Product Specification Sheet

Transcription

1 (EAB-LGN/LOE/LPK/LRD/LYW) Permanent, matte colored paper labels Facestock 82 (77-87) micron ISO 534 Adhesive 15 micron Liner (glassine) 52 (50-58) micron ISO 534 Shear Strength 100 min FTM 8 Initial Tack >11 N FTM 9 Peel Resistance Stainless Steel 15,4 N/25 mm FTM 1 (72 hours) Temperature Range (Adhesive) -20 to +80 C Certifications: The material is REACH and RoHS Compliant; The research centre ISEGA has given the adhesive approval according to the European requirements for direct contact with dry, moist and such kind of fatty foodstuffs which have a correction factor of at least 4 according to the Regulation (EU) Nº10/2011. Approved for UNI-EN 71/3 "toys security" norms and conformed to the FDA, 21 CFR Ch.I (April 1, 2013 edition) Printability: Suited for full-color copying machines and laser printers.

2 (EAB-WE/YW) Permanent, matte white or yellow polyester labels Facestock 58 micron DIN Adhesive 20 micron Liner (kraft paper) 97 micron ISO 534 Shear Strength 10 hours FTM 8 Initial Tack 9,0 N/25 mm FTM 9 Peel Resistance Stainless Steel * Temperature Range (Adhesive) -20 to +100 C Certifications: Material meets REACH and RoHS requirements (2011/65/EU). Printability: Specially designed laser printable material for product, logistics and industrial variable information applications. It can be also used in address labelling or other information labelling with difficult environmental conditions in SOHO end-uses. Due to the pre-treatment, the film is printable by common label printing methods like letterpress, flexography, screen and offset. Special inks designed for non-absorbent materials should be used. Laser and copier.

3 (EAB-WE/YW) Permanent, matte white or yellow polyester labels Facestock 58 micron DIN Adhesive 20 micron Liner (kraft paper) 97 micron ISO 534 Shear Strength 10 hours FTM 8 Initial Tack 9,0 N/25 mm FTM 9 Peel Resistance Stainless Steel * Temperature Range (Adhesive) -20 to +100 C Certifications: Material meets REACH and RoHS requirements (2011/65/EU). Printability: Specially designed laser printable material for product, logistics and industrial variable information applications. It can be also used in address labelling or other information labelling with difficult environmental conditions in SOHO end-uses. Due to the pre-treatment, the film is printable by common label printing methods like letterpress, flexography, screen and offset. Special inks designed for non-absorbent materials should be used. Laser and copier.

4 (EAB-SR) Permanent, glossy silver polyester labels on sheet for monochrome copying machines and laser printers Facestock 58 micron DIN Adhesive 20 micron Liner (kraft paper) 97 micron ISO 534 Shear Strength 10 hours FTM 8 Initial Tack 9,0 N/25 mm FTM 9 Peel Resistance Stainless Steel * Temperature Range (Adhesive) -20 to +100 C Certifications: Material meets REACH and RoHS requirements (2011/65/EU). Printability: Specially designed laser printable material for product, logistics and industrial variable information applications. It can be also used in address labelling or other information labelling with difficult environmental conditions in SOHO end-uses for demanding substrates needing high adhesion properties. Due to the pre-treatment, the film is printable by common label printing methods. Special inks should be used. Suited for monochrome laser and thermal transfer.

5 (EAB-SF) Permanent, top-coated matte silver polyester labels with checkerboard effect Facestock 50 (+/- 10%) micron ASTM D 3652 Adhesive (+/- 10%) micron ASTM D 3652 Liner (kraft paper) 90 (+/- 10%) micron ASTM D 3652 Shear Strength 50+ hours ASTM D 3654 Method A Initial Tack 540,0 g/cm² ASTM D 2979 Peel Resistance Stainless Steel 15 N/25 mm FTM 1 (72 hours) Glass 15 N/25 mm FTM 1 (72 hours) Polypropylene 3 N/25 mm FTM 1 (72 hours) Application Temperature min. +10 C Temperature Range (Adhesive) -40 to +150 (Tamper evident max. 40) C Certifications: Material meets REACH and RoHS requirements (2011/65/EU). Printability: Suited for full-color copying machines and laser printers. Further Information: This product shows tampering when removal is attempted by leaving a checkerboard pattern on the application surface. Tamper evident feature of this product becomes permanently nonfunctional after exposure to 40 C temperature. Expected exterior life dependant on substrate but label material is outdoor resistant for at least 2 years.

6 (EAB-PP) Permanent, matte white paper labels Facestock 90 (+/- 5) micron ISO 534 Adhesive 18 (+/- 1) micron Liner (kraft paper) 56 (52-60) micron ISO 534 Shear Strength 100 min FTM 8 Initial Tack 10,3 N FTM 9 Peel Resistance Stainless Steel 15,4 N/25 mm FTM 1 (72 hours) Temperature Range (Adhesive) -20 to +80 C Certifications: Material meets REACH and RoHS requirements (2002/95/CE). Adhesive approved: EN 71-3 Toy Safety, 71-9 Toy Safety, Packaging and Packaging Waste Directive 94/62/CE, ISEGA, indirect and direct contact with foodstuffs. Printability: Suited for full-color copying machines and laser printers.

7 (EAB-PA) Removable, matte white paper labels Facestock 72 micron Adhesive 25 micron Liner (kraft paper) 54 micron Shear Strength 30 min Initial Tack 300,0 g/25 mm Peel Resistance Stainless Steel * Temperature Range (Adhesive) -10 to +80 C Certifications: The material is REACH and RoHS Compliant; adhesive in accordance with UN-EN 71-3 toy safety regulations. Printability: Suited for full-color copying machines and laser printers. Further Information: Degree of removability depends on surface and method of application (testing recommended prior to use).

8 (EAB-LT) Permanent, highly clear transparent polyester labels Facestock 25 (+/- 10%) micron ASTM D 3652 Adhesive (+/- 10%) micron ASTM D 3652 Liner (lacquer coated layflat release liner) 90 (+/- 10%) micron ASTM D 3652 Shear Strength 100+ hours FTM 8 Initial Tack 280,0 g/cm² ASTM D 2979 Peel Resistance Stainless Steel 451 N/m FTM 1 (72 hours) Glass 429 N/m FTM 1 (72 hours) Application Temperature min. +10 C Temperature Range (Adhesive) -40 to +150 C Certifications: Material meets REACH and RoHS requirements (2011/65/EU), UL recognized UL file NO. MH Printability: Suited for full-color copying machines and laser printers or unprinted as a protective laminate.

9 (EAB-CR) Permanent, matte transparent polyester labels Facestock 43 micron DIN Adhesive 20 micron Liner (kraft paper) 97 micron ISO 534 Shear Strength 10 hours FTM 8 Initial Tack 9,0 N/25 mm FTM 9 Peel Resistance Stainless Steel Temperature Range (Adhesive) -20 to +100 C Certifications: Material meets REACH and RoHS requirements (2011/65/EU). Printability: Specially designed laser printable material for product, logistics and industrial variable information applications. It can be also used in address labelling or other information labelling with difficult environmental conditions in SOHO end-uses. Due to the pre-treatment, the film is printable by common label printing methods like letterpress, flexography, screen and offset. Special inks designed for non-absorbent materials should be used. Laser and copier.

10 (EAB-PPBE/PPRD) Permanent, matte colored paper labels Facestock 82 (75-90) micron ISO 534 Adhesive 15 micron Liner (glassine) 52 (50-58) micron ISO 534 Shear Strength 100 min FTM 8 Initial Tack 10,3 N FTM 9 Peel Resistance Stainless Steel 15,4 N/25 mm FTM 1 (72 hours) Temperature Range (Adhesive) -20 to +80 C Certifications: Facestock: Packaging and packaging waste Directive 94/62/CE, Electric and electronic equipment (RoHS) Directive 2002/95/CE; Adhesive: Packaging and packaging waste Directive 94/62/CE, EN 71-3 Toy Safety, EN 71-9 Toy Safety, Direct contact with foodsuffs (ISEGA); Liner: Contact with foodstuff (BfR XXXVI), Packaging and packaging waste Directive 94/62/CE, EN 71-3 Toy Safety, Electric and electronic equipment (RoHS) Directive 2011/65/EU. Printability: Suited for full-color copying machines and laser printers.