TUNNEL PASTEURISER (50,000 BPH) Too Late! Sorry, we have sold this equipment already. However, we d be very glad to source similar equipment for you.

Transcription

1 TUNNEL PASTEURISER (50,000 BPH) Too Late! Sorry, we have sold this equipment already. However, we d be very glad to source similar equipment for you. Please tell us what you need and we ll do our best to find it for you!

2 Contact : info@wallart.fr BOTTLE WASHER (16,000 BPH) Too Late!

3 Sorry, we have sold this equipment already. However, we d be very glad to source similar equipment for you. Please tell us what you need and we ll do our best to find it for you! Contact : info@wallart.fr

4 GLASS FILLER-CAPPER FOR STILL PRODUCTS (2700 BPH) Filler-Capper built by EURO STAR Type MEC LD 12 / 1 C Year of manufacture filling heads 1 capping head Used for still products, is equipped to fill the following bottles Steinie 33 cl Long neck 33 cl Apo 33 cl Belgian beer 75 cl Champagne 75 cl Capacity : 2700 bph with 33 cl bottles 2000 bph with 75 cl bottles Capping head equipped to run with 26 mm and 29 mm caps. Automatic rotary system to fill flat and low density liquids. The opening of the filling valve is actuated by its contact with the neck-finish of the container raised by the supporting cylinder.

5 RGB LINE FOR CARBONATED DRINKS (6000 BPH) RGB line for carbonated drinks Capacity with all bottles : 6000 bph Runs from 0,25L up to 1 Litre bottles Kettner depalletiser type Press 1800 EP Kettner decrater 2 heads Rink decaper and 2 heads type KM740/2K

6 KETTNER crate washer type WAH 12 Ortmann + Herbst bottle washer type Contina 10 rows Ortmann + Herbst filler capper screw capper 50 valves ALCO screw capper for plastic caps Crown corker MEYER cap elevator Intermix O+H type 130 EIUD-C Labeller Anker cold glue 1 station Kettner crater 2 heads Crate controller Promecon with crate ejection Kettner crate palletiser

7

8 CAP ELEVATOR Cap elevator built in 2013 AMS Ferrari Group (italy) Height : 4 metres ZALKIN ALUMINIUM SCREW CAPPER 4 HEADS 4 heads installed (can be increased to 8 heads)

9 Current capacity : bph (could go up to bph) Equiped to run with 1 litre glass bottle (dam : 85 height : 285mm) Aluminium cap type Talg 28 mm The machine is pre-equiped to run with plastic caps 28mm Type CA4 360 NG With cap feeding system

10 CAN FILLER - SEAMER (44/6) Too Late! Sorry, we have sold this equipment already. However, we d be very glad to source similar equipment for you. Please tell us what you need and we ll do our best to find it for you! Contact : info@wallart.fr

11

12 CAN FILLER-SEAMER (12,000 CPH) Very nice can filler and seamer for still drinks and carbonated drinks Can type : / Sleek + Standard Can filler Made : Filling Systems Italy Type : ISO-C 30-4 Isobaric Year : 2003 Number of valves : 30 Seamer Made : SIMA Italy Type : 2000/4L Year : 2003 Number of heads : 4 Automation : Siemens S 7

13 CAN RINSER - FILLER - SEAMER (38,000 CPH) Too Late! Sorry, we have sold this equipment already. However, we d be very glad to source similar equipment for you. Please tell us what you need and we ll do our best to find it for you! Contact : info@wallart.fr

14 CORKER - WIREHOODER (5000 BPH) Bertolaso Corker Type Delta 406 S 6 corking heads Robino & Galandrino wirehooder

15 Type Rekord 6 Capacity : 5000 bph LINEAR LABELLER (4000 BPH) PE labeller Type Splendid L3 Paper pre-cut labels (partial and wrap around labels) Cold glue

16 Built in 2000 Capacity : up to 4000 bph Runs with several formats up to 75 cl bottle LABELLER (SELF ADHESIVE LABELS) BPH

17 Champagne type labeller KOSME TOP STAR sellets (7000 bph x 75cl) 4 self adhesive labelling stations 1 glue station for neck label Yom : 2 000

18 PET BOTTLE LABELLER ( BPH x 1,5 L) KRONES PET LABELLER Type CONTIROLL with hot glue unit Polypro labels in rolls Built in 2000 Currently running with 0,5 L and 1,5 L bottles

19 KEG FILLER (1 HEAD) Too Late! Sorry, we have sold this equipment already. However, we d be very glad to source similar equipment for you.

20 Please tell us what you need and we ll do our best to find it for you! Contact : info@wallart.fr KEG FILLING LINE (60 KEGS / HOUR) Keg filling line from GRUBER type KEGMATIK 4/1 with 5 heads 60 Kegs per hour Including : Keg conveyors, external washer, cleaning & filling line & CIP

21 SMI SHRINKWRAPPER (80 HITS / MINUTE) SMI shrinwrapper type SK800P Year of manufacture 2000 Currently runs on a can line 12 or 24 cans printed or neutral film with or without carton tray Groups 2 3 hi-cone

22 CARTON PACKING LINE (16 CARTONS / MINUTE) Carton packing unit OTOR SYSTEMS (F) & CERMEX (SIDEL) from 2007 Can work with both screw cap & mechanical cap 16 cartons per minute

23 3 formats : 100 cl x 12 (screw cap & mechanical cap) 75 cl x 12 & x 6 (screw cap & mechanical cap) 33 cl x 12 (screw cap) Carton erector OTOR SYSTEMS type FCO 140 S with ROBATECH gluer Belt conveyors between carton erector & internal separator applicator Internal separator applicator OTOR SYSTEMS type CRX 323 Plastic chain conveyor between internal separator applicator and crater Bottle crater CERMEX (SIDEL) type E478 with 4 heads Full bottle conveyors to feed the crater Plastic chain & belt conveyors between crater and carton sealer Carton sealer OTOR SYSTEMS type ECO 620 with ROBATECH gluer Can be inspected in production for few more weeks only

24 CARTON / CRATE PACKING LINE (25 CARTONS / MINUTE) Carton/crate packing unit Full KRONES from cartons per minute 3 formats : 4 packs of 6 bottles in 1 carton 6 packs of 4 bottles in 1 carton

25 24 bottles in 1 carton 1. Carton erector 25 cartons per minute KRONES Variocart type C-25 with NORDSON type 3400V gluer 2. Roll convoyrs between carton erector and packer/crater 3. Packer/crater for bottles and packs KRONES-KETTNER type Dinapac 2 E-30 with 3 heads (3 change-over parts to handle 2 sizes of packs or 24 bottles) Crate/carton in Longitudinal position 4. Carton sealer KRONES-KETTNER Variocol type H-60 with NORDSON type 3400V gluer 5. Carton/crate convoyeurs & bottle conveyor including electrical cabinets (PLC SIEMENS S7 & VLT DANFOSS) 6. Can be inspected in production for few more weeks only

26 PALLETIZER Too Late! Sorry, we have sold this equipment already. However, we d be very glad to source similar equipment for you. Please tell us what you need and we ll do our best to find it for you! Contact : info@wallart.fr

27 FILTER CLOTHS FOR MEURA 2001 MASH FILTERS Filtercloths for Meura 2001 mash filters : dimensions 1836 x 1636 mm filterfabric FP-0302 PP, 100 % PP, mono/monofilament, 270 g/m2, 1050 l/min/dm2, pore size 70 x 320 μm, calandered, black colour

28 KEG CAPS (TAMPER EVIDENT) Keg caps (tamper evident) We now sale tamper evident plastic closures for kegs. Keg caps are necessary to keep debris out of the valve and keep the product undisturbed during travel. A signature color, custom stamped or printed cap will also make your kegs stand out to others Our keg caps fit all types of extractor tubes : sankey spears, «A» type spears, triangular spears Benefits of our keg caps :

29 Can be placed manually or with an automatic capper on the extractor tube Protects against dust Sealing function Easy to open Can be personalized with your logo Many colors available Quick delivery Cap size available Ø 64 mm caps to be used with Sankey spears (S-Type tube). Come in boxes of 925 pieces Ø 69 mm caps to be used the Grundy type spear (triangular shaped tube) Come in boxes of 750 pieces Ø 74mm caps to be used with the round and flat spear («A» type tube) Come in boxes of 625 pieces Colours available All colors available, can be plain color or personalized with your logo and text (ingredient list..) Please question us for a quote confirming required quantities and type of cap needed (please send us your logo if you want a personalized cap)