13

17 Width Length Standard/item no. With guide profile/item no All measurements are in mm. Subject to alteration. Belt with guide profile. Tel: Fax: info@socosystem.com Web: 14

18 Belt conveyors Grip belts for belt conveyors Grip belts are recommended for inclines ranging from 10º to 28º. Belts with guide profiles are used for conveyors where width and length are identical or where the conveyor is loaded from the side. Item numbers Width Length Standard/item no. With guide profile/item no Tel: Fax: info@socosystem.com Web: 15

19 Width Length Standard/item no. With guide profile/item no Tel: Fax: info@socosystem.com Web: 16

20 Width Length Standard/item no. With guide profile/item no All measurements are in mm. Subject to alteration. Belt with guide profile. Tel: Fax: info@socosystem.com Web: 17

21 Belt conveyors Belt conveyors with triplex angles Suitable for transport of items that are not suited for sudden transition from inclined to horizontal transport. Inclined and horizontal conveyors are manufactured and combined according to requirements. Available with roller, plate, or grooved plate bedding. Belts available are smooth belts, grip belts, and food belts. Ensure smooth transition between inclined and horizontal transport. Suitable for inclined transport of unstable items. Low noise level and smooth surfaces. The speed can be adjusted by means of various gearings or a frequency inverter. Specifications Tubes Drive unit Ø 48 mm impact proof plastic kw or 0.37 kw. Gear Standard 40:1 = 10 m/min. Other gearings available. A frequency control system can be connected direct to the 3- phase motor. Frames Width Length Subject to alteration. Electro-galvanised steel. 200, 300, 400, 500, 600 mm. According to requirements. Accessories Supports for belt conveyors and driven roller conveyors Tel: Fax: info@socosystem.com Web: 18

22 Belt conveyors Belt conveyors with booster For gentle transport - up or down. Inclined and horizontal conveyors are manufactured and combined according to requirements. Belt As standard, the booster is fitted with a smooth belt and the conveyor with a grip belt. 0.5 m long boosters wider than 400 mm are always delivered with belts with guide profile. Contact our sales department regarding food belts and other belt types. Bedding As standard, 0.5 m long and 400 mm wide boosters are supplied with grooved plate bedding. Conveyors and boosters of 1 m are supplied with roller bedding. Contact our sales department if another bedding is required. Note! A minimum of three supports is required for a conveyor with booster. As standard, the motor is fitted on the left side of the booster. For mounting on the other side, please specify this upon ordering. Ordering Choose a booster of the desired width and length (the booster is the horizontal conveyor). Then choose the length of the incline conveyor. The item number is stated under the booster. Then choose the belt. Ideal for wide transfer angles. Specifications Gear Standard 40:1 = 10 m/min. Other gearings available. A frequency control system can be connected direct to the 3- phase motor. Frames Width Length Subject to alteration. Electro-galvanised steel. 200, 300, 400, 500, 600 mm. The booster is available in lengths of 0.5 m and 1.0 m. The conveyor is available in lengths up to 10 m. For lengths over 5 m, please contact our sales department. Item numbers Width Conveyor length (L1) Booster 0.5 m (L2)/item no. Booster 1.0 m (L2)/item no Tel: Fax: info@socosystem.com Web: 19

23 Width Conveyor length (L1) Booster 0.5 m (L2)/item no. Booster 1.0 m (L2)/item no The prices are excluding belts. All measurements are in mm. Subject to alteration Accessories Supports for belt conveyors and driven roller conveyors Belt for belt conveyor with booster Tel: Fax: info@socosystem.com Web: 20

24 Belt conveyors Belt for belt conveyor with booster As standard, belt conveyors are supplied with a smooth belt for the booster and a grip belt for the conveyor. From a width of 400 mm, belts supplied for 0.5 m boosters are always supplied with guide profiles. For food belts and other belt types, please contact our sales department. Item numbers Width Conveyor length For conveyor For booster 0.5 m/item no. For booster 1.0 m/item no All measurements are in mm. Subject to alteration. Tel: Fax: info@socosystem.com Web: 21

25 T-55 Automatic adjustment for case size - Top and bottom closure The automatic height and width adjustment makes the T-55 ideal in packing lines where case sizes vary, e.g. in the dispatch department of warehouses. Two operators can work simultaniously on either side of the packing table. The T-55 can operate as a fully automatic top and bottom sealer provided the top flaps of the case are closed by means of a control label or a small piece of tape. Basic models T-55 and T-55 Maxi. Both models are available with high pillars for extra tall cases. Case sealers for random case sizes Easy tape and dispenser replacement. Easy to maintain with low maintenance and spare parts costs. Wide range of accessory equipment. Electro-galvanised or stainless steel finish. Specifications T T T-55 Maxi T-55 Maxi Case dimensions* Max. (LxWxH) mm x 510 x 510 x 510 x 810 x 720 x 510 x 720 x 810 Min. (LxWxH) mm 160 x 95 x x 95 x x 150 x x 150 x 220 Tape overlap 70 mm 50 mm Tape width mm mm mm Side drives Height 50 mm Height 80 mm Working height max./min mm mm mm mm mm Weight kg Capacity* Electric specifications Air consumption Tape diameter Standard Optional Max. 16 cases/ min. 3 x 230/400 V, Hz, or 3 x 415/460 V, Hz. Connected load 0.3 kw. Other specifications available upon request. Max. 8.5 l at 6 bar per case. Max. 385 mm. *Depending on the construction and quality of the case. Subject to alteration. Tel: Fax: info@socosystem.com Web: 22

26 Case sealers for random case sizes High quality tape dispensers. Pillar stop for maximum efficiency. The model T-55 is for packing stations that handle many different sizes of case. Tel: Fax: info@socosystem.com Web: 23

27 Case sealers for random case sizes T-602 Fully automatic - Top and bottom closure Automatic case size adjustment and flap closure. Together with SOCO SYSTEM controllers, complete feed-in control and maximum capacity is achieved. Basic models T-602 and T-602 Maxi. An extensive programme of accessories is available for both models, e.g. extra high pillars. Smallest external dimensions on the market The T-602 is a very compact machine with the smallest external dimensions in relation to its high capacity. Wide range of accessory equipment. Easy tape and dispenser replacement. Easy to maintain with low maintenance and spare parts costs. Electro-galvanised finish. Specifications T T Case dimensions* Max. (LxWxH) mm 600 x 460 x x 460 x 765 Min. (LxWxH) mm 200 x 120 x x 120 x 220 Tape overlap 70 mm 50 mm Tape width mm mm Side drives Height 50 mm Height 80 mm Working height max./min mm mm mm mm mm Weight kg Capacity* Electric specifications Air consumption Tape diameter Standard Optional Max. 8 cases/min. 3 x 230/400 V, Hz, or 3 x 415/460 V Hz. Connected load 0.3 kw. Other specifications available upon request max l at 6 bar per case, max l at 6 bar per case. Max. 385 mm. *Depending on the construction and quality of the case. Subject to alteration. Tel: Fax: info@socosystem.com Web: 24

28 B Belt conveyors with booster 19 Belt conveyors with plate bedding 9 Belt conveyors with roller bedding 6 Belt conveyors with triplex angles 18 Belt for belt conveyor with booster 21 C Coupled section for driven roller conveyors 3 Curves with conical rollers 90 5 D Drive section for driven roller conveyors 1 G Grip belts for belt conveyors 15 S Smooth belts for belt conveyors 12 T T-55 Automatic adjustment for case size - Top and bottom closure T-602 Fully automatic - Top and bottom closure Tel: Fax: info@socosystem.com Web: 25

29 Geberit AG, Switzerland Sig. Ágústsson, Iceland The SOCO SYSTEM From case erecting to pallet securing Laru, Germany The SOCO SYSTEM product range handles cases, plastic crates, trays, pallets, and many of your products. The SOCO SYSTEM product range is designed to increase efficiency and eliminate physically strenous work functions. One system one supplier There are many advantages of full product compatibility; less paperwork and no time wasted in adapting products from different suppliers. Meet your future requirements Add modules and functionality, relocate modules, or whatever fits your future needs. Toms, Denmark Rioja, Spain Call us, mail us, or visit us at Your local SOCO SYSTEM dealer: Beechwood, Nenagh, Co. Tipperary, Ireland Bouché Père & Fils, France COPYRIGHT SOCO SYSTEM 2006 United Milk, England Head office: SOCO SYSTEM A/S Helgeshoej Allé 16D DK-2630 Taastrup Denmark Tel Fax Altmark Käserei, Germany