COMPLETE REVISION September Process Industry Practices Piping. PIP PNSM0120 Purchasing Requirements for Bolting
|
|
- Paul Horace Warren
- 5 years ago
- Views:
Transcription
1 September 2013 Process Industry Practices Piping Purchasing Requirements for Bolting
2 PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice. This Practice is subject to revision at any time. Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas PIP member companies and subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the Practice solely for Authorized Users purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific project by Authorized User s client. PIP s copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party with copies of the Practice. PRINTING HISTORY March 2000 Issued September 2013 Complete Revision February 2008 Complete Revision Not printed with State funds
3 September 2013 Process Industry Practices Piping Purchasing Requirements for Bolting Table of Contents 1. Introduction Purpose Scope References... 2 Industry Codes and Standards Definitions Requirements General Design and Fabrication Testing, Inspection, and Rejection Documentation Shipping and Handling... 4 Process Industry Practices Page 1 of 4
4 Purchasing Requirements for Bolting September Introduction 1.1 Purpose This Practice provides purchasing requirements for bolting. 1.2 Scope This Practice describes the minimum requirements for purchasing bolting specified in PIP Piping Material Specifications. 2. References Applicable parts of the following industry codes and standards shall be considered an integral part of this Practice. The edition in effect on the date of contract award shall be used, except as otherwise noted. Short titles will be used herein where appropriate. Industry Codes and Standards 3. Definitions American Petroleum Institute (API) API RP Material Verification Program for New and Existing Alloy Piping Systems American Society of Mechanical Engineers (ASME) ASME B1.1 - Pipe Threads, General Purpose (Inch) ASME B Process Piping American Society for Testing and Materials (ASTM) ASTM A153 - Zinc Coating (Hot-Dip) on Iron and Steel Hardware ASTM A563 Carbon and Alloy Steel Nuts Process Industry Practices (PIP) VESPMI01 - Positive Material Identification Specification manufacturer: The party responsible for making the bolting owner: The party who owns the facility wherein the bolting will be used supplier: The party responsible for furnishing and/or installing the bolting purchaser: The party who awards the contract to the supplier. The purchaser may be the owner or the owner s authorized agent. Process Industry Practices Page 2 of 4
5 Purchasing Requirements for Bolting September Requirements 4.1 General Bolting shall be provided in accordance with the following requirements provided in the purchase order and this Practice: a. Sizes, lengths, and quantities b. Materials of construction c. Applicable standards & codes d. Handling and packaging Bolting not in accordance with the purchase order and this Practice shall be subject to rejection All conflicts between the requirements of the purchase order and this Practice shall be referred to the purchaser, in writing, for clarification and resolution before proceeding with the manufacture or procurement of the affected bolting Any substitutions to, or variance from, this Practice shall require the purchaser s written approval before implementation An established, routine, and documented quality control program shall be used. If requested, the quality control program shall be submitted to the purchaser for approval. 4.2 Design and Fabrication Unless otherwise specified in the purchase order, one nut shall be furnished with each machine bolt and two nuts with each stud bolt Bolting shall be marked in accordance with the applicable ASTM/ASME standards Unless specified otherwise, galvanized bolting shall be hot dipped in accordance with ASTM A Bolts shall have ASME B1.1 class 2A thread before galvanizing Nuts shall be tapped oversize after coating in accordance with ASTM A Unless specified otherwise, bolts shall be fully threaded studs. 4.3 Inspection and Testing All testing (including chemical, tensile, hardness, proof load, and impact testing) required by the applicable ASTM standards and the purchase order shall be performed Hardness testing for strain hardened stainless steel bolting shall be in accordance with ASME B For all design temperatures, the maximum hardness shall be Rockwell C35 immediately under the thread roots. Process Industry Practices Page 3 of 4
6 Purchasing Requirements for Bolting September The hardness shall be taken on a flat area at least 3 mm (1/8 inch) across, prepared by removing threads. No more material than necessary shall be removed to prepare the area Hardness determination shall be made at the same frequency as tensile tests All facilities, materials, and fabrication work associated with the bolting shall be subject to inspection by the purchaser Positive Material Identification (PMI) of alloy material shall be performed by the supplier in accordance with PIP VESPMI01 and API RP 578 if specified in the purchase order Acceptance of the bolting by the purchaser shall not relieve the supplier of the responsibility to provide the bolting in accordance with the requirements of this Practice and the purchase order. 4.4 Documentation All documentation required herein shall be identified with the specific materials represented. All documentation shall be available for review by the purchaser at the time and place of inspection Material test reports shall be provided if specified in the purchase order Documentation other than that specified in this Practice shall be provided in accordance with the purchaser s request for quotation and/or purchase order. 4.5 Shipping and Handling Bolting shall be suitably packaged to protect against damage during handling and shipment Non-galvanized carbon steel and ferro-alloy (up to 12 Cr) bolting shall be suitably protected from environmental corrosion for shipment and storage Bolting of different materials of construction, styles, and sizes shall be packaged separately Unless otherwise specified, package markings shall be in English In addition to the receiving address, each box, crate, or bag shall be durably marked with purchaser s part identification number, complete purchase order number, length, quantity, and product specification bolting type. Process Industry Practices Page 4 of 4
PIP PNSM0115 Purchasing Requirements for Pipe
December 2016 Piping PIP Purchasing Requirements for Pipe PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared
More informationPIP STF05520 Details for Pipe Railing for Walking and Working Surfaces
TECHNICAL CORRECTION January 2017 Structural PIP STF05520 Details for Pipe Railing for Walking and Working Surfaces PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
More informationEDITORIAL REVISION January Process Industry Practices Vessels. PIP VEFV1100M Vessel/S&T Heat Exchanger Standard Details (Metric Units)
Vessels PIP VEFV1100M Vessel/S&T Heat Exchanger Standard Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared
More informationREAFFIRMATION WITH EDITORIAL REVISION September Process Industry Practices Insulation. PIP INIH1000 Hot Insulation Installation Details
REAFFIRMATION WITH EDITORIAL REVISION September 2012 Process Industry Practices Insulation PIP INIH1000 Hot Insulation Installation Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to
More informationPIP STF05521 Details for Angle Railings for Walking and Working Surfaces
TECHNICAL CORRECTION January 2017 Structural PIP STF05521 Details for Angle Railings for Walking and Working Surfaces PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of
More informationPIP VEFV1100 Vessel/S&T Heat Exchanger Standard Details (U.S. Customary Units)
TECHNICAL CORRECTION February 2014 Process Industry Practices Vessels PIP VEFV1100 Vessel/S&T Heat Exchanger Standard Details (U.S. Customary Units) PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an
More informationPIP VEFV1100 Vessel/S&T Heat Exchanger Standard Details (U.S. Customary Units)
TECHNICAL REVISION October 2017 Vessels PIP VEFV1100 Vessel/S&T Heat Exchanger Standard Details (U.S. Customary Units) PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of
More informationPIP RFTB1000 Brick Refractory Installation Qualification, Inspection, and Testing
EDITORIAL REVISION March 2013 Process Industry Practices Refractory PIP RFTB1000 Brick Refractory Installation Qualification, Inspection, and Testing PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an
More informationPIP STF05511 Fixed Industrial Stairs
TECHNICAL CORRECTION January 2017 Structural PIP STF05511 Fixed Industrial Stairs PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
More informationPIP RFTA1000 Refractory Anchor and Accessory Installation Qualification, Inspection, and Testing
January 2017 Refractory PIP RFTA1000 Refractory Anchor and Accessory Installation Qualification, Inspection, and Testing PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost
More informationPIP RFTF1000 Ceramic Fiber Refractory Installation Qualification, Inspection, and Testing
EDITORIAL REVISION March 2013 Process Industry Practices Refractory PIP RFTF1000 Ceramic Fiber Refractory Installation Qualification, Inspection, and Testing PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
More informationREAFFIRMATION WITH EDITORIAL REVISION October Process Industry Practices Insulation. PIP INIC1000 Cold Insulation Installation Details
REAFFIRMATION WITH EDITORIAL REVISION October 2012 Process Industry Practices Insulation PIP INIC1000 Cold Insulation Installation Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to
More informationPIP VESSP002 Supplemental Design and Fabrication Specification for Shell and Plate Heat Exchangers ASME Code Section VIII, Divisions 1 and 2
November 2014 Process Industry Practices Vessels PIP VESSP002 Supplemental Design and Fabrication Specification for Shell and Plate Heat Exchangers ASME Code Section VIII, Divisions 1 and 2 PURPOSE AND
More informationCOMPLETE REVISION October Process Industry Practices Piping. PIP PNSC0036 High Density Polyethylene (HDPE) Piping Installation Specification
Piping High Density Polyethylene (HDPE) Piping Installation Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has
More informationPIP ARS08111 Standard Steel Doors and Frames Supplier Specification
May 2018 Architectural PIP ARS08111 Standard Steel Doors and Frames Supplier Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
More informationCOMPLETE REVISION November Process Industry Practices Architectural. PIP ARS08111 Standard Steel Doors and Frames Supplier Specification
November 2012 Process Industry Practices Architectural PIP ARS08111 Standard Steel Doors and Frames Supplier Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost
More informationPIP STF05501 Fixed Ladders Fabrication Details
COMPLETE REVISION July 2018 Structural PIP STF05501 Fixed Ladders Fabrication Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this
More informationMarch Process Industry Practices Refractory. PIP RFIA1000 Refractory Anchor and Accessory Installation Details
March 2014 Process Industry Practices Refractory PIP RFIA1000 Refractory Anchor and Accessory Installation Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
More informationPipeline Systems PIP PLSC0013 Non-Destructive Examination of ASME B31.4 and B31.8 Metallic Pipelines
February 2017 Pipeline Systems PIP PLSC0013 Non-Destructive Examination of ASME B31.4 and B31.8 Metallic Pipelines PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
More informationPIP PNC00001 Pipe Support Criteria for ASME B31.3 Metallic Piping
July 2017 Piping PIP PNC00001 Pipe Support Criteria for ASME B31.3 Metallic Piping PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
More informationElectrical PIP ELILS000 Lighting and Receptacle Installation Details for Class I, Division 2, Class II, Division 2, and Unclassified Areas
August 2017 Electrical PIP ELILS000 Lighting and Receptacle Installation Details for Class I, Division 2, Class II, Division 2, and Unclassified Areas PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an
More informationCOMPLETE REVISION January Process Industry Practices Electrical. PIP ELIGD000 Grounding Installation Details
COMPLETE REVISION January 2010 Process Industry Practices Electrical PIP ELIGD000 Grounding Installation Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
More informationCOMPLETE REVISION November Process Industry Practices Structural. PIP STF05530 Grating Fabrication Details
COMPLETE REVISION November 2006 Process Industry Practices Structural PIP STF05530 Grating Fabrication Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
More informationEDITORIAL REVISION August Process Industry Practices Insulation. PIP INEG2000 Guidelines for Use of Insulation Practices
August 2013 Process Industry Practices Insulation PIP INEG2000 Guidelines for Use of Insulation Practices PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry
More informationMarch Process Industry Practices Structural. PIP STE05535 Vessel Circular Platform Detail Guidelines
Structural PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing
More informationPIP PCEPA003 Process Analyzer System Field Installation Guidelines
January 2016 Process Control PIP PCEPA003 Process Analyzer System Field Installation Guidelines PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
More informationPIP STE05501 Fixed Ladders and Cages Design Guide
TECHNICAL CORRECTION January 2017 Structural PIP STE05501 Fixed Ladders and Cages Design Guide PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
More informationCOMPLETE REVISION April Process Industry Practices Piping. PIP PNC00004 Piping Stress Analysis Criteria for ASME B31.
April 2012 Process Industry Practices Piping PIP PNC00004 Piping Stress Analysis Criteria for ASME B31.3 Metallic Piping PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost
More informationPIP INSA1000 Acoustic Insulation Systems Specification
TECHNICAL REVISION April 2015 Insulation PIP INSA1000 Acoustic Insulation Systems Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
More informationPIP PNEM0001 Piping Service Index
REAFFIRMATION W/EDITORIAL REVISION October 2016 Piping PIP PNEM0001 Piping Service Index PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
More informationPipeline Systems PLSC0017 Requirements for Welder Qualifications in Accordance with ASME Section IX
June 2018 Pipeline Systems PLSC0017 Requirements for Welder Qualifications in Accordance with ASME Section IX PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
More informationCOMPLETE REVISION May Process Industry Practices Piping. PIP PNSM0110 Purchasing Requirements for Valves
May 2013 Process Industry Practices Piping Purchasing Requirements for Valves PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
More informationPIP INSR1000 Installation of Flexible, Removable/Reusable Insulation Covers for Hot Insulation Service
TECHNICAL REVISION August 2015 Insulation PIP INSR1000 Installation of Flexible, Removable/Reusable Insulation Covers for Hot Insulation Service PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort
More informationEDITORIAL REVISION March Process Industry Practices Refractory. PIP RFSM1000 Monolithic Refractory Material Specification
March 2013 Process Industry Practices Refractory PIP RFSM1000 Monolithic Refractory Material Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry
More informationCOMPLETE REVISION June Process Industry Practices Architectural. PIP ARS08390 Blast Resistant Doors, Frames, and Related Hardware Specification
June 2013 Process Industry Practices Architectural PIP ARS08390 Blast Resistant Doors, Frames, and Related Hardware Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
More informationPIP RFTM1000 Monolithic Refractory Installation Qualification, Inspection, and Testing
March 2013 Process Industry Practices Refractory PIP RFTM1000 Monolithic Refractory Installation Qualification, Inspection, and Testing PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
More informationPIP REEE002 Reliability Indicators for Rotating Machinery
June 2016 Machinery PIP REEE002 Reliability Indicators for Rotating Machinery PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
More informationCOMPLETE REVISION February Process Industry Practices Structural. PIP STS05130 Structural and Miscellaneous Steel Erection Specification
COMPLETE REVISION February 2011 Structural PIP STS05130 Structural and Miscellaneous Steel Erection Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
More informationCorrosion Resistant Bolting for Use in the Petroleum and Natural Gas Industries
Corrosion Resistant Bolting for Use in the Petroleum and Natural Gas Industries API SPECIFICATION 20F FIRST EDITION, XXX 201X 1 1. Scope 1.1 Purpose This API specification specifies requirements for the
More informationITEM 442 METALS FOR STRUCTURES
AFTER NOVEMBER 1, 2008 ITEM 442 METALS FOR STRUCTURES 442.1 Description. These specifications shall govern for materials such as structural steel, wrought iron, bronze, and other metals used in structures,
More informationPIP ARS08710 Standard Steel Door Hardware Supplier Specification
April 2018 Architectural PIP ARS08710 Standard Steel Door Hardware Supplier Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
More informationPIP PNSC0011 Installation of ASME B31.3 Metallic Piping
February 2015 Piping PIP PNSC0011 Installation of ASME B31.3 Metallic Piping PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
More informationMechanical Requirements for Stainless Steel & Non-Ferrous Fasteners
Mechanical Requirements for Steel & Non-Ferrous Fasteners Grade(1 ) General Descriptio n of Material Bolts, Screws and Studs Full Size Bolts, Screws, Studs Yield (2) Strengt h Min Tensile Strengt h Min
More informationMATERIAL REQUISITION FOR BOLTS AND NUTS
Title: MATERIAL REQUISITION FOR BOLTS AND NUTS Page: 1 of 12 MATERIAL REQUISITION FOR BOLTS AND NUTS 6 5 4 3 2 1 0 08-JUN-2013 ISSUED FOR APPROVAL M. KAMALOU A.MOHAMADIZADE A.MOHAMADIZADE REV. DATE STATUS
More informationPIP VESST002 Supplemental Design and Fabrication Specification for Shell and Tube Heat Exchangers ASME Code Section VIII, Divisions 1 and 2
March 2012 Process Industry Practices Vessels PIP VESST002 Supplemental Design and Fabrication Specification for Shell and Tube Heat Exchangers ASME Code Section VIII, Divisions 1 and 2 PURPOSE AND USE
More informationPIP VESST002 Supplemental Design and Fabrication Specification for Shell and Tube Heat Exchangers ASME Code Section VIII, Divisions 1 and 2
April 2018 Vessel Supplemental Design and Fabrication Specification for Shell and Tube Heat Exchangers ASME Code Section VIII, Divisions 1 and 2 PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort
More information1. Base plates, setting plates and anchor rods for columns. 8. Lintels if connected to structural steel columns.
PAGE 051200-1 SECTION 051200 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification sections,
More informationGUJARAT NARMADA VALLEY FERTILIZERS & CHEMICALS LIMITED
CONTENTS 1. Scope 2. Referenced Documents 3. Abbreviations 4. Materials and Manufacture 5. Dimensions 6. Inspections and Tests 7. Markings 8. Preparation for Shipment - 1 - 1. Scope 1.1 This specification
More informationPIP CTSC1000 Application of Coatings to Concrete
REAFFIRMATION WITH EDITORIAL REVISION July 2017 Coatings PIP Application of Coatings to Concrete PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
More informationFOR PROJECTS INITIATED AFTER NOVEMBER 1, 2008 REVISION 7 ITEM 516 INSTALLATION OF FLEX BEAM GUARDRAIL
AFTER NOVEMBER 1, 2008 ITEM 516 INSTALLATION OF FLEX BEAM GUARDRAIL 516.1 Description. This item shall govern for furnishing and placing 10 or 12 gauge galvanized flex beam guardrail, complete with timber
More informationSTANDARD SPECIFICATION FOR ALUMINUM FRAMING FOR RAILROAD PASSENGER SHELTERS
SOUTHEASTERN PENNSYLVANIA TRANSPORTATION AUTHORITY 1234 MARKET STREET, PHILADELPHIA, PA 19107 STANDARD SPECIFICATION FOR ALUMINUM FRAMING FOR RAILROAD PASSENGER SHELTERS REVISION DATE SPECIFICATION # F-S-304_
More informationSECTION METAL FABRICATIONS FOR STEAM UTILITY DISTRIBUTION
PAGE 055015-1 SECTION 055015 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification sections,
More informationCITY OF FARGO SPECIFICATIONS SIGNING
SECTION 4300 SIGNING PART 1 DESCRIPTION OF WORK The work to be done under this section of the Specifications and the accompanying plans consists of furnishing all labor, material and accessories necessary
More informationCOMPLETE REVISION February Process Industry Practices Structural. PIP STS05120 Structural and Miscellaneous Steel Fabrication Specification
COMPLETE REVISION February 2011 Structural PIP STS05120 Structural and Miscellaneous Steel Fabrication Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
More informationMATERIAL SPECIFICATION FOR STEEL TRUSS BRACKETS
ONTARIO PROVINCIAL STANDARD SPECIFICATION OPSS.MUNI 2426 NOVEMBER 2017 MATERIAL SPECIFICATION FOR STEEL TRUSS BRACKETS TABLE OF CONTENTS 2426.01 SCOPE 2426.02 REFERENCES 2426.03 DEFINITIONS - Not Used
More informationProduct Guide Specification
HALFEN USA Inc. March 2012 8521 FM 1976 P.O. Box 547 Converse, TX 78109 Toll Free 800-423-9140 Fax 888-277-1695 Website www.halfenusa.com E-mail info@halfenusa.com Product Guide Specification Specifier
More informationSECTION MISCELLANEOUS METALS
PART 1 GENERAL 1.1 WORK OF THIS SECTION A. Contractor shall provide all labor, materials, equipment and incidentals as shown, specified and required to furnish and install all miscellaneous metal fabrications
More informationMATERIAL AND EQUIPMENT STANDARD FOR PIGS ORIGINAL EDITION JULY 1997
MATERIAL AND EQUIPMENT STANDARD FOR PIGS ORIGINAL EDITION JULY 1997 This standard specification is reviewed and updated by the relevant technical committee on Dec. 2000. The approved modifications are
More informationSection 906. STRUCTURAL STEEL
906.01 Section 906. STRUCTURAL STEEL 906.01. General Requirements. Finished rolled shapes must be free from imperfections that affect strength and durability in accordance with ASTM A 6. Rolled shapes
More informationCorrosion Resistant Bolting for Use in the Petroleum and Natural Gas Industries
Corrosion Resistant Bolting for Use in the Petroleum and Natural Gas Industries API SPECIFICATION 20F SECOND EDITION, XXXXX 201X API MONOGRAM PROGRAM EFFECTIVE DATE: XXXXXXXXXX XX, 201X Corrosion Resistant
More informationCITY OF FARGO SPECIFICATIONS SIGNING
SIGNING PART 1 DESCRIPTION OF WORK The work to be done under this section of the Specifications and the accompanying plans consists of furnishing all labor, material and accessories necessary to complete
More informationSECTION STRUCTURAL STEEL
SECTION 051200 STRUCTURAL STEEL PART 1 GENERAL 1.01 SECTION INCLUDES A. Structural steel framing members and support members. B. Base plates, shear stud connectors. C. Grouting under base plates. 1.02
More information05510: TAPERED STEEL TROLLEY POLES AND ACCESSORIES
PART 1 GENERAL 1.01 DESCRIPTION A. The Vendor shall fabricate, furnish, test and deliver tapered steel trolley poles, including base plates, reinforced hand holes, anchor bolts, nuts and washers, and accessories
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 5643Q Issued OCT 1951 Revised JAN 2003 Superseding AMS 5643P Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution
More informationMILITARY SPECIFICAIION TANK, FUEL, AIRCRAFT, SELF-SEALING
26 July 1983 SUPERSEDING AMENDMENT 4 26 January 1981 MILITARY SPECIFICAIION TANK, FUEL, AIRCRAFT, SELF-SEALING This amendment forms a part of Military Specification MIL-T-5578C, dated 31 July 1963, and
More informationCOMMERCIAL ITEM DESCRIPTION SLING, PALLET
[INCH-POUND] 19 JULY 1999 SUPERSEDING MIL-S-3905D 19 July 1983 COMMERCIAL ITEM DESCRIPTION SLING, PALLET The General Services Administration has authorized the use of this commercial item description for
More informationSECTION STRUCTURE MOUNT RAILING SYSTEM
SECTION 05520 STRUCTURE MOUNT RAILING SYSTEM Peak Fall Protection specializes in the design, engineering, fabrication, installation, and certification of fall protection safety systems. Our team of safety
More informationInsulating Cellular Concrete Steel Joists Painting. A. America Society for Testing and Materials (ASTM):
SECTION 05120 STRUCTURAL STEEL PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 03342 - Insulating Cellular Concrete. 2. 05210 - Steel Joists. 3. 09900 - Painting. 1.02 REFERENCES A. America Society
More informationSECTION STRUCTURAL STEEL FRAMING
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 05 12 00 SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between // ---// if not applicable to project. Also delete any other item or paragraph
More informationMATERIAL SPECIFICATION FOR FRAMES, GRATES, COVERS, AND GRATINGS
ONTARIO PROVINCIAL STANDARD SPECIFICATION OPSS.PROV 1850 APRIL 2018 (Formerly OPSS 1850, April 2013) Note: The PROV published in April 2018 replaces OPSS 1850 COMMON, April 2013 with no technical content
More informationITEM 686 TRAFFIC SIGNAL POLE ASSEMBLIES (STEEL)
ITEM 686 TRAFFIC SIGNAL POLE ASSEMBLIES (STEEL) 686.1. Description. This Item shall govern for designing, fabricating, furnishing and erecting steel traffic signal pole assemblies of the various types
More informationSECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS
SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and
More informationFF-B-575C May 26, 1970 SUPERSEDING Fed. Spec. FF-B-575B September 12, 1960 Fed. Spec. FF-B-571A (In part) January 9, 1934 FEDERAL SPECIFICATION
FEDERAL SPECIFICATION BOLTS, HEXAGON AND SQUARE May 26, 1970 SUPERSEDING Fed. Spec. FF-B-575B September 12, 1960 Fed. Spec. FF-B-571A (In part) January 9, 1934 This specification was approved by the Commissioner,
More information1.0 INTRODUCTION GENERAL SUPPLIER S RESPONSIBILITY CODES AND STANDARDS... 4
TABLE OF CONTENTS 1.0 INTRODUCTION... 3 1.1 GENERAL... 3 1.2 SUPPLIER S RESPONSIBILITY... 3 2.0 CODES AND STANDARDS... 4 2.1 CODES, STANDARDS AND REGULATIONS... 4 2.2 NEPTUNE ENERGY NETHERLANDS B.V. SPECIFICATIONS...
More informationSPECIFICATION: LINE TAPS FOR ALUMINIUM/ACSR AND COPPER CONDUCTORS
Page no. :1 of 11 SPECIFICATION: LINE TAPS FOR ALUMINIUM/ACSR AND COPPER CONDUCTORS Prepared by: Eng. T. Lev (-חתום-) Checked by: I. Bester (-חתום (- Approved by: Eng. Y. Samoocha (-חתום (- 1 Page no.
More informationSECTION 716 SIGN MATERIALS SCOPE
716 716.01.01 MATERIALS COVERED SECTION 716 SIGN MATERIALS SCOPE A. This specification covers the kind and quality of materials used in the construction and fabrication of traffic control devices used
More informationStandard Specification for Stainless Steel Metric Bolts, Screws, and Studs 1
Designation: F 738M 02 METRIC Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs 1 This standard is issued under the fixed designation F 738M; the number immediately following the
More informationFacility Repairs - MCAS Cherry Point - Tank Farm A SECTION STRUCTURAL STEEL 05/14
SECTION 05 12 00 STRUCTURAL STEEL 05/14 PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the
More informationTomorrows Fastener Materials NKF Haugesund April 14 th 2016
Tomorrows Fastener Materials NKF Haugesund April 14 th 2016 High temperature material (ASME) Carbon steel materials for high pressure + high temperature Bolt material Nut material Temp. range B7 2H -30
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-23 33 56 (February 2009) ----------------------------- Preparing Activity: USACE Superseding UFGS-23 33 56 (April 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
More information.1 ANSI/ASME B31.1, Power Piping, (SI Edition)..2 American Society for Testing and Materials (ASTM)
Fitness Facility Addition Page 1 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 03300 - Cast-in-Place Concrete.2 Section 05121 - Structural Steel for Buildings.3 Section 05500 - Metal Fabrications 1.2 REFERENCES.1
More informationASTM, SAE AND ISO GRADE MARKINGS AND MECHANICAL PROPERTIES FOR STEEL FASTENERS
ASTM, SAE AND ISO GRADE MARKINGS AND MECHANICAL PROPERTIES FOR STEEL FASTENERS Nominal Mechanical Properties Identification Grade Specification Fastener Description Material Size Range (in.) Proof Load
More informationSECTION LATCHWAYS CONSTANT FORCE POSTS
PART 1 GENERAL 1.1 SYSTEM DESCRIPTION SECTION 112429 LATCHWAYS CONSTANT FORCE POSTS A. Type of system required: Constant Force Posts (CFP(s)) Use with Latchways Lifeline or single point anchors B. System
More informationSECTION STEEL WINDOWS UL Labeled Fire-Rated Fixed Lite (950) Use Tools / Options / View / Hidden Text to view hidden notes and edit.
SECTION 08510 STEEL WINDOWS UL Labeled Fire-Rated Fixed Lite (950) Use Tools / Options / View / Hidden Text to view hidden notes and edit. PART 1 GENERAL 1.1 SECTION INCLUDES A. Fire Rated Steel Windows
More informationEvaluation of Highway Guardrail Manufacturers
NTPEP Committee Work Plan for Evaluation of Highway Guardrail Manufacturers NTPEP Designation: GRL-17-01 National Transportation Product Evaluation Program 444 North Capitol Street N.W., Suite 249 Washington,
More informationSECTION STEEL WINDOWS UL Labeled Fire-Rated Fixed Lite (950) Use Tools / Options / View / Hidden Text to view hidden notes and edit.
SECTION 08510 STEEL WINDOWS UL Labeled Fire-Rated Fixed Lite (950) Use Tools / Options / View / Hidden Text to view hidden notes and edit. PART 1 GENERAL 1.1 SECTION INCLUDES A. Fire Rated Steel Windows
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-08 56 63 (April 2006) --------------------------- Preparing Activity: NAVFAC Replacing without change UFGS-11191 (September 1999) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationAPI 570 Certification Prep API 578 Study Questions
This following study aid helps you learn the content of API RP-578, Material Verification Program for New and Existing Alloy Piping Systems. There will be about 5 questions from this document on the API
More informationPIP STE05501 Fixed Ladders Design Guide
July 2018 Structural PIP STE05501 Fixed Ladders Design Guide PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared
More informationMETALS Commissioning of Metals Structural Steel Framing Steel Studs... 2
~ 05-1 ~ 05 00 00 Metals 05 00 00 METALS... 2 05 08 00 Commissioning of Metals... 2 05 12 00 Structural Steel Framing... 2 05 12 30 Steel Studs... 2 05 45 00 METAL SUPPORT ASSEMBLIES... 2 05 50 00 METAL
More informationB. All materials shall be listed by an OSHA approved Nationally Recognized Testing Laboratory (NRTL).
16936 STAGE LIGHTING RIGGING (COUNTERWEIGHT) *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number: 11
More informationSECTION SHOWER AND DRESSING COMPARTMENTS
SECTION 10 21 16 SHOWER AND DRESSING COMPARTMENTS SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes:
More informationITEM 442 METAL FOR STRUCTURES
ITEM 442 METAL FOR STRUCTURES 442.1. Description. This Item shall govern for all structural steel, high strength bolts, forgings, steel castings, iron castings, wrought iron, bronze, steel pipe and tubing,
More informationSpecification for Pipe Fittings
Specification for Pipe Fittings Specification for Pipe Fittings Page 1 of 11 Table of Contents 1.0 SCOPE...3 2.0 DEFINITIONS...3 3.0 REFERENCES, CODES AND STANDARDS...3 4.0 CONTRACTOR'S RESPONSIBILITIES...4
More informationA. American Society for Testing and Materials (ASTM):
SECTION 05500 METAL FABRICATIONS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 03300 - Cast-In-Place Concrete. 2. 03420 - Precast, Prestress Concrete Sections. 3. 04420 - Concrete Unit Masonry. 4.
More informationDBI-SALA Uni 8 Horizontal Lifeline Cable System
SECTION 112429.17 - HORIZONTAL FALL PROTECTION - CABLE PART 1 - GENERAL 1.1 SECTION INCLUDES A. Provide horizontal cable fall protection system, including end anchors, energy absorbers, intermediate cable
More informationWhat is the difference between the material specifications for A106 Grade B Seamless pipe and A53 Grade B (Type S) seamless pipe?
WHITEPAPER WHITEPAPER: Seamless A106B & A106C vs Seamless A53B What is the difference between the material specifications for A106 Grade B Seamless pipe and A53 Grade B (Type S) seamless pipe? We are sometimes
More informationXI'AN LINKUN STEEL PIPE CO., LTD
Designation: A 50 0 (Reapproved 2005) Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing This standard is issued under the fixed designation A 50; the number immediately
More informationCONSTRUCTION SPECIFICATION FOR EXPANDED METAL ANTI-GLARE SCREEN
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 791 NOVEMBER 2014 CONSTRUCTION SPECIFICATION FOR EXPANDED METAL ANTI-GLARE SCREEN TABLE OF CONTENTS 791.01 SCOPE 791.02 REFERENCES 791.03 DEFINITIONS
More information