Food Service Catalog. Pacific Gas and Electric Company COMMERCIAL COMBINATION OVEN (ELECTRIC) COMMERCIAL COMBINATION OVEN (GAS)

Transcription

1 Food Service Catalog Energy Efficiency Rebates for Your Business Carefully read the specifications below to determine that you are installing a qualifying product(s). Customers applying for a gas measure must have a PG&E commercial gas account, and customers applying for an electric measure must have a PG&E commercial electric account. All incentives apply toward the purchase of new or replacement energy-efficient equipment. Used or rebuilt equipment is not eligible. Customers must provide proof that the appliances meet the energy-efficiency specifications. For a list of qualifying products for the Food Service Equipment, visit COMMERCIAL COMBINATION OVEN (ELECTRIC) The tested oven must meet or exceed heavy load cooking energy efficiency of > 60% utilizing American Society for Testing and Materials (ASTM) Standard F1639. F100 Commercial Combination Oven (Electric) $1,000.00/Oven COMMERCIAL COMBINATION OVEN (GAS) The tested oven must meet or exceed heavy load cooking energy efficiency of > 40% utilizing ASTM Standard F1639. F101 Commercial Combination Oven (Gas) $750.00/Oven COMMERCIAL CONVECTION OVEN (ELECTRIC) The tested oven must meet or exceed heavy load potato cooking energy efficiency of > 70% utilizing ASTM Standard F1496. F102 Commercial Convection Oven (Electric) $350.00/Oven COMMERCIAL CONVECTION OVEN (GAS) The tested oven must meet or exceed heavy load potato cooking energy efficiency of > 40% utilizing ASTM Standard F1496. F103 Commercial Convection Oven (Gas) $500.00/Oven COMMERCIAL RACK OVEN (GAS) Rebates are not available for purchases prior to 7/1/2006. The tested commercial rack oven must meet or exceed baking energy efficiency of > 50% utilizing ASTM Standard F2093. F141 Commercial Rack Oven Single (Gas) $1,000.00/Single Oven F142 Commercial Rack Oven Double (Gas) COMMERCIAL CONVEYOR OVEN (GAS) $2,000.00/Double Oven Rebates are not available for purchase prior to 4/1/2008. The tested commercial conveyor oven must meet or exceed baking energy efficiency of > 42% utilizing ASTM Standard F1817. Small convey or ovens with total conveyor width of < 25-in. must also have an idle energy rate of < 29,000 Btu/h. Large conveyor ovens with total conveyor width of > 25-in. must also have an idle energy rate of < 57,000 Btu/h. Multiple-deck oven configurations are paid per qualifying oven deck. F168 Commercial Conveyor Oven - Small < 25-in. width (Gas) $500.00/Deck F169 Commercial Conveyor Oven - Large > 25-in. width (Gas) $750.00/Deck COMMERCIAL FRYER (ELECTRIC) The commercial fryer must meet ENERGY STAR specification for energy efficiency or must have a tested heavy load cooking energy efficiency of > 80% utilizing ASTM Standard F1361. Multiple vat configurations are paid per qualifying vat. F104 Commercial Fryer (Electric) $200.00/Vat COMMERCIAL LARGE VAT FRYER (ELECTRIC) Rebates are not available for purchases prior to 7/1/2006. The commercial fryer must have a tested heavy load (French fry) cooking energy efficiency of > 80% utilizing ASTM Standard F2144. Multiple vat configurations are paid per qualifying vat. F138 Commercial Large Vat Fryer (Electric) $200.00/Vat COMMERCIAL FRYER (GAS) The commercial fryer must meet ENERGY STAR specifications for energy efficiency or must have a tested heavy load cooking energy efficiency of > 50% utilizing ASTM Standard F1361. Multiple vat configurations are paid per qualifying vat. F105 Commercial Fryer (Gas) $500.00/Vat COMMERCIAL LARGE VAT FRYER (GAS) Rebates are not available for purchases prior to 7/1/2006.The commercial fryer must have a tested heavy load (French fry) cooking energy efficiency of > 50% utilizing ASTM Standard F2144. Multiple vat configurations are paid per qualifying vat. F139 Commercial Large Vat Fryer (Gas) $500.00/Vat

2 Food Service Catalog Energy Efficiency Rebates for Your Business COMMERCIAL GLASS DOOR REFRIGERATORS The refrigeration system shall be built-in (packaged). Cases with remote refrigeration systems do not qualify. Customers must provide proof that the appliance meets the CEE Tier II energy efficiency specifications using ASHRAE Standard (38 F +/- 2 F). Total Volume (foot 3 ) CEE Maximum Daily Energy Use 1 Section; <19 ft 3, CEE Tier II < V kwh/day 1 Section; ft 3, CEE Tier II < V kwh/day 2 Section; ft 3, CEE Tier II < V kwh/day 3 Section; ft 3, CEE Tier II < V kwh/day F107 Commercial Griddle (Gas) F117 Commercial Glass Door Refrigerators, < 19 ft 3, CEE Tier II $75.00/Unit F118 Commercial Glass Door Refrigerators, ft 3, CEE Tier II $100.00/Unit F119 Commercial Glass Door Refrigerators, ft 3, CEE Tier II $125.00/Unit F120 Commercial Glass Door Refrigerators, ft 3, CEE Tier II $150.00/Unit COMMERCIAL GRIDDLE (ELECTRIC) The tested griddle must meet or exceed heavy load cooking energy efficiency of > 70% utilizing ASTM Standard F1275. F106 Commercial Griddle (Electric) $300.00/Griddle COMMERCIAL GRIDDLE (GAS) The tested griddle must meet or exceed heavy load cooking energy efficiency of > 38% utilizing ASTM Standard F1275. $125.00/Griddle COMMERCIAL ICE MACHINES New Specifications and Rebate Levels are Effective for all Purchases and Installations Effective 1/1/2008 This specification covers machines generating 60 grams (2 oz.) or lighter ice cubes, as well as flaked, crushed and fragmented ice makers. Performance data is based on ARI Standard 810. Only air-cooled machines (self contained, ice making heads, or remote condensing) are eligible. The efficiency specifications for the two qualifying tiers are equivalent to ENERGY STAR or CEE Tier III. To qualify the entire ARI tested Ice making system must be purchased to qualify. Remote machines must be purchased with qualifying remote condenser or remote condenser/compressor unit. Visit for product information and testing procedures. Specifications are available at and The test method must be in accordance with the Air-Conditioning and Refrigeration Institute (ARI) Standard 810. ENERGY STAR F154 F155 F156 F157 F158 F159 F lbs/day $50.00/Machine lbs/day $50.00/Machine lbs/day $75.00/Machine lbs/day $75.00/Machine lbs/day $125.00/Machine lbs/day $200.00/Machine > 1500 lbs/day $250.00/Machine Super Efficient CEE Tier III F lbs/day $100.00/Machine F162 F163 F164 F165 F166 F lbs/day $100.00/Machine lbs/day $150.00/Machine lbs/day $150.00/Machine lbs/day $250.00/Machine lbs/day $400.00/Machine > 1500 lbs/day $500.00/Machine

3 Food Service Catalog Energy Efficiency Rebates for Your Business COMMERCIAL STEAM COOKER (ELECTRIC) The commercial steam cooker must meet ENERGY STAR specifications for energy efficiency or must have a tested heavy load potato cooking energy efficiency of > 50% utilizing ASTM Standard F1484. F108 Commercial Steam Cooker (Electric) $750.00/Steamer COMMERCIAL STEAM COOKER (GAS) The commercial steam cooker must meet ENERGY STAR specifications for energy efficiency or must have a tested heavy load potato cooking energy efficiency of > 38% utilizing ASTM Standard F1484. F109 Commercial Steam Cooker (Gas) $750.00/Steamer COMMERCIAL SOLID DOOR FREEZERS The refrigeration system shall be built-in (packaged). Cases with remote refrigeration systems do not qualify. Customers must provide proof that the appliance meets the CEE Tier II energy efficiency specifications using ASHRAE Standard (0 F +/- 2 F). Total Volume (foot 3 ) CEE Maximum Daily Energy Use 1 Section; <19 ft 3, CEE Tier II < 0.28 V kwh/day 1 Section; ft 3, CEE Tier II < 0.28 V kwh/day 2 Section; ft 3, CEE Tier II < 0.28 V kwh/day 3 Section; ft 3, CEE Tier II < 0.28 V kwh/day F128 F129 F130 F131 V=Internal volume in cubic feet (ft 3 ) Commercial Solid Door Freezers, <19 ft 3 $100.00/Unit Commercial Solid Door Freezers, ft 3 $200.00/Unit Commercial Solid Door Freezers, ft 3 $325.00/Unit Commercial Solid Door Freezers, ft 3 $500.00/Unit COMMERCIAL SOLID DOOR REFRIGERATORS The refrigeration system shall be built-in (packaged). Cases with remote refrigeration systems do not qualify. Customers must provide proof that the appliance meets the CEE Tier II energy-efficiency specifications using ASHRAE Standard (38 F +/- 2 F). V=Internal volume in cubic feet(ft 3 ) F132 Commercial Solid Door Refrigerators, < 19 ft 3 $75.00/Unit F133 F134 F135 This measure does not include cook and hold equipment. All measures must be electric hot food holding cabinets that are fully insulated and have solid doors. Qualifying cabinets must not exceed the maximum idle energy rate of 20 Watts per cubic foot in accordance with the ASTM Standard F2140 test method. F110 Insulated Holding Cabinets, Full Size $300.00/Unit F112 Product Description CEE Tier II Maximum Daily Energy Use 1 Section; < 19 ft 3 < 0.06 V kwh/day 1 Section; ft 3 < 0.06 V kwh/day 2 Section; ft 3 < 0.06 V kwh/day 3 Section; ft 3 < 0.06 V kwh/day Commercial Solid Door Refrigerators, ft 3 $100.00/Unit Commercial Solid Door Refrigerators, ft 3 $150.00/Unit Commercial Solid Door Refrigerators, ft 3 $225.00/Unit INSULATED HOLDING CABINETS Insulated Holding Cabinets, Three-Quarter Size $250.00/Unit F111 Insulated Holding Cabinets, Half Size $200.00/Unit

4 Food Service Catalog Energy Efficiency Rebates for Your Business COMMERCIAL KITCHEN VENTILATION CONTROL - RETROFIT (ELECTRIC) Rebates are not available for purchases or installations prior to 10/1/2007. This incentive applies towards the purchase and installation of a new commercial kitchen exhaust hood control system installed in an existing dedicated commercial kitchen exhaust hood and make-up air system. The control system must be used in conjunction with variable speed fan motor controls. Project Installation Worksheet must be submitted with the rebate application. Only pre-approved control systems will qualify for an incentive. F150 Ventilation Control Retrofit (Electric) /Exhaust fan hp COMMERCIAL KITCHEN VENTILATION CONTROL - NEW HOOD (ELECTRIC) Rebates are not available for purchases or installations prior to 10/1/2007. This incentive applies towards the purchase and installation of a new commercial kitchen exhaust hood control system installed in a new dedicated commercial kitchen exhaust hood and make-up air system. The control system must be used in conjunction with variable speed fan motor controls. Project Installation Worksheet must be submitted with the rebate application. Only pre-approved control systems will qualify for an incentive. ebate/unit Measure F151 Ventilation Control New Hood (Electric) /Exhaust fan hp For more information visit or call the Business Customer Service Center at "PG&E" refers to, a subsidiary of PG&E Corporation All rights reserved. These offerings are funded by California utility customers and administered by PG&E under the auspices of the California Public Utilities Commission Printed on recycled paper using soy-based inks. Rev. April 2008 C-0114

5 SECTION 1 Energy Efficiency Rebates for Homes, Businesses and Multifamily Properties Complete pages 1 and 2 of this application. Please see pages 3 and 4 for instructions. SECTION 2 CUSTOMER INFORMATION 2009 INTERIM APPLICATION FORM This Application Form and Instructions supersedes and replaces the Energy Efficiency Rebate Application Form and Instructions. ACCOUNT INFORMATION PG&E Account Number Name as it appears on PG&E bill Name of mobile home park or apartment complex PG&E Electric Service ID # Address where item(s) installed Apt/Space # City State Zip PG&E Gas Service ID # If you have multiple Service ID #s, please list in section 4. TENANT RESIDENTIAL CUSTOMER Single Family YEAR BUILT PROPERTY OCCUPIED BY Single Story Multi-Story OWNER PROPERTY TYPE Mobile Home MULTIFAMILY PROPERTY CUSTOMER SQUARE FOOTAGE Single Wide Double Wide BUSINESS CUSTOMER (see page 2, section 8) Mailing address (If different from installation address) City State Zip Contact name Contact telephone number Contact fax number address SECTION 3 BUSINESS PAYEE TAX INFORMATION Tax Status: Corporation Partnership Individual/Sole Proprietor Exempt (Tax exempt, non-profit) Tax ID number: EIN Federal Tax ID SSN Tax Liability: Rebates are taxable if greater than $600 for business customers, and will be reported to the IRS unless you are exempt. will report your rebate as income to you on the IRS Form 1099 unless you have checked Corporation or Exempt tax status above. You are urged to consult your tax advisor concerning the taxability of rebates. is not responsible for any taxes that may be imposed on your business as a result of receipt of this rebate. SECTION 4 REBATE PRODUCT INFORMATION Please refer to your PG&E bill for your Service ID #, PG&E s Energy Efficiency Rebate Product Catalog(s) for, Unit Measure and Rebate per Unit and your invoice/receipt for manufacturer and model number. Please locate the appropriate product(s) in the affiliated technology catalog for either Homes or Businesses. Multifamily Properties see page 3, 4D. Enter the PG&E Service ID #, the appropriate PG&E catalog product code number, manufacturer name, model number, installation date, unit measure, number of units, rebate per unit and rebate total in the table below. Read the product specifications carefully before proceeding with your purchase. SERVICE ID # GAS/ELECTRIC (10 DIGITS) PRODUCT CODE # (3 OR 4 DIGITS) MANUFACTURER MODEL # INSTALL DATE UNIT MEASURE (SQ.FT.,WATTS, TON) # OF UNITS A REBATE PER UNIT B REBATE TOTAL A x B = C SECTION 5 SIGN HERE X CUSTOMER SIGNATURE I HAVE READ AND UNDERSTOOD THE TERMS AND CONDITIONS ON PAGE 2, SECTION 6 OF THIS FORM. I CERTIFY THAT THE INFORMATION I HAVE PROVIDED IS TRUE AND CORRECT AND THE PRODUCT(S) AND/OR EQUIPMENT FOR WHICH I AM REQUESTING A REBATE MEETS THE REQUIREMENTS IN THIS APPLICATION. Customer Name (Please Print and Sign in Ink) Signature Date Product offerings and rebate amounts are subject to change during the program term. TOTAL REBATE DUE: Mail the completed forms and other required documentation with proofs of purchase to: Integrated Processing Center Energy Efficiency Rebates - MM P.O. Box 7265 San Francisco, CA PROOF OF PURCHASE INCLUDED? YES Web 1

6 Energy Efficiency Rebates for Homes, Businesses and Multifamily Properties SECTION 6 TERMS AND CONDITIONS: READ, SIGN, AND DATE PAGE 1, SECTION INTERIM APPLICATION FORM This Application Form and Instructions supersedes and replaces the Energy Efficiency Rebate Application Form and Instructions. 1. To be eligible for a rebate I understand that I must be a customer of (PG&E) with an active meter serviced by PG&E. I understand that if I am installing products at more than one residence or facility, I must identify each individual address and Service ID # on the "Rebate Product Information" section. All uses herein of the words "install", "installation", or similar phrases shall mean complete installation such that the subject products are fully functional and operational. 2. As a business customer, I agree to provide PG&E with 100% of the energy savings for the rated life of the product(s) or for a period of three (3) years from receipt of rebate, whichever is less. If I do not provide the energy savings or if I cease to be a customer of PG&E during the 3 years, I shall refund a prorated amount of rebate dollars based on the time installed. 3. I understand the program term is January 1, 2009 through December 31, 2009 or sooner if allocated funds are depleted. During this program term, qualifying new products installed in 2009 are eligible for a rebate. Program offerings and rebate amounts may change during the program term. Resale products, products leased less than 3 years, rebuilt, rented, received from warranty or insurance claims, exchanged, won as a prize, or new parts installed in existing products, do not qualify. The program may be modified or terminated without prior notice. Qualifying new products purchased and installed January 1, 2006 through December 31, 2008 are eligible for a rebate based on the Energy Efficiency Rebates for Homes, Businesses and Multifamily Properties terms and conditions and subject to availability of program funds. To be eligible for a rebate, applications with proper supporting documentation must be submitted to PG&E s Integrated Processing Center (IPC) postmarked no later than March 31, I understand that this signed and dated "2009 Interim Application Form", completed "Rebate Product Information" incorporated herein by this reference, all appropriate proof(s) of purchase, and other required documentation as referenced in this application must be sent to PG&E's IPC to be considered eligible for payment of a rebate. A rebate check for qualifying product(s) is generally mailed 6 to 8 weeks after PG&E receives and approves a completed application including all required documentation unless an application is selected for a verification, which may add additional time. An incomplete application cannot be processed for payment. 5. I will allow, if requested, a representative from PG&E, the California Public Utilities Commission (CPUC), or any authorized third party reasonable access to my property to verify the installed product I have purchased before a rebate is paid. I understand that a rebate will not be paid if I refuse to participate in any required verification. The verification of installation must be scheduled within 30 days of customer contact by PG&E. I understand that PG&E may contact the qualifying product vendor and/or installer, if needed, to verify purchase and/or installation and may provide my name and/or address to complete this verification. 6. I have installed a qualifying product(s) and understand that the energy-efficiency eligibility requirements for each stated product (as defined in the Catalog) determines the rebate amount. The rebate amount cannot exceed the purchase price. 7. I have installed a qualifying new product(s) in accordance with all applicable federal, state, and local laws, building codes, and manufacturer s specifications. 8. I understand that I cannot receive a rebate for the same product or equipment from more than one California investor-owned utility or third party energy-efficiency program offering rebates, financing or other rebates funded with CPUC Public Goods Charge funds. Products discounted by PG&E at the point of sale are not eligible for additional rebates. 9. THE UTILITY MAKES NO REPRESENTATION OR WARRANTY, AND ASSUMES NO LIABILITY WITH RESPECT TO QUALITY, SAFETY, PERFORMANCE, OR OTHER ASPECT OF ANY DESIGN, SYSTEM OR APPLIANCE INSTALLED PURSUANT TO THIS AGREEMENT, AND EXPRESSLY DISCLAIMS ANY SUCH REPRESENTATION, WARRANTY OR LIABILITY. I AGREE TO INDEMNIFY PACIFIC GAS & ELECTRIC COMPANY, ITS AFFILIATES, SUBSIDIARIES, PARENT COMPANY, OFFICERS, DIRECTORS, AGENTS, AND EMPLOYEES AGAINST ALL LOSS, DAMAGE, EXPENSE, FEES, COSTS AND LIABILITY ARISING FROM ANY MEASURES INSTALLED. 10.If a tenant, I am responsible for obtaining the property owner's permission to install the measure for which I am applying for a rebate payment. My signature on this application indicates I have obtained this permission. 11.I understand that PG&E is not responsible for items lost or destroyed in transit through the mail or electronic medium. Original applications will become the property of PG&E. SECTION 7 AUTHORIZED BY: PG&E Customer of Record (please print) Signature Date Check should be made payable to: PAYMENT RELEASE AUTHORIZATION COMPLETE THIS SECTION ONLY IF PAYMENT IS GOING TO SOMEONE OTHER THAN THE PG&E CUSTOMER OF RECORD ON PAGE 1, SECTION 2. I AM AUTHORIZING THIS PAYMENT OF MY REBATE TO THE THIRD PARTY ( PAYEE ) NAMED BELOW AND I UNDERSTAND THAT I WILL NOT BE RECEIVING THE REBATE CHECK FROM PG&E. IF PAYEE IS A BUSINESS, PAGE 1, SECTION 3 NEEDS TO BE COM- PLETED. I ALSO UNDERSTAND THAT MY RELEASE OF THE PAYMENT TO THE THIRD PARTY DOES NOT EXEMPT ME FROM THE RE- BATE REQUIREMENTS OUTLINED IN THIS APPLICATION. FOR UTILITY USE ONLY Post field date Vendor number Rep ID Rep phone # Mail check to field office CEE ID TPI code Payee: Individual / Business name Telephone number Total rebate Reviewer/Authorized signature #1 Payee mailing address City State Zip Authorized signature #2 (if > $5,000) SECTION 8 BUSINESS PROPERTY TYPE DESCRIPTION Education Community College Education Primary School Education Secondary School Education University Assembly Grocery Health Medical Hospital Health Medical Clinic Lodging Guest Rooms If not found, please describe: Lodging Hotel Lodging Motel Manufacturing Bio Tech Manufacturing Light Industry Office Large Office Small Retail Single Story Small Retail Single Story Large Retail 3 Story Large Product offerings and rebate amounts are subject to change during the program term. Restaurant Fast Food Restaurant Sit Down Food Processing and Kindred Products Paper and Allied Products Chemicals and Allied Products Petroleum and Coal Products Metals Storage Warehouse Conditioned Storage Warehouse Unconditioned Storage Warehouse Refrigerated Web 2

7 Energy Efficiency Rebates for Homes, Businesses and Multifamily Properties 2009 INTERIM APPLICATION INSTRUCTIONS This Application Form and Instructions supersedes and replaces the Energy Efficiency Rebate Application Form and Instructions. s Energy Efficiency Rebates are available to eligible PG&E customers who install qualifying energy-efficient products in homes, businesses or multifamily properties. Please refer to the appropriate product catalog for information on product specifications including energy-efficiency requirements, rebate amounts and product codes. APPLICATION INSTRUCTIONS MAIL APPLICATION TO: Integrated Processing Center Energy Efficiency Rebates - MM P.O. Box 7265 San Francisco, CA CONTACT INFORMATION Residential Customers Business Customers energysavingsrebates/ rebatesincentives/ Multifamily Property Owners Read the Terms and Conditions on page 2, section 6 and sign your acceptance on page 1, section 5 included in this application. 2. Read the Product Specifications for the item(s) in the corresponding catalog for which you are applying. The catalog will detail the requirements for qualifying products including eligibility dates, if applicable. 3. Install qualifying new product(s) between January 1, 2009 and December 31, These dates may change if funds are depleted sooner. Qualifying products must be installed before submitting your application. All applications should be returned within 90 days of purchase date to be considered eligible. 4. Complete the Application Form - pages 1 and 2. You will need the rebate catalog affiliated with your purchase, your receipt and a copy of your PG&E bill: A. Account Information page 1, section 1. Complete all required fields, account number(s), Property Occupied By and Property Type. B. Customer Information page 1, section 2. Print your name as it appears on your PG&E bill, address information and telephone number. Provide installation address, mailing address and contact information. C. Business Customers or Multifamily Property Owners or Energy Efficiency Trade Professionals who will be authorized to receive the rebate from the PG&E Customer of Record, please complete page 1, section 3 with your Tax Status and Tax ID Number. D. Rebate Product Information - page 1, section 4. Complete all required information including: Service ID #, product code number, manufacturer, model number, install date, unit of measure, number of units, rebate per unit and total rebate amount. Business Applicants: you must include Service ID # for the location of each product if products were installed at different service addresses. Multifamily Properties Applicants: you must complete the Apartment Product Location Form or Common Area Product Location Form in the Multifamily Properties Catalog, instead of page 1, section 4 of this application form. E. Business Property Type Description - page 2, section 8. Business customers must check one of the boxes or provide a written description of their business. F. Multifamily Properties - In addition to the attached forms, Multifamily property owners MUST complete the Reservation Form in the Multifamily Properties Catalog. 5. Signature and date required in the following sections: A. Page 1, section 5, accepting the Terms and Conditions. Your signature is required and must be in INK to accept the Terms and Conditions of the application. B. Rebate check to be paid to a trade professional, landlord or other party? In addition to providing your signature on page 1, section 5 when the rebate is to be paid to a party other than the Customer of Record as provided on the PG&E bill, the Payment Release Authorization on page 2, section 7 of this application MUST be signed in INK. 6. Make and Keep a Copy of the completed Application Form and all required documentation, such as receipts, and Home Improvement Contracts for your records. Submitted applications will become the property of PG&E. 7. Mail the completed Application Form and other required documentation with proofs of purchase to. Product offerings and rebate amounts are subject to change during the program term. Web 3

8 Energy Efficiency Rebates for Homes, Businesses and Multifamily Properties 2009 INTERIM APPLICATION INSTRUCTIONS This Application Form and Instructions supersedes and replaces the Energy Efficiency Rebate Application Form and Instructions. PROOF OF PURCHASE REQUIREMENTS Proof of purchase and other documentation required to process your rebate application may differ depending on who completes the installation you or your contractor. All Customers Homes, Businesses and Multifamily Properties 1. Retail Product Receipt/Invoice Proof of purchase and supporting documentation should be submitted within 90 days of purchase date and must include all of the following information: A. Retailer/Contractor name, address, and phone number B. Itemized listing of each product including quantity, product description, manufacturer, model number, or other identifying information, i.e., SKU # as appropriate C. Purchase price per product D. Date Paid in Full or payment terms, such as Charge or Net 30 E. Product installation date Read the product specifications included in the appropriate catalog to make sure all requirements are met. Residential and Multifamily Property Customers Only Depending on your energy-efficiency project, you may need to submit a Home Improvement Contract as additional documentation to be submitted to PG&E, along with your proof of purchase. 2. Home Improvement Contract (HIC) A. The California State License Board (CSLB) requires that licensed contractors must provide you with an HIC if the materials and labor total for the product(s) and installation is $500 or more. It is recommended that you request an HIC from your contractor even if the contractor s product and installation costs are less than $500. B. If an HIC is your proof of purchase it must be given to you by your contractor and must be signed and dated by both you and your licensed contractor. C. If the signatures are not dated, the date that the HIC was written will determine the product order/purchase date. For additional information on Home Improvement Contracts or the status of your contractor s license, visit or call the Contractors State License Board at CSLB. BUILDING A NEW HOME? CUSTOMER DEFINITIONS CONTACT INFORMATION For more information about energy-efficient new homes, please visit SOLAR INCENTIVES AVAILABLE For more information about the California Solar Initiative and solar incentives, please visit Residential Customers living in a Home, Mobile Home, Apartment or Condominium. Business Customers and Commercial Property Owners. Multifamily Properties - Residential/ apartment buildings and condominium communities of two or more units, and mobile home parks. Products may be installed in existing apartments, or in the common areas of apartment buildings, condominium communities, and mobile home parks. Residential Customers Business Customers energysavingsrebates/ rebatesincentives/ Multifamily Property Owners Product offerings and rebate amounts are subject to change during the program term. www. pge.com "PG&E" refers to, a subsidiary of PG&E Corporation All rights reserved. This program is funded by California utility customers and administered by, under the auspices of the California Public Utilities Commission. Printed on recycled paper using soy-based inks January 2009 C-0100 Web 4