Flexibility in Design. Proven Performance

Transcription

1 Product Catalogue

2 Since 2007 TS Global has specialised in the manufacture of a comprehensive range of high quality conveyor accessories and polyurethane components. Our engineering and manufacturing expertise delivers world-class conveyor solutions that are built to withstand the harshest conditions. PARTNERING WITH TS GLOBAL PROVIDES YOU: Proven Performance Our focus is on the design, manufacture and supply of quality, high performing, low maintenance products. Our durable products are designed to operate in the toughest conditions. This provides our clients with improved plant availability and reduced total cost of operation. Flexibility in Design As a manufacturer we are able to provide customised solutions in response to our clients site specific needs. Our extensive workshop is able to provide support 24 hours a day, 7 days a week to meet your operational requirements and minimise downtime. Quality Products We offer competitive rates while maintaining a high standard of quality products. This is achieved by utilising a selection of quality materials that provide product longevity and exceptional performance. On Time Delivery Our extensive stock holding and flexibility in manufacture provides exceptional service in order to meet critical deadlines and minimise downtime for our clients.

3 Performance Guarantee TS Global offers a 100% Performance Guarantee for our conveyor products. TS Global will either remedy the performance of the product or fully refund the price of the product. TERMS TS Global guarantees the performance of our products in accordance with the following terms: The product must be installed and operated in accordance with the specifications provided by TS Global for the Guarantee to apply Should the product not perform to the standards agreed by TS Global and the customer, the customer must notify TS Global by within 60 calendar days from the date invoiced Upon notification, TS Global reserves the right to verify, assess, evaluate and rectify the situation If TS Global cannot rectify the product to meet the agreed performance standards we will fully refund the price of the product. In the case of a refund, the customer will return the product to TS Global In the event that the customer has: Provided TS Global with inaccurate information regarding product parameters at the time the product was being designed The customer has altered or changed the application since the original design The customer has not installed, operated or maintained the product in accordance with the specification provided by TS Global Should any of the above occur, TS Global will work with our client for an acceptable outcome however the Performance Guarantee may become invalid. PAGE 3

4

5 CONTENTS Belt Cleaners...6 Primary Belt Cleaners...7 Secondary Belt Cleaners...8 Accessories...10 Conveyor Ploughs...12 Vee Ploughs...13 Diagonal Ploughs...14 Belt Trackers...15 Skirt Systems...18 Conveyor Belt Repair...20 Pulley Lagging...22 General Accessories...24 Warranty Statement...26 We manufacture premium quality, innovative conveyor products and market leading solutions.

6 Belt Cleaners In mining operations, materials handling constitutes a major component of production costs. Conveyors play a central role in the operations processing, storage and transportation of materials. It is essential that they operate efficiently with maximum availability and with a minimum of down-time. To minimise carry-back under a conveyor, where room is available, our approach is to install a belt cleaning system which incorporates a primary, secondary (with water where available) and tertiary belt cleaners. These will be supported by a set of stabilising rollers that ensures that the belt cleaners operate on a flat and stable surface.

7 H Tungsten Belt Cleaner Primary Belt Cleaners H Polyurethane Belt Cleaner Single or bi-directional conveyors Pulley diameter up to 1700mm (67 ) Belt speed up to 8.0m/s (1575ft/min) Vulcanised belts only High cleaning performance Long lasting tungsten Available with retractable cartridge EP Cleaner Single or bi-directional conveyors Worn or damaged covers Pulley diameter up to 1200mm (47 ) Belt speed up to 5.5m/s (1100ft/min) Vulcanised or clipped conveyor belts Available with retractable cartridge Low cost Worn or damaged covers Single or bi-directional conveyors A continuous blade Pulley diameter mm (10-35 ) Belt speed up to 4.0m/s (787ft/min) Vulcanised or clipped conveyor belts Easy to maintain XHD Polyurethane Belt Cleaner Single or bi-directional conveyors Worn or damaged covers Pulley diameter up to 1200mm (47 ) Belt speed up to 5.5m/s (1100ft/min) Vulcanised or clipped conveyor belts Easy to maintain PAGE 7

8 P Type Cleaner Secondary Belt Cleaners Single directional conveyors Belt speed up to 7.0m/s (1400ft/min) - tungsten; 5.5m/s (1100ft/min) - tool steel or polyurethane Vulcanised (tungsten) or clipped (tool steel) conveyor belts Available with retractable cartridge Spray Pole P Cleaner R Type Cleaner Single directional conveyors Belt speed up to 7.0m/s (1400ft/min) - tungsten Vulcanised (tungsten) or clipped (tool steel) conveyor belts High cleaning performance Available with retractable cartridge Spray Pole R Cleaner Shuttles, trippers, single, reversing or bi-directional conveyors Belt speed up to 7.0m/s (1400ft/min) - tungsten; 5.5m/s (1100ft/min) - tool steel Vulcanised (tungsten) or clipped (tool steel) conveyor belts High cleaning performance Available with retractable cartridge U Type Cleaner Shuttles, trippers, single, reversing or bi-directional conveyors Belt speed up to 7.0m/s (1400ft/min) - tungsten Vulcanised (tungsten) or clipped (tool steel) conveyor belts High cleaning performance Available with retractable cartridge Single direction conveyors Belt speed up to 7.0m/s (1400ft/min) - tungsten; 5.5m/s (1100ft/min) - polyurethane Vulcanised (tungsten) or clipped (polyurethane) conveyor belts Easy to maintain

9 P Line Cleaner R Line Cleaner Single directional conveyors Belt speed up to 7.0m/s (1400ft/min) - tungsten; 5.5m/s (1100ft/min) - tool steel Vulcanised (tungsten) or clipped (tool steel) conveyor belts Easy to maintain due to retractable cartridge Tuff Line Cleaner Shuttles, trippers, single, reversing or bi-directional conveyors Belt speed up to 7.0m/s (1400ft/min) - tungsten; 5.5m/s (1100ft/min) - tool steel or polyurethane Vulcanised (tungsten) or clipped (tool steel or polyurethane) conveyor belts Easy to maintain due to retractable cartridge ES Cleaner Shuttles, trippers, single, reversing or bi-directional conveyors Belt speed up to 7.0m/s (1400ft/min) - tungsten; 5.5m/s (1100ft/min) - tool steel or polyurethane Vulcanised (tungsten or tool steel) or clipped (tool steel or polyurethane) conveyor belts Easy to maintain due to retractable cartridge and slide-on blades Low cost cleaner Easy to maintain due to slide-on blades Vulcanised (tungsten) or clipped (tool steel or polyurethane) conveyor belts All conveyors including shuttles, trippers, single, reversing or bi-directional conveyors Belt speed up to 5.5m/s (1100ft/min) PAGE 9

10 Pressure Roller Assembly Accessories Used in conjunction with any belt cleaning system Easy installation and adjustment Suits all rollers Stabilises belt for improved cleaner performance Stabilising Roller Assembly Water Control Unit with Bypass Stabilises belt for improved cleaner performance Used in conjunction with any belt cleaning system Easy installation and adjustment Suits all rollers Water Control Unit Controls water flow to sprays Filters water to prevent blocked sprays Bypass line allows for maintenance in operation Regulator allows water pressure to be adjusted whilst conveyor is operating Enclosed Water Control Unit with Bypass Controls water flow to sprays Filters water to prevent blocked sprays Regulator allows water pressure to be adjusted whilst conveyor is operating Controls water flow to sprays Filters water to prevent blocked sprays Protected by SS304 sloped roof cabinet Allows water pressure to be adjusted whilst conveyor is operating

11 Spray Bar with U Bolt Mounts Spray Bar with Clamp Block Mounts Significantly compact design Improves performance of cleaners Reduced weight for handling Simple mounting arrangement Air Control Box Single Compact design Improves performance of cleaners Reduced weight for handling Adjustable mounting arrangement Air Control Box Double Maintains constant air pressure on a single cleaner Enclosed by SS304 sloped roof cabinet Robust design Air Control Box Triple Maintains constant pressure on two cleaners Enclosed by SS304 sloped roof cabinet Robust design Auto Tensioner Maintains constant pressure on three cleaners Enclosed by SS304 sloped roof cabinet Robust design Hydraulically operated No external power or air required Self adjusting Maintains constant pressure PAGE 11

12 Conveyor Ploughs Conveyor belt ploughs are a critical component on every conveyor system. A belt plough provides protection to capital items within your conveyor system such as pulleys and conveyor belt. The belt plough removes any rogue product sitting on the return side of the conveyor belt. If this residual product is not removed there is an increased risk of damage to the conveyor belt and pulley lagging. Potential also exists for build-up to occur on the pulley which can create tracking issues, increasing the risk of damage to the conveyor belt. Head Pulley Tail Pulley Recommended Plough Location Take-up Pulley Recommended Plough Location

13 Floating Vee Plough Vee Ploughs Removes material to both sides of conveyor Easy install, maintain and self adjusting Turnbuckle provides adjustment Link arm bushes fitted to reduce vibration Only used on single directional conveyors Floating Failsafe Vee Plough Floating Bullnose Vee Plough Removes material to both sides of conveyor Easy install, maintain and self adjusting Link arm bushes fitted to reduce vibration Dual pole creates a parallelogram which prevents plough from flipping over Only used on single directional conveyors Removes material to both sides of conveyor Easy install, maintain and self adjusting Turnbuckle provides adjustment Link arm bushes fitted to reduce vibration Bullnose eliminates wear point at nose of plough Only used on single directional conveyors Floating Failsafe Bullnose Vee Plough Torsion Vee Plough Removes material to both sides of conveyor Easy install, maintain and self adjusting Link arm bushes fitted to reduce vibration Dual pole creates a parallelogram which prevents plough from flipping over Bullnose eliminates wear point at nose of plough Only used on single directional conveyors Removes material to both sides of conveyor Applies light tension to belt in order to maintain constant pressure Easy install, maintain and self adjusting Bullnose eliminates wear point at nose of plough Only used on single directional conveyors PAGE 13

14 Diagonal Plough Diagonal Ploughs Removes material to one side of conveyor Easy install, maintain and self adjusting All available in standard and heavy duty Only used on single directional conveyors Reversing Plough Removes material to one side of conveyor Easy install, maintain and self adjusting Used on multi-directional conveyors

15 Belt Trackers Conveyor belt tracking is a critical aspect on every conveyor system. There are many variables within a conveyor that can impact on belt tracking such as product loading, chute design, splice alignment, structure alignment, pulley alignment, idler alignment, build-up on, or worn pulley lagging. The installation of belt tracking devices in strategic locations protects your conveyor belt and structure from damage due to belt wander. Keeping your belt on track also eliminates any unwanted down-time which impacts on conveyor availability and production. PAGE 15

16 3 ROLL TROUGH Standard Duty Tracker 2 ROLL VEE RETURN FLAT RETURN Single direction conveyors Robust design 6mm ( 1 / 4 ) material Uses 200mm (8 ) diameter thrust plate in pivot area as opposed to bearings Tracks on the X/Y plane Custom built to suit your conveyor Heavy Duty Tracker 3 ROLL TROUGH 2 ROLL VEE RETURN FLAT RETURN Single direction conveyors Uses 200mm (8 ) diaameter thrust plate in pivot area as opposed to bearings Tracks on the X/Y plane Custom built to suit your conveyor Cam rollers support centre bearing and frame

17 Extra Heavy Duty Tracker 3 ROLL TROUGH 2 ROLL VEE RETURN FLAT RETURN Single or direction conveyors Heavy duty design 10mm ( 3 / 8 ) material Uses 300mm (12 ) diameter thrust plate in pivot area as opposed to bearings For use on high speed, high tonnage conveyors Tracks on the X/Y plane Custom built to suit your conveyor Inverted Vee Tracker Hydraulic Tracker Single or multi-directional conveyors Adjustable to suit any conveyor structure Locks belt into position Standard design to fit all conveyors Simple, light weight solution Single or multi-directional conveyors Uses thrust plate in pivot area as opposed to bearings For use on high speed, high tonnage conveyors Custom built to suit your conveyor Self powered Limit switch locates position of belt and corrects alignment by hydraulic pressure PAGE 17

18 Skirt Systems When operating a conveyor system, product losses due to spillage around a transfer point will occur if not correctly retained. This spillage will impact on the environment, equipment life and increase site hazards and operational costs. By understanding the product being conveyed, we are able to design solutions that will deliver significant improvements to your conveyor performance.

19 TuffClamp Skirt System TuffLock Skirt System All transfer points Flexible installation Easy adjustment/replacement Clamprail positively retained Rigid Poly Skirt System All transfer points Simple adjustment/replacement Robust design Rubber Skirt All transfer points Flexible installation Easy adjustment/replacement High abrasion resistance 85 shore A durometer (other durometers available on request) Low cost Available in 30m (100ft) rolls 65 durometer standard (other durometers available on request) Available in a range of thicknesses and widths Polyurethane Skirt High abrasion resistance 63 shore A durometer standard (other durometers available) Available in 30m (100ft) rolls Available in a range of thicknesses and widths 45º bevelled edge PAGE 19

20 Conveyor Belt Repair Our range of belt repair products provide a simple, fast curing and cost-effective solution to repairing a damaged or torn conveyor belt. The repair kits are a two part, 100% solids polyurethane compound for the rapid repair of rubber (fabric and steel cord) and PVC (solid woven) conveyor belts and linings. It is fast curing and provides an engineered grade bond extending the life of the belt, with minimal downtime.

21 Redi Repair Natural 85 Redi Repair Primer N85 Fast curing Self-mixing Cost efficient High quality bond High viscosity Redi Repair Cleaning Solution Single part, single coat primer Fast drying Prepares belt surface for repair Engineered grade bond Accessories Cleans contaminants from belt surface Prepares surface for primer application High quality Low cost Easy to use Redi Repair Kit Kit includes: 1100g Redi Repair 250ml Redi Repair cleaning solution 250ml Redi Repair primer Paint brush 150mm plastic scraper Static mixing nozzle Rubber gloves PAGE 21

22 Pulley Lagging Pulley lagging is a critical component on every conveyor system. The selection of the correct lagging type provides protection against wear to capital items within your conveyor system such as pulleys and conveyor belt. The use of incorrect lagging or no lagging at all will accentuate wear to the pulley shell or the return belt cover. Additionally, pulley lagging increases the capacity of a drive pulley within a conveyor system. The pattern within the lagging assists with the shedding of water and fines, minimising build-up on the pulleys and reducing the risk of damage due to poor tracking.

23 Rubber Strip Lagging Ceramic Drive Strip Lagging Drive and non-drive pulleys High shedding capabilities High abrasive resistance Improved drive performance Available in 6.5m (22ft) strips or 85m (279ft) rolls Available in Natural and FRAS/MSHA Ceramic Non-Drive Strip Lagging Drive pulleys Superior drive performance Excellent wear resistance Available in strips or 65m (213ft) rolls Tile bonded back and side face creating a rubber tear bond Available in Natural and FRAS/MSHA Polyurethane Strip Lagging Non-drive pulleys Excellent wear resistance Available in strips or 65m (213ft) rolls Tile bonded back and side face creating a rubber tear bond Available in Natural and FRAS/MSHA Non-drive pulleys Excellent abrasion resistance Good shedding performance Available in 6.5m (22ft) rolls Rubber tear bond between poly strip and backing rubber Polyurethane Hot Cast Lagging (Australia only) Non-drive pulleys Excellent abrasion resistance Eliminate joins Hot cast for superior adhesion TIR machined to reduce noise PAGE 23

24 General Accessories TS Global offers a range of accessories to assist with efficiency and safety when inspecting or maintaining your conveyor.

25 Roller Carrier Pulley Lifting Beam Suits all rollers Adjustable strap SWL of 50kgs (110lb) Designed with safety clasp to retain roller in place at all times Allows user to carry roller and maintain 3 points of contact on stairs and gantry INSPECTION DOOR Available in 4.5T, 6T and 12T variants Can be adjusted to suit a range of pulley faces Compact design fits into tight applications Allows pulley to be removed without removal of the belt CURRENT DESIGN Basic Inspection Door Premium Inspection Door Allows safe inspection of cleaners Retains dust within confines of transfer chute Improve accessibility for inspection or adjustment NEW STYLE while conveyor running Available in 3 sizes Allows safe inspection of cleaners Retains dust within confines of transfer chute Improve accessibility for inspection or adjustment while conveyor running Hinged safety mesh Available in 3 sizes PAGE 25

26 Warranty Statement The warranty provided by TS Global Pty Limited ( TS Global ) is set out in the TS Global Terms and Conditions of Sale at clauses 6.1 to 6.5 inclusive. Those clauses are set out below:- 6.1 Subject to these conditions of sale, TS GLOBAL warrants that the Goods are free of defects both in material and workmanship and are of merchantable quality. The liability of TS GLOBAL pursuant to this warranty or any other warranty implied by operation of any statute including the Competition and Consumer Act 2010 (Cth) (as amended) shall be limited to the cost of replacing defective Goods, the cost of obtaining equivalent Goods, or the cost of repairing the Goods at TS GLOBAL s discretion provided that in all such cases any costs of dismantling and reassembly shall be borne by the Customer. 6.2 The warranty set out at clause 6.1 is subject to the following: a. the warranty applies for a period of 12 months commencing on the date of invoice of the Goods; b. the warranty does not apply to consumable components that are subject to normal wear and tear; c. the Customer must provide TS GLOBAL with either an invoice number or purchase order number referencing the defective Goods; d. the defects to the Goods must have arisen solely from faulty materials or workmanship; and e. the damage to the Goods must not arise from: i. incorrect installation of the Goods contrary to the instructions contained within TS Global s Installation and Operation Manuals; ii. improper adjustment, calibration or operation by the Customer; iii. the use of accessories including consumables, hardware, or software which were not manufactured by or approved in writing by TS GLOBAL; iv. any contamination or leakages caused or induced by the Customer; v. any modifications of the Goods which was not authorised in writing by TS GLOBAL; vi. any misuse of the Goods by the Customer; vii. any use or operation of the Goods outside of the physical, electrical or environmental specifications of the Goods; viii. inadequate or incorrect site preparation; ix. inadequate or improper maintenance of the Goods; or x. incorrect handling of the Goods. 6.3 If the Goods are not manufactured by TS GLOBAL the guarantee of the manufacturer of those Goods is accepted by the Customer and is the only guarantee given to the Customer in respect of the Goods. TS GLOBAL agrees to assign to the Customer on request made by the Customer the benefit of any warranty or entitlement to the Goods that the manufacturer has granted to TS GLOBAL under any contract or by implication or operation of law to the extent that the benefit of any warranty or entitlement is assignable. 6.4 Except as provided in these conditions, all express and implied warranties, guarantees and conditions under statute or general law as to merchantability, description, quality, suitability or fitness of the Goods for any purpose or as to design, assembly, installation, materials or workmanship or otherwise are expressly excluded. TS GLOBAL is not liable for physical or financial injury, loss or damage or for consequential loss or damage of any kind arising out of the supply, layout, assembly, installation or operation of the Goods or arising out of TS GLOBAL s negligence or in any way. 6.5 Nothing in these conditions shall be read or applied so as to exclude, restrict or modify or have the effect of excluding, restricting or modifying any condition, warranty, guarantee, right or remedy implied by law (including the Competition and Consumer Act 2010) and which by law cannot be excluded, restricted or modified. This Warranty Statement must be read in conjunction with TS Global s Terms and Conditions of Sale. DOCUMENT ID: WY-E04C01-036

27 PAGE 27

28 DISTRIBUTED BY MKT-BR-CAT PO Box 103, HRMC NSW Laurio Place, Mayfield West NSW 2304 ABN PHONE sales@tsglobal.net.au WEB