DEPARTMENT OF THE ARMY TECHNICAL MANUAL

Transcription

1 TM P DEPARTMENT OF THE ARMY TECHNICAL MANUAL ORGANIZATIONAL, DIRECT SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST DETECTING SET, MINE: AURAL INDICATION; 10VDC OPERATING POWER: PORTABLE TRANSISTORIZED, W/ CASE AN/PSS-11 (POLAN MODELS P153 AND P158) FSN (POLAN MODEL P190) FSN (ORGEON TECHNICAL PRODUCTS MODEL MD-M) FSN (THE VP COMPANY MODEL VP200) FSN (FOURDEE MODEL 4D5000) FSN Headquarters, Department of the Army, Washington, D.C. 23 February 1974 Current as of 14 January 1974 SECTION I. INTRODUCTION II. REPAIR PARTS LIST Group 01 Carrying case 02 Battery adapter 03 Control box 04 Receiver and transmitter Cover and headset Chassis and components 05 Long handle 4 06 Search head 4 Page Illust fig *This manual supersedes TM P, 6 December 1968 including all changes. i

2 TM P Page Illust fig SECTION III. SPECIAL TOOLS LIST Group 07 Special tools SECTION IV. FEDERAL STOCK NUMBER AND PART NUMBER INDEX ii

3 CHANGE NO. 4 Changes in Force: 1,2,3, and 4. TM P C4 HEADQUARTERS DEPARTMENT OF THE ARMY WASHINGTON D.C., 15 AUGUST 1994 Organizational, Direct Support Maintenance Repair Parts and Special Tools List DETECTING SET, MINE: AURAL INDICATION; 10 VDC OPERATING POWER: PORTABLE TRANSISTORIZED, W/CASE AN/PSS-11 (POLAN MODELS P153 AND P158) FSN (POLAN MODEL P190) FSN (OREGON TECHNICAL PRODUCTS MODEL MD-M) FSN (THE VP COMPANY MODEL VP200) FSN (FOURDEE MODEL 4D5000) FSN DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited TM P, 23 February is changed as follows: Page v, Paragraph 7. Change U.S. Army Troop Support Command, ATTN:. AMSTS-MP, 4300 Goodfellow Boulevard. St. Louis, Missouri to U.S. Army Aviation and Troop Command, ATTN: AMSAT-I-MP, 4300 Goodfellow Boulvard. St. Louis, Missouri Page 1. Figure 1, Item 7. Change to read NSN P/N MS CAGEC 96906, Description Catch. clamping (Less strike). Page 1. Figure 1, Item 8. Change to read NSN , P/N MS , CAGEC 96906, Description Catch, strike. Page 1. Figure 1. Item 9. Change to read SMR Code PAOZZ, NSN P/N MS2047AD3-4, CAGEC Description Rivet, U/M LB. Page 5. Group 07- Special Tools. Change to read Group 08- Special Tools. Page 5. Add Group 07- Bulk, SMR Code PAOZZ, NSN P/N MIL-A-46106, CAGEC 81349, Description Sealant Adhesive. U/M KT. Page 14. Change NSN , Figure 1, Item 7 to NSN , Figure 1, Item 7. Change NSN , Figure 1, Item 8 to NSN , Figure 1. Item 8. Add NSN , Figure BULK. Page 15. Delete P/N C A91, CAGEC 98003, Figure 1, Item 7. Add P/N MS , CAGEC Figure 1. Item 7. Delete P/N S AP2, CAGEC 90883, Figure 1, Item 8. Add P/N MS , CAGEC Figure 1. Item 8. Add P/N MS2047AD3-4, CAGEC 96906, Figure 1, Item 9. Add P/N MIL-A-46106, CAGEC 81349, Figure BULK. 1

4 TM P C4 By Order of the Secretary of the Army: Official: GORDON R. SULLIVAN General United States Army Chief of Staff DISTRIBUTION: To be distributed in accordance with DA Form E, block 0620 requirements for TM P. 2

5 CHANGE NO. 3 Changes in Force: 1,2, and 3. TM P C3 HEADQUARTERS DEPARTMENT OF THE ARMY WASHINGTON, D. C., 3 JUNE 1992 Organizational, Direct Support Maintenance Repair Parts and Special Tools List DETECTING SET, MINE: AURAL INDICATION; 10 VDC OPERATING POWER: PORTABLE TRANSISTORIZED, W/CASE AN/PSS-11 (POLAN MODELS P153 AND P158) FSN (POLAN MODEL P190) FSN (OREGON TECHNICAL PRODUCTS MODEL MD-M) FSN (THE VP COMPANY MODEL VP200) FSN (FOURDEE MODEL 4D5000) FSN Approved for public release; Distribution is unlimited. TM P, 23 February 1974, is changed as follows: Page 1, Figure 1, Items 7 and 8. Information that was provided in Change 2, for these items is incorrect. Annotate your manual with the following: Item 7, NSN , P/N C A91, CAGEC 98003, Description Body Latch. Item 8, NSN , P/N S AP2, CAGEC 90883, Description Strike. Page 1, Figure 1, Add Item 10, P/N X100005A 1, CAGEC 19178, Description Valve, Screw. Add Item 11, NSN , P/N , CAGEC 83259, Description Washer, Sealing. Add Item 12, P/N A , CAGEC 25472, Description Rivnut. Page 1, Figure 2, Item 2, Change SMR Code XBOZZ to XAOZZ. Page 14, Add NSN , Figure 1, Item 7. Add NSN , Figure 1, Item 8. Add NSN , Figure 1, Item 9. Add NSN , Figure 1, Item 11. Page 15. Delete P/N C API, FSCM 98003, Figure 1, Item 7. Add P/N C A91, CAGEC 98003, Figure 1, Item 7. Delete P/N C AP2R, FSCM 98003, Figure 1, Item 8. Add P/N S AP2, CAGEC 90883, Figure 1, Item 8. Add P/N X100005A1, CAGEC 19178, Figure 1, Item 10. Add P/N , CAGEC 83259, Figure 1, Item 11. Add P/N A10-130, CAGEC 25472, Figure 1, Item 12. 1

6

7 Changes in force: C1, C2 TM P C 2 CHANGE HEADQUARTERS DEPARTMENT OF THE ARMY No. 2 WASHINGTON, D.C., 2 June 1987 Organizational, Direct Support Maintenance Repair Parts and Special Tools List DETECTING SET, MINE: AURAL INDICATION; 10 VDC OPERATING POWER: PORTABLE TRANSISTORIZED, W/CASE AN/PSS-11 (POLAN MODELS P153 AND P158) FSN (POLAN MODEL P190) FSN (OREGON TECHNICAL PRODUCTS MODEL MD-M) FSN (THE VP COMPANY MODEL VP200) FSN (FOURDEE MODEL 4D5000) FSN TM P, 23 February 1974, is changed as follows: Page 1, Figure 1. Add Item No. 7, SMR Code PAOZZ, part number C API, FSCM 98003, Description BODY, LATCH, U/M EA, and QTY INC IN UNIT 6. Page 1, Figure 1. Add Item No. 8, SMR Code PAOZZ, part number C AP2R, FSCM 98003, Description STRIKE, U/M EA, and QTY INC IN UNIT 6. Page 1, Figure 1. Add Item No. 9. Add SMR Code PAOZZ part number MS20470AD3-4, FSCM 96906, Description RIVET, UM EA, and QTY INC IN UNIT "8". Page 6, Figure 1. Add item numbers 8 and 9 and 7 and 9 to figure as shown in accompanying illustration. Page 15, INDEX-FEDERAL STOCK NUMBER AND REFERENCE NUMBER CROSS-REFERENCE TO FIGURE AND ITEM NUMBER. In line 2 position add Reference No. C API, MFG CODE 98003, Fig No. 1, and Item No. 7. Page 15, INDEX-FEDERAL STOCK NUMBER AND REFERENCE NUMBER CROSS-REFERENCE TO FIGURE AND ITEM NUMBER. In line 3 position add Reference No. C AP2R, MFG CODE 98003, Fig No. 1, and Item No. "8". Page 15, INDEX-FEDERAL STOCK NUMBER AND REFERENCE NUMBER CROSS-REFERENCE TO FIGURE AND ITEM NUMBER. In line 8 position add Reference No. MS20470AD3-4, MFG CODE 96906, Fig. No. 1, and Item No. 9. 1

8 TM P Figure 1. Carrying Case. By Order of the Secretary of the Army: Official: JOHN A. WICKHAM, JR. General, United States Army Chief of Staff R.L.DILWORTH Brigadier General, United States Army The Adjutant Geneml DISTRIBUTION: To be distributed in accordance with 12-25A, Unit and Direct Support Maintenance requirements for Detecting Set, Mine, Aural Indication, Portable, Transistorized, 10V, DC (P153, P158, P190, MD-M, VP200, 4D5000). 2

9 TM P C 1 CHANGE NO. 1 HEADQUARTERS DEPARTMENT OF THE ARMY WASHINGTON, D.C., 27 August 1986 ORGANIZATIONAL, DIRECT SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST DETECTING SET, MINE: AURAL INDICATION; 10VDC OPERATING POWER: PORTABLE TRANSISTORIZED, W/CASE AN/PSS-11 (POLAN MODELS P153 AND P158) FSN (POLAN MODEL P190) FSN (OREGON TECHNICAL PRODUCTS MODEL MD-M) FSN (THE VP COMPANY MODEL VP200) FSN (FOURDEE MODEL 4D5000) FSN TM P, 23 February 1974, is changed as follows: Page v, Paragraph 7. In line 6 AMSTS-MP is changed to read AMSTR-MCTS. Page 1, Figure 1, Item 1. NSN is changed to read Page 1, Figure 2, Item 4. NSN is changed to read 531O-OO-543-5O6O. Page 1, Figure 2, Item 14. Add NSN Page 1, Figure 3, Item 6. NSN is changed to read and part number is changed to read M5423/09-O1. Page 1, Figure 3, Item 10. NSN is changed to read and part number is changed to read MS , FSCM Page 2, Figure 3, Item 14. NSN is changed to read 531O-OO-543-5O6O. Page 2, Figure 3, Item 17. Add NSN Part number is changed to read 13200E5333. Page 2, Figure 3, Item 18. Add part number MS20470A2-4 and add FSCM Page 2, Figure 3, Item 27. NSN is changed to read and part number is changed to read 13208E4628. Page 2, Figure 3, Item 28. NSN is changed to read Page 2, Figure 3, Item 30. NSN is changed to read and part number is changed to read MS Page 2, Figure 3, Item 37. NSN is changed to read and part number is changed to read MS O. Page 2, Figure 3, Item 38. Description is changed to read Cable Assy. Page 2, Figure 3, Item 44. Add NSN

10 TM P Page 2, Figure 3, Item 45. Add part number MS and FSCM Page 2, Figure 4, Line 1. Add NSN Page 2, Figure 4, Item 1. Add NSN Page 3, Figure 4, Item 10. NSN is changed to read and part number is changed to read MS Page 3, Figure 4, Item 12. NSN is changed to read Page 3, Figure 4, Item 18. NSN is changed to read Page 3, Figure 4, Item 26. Part number is changed to read 13216E9300. Page 3, Figure 4, Item 28. NSN is changed to read 531O-OO Add part number MS Page 3, Figure 4, Item 30. Add part number MS and FSCM Page 3, Figure 5, Item 9. Description is changed to read Connector Receptacle Oscillator. Page 3, Figure 5, Item 17. Add part number MS20426A2-2 and FSCM Page 3, Figure 5, Item 19. Add NSN Page 3, Figure 5, Item 20. Add NSN FSCM is changed to read Page 3, Figure 5, Item 21. NSN is changed to read Page 4, Figure 5, Item 23. Add part number MS and FSCM Page 4, Figure 6, Item 1. Description is changed to read Boom, Mine Detector. Page 4, Figure 6. The following items are added. (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION QTY (a) (b) FEDERAL U/M INC FIG ITEM SMR STOCK PART IN NO. NO. CODE NUMBER NUMBER FSCM DESCRIPTION UNIT 6 6 PAFZZ 13211E SPRING EA PAFZZ 13211E WASHER EA PAFZZ 13211E WASHER EA 1 Page 4, Figure 7, Item 2. Add NSN Page 4, Figure 7, Item 3. Add NSN

11 TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION QTY (a) (b) FEDERAL INC FIG ITEM SMR STOCK PART IN NO. NO. CODE NUMBER NUMBER FSCM DESCRIPTION U/M UNIT 7 7 PAFZZ E HANDLE ASSY, SHORT EA 1 Page 4, Figure 7, Item 8. NSN is changed to read Page 4, Figure 7, Item 9. NSN is changed to read and part number is changed to read MS O. Page 4, Figure 7, Item 12. NSN is changed to read 531O-OO-996-O577. Page 5, Figure 8, Item 1. NSN is changed to read and Part number is changed to read 13220E5627, FSCM By Order of the Secretary of the Army: Official: JOHNA.WICKHAM, JR. General, United States Army Chief of Staff R.L.DILWORTH Brigadier General, United States Army The Adjutant General DISTRIBUTION: To be distributed in accordance with DA Form 12-25A, Organizational, Direct Support and General Support Maintenance requirements for Detecting Set, Mine, Aural Indication, Portable, Transistorized, 10V, DC (P153, P158, P190, MD-M, VP200, 4D5000). 3/(4 blank)

12 TM P SECTION I INTRODUCTION 1. Scope This manual lists repair parts, special tools, test, measurement, and diagnostic equipment (TMDE), and other support equipment required for operation and performance of organizational, and direct support maintenance of the mine detecting set. 2. General a. Section II Repair Parts List. A list of repair parts authorized for use in the performance of maintenance. The list also includes parts which must be removed for replacement of the authorized parts. Parts lists are composed of functional groups in ascending numerical sequence, with the parts in each group listed in figure and item number sequence. Bulk materials are listed in FSN sequence, as the last group in Section II. b. Section III Special Tools List. A list of special tools, TM DE, and support equipment authorized for the performance of maintenance, at the direct support level. c. Section IV Federal Stock Number and Part Number Index. A list, in ascending numerical sequence, of all Federal stock numbers appearing in the listings, followed by a list, in alpha numeric sequence. of all parts numbers appearing in the listings. Federal stock number and part numbers are cross-referenced to each illustration figure and item number appearance. 3. Explanation of Columns The following provides an explanation of columns found in the tabular listings: a. Illustration. This column is divided as follows: (1) Figure number. Indicates the figure number of the illustration in which the item is shown. (2) Item number. The number used to identify each item called out in the illustration. b. Source, Maintenance, and Recoverability Codes (SMR). (1) Source code. Source codes are assigned to support items to indicate the manner of acquiring support items for maintenance, repair, or overhaul of end items. Source Codes are entered in the first and second positions of the Uniform SMR code format as follows: Code PA P B PC P D PE PF PG KD KF KB MO MF MH MD AO AF AH AD XA XB XD Definition Item procured and stocked for anticipated or known usage. Item procured and stocked for insurance purpose because essentiality dictates that a minimum quantity be available in the supply systems. Item procured and stocked and which otherwise would be coded PA except that it is deteriorative in nature. Support item, excluding support equipment, procured for initial issue or outfitting and stocked only for subsequent or additional initial issues or outfittings. Not subject to automatic replenishment. Support equipment procured and stocked for initial issue or outfitting to specified maintenance repair activities. Support equipment which will not be stocked but which will be centrally procured on demand. Item procured and stocked to provide for sustained support for the life of the equipment. It is applied to an item peculiar to the equipment which, because of probable discontinuance or shutdown of production facilities, would prove uneconomical to reproduce at a later time. An item of a depot overhaul/ repair kit and not purchased separately. Depot kit defined as a kit that provides items required at the time of overhaul or repair. An item of a maintenance kit and not purchased separately. Maintenance kit defined as a kit that provides an item that can be replaced at organizational or intermediate levels of maintenance. Item included in both a depot overhaul/ repair kit and a maintenance kit. Item to be manufactured or fabricated at organizational level. Item to be manufactured or fabricated at the direct support maintenance level. Item to be manufactured or fabricated at the general support maintenance level. Item to be manufactured or fabricated at the depot maintenance level. Item to be assembled at organizational level. Item to be assembled at direct support maintenance level. Item to be assembled at general support maintenance level. Item to be assembled at depot maintenance level. Item is not procured or stocked because the requirements for the item will result in the replacement of the next higher assembly. Item is not procured or stocked. If not available through salvage. requisition. A support item that is not stocked. When required, item will be procured through normal supply channels. iii

13 TM P NOTE Cannibalization or salvage maybe used as a source of supply for any items source coded above except those coded XA or XD. (2) Maintenance code. Maintenance codes are assigned to indicate the levels of maintenance authorized to use and repair support items. The maintenance codes are entered in the third and fourth positions of the Uniform SMR Code format as follows: (a) The maintenance code entered in the third position will indicate the lowest maintenance level authorized to remove, replace, and use the support item. The maintenance code entered in the third position will indicate one of the following levels of maintenance: Code C O I F H D Application/ Explanation Crew or operator maintenance performed within organizational maintenance. Support item is removed, replaced, used at the organizational level. Support item is removed, replaced, used by the direct support element of integrated direct support maintenance. Support item is removed, replaced, used at the direct support level. Support item is removed, replaced, used at the general support level. Support items that are removed. replaced, used at depot, mobile depot. specialized repair activity only. NOTE Codes I" and F will be considered the same by direct support units. (b) The maintenance code entered in the fourth position indicates whether the item is to be repaired and identifies the lowest maintenance level with the capability to perform complete repair (i.e., all authorized maintenance functions). This position will contain one of the following maintenance codes: Code O F H D L Z B Application/ Explanation The lowest maintenance level capable of complete repair of the support item is the organizational level. The lowest maintenance level capable of complete repair of the support item is the direct support level. The lowest maintenance level capable of complete repair of the support item is the general support level. The lowest maintenance level capable of complete repair of the support item is the depot level. Repair restricted to designated specialized repair activity. Nonreparable. No repair is authorized. No repair is authorized. The item may be reconditioned by adjusting, lubricating, etc., at the user level. No parts or special tools are procured for the maintenance of this item. (3) Recoverability code. Recoverability codes are assigned to support items to indicate the disposition action on unserviceable items. The recoverability code is entered in the fifth position of the Uniform SMR Code format as follows: Recoverability Codes Definition Z Nonreparable item. When unserviceable, condemn and dispose at the level indicated in position 3. O Reparable item. When uneconomically reparable, condemn and dispose at organizational level. F Reparable item. When uneconomically reparable, condemn and dispose at the direct support level. H Reparable item. When uneconomically reparable, condemn and dispose at the general support level. D Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal not authorized below depot level. L Reparable item. Repair, condemnation, and disposal not authorized below depot/ specialized repair activity level. A Item requires special handling or condemnation procedures because of specific reasons (i.e., precious metal content, high dollar value, critical material or hazardous material). Refer to appropriate manuals/ directives for specific instructions. c. Federal Stock Number. Indicates the Federal stock number assigned to the item and will be used for requisitioning purposes. d. Part Number. Indicates the primary number used by the manufacturer which controls the design and characteristics of the item by means of its engineering drawings, specifications standards, and inspection requirement to to identify an item or range of items. NOTE When a stock numbered item is requisitioned, the repair part received may have a different part number than the part being replaced. e. Federal Supply Code for Manufacturer (FSCM). The FSCM is a 5-digit numeric code listed in SB which is used to identify the manufacturer, distributor, or Government agency, etc. f. Description. Indicates the Federal item name and, if required, a minimum description to identify the item. Items that are included in kits and sets are listed below the name of the kit or set with the quantity of each item in the kit or set indicated in the quantity incorporated in unit column. When the part to be used differs between serial numbers of the same model, the effective serial numbers are shown as the last line of the description. In the Special Tools List, the initial basis of issue (BOI) appears as the last line in the entry for each special iv

14 TM P too. TM DE. and support equipment. When density of equipment supported exceeds density spread indicated in the basis of issue, the total authorization is increased accordingly. g. Unit of Measure (U/M). Indicates the standard of the basic quantity of the listed item as used in performing the actual maintenance function. This measure is expressed by a two-character alphabetical abbreviation (e.g., ea. in, pr, etc.). When the unit of measure differs from the unit of issue, the lowest unit of issue that will satisfy the required units of measure will be requisitioned. h. Quantity Incorporated in Unit. Indicates the quantity of the item used in the breakout shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an assembly. A V appearing in this column in lieu of a quantity indicates that no specific quantity is applicable, (e.g., shims, spacers, etc.). 4. Special Information a. Detailed manufacturing instructions for items source coded be manufactured or fabricated are found in TM Bulk materials required to manufacture items are listed in the Bulk Material Group of this manual. b. Detailed assembly instructions for items source coded to be assembled are found in TM Assembly components are listed immediately following the item to be assembled. c. Repair parts kits and gasket sets appear as the last entries in the repair parts listing for the figure in which its parts are listed as repair parts or are listed at the end of the repair parts listing for the last figure containing parts of the kit. d. The following publication pertains to the mine detecting set and its components: TM Operator, Organizational and Direct Support Maintenance Manual 5. How to Locate Repair Parts a. When Federal Stock Number or Part Number is Unknown: (1) First. Using the table of contents, determine the functional group within which the repair part belongs. This is necessary since illustrations are prepared for functional groups, and listings are divided into the same groups. (2) Second. Find the illustration covering the functional group to which the repair part belongs. (3) Third. Identify the repair part on the illustration and note the illustration figure and item number of the repair part. (4) Fourth. Using the Repair Parts Listing, find the figure and item number noted on the illustration. b. When Federal Stock Number or Part Number is Known. (1) First. Using the Index of Federal Stock Numbers and Part Numbers, find the pertinent Federal stock number or part number. This index is in ascending FSN sequence followed by a list of part numbers in ascending alphanumeric sequence, cross-referenced to the illustration figure number and item number. (2) Second. After finding the figure and item number, locate the figure and item number in the repair parts list. 6. Abbreviations lg long length mall model mug mounting w/ with 7. Recommendations for Maintenance Publications Improvements You can improve this manual by calling attention to errors and by recommending improvements, using DA Form 2028 (Recommended Changes to Publications) of by a letter, and mail directly to Commander, U.S. Army Troop Support Command, ATTN: AMSTS-MP, 4300 Goodfellow Boulevard, St. Louis, Missouri A reply will be furnished directly to you. v

15 TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION QTY (A) (B) SMR FEDERAL PART INC FIG. ITEM CODE STOCK NUMBER FSCM DESCRIPTION U/M IN NO NO USABLE ON CODE UNIT SECTION II - REPAIR PARTS LIST GROUP 01 - CARRYING CASES 1 1 PAOZZ E CASE ASSEMBLY EA PAOZZ E INSERT, BOTTOM EA PAOZZ E INSERT, CASE: TOP EA XBOZZ 13211E PLATE, IDENTIFICATION: CASE INSERT, TOP EA 1 (U/O POLAN MDL P158 AND THE VP COMPANY MDL VP200, ONLY) 1 5 XBOZZ 13211E PLATE, IDENTIFICATION: CARRYING CASE, TOP EA 1 (U/O POLAN MDL P158 AND THE VP COMPANY MDL VP200, ONLY) 1 6 XBOZZ 13211E PLATE, IDENTIFICATION: CSE INSERT, BOTTOM EA 1 1 XBOZZ 13211E PLATE, IDENTIFICATION: CARRYING CASE EA 1 (U/O POLAN MDL P158 AND THE VP COMPANY MDL VP200, ONLY) GROUP 02 - BATTERY ADAPTER 2 PAOZZ E ADAPTER: BATTERY CASE ASSEMBLY EA PAFZZ E CABLE ASSEMBLY: ADAPTER TO BATTERY CASE EA XBOZZ 13207E CASE, BATTERY EA XBFZZ MS SCREW, MACHINE: LEAD MTG, ADAPTER EA XBFZZ MS WASHER, LOCK: LEAD MTG, ADAPTER EA XBFZZ E CONTACT, ADAPTER: BOTTOM EA XBFZZ 13207E BUSHING: BATTERY CASE ADAPTER EA XBFZZ E SPRING, HELICAL, COMPRESSION: BATTERY CASE, BOTTOM EA PAOZZ MS PACKING, PREFORMED: BATTERY CASE AND ADAPTER EA XBFZZ 13215E WASHER, FLAT: BATTERY ADAPTER AND CASE BUSHING PACKING EA XBFZZ E PACKING, PREFORMED: BATTERY ADAPTER AND CASE BUSHING EA XBFZZ E BUSHING: BATTERY ADAPTER AND CASE EA XBFZZ E SPRING, HELICAL, COMPRESSION: BATTERY CABLE TO BUSHINGS EA XBOZZ 13207E ADAPTER, BATTERY CASE EA XBFZZ 13207E SPRING, HELICAL, COMPRESSION: ADAPTER, INSIDE EA XBFZZ 13207E BUSING, CONTACT: ADAPTER, BOTTOM EA XAOZZ 13207E ADAPTER: BATTERY TUBE RECEIVER-TRANSMITTER EA 1 GROUP 03 - CONTROL BOX 3 PAFZZ E CONTROL BOX ASSEMBLY EA PAFZZ MS SCREW, MACHINE: CONTROL BOX COVER EA XBFZZ E COVER, CONTROL BOX EA PAFZZ E GASKET: CONTROL BOX COVER EA PAFZZ RC20GF820J RESISTOR: CONTROL BOX, R3 AND R4 EA PAFZZ E RESISTOR, VARIABLE: CONTROL ASSEMBLY, R502 EA PAFZZ MILB5423-9TYPECSIZ BOOT, DUST AND MOISTURE SEAL: S1 AND R2 RESISTOR EA XBFZZ MS INSERT, SCREW THREAD: CONTROL BOX AND KNOB COVER MTG EA XBFZZ E COVER, KNOB: R502 RESISTOR, RECIVER EA PAFZZ MS SCREW, MACHINE: KNOB COVER MTG EA PAFZZ SETSCREW: KNOB MTG EA PAFZZ E KNOB: R1 AND R2 RESISTORS EA XBFZZ 13200E CHASSIS, CONTROL EA 1 1

16 TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION QTY (A) (B) SMR FEDERAL PART INC FIG. ITEM CODE STOCK NUMBER FSCM DESCRIPTION U/M IN NO NO USABLE ON CODE UNIT 3 13 PAFZZ MS NUT, PLAIN, HEXAGON: R6, RESISTOR MTG EA PAFZZ MS WASHER, LOCK: R506, RESISTOR MTG EA XBFZZ E BOARD ASSEMBLY, TERMINAL: CONTROL ASSEMBLY EA XAFZZ 13200E TERMINAL EA XBFZZ 13200E BOARD, TERMINAL EA PAFZZ RIVET, SOLID: BRACKET TO TERMINAL BOARD EA XBFZZ 13200E BRACKET: TERMINAL BOARD MTG EA XBFZZ RN60C3011F RESISTOR: TERMIANL BOARD, R508 EA PAFZZ E RESISTOR, VARIABLE: TERMINAL BOARD, R506 EA XBFZZ RN60C4321F RESISTOR: TERMINAL BOARD, R507 EA PAFZZ MS SCREW, MACHINE: R506, RESISTOR MTG EA XBFZZ E RESISTOR, FIXED, WIRE WOUND: TERMINAL BOARD, R509 EA PAFZZ PIN, STRAIGHT, HEALESS: CONTROL BOX LOCATING EA PAFZZ E SWITCH: CONTROL ASSEMBLY, S1 EA PAFZZ E KNOB: S501 RESISTOR EA PAFZZ E RESISTOR, VARIABLE: CONTROL ASSEMBLY, R501 EA XBFZZ E COVER, KNOB: R501 RESISTOR, TRANSMITTER EA PAFZZ MS PACKING, PREFORMED: BUSHING, CONTROL BOX POWER CABLE EA XBFZZ E WASHER, FLAT: BUSHING, CONTROL BOX POWER CABLE EA XBFZZ E BUSHING: CONTROL BOX POWER CABLE EA XBFZZ E SPRING, HELICAL, COMPRESSION: POWER CABLE BUSHING EA XBFZZ E SPRING, HELICAL, COMPRESSION: RECEIVER-TRANSMITTER CABLE EA XBFZZ E BUSHING: CONTROL BOX, RECIEVER-TRANSMITTER CABLE EA XBFZZ E WASHER, FLAT: BUSHING, RECEIVER-TRANSMITTER CABLE EA PAFZZ MS PACKING, PREFORMED: BUSHING, RECEIVER-TRANSMITTER CABLE EA PAFZZ E WIRING HARNES, BRANCHED: RECIVER-TRANSMITTER EA XBFZZ E CLAMP, RELIEF STRAIN: CABLE EA PAFZZ E CABLE, WIRING HARNESS ASSEMBLY EA PAFZZ MS SCREW, MACHINE: TERMINAL MTG EA PAFZZ RC20GF202J RESISTOR, FIXED, COMPOSITION: MOUNTED ON S1 SWITCH EA XBFZZ MS TERMINAL, LUG: CONTROL BOX, GROUNDING EA XBFZZ MS INSERT: CONTROL BOX CLAMP MTG EA PAFZZ WASHER, LOCK: TERMINAL BOARD TO CONTROL BOX MTG EA 2 GROUP 04 - RECEIVER AND TRANSMITTER 4 XBOZZ 13200E RECEIVER AND TRANSMITTER ASSEMBLY: AUDIO FREQUENCY EA XBOZZ 13200E COVER ASSEMBLY: RECIVER-TRANSMITTER EA PAOZZ E BAG ASSEMBLY: RECIVER-TRANSMITTER EA PAOZZ E GASKET: HEADER EA PAFZZ E HEADER, CHASSIS EA PAFZZ MS PACKING, PREFORMED: HEADSET LEAD BUSHING TO HEADER EA XBFZZ E WASHER, FLAT: HEADSET LEAD PACKING EA XBFZZ E BUSHING: HEASET LEAD TO HEADER EA XBFZZ E SPRING, HELICAL, COMPRESSION: HEADSET LEAD TO HEADER EA XBOZZ E PLATE, INDENTIFICATION: RECEIVER-TRANSMITTER HEADER EA 1 (U/O POLAN MDL P158, ONLY) 2

17 TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION QTY (A) (B) SMR FEDERAL PART INC FIG. ITEM CODE STOCK NUMBER FSCM DESCRIPTION U/M IN NO NO USABLE ON CODE UNIT 4 9 XBOZZ VP9B3730A PLATE, IDENTIFICATION: RECEIVER-TRANSMITTER HEADER EA 1 (U/O THE VP COMPANY MDL VP 200, ONLY) 4 10 PAFZZ MS PACKING, PREFORMED: POWER CABLE, RECEIVRE-TRANSMITTER HEADER EA XBFZZ E WASHER, FLAT: POWER CABLE PACKING HEADER EA XBFZZ E BUSHING: HEADER, POWER CABLE EA XBFZZ E SPRING, HELICAL, COMPRESS: POWER CABLE BUSHING EA PAOZZ E PLUG ASSEMBLY, BATTERY TUBE: HEADER EA PAOZZ MS SCREW, DRIVE: CHAIN TO PLUG MTG EA PAOZZ RRC271TYPE2CLASS5T CHAIN ASSEMBLY: PLUG MTG EA XBOZZ COUPLING, CHAIN: TO HEADER AND PLUG EA XBOZZ E PLUG, BATTERY TUBE EA PAOZZ MS PACKING, PREFORMED: BATTERY TUBE PLUG EA XAOZZ 13200E SPRING, HELICAL: CONTACT PLUG TO BATTERY EA PAOZZ SCBA1389U BATTERY, MERCURY: RECIVER-TRANSMITTER EA XBOZZ E STRIKE, CATCH: COVER TO HEADER LATCHING EA PAOZZ MS SCREW, MACHINE: STRIKE TO HEADER MTG EA PAFZZ E HEADSET ASSEMBLY, ELECTRICAL EA PAFZZ E CABLE ASSEMBLY EA XBFZZ 13200E WASHER, D: CABLE CLAMP MTG EA XBFZZ 13200E CLAMP, CABLE: POWER CABLE TO HEADER EA PAFZZ WASHER, LOCK: POWER CABLE TO CLAMP EA PAFZZ MS SCREW, MACHINE: POWER CABLE CLAMP EA PAFZZ NUT, PLAIN, HEXAGON: CHASSIS TO HEADER MTG EA PAFZZ MS SCREW, MACHINE: CHASSIS TO HEADER MTG EA 4 5 XBFZZ 13200E CHASSIS ASSEMBLY: RECEIVER AND TRANSMITTER EA PAOZZ E OSCILLATOR: RED EA PAOZZ E VARIOMETER: BLACK EA PAOZZ E AMPLIFIER, INPUT ERROR: WHITE EA PAOZZ E APLIFIER, OUTPUT: YELLOW, W/BLACK STRIPE EA PAFZZ MS SCREW, MACHINE: MODULE CONNECTOR MTG EA PAFZZ E CONNECTOR STRIP ASSEMBLY: RECEIVER AND TRANSMITTER EA XBFZZ E CONNECTOR, RECEPTACLE: VARIOMETER EA XBFZZ E CONNECTOR, RECEPTACLE: OUTPUT AMPLIFIER MODULE EA XBFZZ E TERMINAL BOARD: OSCILLATOR EA XBFZZ E CONNECTOR, RECEPTACLE: INPUT ERROR AMPLIFIER EA XAFZZ 13200E TERMINAL EA XBFZZ 13200E BOARD, PRINTED EA XBFZZ E SPRING, LEAF: YELLOW, OUTPUT AMPLIFIER MODULE HOLDING EA XBFZZ E SPRING, LEAF: WHITE, INPUT ERROR AMPLIFIER MODULE HOLDING EA XBFZZ E SPRING, LEAF: BLACK, VARIOMETER MODULE HOLDING EA XBFZZ E SPRING, LEAF: RED, OSCILLATOR MODULE HOLDING EA PAFZZ RIVET, SOLID: MODULE SPRING MTG EA XBFZZ E NUT, ROUND: MODULE CONNECTOR LUG, CAPACITOR AND LEAD MTG EA XBFZZ 13200E TUBE, BATTERY EA XBFZZ 13200E BATTERY SUPPORT ASSEMBLY: BATTERY TUBE EA XBFZZ MS RIVET, TUBULAR: BATTERY TUBE SUPPORT MTG EA 2 3

18 TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION QTY (A) (B) SMR FEDERAL PART INC FIG. ITEM CODE STOCK NUMBER FSCM DESCRIPTION U/M IN NO NO USABLE ON CODE UNIT 5 22 PAFZZ MS SCREW, MACHINE: CAPACITOR CLAMP MTG EA PAFZZ WASHER, FLAT: CAPACITOR CLAMP MTG EA XBFZZ E CLAMP, CAPACITOR EA PAFZZ E CAPACITOR: RECEIVER AND TRANSMITTER EA PAFZZ MS GROMMET, RUBBER: CHASSIS EA XBFZZ MS TERMINAL, LUG: LEAD TO CHASSIS AND TERMINAL BOARD EA XBFZZ E NUT, ROUND: LEAD TO TERMINAL BOARD MTG EA PAFZZ MS WASHER, LOCK: CAPACITOR CLAMP MTG EA PAFZZ E CHASSIS ASSMBLY: RECEIVER AND TRANSMITTER EA 1 GROUP 05 - LONG HANDLE 6 1 PAFZZ E HANDLE ASSMEBLY: LONG EA PAFZZ MS SCREW, MACHINE: CLAMP MTG, PANHEAD, NO THD SIZE,.31 IN. LG EA XBFZZ E CLAMP: CONTROL BOX MTG EA XAFZZ E NUT, JAM, HEXAGON: COUPLING LOCK EA XBFZZ PL13213E COUPLING ASSEMBLY: LONG HANDLE EA XAFZZ E COUPLING, FEMALE EA 1 (TO INSTALL ABOVE REPLACEMENT COUPLING ASSEMBLY, ON OREGON PRODUCTS MODEL MD-M, REQUISITION 1 EACH, HANDLE ASSEMBLY, FSN ) GROUP 06 - SEARCH HEAD 7 1 PAOZZ E COVER, DETECTING HEAD EA 1 7 PAFZZ E DETECTOR HEAD AND BALANCE COIL ASSEMBLY EA XBFZZ 13200E DECTECTOR HEAD ASSEMBLY, MOLDED EA XAFZZ A13200E BALANCE COIL: DECTECTOR HEAD EA PAFZZ MS PACKING, PREFORMED: CAP TO HEAD EA PAFZZ E BOLT, MACHINE: HANDLE TO CAP EA PAFZZ E WASHER, PHENOLIC: HANDLE TO CAP MTG EA PAFZZ E HANDLE ASSEMBLY, SHORT EA 1 (TO INSTALL ABOVE REPLACEMENT HANDLE ASSEMBLY ON OREGON PRODUCTS MDL MD-M, REQUISISTION 1 EACH, COUPLING ASSEMBLY, FSN ) 7 8 XBFZZ E BUSHING, MACHINE THREAD: CABLE TO CAP EA PAFZZ MS PACKING, PREFORMED: CABLE BUSHING EA PAFZZ E CAP ASSEMBLY: DECTECTOR HEAD TO HANDLE EA PAFZZ E ADAPTER, SLEEVE BEARING: HANDLE AND CAP EA PAFZZ E NUT, HEXAGON, PLASTIC: HANDLE TO CAP MTG EA PAFZZ MS SCREW, MACHINE: DETECTOR TO CAP MTG EA 6 4

19 TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION QTY (A) (B) SMR FEDERAL PART INC FIG. ITEM CODE STOCK NUMBER FSCM DESCRIPTION U/M IN NO NO USABLE ON CODE UNIT SECTION III - SPECIAL TOOLS LIST GROUP 07 - SPECIAL TOOLS 8 1 PAFZZ PHASING FIXTURE EA XBOZZ E PHASING BLOCK ASSEMBLY EA PAFZZ E TEST PIN EA 1 5

20 6 Figure 1. Carrying Case

21 ME P/2 Figure 2. Battery Adapter 7

22 ME P/3 8 Figure 3. Control Box

23 Figure 4. Cover and Headset 9

24 ME P/5 10 Figure 5. Chassis and Components

25 ME P/6 Figure 6. Long Handle 11

26 ME P/7 12 Figure 7. Search Head

27 ME P/8 Figure 8. Special Tools 13

28 SECTION IV. INDEX-FEDERAL STOCK NUMBER AND REFERENCE NUMBER CROSS-REFERENCE TO FIGURE AND ITEM NUMBER ITEM FIG ITEM STOCK NUMBENO STOCK NUMBER NO NO

29 SECTION IV. INDEX-FEDERAL STOCK NUMBER AND REFERENCE NUMBER CROSS-REFERENCE TO FIGURE AND ITEM NUMBER REFERENCE MFG FIG ITEM REFERENCE MFG FIG ITEM NO CODE NO NO NO CODE NO NO A13200E E MILB5423-9TYPECSIZ E MS E MS E MS E MS E MS E E E MS E E MS E MS E E MS E E MS E MS E MS E MS E MS E E MS E MS E E MS E MS E E E MS E MS E MS E MS E MS E PL13213E E RC20GF202J E RC20GF820J E RN60C3011F E RN60C4321F RRC271TYPE2CLASS5T E SCBA1389U E VP9B3730A E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E

30 TM P By Order of the Secretary of the Army: Official: VERNE L. BOWERS Major General, United States Army The Adjutant General CREIGHTON W. ABRAMS Genera!, United States Army Chief of Staff Distribution: To redistributed in accordance with DA Form 12-25A (qty rqr block no. 134), organizational maintenance requirements for Land Mine Detection.

31

32

33 PIN:

34 This fine document... Was brought to you by me: Liberated Manuals -- free army and government manuals Why do I do it? I am tired of sleazy CD-ROM sellers, who take publicly available information, slap watermarks and other junk on it, and sell it. Those masters of search engine manipulation make sure that their sites that sell free information, come up first in search engines. They did not create it... They did not even scan it... Why should they get your money? Why are not letting you give those free manuals to your friends? I am setting this document FREE. This document was made by the US Government and is NOT protected by Copyright. Feel free to share, republish, sell and so on. I am not asking you for donations, fees or handouts. If you can, please provide a link to liberatedmanuals.com, so that free manuals come up first in search engines: <A HREF= Military and Government Manuals</A> Sincerely Igor Chudov Chicago Machinery Movers